Alfaobd | Alpharex Pro series Headlight programming LED/HID Lighting (4th Gen Ram 1500/2500/3500)

[@mikedrake1900]

So I’ve recently got the alpharex nova g2 lights. Turn signals aren’t working and the start up sequence isn’t working properly either. I’m guessing I’m needing to do this, what obd scan tool do you recommend and is there any other software I need to purchase for 2018 ram 3500

[@MKSPerformanceOffroad]

I would recommend obdlink mx+, android device with alfaobd and you will require a security gateway module bypass to program. Search facebook for Matt Dougherty as he should have plenty in stock. You may also find them through Kaod tech or M2mods. The one I use is from Kaod tech, not sure if he is still making them. Happy modding! 🇺🇲🦅👨‍🔧

[@mikedrake1900]

@@MKSPerformanceOffroad Is there one for Apple rather than android?

[@MKSPerformanceOffroad]

@@mikedrake1900 yes there is but it is paid and locked to your vin. Look up Jscan

[@SuperBIGWINGS]

I just installed these headlights for my ram 1500 and getting parking light out would that be the what you should us how to fix I just ordered the obd and got alfaobd

[@MKSPerformanceOffroad]

Possible, try enabling/disabling the proper settings.

[@BAMaher]

Did this fix your issue?

[@robgirantino8843]

So is this what i would do. Cause my2017 ram 1500 i am getting low beam headlight out and parking light out on dashboard. My lowbeam light out only comes on when i turn highbeams on

[@MKSPerformanceOffroad]

Andre Locklayer, I had no light out messages on the dash or any warnings or even weird things like hyperflash happening. However, when I checked for faults I pulled 2 which were both for turn signals so you may have something set but not know it. Either way, if you put LED lights in you should set the HID to enable to disable pwm as it is not needed to vary the voltage to the bulbs.

[@offthecliff4121]

Hey how you doing bro? I have the same lights in my ram and for some reason the high beam (the big bottom one) for one of them wont come on. Any suggestions??

[@MKSPerformanceOffroad]

@@offthecliff4121 what bulbs are installed and are they connected properly?

[@david14fan]

This is also a option I had to change on mines for anyone who’s also doing this I had to change vehconfig 3: high intensity discharge headlamps without that option set to yes my passenger LED would still shut off without that being turned on

[@that11gmc36]

I have alpharex that I upgraded to Morimoto hid and like them a lot but my passenger blinker is out already. I have them in a 08 gmc though.

[@MKSPerformanceOffroad]

How old are the housings?

[@killaj4585]

Just installed the pro series. Went well. Threw a parking light out code after about 16 hours. Everything still works other than the daytime running lights on the passenger headlight. Please help.

[@MKSPerformanceOffroad]

Sorry to hear your having some trouble with these, do you have IG? If so please contact us there and we can see how to best help with your issue.

[@mr.anderson910]

Alpha obd did say the software for iOS devices has been in the work for some time via email but no release date anytime soon and no software for Macintosh anytime soon either unfortunately.

[@Fidel.17]

Connected the same headlights on a 2013 ram 1500 but the bottom drl doesn't turn on any suggestions??

[@MKSPerformanceOffroad]

Did you wire them to the correct power feed?

[@Fidel.17]

@@MKSPerformanceOffroad yes everything looks connected to the right power feed

[@MKSPerformanceOffroad]

@@Fidel.17 test to ensure you have ignition power going to the assembly and that the fuse tap is in a slot in your fuse box that is supplied power and not blank for spare fuses. Some trucks may not have the same fuse locations powered as others. If you verify power going to the light module and you have power getting to the back of the light but nothing happens, I would contact the company you bought them through or alpharex direct.

[@Rj-bl5sx]

What would you recommend I got custom 2009-18 DODGE RAM OEM PROJECTOR HEADLIGHTS WITH SWITCHBACK HALOS and my turn signal is flickering and my running lights aren’t working what do you recommend me doing

[@MKSPerformanceOffroad]

What are your light settings set to in the bcm?

[@jeansandmyshirt]

This doesn't work with headlight led bulbs over 50watts. I've tried it on 2012 ram.2018 2012 1500 You need a security cable to properly do it. My friend installed high low beam leds bulbs on his 2020 1500 tradesman stock headlight assembly. One side would shut off randomly He had to get the chrysler security bypass cable and use jscan. But jscan costs $30 per programming license. It worked perfectly thought.

