How to Install a Water Pump for GM 3.1L V6. Engine - Advance Auto Parts

  Рет қаралды 160,587

Advance Auto Parts

Advance Auto Parts

Күн бұрын

Пікірлер: 54
@brah1442
@brah1442 3 жыл бұрын
What a wonderful spot for a water pump. 😌
@drvonschwartz
@drvonschwartz 4 жыл бұрын
Bought my water pump from Advance. Very pleased to find a BS free video from the same company.
@popd8830
@popd8830 9 жыл бұрын
Thanks a bunch for this video. I just spent the last 8 hours doing this alone (without proper tools for the belt sadly and other assistance where 2 people would help). Without this video I wouldn't have been able to finish it. Thanks a bunch, now hopefully when I get some sunshine I can see if I did it successfully.
@jacobmarley2417
@jacobmarley2417 5 жыл бұрын
only vid i saw to give pump torque specs! thanks advance auto! 89 inch pounds!
@kubotaman85
@kubotaman85 3 жыл бұрын
just make it snug by feel
@RhinoConstructionRemodelingLLC
@RhinoConstructionRemodelingLLC 15 күн бұрын
List of tools and sockets you are using ?
@zachcrouse9319
@zachcrouse9319 8 жыл бұрын
Any tips for getting a stubborn pulley off the pump?
@lorettatenney3234
@lorettatenney3234 2 жыл бұрын
What is the part called that the water pump bolts into???
@mronemanband1
@mronemanband1 2 жыл бұрын
the block
@omertsclan1421
@omertsclan1421 7 жыл бұрын
What all tools do i need to change the water pump
@angleturner
@angleturner 5 жыл бұрын
THANK YOU for a very helpful video. Saved me a few hundred bucks labor, at least. New wp is only $25.
@mr_m4613
@mr_m4613 5 ай бұрын
25 dollars for a water pump? New or used?
@WPGinterceptor460Interceptor
@WPGinterceptor460Interceptor 2 жыл бұрын
my car is leaking where the bleeder valve meets the water pump housing! is there gasket?
@nickhatton7055
@nickhatton7055 10 жыл бұрын
Thanks for the video.
@willowrabbit
@willowrabbit 4 жыл бұрын
I can't get the pulley wheel off the water pump. Its rusted on tight. All videos i see it just falls off for people so any advice on getting it loose? thank you
@EZ4U2Say11
@EZ4U2Say11 3 жыл бұрын
Impact wratchet and use a big screwdriver to wedge between two of the bolts to hold it still
@willowrabbit
@willowrabbit 3 жыл бұрын
@@EZ4U2Say11 A big rubber mallet did the trick
@DarksideJohnny
@DarksideJohnny 3 жыл бұрын
Thanks for tutorial, bought the lifetime warranty for $32.95. Great counter service. All employees wearing mask.
@azimmey
@azimmey 4 жыл бұрын
Awesome video. Thanks.
@bigpaulallen5745
@bigpaulallen5745 5 жыл бұрын
Great job on your video appreciate ya
@Curlynoles
@Curlynoles 7 жыл бұрын
how do i remove the housing wer the water pump sits on
@natebomb453
@natebomb453 10 жыл бұрын
link to coolant flush tutorial isnt working....
@aladinsarsipeus
@aladinsarsipeus 4 жыл бұрын
great video
@PincheKriss
@PincheKriss 9 жыл бұрын
I torqued my water pump bolts 89 as instructed but a head broke off why is this?
@jjibarra43
@jjibarra43 9 жыл бұрын
in or ft?
@jgireby
@jgireby 6 жыл бұрын
Kriss Villalobos Are you sure you used inch pounds and not foot pounds. If you used foot pounds it would have broken the head off of the bolt.
@kennydavis2276
@kennydavis2276 5 жыл бұрын
"Replace the belt and torque the pulley bolts".LOL. Easier said than done. The belt will not hold the pulley while torquing.
@Mac10Massagegun
@Mac10Massagegun 2 жыл бұрын
I love gm
@hugh3rdof5
@hugh3rdof5 8 жыл бұрын
At about min 3:40, we're told "you need to check the tensioner, to make sure it's within specs." Ok, so how does one do that? Less than helpful to put a boilerplate instruction in there without explaining or demonstrating...
@Smokescreen0000
@Smokescreen0000 3 жыл бұрын
Seems easy enough.
@bigmome66
@bigmome66 7 жыл бұрын
can I just disconnect that big hose going into water pump to drain coolant?
@kubotaman85
@kubotaman85 3 жыл бұрын
Yes you can
@hamelton549
@hamelton549 6 жыл бұрын
IT SURE WOULD BE NICE TO TELL US WHAT SIZE BOLT HOLDS THE BELT SHIELD!
@angleturner
@angleturner 5 жыл бұрын
And it would be nice if you weren't so dumb (as to not be easily enough able to figure that out for yourself,... you have no selection of wrenches or sockets ?) and so rude as well TO BE YELLING IN ALL CAPS. The video was extemely well thought out, produced, filmed, narrated, and helpful. (except to rude dummies)
@jacksmack6956
@jacksmack6956 Жыл бұрын
8mm
@warrenbusiness3215
@warrenbusiness3215 3 жыл бұрын
Ok
@kubotaman85
@kubotaman85 8 жыл бұрын
You're using the wrong coolant in that GM vehicle! You are supposed to use DEX COOL in GM vehicle
@kubotaman85
@kubotaman85 7 жыл бұрын
Yes you do have to use dex cool in GM vehicles! it clearly says "Use Dex Cool" under the hood of GM vehicles. By the way have fun with your sensors failing prematurely
@kubotaman85
@kubotaman85 7 жыл бұрын
Kyle Skinner it clearly says under the hood "use Dex Cool
@kubotaman85
@kubotaman85 7 жыл бұрын
Kyle Skinner yes you do!
@alexsbikesandmotors
@alexsbikesandmotors 7 жыл бұрын
there's no reason why you need to use Dex cool in any gm vehicle. Any regular green antifreeze is fine. I've got an older version of this same 3.1 V6 in my camaro that was made a few years before Dex cool and it just says "engine coolant" on the tank.
@kubotaman85
@kubotaman85 7 жыл бұрын
Yes there is! It clearly says under the hood of GM vehicles "use Dexcool"
3.1 water pump replacement, 2000 Chevrolet Malibu
8:10
Robinson's Auto Repair
Рет қаралды 245 М.
How to Install a Water Pump on a GM 5 3L V8 Engine - Advance Auto Parts
4:22
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 46 МЛН
One day.. 🙌
00:33
Celine Dept
Рет қаралды 77 МЛН
How to install a Water Pump: 1994 - 2005 Buick Century 3.1L V6 WP-625 AW5033
4:41
Airtex-ASC Performance Pumps
Рет қаралды 182 М.
Ignition Coil Replacement - GM 3100
4:41
Standard Brand
Рет қаралды 65 М.
SYMPTOMS OF A BAD WATER PUMP
2:24
EasyAutoFix
Рет қаралды 945 М.
How To Replace a Water Pump and Save $783
13:29
ChrisFix
Рет қаралды 3,1 МЛН
How to Install a Water Pump: 1999 - 2005 Pontiac Grand Am 3.4L V6 WP-625 AW5033
4:41
Airtex-ASC Performance Pumps
Рет қаралды 226 М.
3.1/3.4 WATERPUMP REPLACEMENT
19:26
JoeTheAutoGuy
Рет қаралды 230 М.