N62 & N62TU Valve Stem Seal Tool Kit

[@rayrodriguez8886]

Just finished my 3rd N62 engine,, it has become a more easy job every time, i have seen this job done the conventional way in other shops, and boy this is so much better!!!! I would just add two things that work so much better for me: 1: work with rope ínstead of compressed air, 2: remove camshaft sensors before takin out valve covers, a little tricky but better and easier for the valve covers goin in and out.

[@i990749]

Ray Rodriguez what do mean by “ using rope”?

[@rayrodriguez8886]

P.I. M. With compressed air there are many things that can go wrong, so just before reaching the top dead center I introduce rope to fill the cylinder and then gently compress from the crankshaft, and to lower the valves you only go back a little from the crankshaft, of course to take out the rock arms

[@destroyer6867]

@@rayrodriguez8886 you are a very smart man! Thank you

[@RONNIEBULLOCK]

I am glad this is available now I have been waiting for 4 months to get this because I need to fix my car

[@truckatadders]

That is a very ingenious, well produced kit. Some of the principles involved reminded me of the old factory issue ladder style valve compressor used when the 6cyl M30 engine.

[@bearded1derr]

Very in depth and informative instructional video, absolutely brilliant. Thanks for the effort of making and posting.

[@jeffgilmore695]

excellent tool .have an 2006 750 ,4.8 liter that needs valve stem seals im getting this kit thank you.this is why i like working on German cars.my boss is going to be happy..no need to remove cams .dealer quoted almost 10 k for this job.

[@TRUCK-PERFORMANCE]

I have not gotten one bmw that will give me a headache this tool has saved me time an money its worth it if your a mechanic if you dont know what your doing call someone that can doit cost to do this job at bmw its about 6 t8 thousand nice tool to have thank u guys

[@meatintaco2002]

Everyone at AGA is very helpful. They have a CS number where you can ask them or Rich anything to guide you through the process. This job is not for the of . Personally, I had dropped keepers, searched, crawled inside, and on top of the engine, trying to see. One thing I've found that is extremely useful is prep the area with small cloth/paper towels that can catch anything you drop. An endoscope camera is extremely helpful along with small lights to help keep your work area well lit.

[@kdao1007]

probably doesnt hurt to have a lot of magnet rails in case it falls. I mean 32 times repeat anything can happen w fatigue of hands. LOL

[@donnythomas0078]

I used this kit to great success on my 2010 550i!!! GREAT KIT!!! Worth every penny..

[@AGATools]

That's awesome Donny!

[@ShoshinMizu]

Omg thank you for existing. I'm so mad it took me 6 years to find!!!!!

[@mikimiki195]

Valve keeper tool was amazing when I did my N63 valve seals 👍🏻

[@kdao1007]

Wow, Very Impressive and Detail instructions. Great tool design as usual.

[@AGATools]

Thank you very much!

[@007Vision]

Thank you so much for the phone call to clarify the information,I re-edit the question so others can see the correct info/reference. I really appreciate your friendly help.

[@felipevalles8041]

Great video,I used a rope inside the cylinder instead of air to keep the valve closed...

[@jpcallan97225]

An ambiguity with the Keeper Installation Tool exists at about 15:25 into the video. It says to "...remember to have the fat side of the keeper facing up" while the presenter is holding the tool upside down to load it. This is confusing and could mislead a newbie. The keepers must be inserted into the tool with the fat side down, narrow side up so when they are installed on the valve the fat side is up.

[@LynxStarAuto]

I apologize. Not to be condescending, but his explanation is spot on.

[@brandoncibiel2864]

Thats just a awesome worktool. Ive always done it with building the cylinderhead off. Good work man

[@MrJoe750li]

You my friend are. Beyond a life saver !!!

[@mopauly]

On the waiting list for the tool!

[@mopauly]

I did - I think I was one of the first customers to order. Tool is fantastic, worked perfectly.

[@carlosrojas-hk8xs]

Did you buy or rented

[@alfredbosire4326]

These are fantastic tools.