[@MKSPerformanceOffroad]

Any year 18+ will need the bypass cable

[@landinharris9704]

I have the exact same setup with the same bulbs. Which bulbs did you use for hi/low beams?

[@MKSPerformanceOffroad]

I used the exact same bulbs in both locations

[@brooklynedwards8813]

I'm trying to search in comments and not seeing this. I have morimotos, will this work for those?

[@MKSPerformanceOffroad]

Yes it should be the same.

[@joe7528]

I currently have stock quad holengen reflective housing with supernova v4 LED's with the drive and module so far no faults in my 2014 Ram 1500 I'm considering upgrading to Alpharex like you have was wondering are the Low/High bulbs the same H7 ? I'm definitely going to get AlphaOBD MX+ and buy the full version app

[@MKSPerformanceOffroad]

Same H7 hikari bulbs were ordered and installed.

[@BEASTProjects]

Great video!! Definitely could have used this for my older 4th Gen Rams.

[@MKSPerformanceOffroad]

Thanks, working on them little at a time. This program is awesome and so capable.

[@charlesthompson7436]

Thanks, it explains the problems i was having with my 2014 ram 1500. I purchased a set of Vland led headlights, headlights worked but the turn signals and drl's were a no go. I received the turn signals were out message when they truck started and when i turned on the turn signals they hyperflashed on the mirror and in the rear bulbs. Also switching high and low beams messages were displayed. Hope this does the trick.

[@alexhdz2569]

Did this fixed your problem?? I also have Vland headlights and im having problems with the blue startup sequence…

[@charlesthompson7436]

@@alexhdz2569 no, asked for tech support and no response so i sent them back and just upgraded the bulbs with Auxito led's and have been quite satisfied, error free.

[@lukedevries9314]

Can you program it so the drl lights are the orange clearance lights instead of the white on a 2011?

[@MKSPerformanceOffroad]

You should be able to change the lights that are utilized for the running lights on most years, I cant say for certain if that is the case on your 2011.

[@lukedevries9314]

@@MKSPerformanceOffroad it worked for me with a little bit of thinking

[@MKSPerformanceOffroad]

@@lukedevries9314 awesome glad you got it figured out

[@jimbrohammer3456]

Have a 2015 Ram. How do you fix bulb(led) flicker using ALPHA OBD?

[@MKSPerformanceOffroad]

If you havent done so yet, you need to program the bcm to tell it that there are LED bulbs present. Some guys have had luck without enabling HID as well while others had to program LED bulbs and HID enabled.

[@Jimmybobcornflake]

I'm having issues. I've followed this and changed all the settings to LED and have confirmed after multiple cycles that they are yes. After doing so, I still get "low beam headlight out". I got morimoto headlamps. 2014 Ram

[@MKSPerformanceOffroad]

Did you enable HID?

[@Jimmybobcornflake]

@@MKSPerformanceOffroad which setting is that?

[@MKSPerformanceOffroad]

@@Jimmybobcornflake if you go into the same menu you were in, you should be able to type it into the search box and it will ask to enable hid headlights. This should turn off the pulse width modulation in the headlights.

[@FredFlintstone7]

Is the OBDLink MX a must or can I use a different obd reader with the alfaobd app? I already have a bluetooth OBD reader of different brand.

[@MKSPerformanceOffroad]

You dont have to but it is the recommended reader.

[@thirdgearboogie2210]

I'm a little confused on your explanation on the installation of LEDs for headlights. You explained that, even though you have the software to enable LEDs, it can still give you issues? I guess I don't get the point of buying this program if it doesn't enable you to have Flawless operation?

[@MKSPerformanceOffroad]

The Systems in these trucks can be funny at times. You can enable the LED options, enable HID options, disable halogen options and alot more things. The program in my opinion is worth the money if you plan to do more than just a couple things or just want a pretty decent diag tool. The type, brand, and design of the LED light can play a part in having a smooth operating LED light that is trouble free. Really just depends on the several factors but most should be easily configurable.

[@thirdgearboogie2210]

@@MKSPerformanceOffroad Thank you for the reply. Am I better off using a Android device or a laptop?

[@MKSPerformanceOffroad]

@@thirdgearboogie2210 for ease of use I like the android tablet but the laptop has been known to accomplish some tasks that the tablet has trouble doing for some reason. If you only want to use one device and dont mind lugging the laptop out to the truck then this is the route I’d go.

[@smoothpony05]

I have a morimoto XB led headlights..everything works but the blinkers flickers and other times don't work at all also message on dashboard says llturnsignal lights out..do i need obd to correct this?

[@MKSPerformanceOffroad]

Likely you do need to turn off halogen and enable Hid/led. This turns off the pulsewidth modulation for halogen bulbs.

[@smoothpony05]

Thank you.

[@rubedogg04]

@@smoothpony05 did it end up working for you?

[@dweder70]

does anyone know if this will work with 5th gen (2019 ram 2500)?

[@d.heisler9399]

I have the projector assembly with led turn and DRLs and the right side turn, drl and marker has gone out with hyper flash on the panel and I can't get the Alfa to correct it. Help?

[@MKSPerformanceOffroad]

If the lights went out as in they failed then alfaobd cannot correct that. You would need to replace the bad lights. Have you verified the lights are bad?

[@d.heisler9399]

@@MKSPerformanceOffroad Correction Alfaobd can correct them and did. The truck turned them off thinking its a short but what I did was add all outside LEDs and set to present so they all match and now my right side is back on and everything is working perfectly.

[@MKSPerformanceOffroad]

@@d.heisler9399 yes if the lights are good and not bad then Alfaobd will correct the issue. Can bus systems can shutoff lights if it senses a problem and thats why I asked if you verified the light was good not knowing how old or long they had been in use that way. Glad you got it straightened out though

[@terryreedy107]

Is there a way through Alpha ODB to enable Sequential blinker? Do the factory LED’s have that as a feature?

[@MKSPerformanceOffroad]

I couldnt tell you if the factory lights have the capability but if they did it would probably be in the bcm and you can search for lighting.

[@sytema]

Im going crazy trying to get my new bixenon headlight on my 2015 grand cherokee. Im getting the led flickering and no headlight at all

[@MKSPerformanceOffroad]

What are your settings for the headlights at the present time?

[@sytema]

@@MKSPerformanceOffroad in the enable bixenon and enable led

[@MKSPerformanceOffroad]

@@sytema are they enabled

[@travic2087]

Hey man just a quick question, I have a 2011 2500 that I am going to install the pro series on. Is AlfaOBD a must-have to run these headlights, or can I just run an anti-flicker module on it?

[@MKSPerformanceOffroad]

It certainly makes it easier but there are many different ways you can correct hyperflash if you get it. Also will depend on how much you can program with a 2011. Guys have run the modules, resistors, and used alfaobd.

[@travic2087]

@@MKSPerformanceOffroad Cool thanks a lot!

[@colestreit1500]

I've heard that LED bulbs aren't the greatest with Projector headlights. Right now I am on the fence about which bulb I should go with. LED or HID. I love the fact that LED is instant especially with high beam and that there is not all the wiring that comes with HID. what do you suggest?

[@MKSPerformanceOffroad]

I like the LEDs and honestly they have pretty good light output. I went with the LEDs all around because HIDs have a warmup time and are not good for high beam use. You could do HID lows and LED highs but I havent tried the HID mainly for the reason stated and extra wiring. Best light output would be with a true LED light from aloharex

[@colestreit1500]

@@MKSPerformanceOffroad I have everything hooked up correctly, fuse tap in F66 but my DRLs will not stay on. Any suggestions? The lights will turn on when lights or parking lights are on but not when everything turns off

[@anthonyb8405]

can you check and see if the "one touch lane change" can be adjusted to go beyond 3 blinks? and also for "DRL lamp location"...what options does it show?

[@MKSPerformanceOffroad]

I only see for 2013-17 where you can enable the lane change but not adjust it. As far DRL Im showing high beam, low beam, turn signal, fog lamp, dedicated, and srt light bar.

[@anthonyb8405]

@@MKSPerformanceOffroad is there an option to enable the side mirrors to tilt down when shifting into reverse?

[@javiersuarez2011]

Hey buddy cuestión, I have a 2012 ram 1500 and. Have LED on it , also have hyper flashes when I use my turn signal , but the AlfaOBD don’t show me the settings for correct that ussue whe I select the year of the truck , it only shows me the HID option, will preciatte ur help thanks 🙏!!!!