[@GermanAutoworksmn]

Very helpful. Ordered tool right after watching video. Thanks

[@MRJZA75_34]

thank you for making this video

[@bmwtech1044]

great tool, good video instruction. i have used this tool and removing the intake is a must on e 60 545i. i was not able to access torsion springs on cyl 4 &8 on the intake side due to the valvetronic set up. after intake removal i was able to use tools .

[@apokobondoni]

Wow, didn't even have to remove the camshaft or timing chain like what I see in other videos

[@sbchug2484]

Fantastic video!! Thank you!!

[@mathewfleming]

This is GENIUS!!!

[@antonshcheglov7611]

Great video, very explicit and helpful!

[@jdub8]

Awesome video and great explanations. Thank you.

[@canoperu]

Setting up to do this work. Questions about the air: where does it actually enters the engine and how much pressure? Hose fitting thread size? Thanks for the help !!

[@AGATools]

The leakdown tester gets installed into the spark plug hole. 20-30psi is sufficient for the job.

[@alb12345672]

Pre 96 Ford 4.6L V8s had this EXACT problem. Hard valve seals, smoke, after 100K miles. Amazing how BMW let this happen. I have a chance to get a cheap 7 series with this problem. Smokes like a chimney. Dealer wants like 5K to do it. I thought I was looking at a Ford V8 DOHC engine, down to the beehive spring. The procedure is identical. Ez valve cover removal(crown vics need the evaporator and brake booster out). That compressor tool is awesome. The Ford has 2 primitive tools for intake and exhaust, and you have to use a breaker bar as a lever against the cam and spring while you fish out the keepers(not fun). I bet your tool would work for Ford too, definitely a market for that. Do you sell that part alone? I also use thick rope in the cyl head and bring it up to TDC. Had a bad experience once with air. Also, are the guides usually trashed? That was a not-so common issue with the early Ford SOHC engine. I also like the rope method because you can feel if the valve has play.

[@LynxStarAuto]

Crown Vics DO NOT need removal of booster or hvac box. Also the valvetronic system makes the intake valves more laborious than on the Ford modular V8. Not to mention most Ford applications have half the number of valves. All BMW N series 8's have 32 valves with crappy seals.

[@spunbearing]

the purpose of this tool kit is to be able to do it with the engine in the car. I would have preferred to see it done like that cause this doesn't really show the difficulties associated with that. it was still an informative video though, thanks.

[@AGATools]

We did do a video of the engine inside the car, but the number one complaint was viewers couldn't see certain angles. We had to recreate the video such as this so folks can see the procedure.

[@bokscortez6270]

Great Video! Thanks for sharing!

[@georgegermain3461]

Nice job on the video! First Class!!!!

[@billriffert7286]

You mention replacing the lifters "if they are bad". Given that there are 32 of them and they cost $25~/lifter how do I tell if any particular one is bad? I have a 745i with about 105k miles on it and it occasionally smokes and regularly throws P0492 even after using your Secondary Air Cleaning tool - no complaints on the SAC tool as it worked great but the valve stem seals are still forcing the code (which is always P0492).

[@6ggtov72]

Bill Riffert The P0492 DTC is not related to the valve guide seals. it is a conditional code for sec air flow to bank 2. The plastic air pipe sometimes cracks and on occasion I see that the fittings detach from the air valves at the back of the heads. If you're positive that the sec air piping is in tact, then more than likely you have clogged ports. The chemical and brush kits you see on the internet will work *sometimes* The permanent fix to this problem (if clogged ports is your problem) is to manually clean them. So either remove the heads individually or remove the engine assembly. the latter is easier and should be cheaper. if the heads are removed, then the exhaust valves need to also be removed. I don't suggest this route as its tremendous work. good luck wherever you may go.

[@kevinreis1002]

Frank Lopez would that cause smoking

[@christopherblackburn7054]

great video AGA could this procedure be applied to the N42/N46 engine having the valvetronic variable lift cam unit in place or would this unit have to be removed to gain access to replace valve seals.