[@MKSPerformanceOffroad]

Alot of times what causes the hyper flash is the pwm (pulse width modulation) when halogens are installed so guys turn hid on to disable this. If the turn signal option for LED is not there and you dont have hid headlights or LED headlights this may not help you

[@javiersuarez2011]

Well yeah I do have LED headlights but according to the year off my truck (2012) alfaOBD don’t show me the LED option , but if I select 2013 it does , but we I hit the yes for led , it says tha the system don’t support this option, Any clue of how can I fix this, thanks for answering me 👍!!

[@MKSPerformanceOffroad]

@@javiersuarez2011 if it doesnt show you led option for 2012 its likely due to it not being supported by the bcm, you may have to wire in resistors or there may be a possibility to replace the bcm with a newer one from 2013+

[@javiersuarez2011]

@@MKSPerformanceOffroad oh ok thanks for the info my friend preciatte

[@MKSPerformanceOffroad]

@@javiersuarez2011 anytime, you might check the forums, I think some guys may have experience with this

[@bryancalixto35]

What leds did you use for the low beams ? And how do you like them?

[@MKSPerformanceOffroad]

H7 bulbs from Hikari, Im happy with them but some people have mixed reviews. I plan to try some Lasfit led bulbs soon.

[@caboose9446]

Do you have any additional front lighting? I found your video which was helpful on doing stuff on the Alfa. I have bullseye custom auto grill lights and AlphaRex headlights. Anytime my headlights are on i get a short circuit fault left and right no location though. Only when headlight are on. Works fine with parking lights. Any thoughts?

[@MKSPerformanceOffroad]

How are the extra lights wired into the truck?

[@caboose9446]

@@MKSPerformanceOffroad well tried a couple ways, first tapped into the same drl wire as the AlphaRex. Fault when headlights on. Then a separate tap. Fault when headlights on again. Grill lights have power wire on fuse tap, one wire to each turn signal, ground. Now I’m stuck. Don’t know what else to do

[@MKSPerformanceOffroad]

@@caboose9446 what is the function of the lights and where are they installed?

[@caboose9446]

@@MKSPerformanceOffroad mounted into the grill. Drl on all times truck is on, sequential turns.

[@caboose9446]

@@MKSPerformanceOffroad also after watching your video made everything led and hid is enabled.

[@HemsoonFog]

What main led lights do you have what's the size for a 2016 ram 1500, hope you can help me out :)

[@MKSPerformanceOffroad]

Are you wanting low beams? Are you replacing in alpharex lights?

[@HemsoonFog]

@@MKSPerformanceOffroad yes I'm getting alpha Rex lights but don't know what's a good brand or size that fits into them for the low beam thanks man!

[@MKSPerformanceOffroad]

@@HemsoonFog mine were h7 on both low and high beam.

[@HemsoonFog]

@@MKSPerformanceOffroad thanks so much I ordered the wrong ones lol but thanks so much!!

[@BT-xv2lr]

How are the LEDs and the housing assemblies going so far?

[@MKSPerformanceOffroad]

Great, I haven’t had any issues so far. These are the lower end headlight so I didnt expect as good of results like the totally LED light from alpharex. Some people have mixed reviews but in my case they are still better than stock.

[@BT-xv2lr]

@@MKSPerformanceOffroad Great to hear that. I'm going with the same setup. My alpha's are in already , just waiting on my hakari titanova's to come in. Thanks for taking the time to reply !

[@davidnarciso]

If I turn on drls for this. Will I still have to connect that little red wire

[@MKSPerformanceOffroad]

You will not have drls unless you physically turn them on without wiring drl harness. www.alpharexusa.com/how-to-wire-the-drl-harness/

[@davidnarciso]

@@MKSPerformanceOffroad ok. Forgive me. So your saying I will still have to wire it? I used alphaobd today and turned on my turn signal lights as drls. I don't have the headlights yet but I wanted to do this first. If I still need to wire than I will. Thanks again

[@MKSPerformanceOffroad]

@@davidnarciso correct, with the alpharex lights simply programming them doesnt mean they will be on. The functiin of the drl harness allows them to be on without you touching the switch in day time and the intensity is brighter during daylight and adjusts down for lower light conditions.

[@gastonemondaguilar5599]

Did you use a security module bypass?

[@MKSPerformanceOffroad]

Yes, it is needed to change any parameters on 2018+ trucks

[@rustyestle7728]

Do you still use the led lights or did u switch to hid? Also if u are still using the Hikari led which ones are u using and which one is the low beam and which one is the highbeam?

[@MKSPerformanceOffroad]

Yes Im still using the Led bulbs. Low and high beam are the same bulb and the link for the ones I got are in the description.

[@MKSPerformanceOffroad]

Use the first link for hikari bulbs, those are what Im using. The second link is for the ultra bulbs which are supposedly the new bulbs they have to better mimic a halogen light source.

[@rustyestle7728]

@@MKSPerformanceOffroad are you going to be putting out a how to aim the headlights and the bulbs?

[@MKSPerformanceOffroad]

@@rustyestle7728 I do plan to put together a video specifically for these headlights and the 4th gen trucks, hopefully in the next couple weeks. I wish it were faster but there is a lot of stuff going on. In the mean time, video that is linked in the video will get you buy with aiming.

[@rustyestle7728]

@@MKSPerformanceOffroad thank you so much for your help! Also I hope everything is going ok! I wish you a fresh new year

[@saddawgy]

Did you use a retainer clip for the led bulbs? I can find them anywhere for the ram. Or is the Alpha rex already equipped for after market LED lights?

[@MKSPerformanceOffroad]

I was able to use the retainer clip in the alpharex headlight. It was tight though

[@saddawgy]

@@MKSPerformanceOffroad Thank you! That's all I needed to know. Now I just have to wait for the G2s to restock. 😂🤣

[@colestreit1500]

I ordered those led lights you suggested, they are definitely not bright. Very soft and dim. Is that because they are projectors? Or is it the bulb

[@MKSPerformanceOffroad]

Might be a combination of the projector and light. Mine are pretty bright and have good illumination but I cant speak for the consistency of them. HID in the low beam would mimic a halogen light source better but you would need all the extra wiring which I didnt want or you would need to buy a more expensive bulb that is of better quality. I bought these for the cost and thought they performed well compared to the halogen bulb.

[@colestreit1500]

@@MKSPerformanceOffroad what about the DRL? I have mine all connected the right way and they do not work. Connected to the battery, into F66 fuse tap.... any suggestions?

[@MKSPerformanceOffroad]

@@colestreit1500 I would contact alpharex and start trouble shooting that little wire harness. The harness from the lights is essentially a switch and can fail. Use a multimeter and check to see that you have everything needed supplied to that harness i.e. power and ground and if there still is a problem its likely an internal issue

[@satxification]

How far is the truck from the wall when you align the low/high beams ?

[@MKSPerformanceOffroad]

About 25ft. Slight adjustments may be needed after driving

[@grenebulax]

But how do you adjust them without taking them out?

[@olehyanchyshyn5133]

Which hikari LED you put on low beam? I want do same as you

[@olehyanchyshyn5133]

Also i did programming all the LED to YES (low beam, turn signals) and the turn signal starts working with no problem now, but the low beam which staying Hikari Ultra fokus h7 stop working after 20 sec, and show me 4 codes on a tablet.. do i need to program something else or i need swap bulbs to Hikari vision plus?

[@olehyanchyshyn5133]

Got solutions, for dodge also need say YES to VehConfig 3: High Intensity Discharge Headlamps- YES Now is everything works, thanks for your video 👍

[@olehyanchyshyn5133]

Got solutions, for dodge also need say YES to VehConfig 3: High Intensity Discharge Headlamps- YES Now is everything works, thanks for your video 👍

[@mattpoe1974]

How did you orientate the bulbs in the housing ?

[@MKSPerformanceOffroad]

Leds should be at 3 and 9 position

[@mattpoe1974]

@@MKSPerformanceOffroad So the bulb should point side to side not up and down?

[@MKSPerformanceOffroad]

Correct side to side

[@badcummins59]

Good video. Will have to get it for my hids. Question about my uconnect. Did update to navigation lost my 3rd brake camera and my backup camera on my radio! Uconnect said they know issue but can't do anything. What do you suggest?

[@MKSPerformanceOffroad]

I would suggest going in with alfaobd and seeing if it is enabled and if not try to enable it to see if that fixes your problem