[@strikeryachts]

These guys are the best !

[@1flybyguy]

I have a 2010 550i and about 6 months ago I started having intermittent smoke happen only if idling for a while. It's been eating up a lot of oil over the last year as well. I just had a BMW dealership estimate the cost of valve guide seals repairs and I was quoted $14,248.24. WTF?!!! That's 40 hrs of labor and $5100 in parts. The repairs are more than what my BMW is worth.

[@JohnThomas-yf3gw]

You can get it done for $2500 !! Never take your Bmw to the stealership after warranty has expired!

[@1flybyguy]

@@JohnThomas-yf3gw I'd definitely get it repaired for $2500, but I wouldn't know who to ask much less trust that they could do the job without ripping me off. I was told it wasn't going to cause any major secondary problems if I didn't get it done and I'll probably just hold off until I can find the right mechanic.

[@JohnThomas-yf3gw]

1flybyguy where do you live? I got a 07 650 that’s doing the same thing. I’m in Atlanta and there’s plenty of shops that will do it for 2500 maybe a little less

[@1flybyguy]

@@JohnThomas-yf3gw I live in the San Francisco Bay Area.

[@JohnThomas-yf3gw]

1flybyguy damn if you were closer but the Bay Area wow.

[@brayanjacquez3021]

After installing the valve stem seal, along with the keepers, why is the air pressure relieved if you are going to compress it again to install the rockers? What is holding the valve up? Just the valve stem seal? Hope that makes sense lol. Just a bit confused.

[@AGATools]

Yes, the seal has enough tension to keep the valve up. If you don't relieve the air, you can't compress the valve and spring to install the rocker arm.

[@ribhi7491]

Thank you! I have to replace the valve cover gaskets on my 550i, is there a way to tell if my stem seals are good by visual inspection? (of course without having to remove them). I figured sense I will be removing the cover, I might check if this job will be needed.

[@CasualTinker]

No you are good, if they are bad you will get smoke all the time and also codes and it also becomes really bad after sometime. Stop thinking about it.

[@brucedag4587]

+Ribhi Kamal Get your engine really nice and hot by driving the car for about a half hour, then park it and let it idle for about 15 minutes without touching the gas pedal at all. Now go in the car and give it a quick wide open throttle for a split second. If you have a bunch of smoke coming out with that burned oil smell out your tail pipe you know you have this problem. This is a good way of telling before it becomes so bad that it's always smoking.

[@ribhi7491]

Thanks Bruce, that actually worked. By worked, I mean that I actually had the problem. I let it idle for a few minutes with the crank case ventilations closed and then I floored.

[@tayvonebarnes7043]

do u have any video for 1999 CLK430 Valve Stem Seal Tool Kit what type of things would you recommend on an engine that has 216000 that's smoke a little bit in when i started up in the morning

[@007Vision]

Hi, I Purchase the 2 KITs , But I have one final question that i did not find on the kit. What is the TORQUE SPECs to re-tight the bolts on the CAM TOWER ,Since its has been removed and the VALVE COVER LID so it don't crack. or damage, You guys should make one very thin long plyers , I had much problem removing the old seal being stuck. very hard on X5 I really appreciate if you give the toque pressure for me to finish the job. Thank you

[@007Vision]

+All German Auto ,I dont have one, the 14 nm its for the Plastic valve cover or the cam tower brackets ?

[@cincomorales]

+All German Auto I purchase the tool but the part that holds the rachet was defective! Can I exchanged it? I can email you photos of what im talking about!

[@cincomorales]

+007Vision its call the rotation hand tool !

[@cincomorales]

+All German Auto i will thanks for your support!

[@rayrodriguez8886]

Hey AGA guys, i just bought this kit to do valve stem seals in my X5 ´06, but neither in this video or the instructions that came with the kit it says how many psi of air pressure into the cylinders, would you be so kind to reply?

[@AGATools]

Ray Rodriguez 20-30psi is enough to hold the valve up.

[@rayrodriguez8886]

TKS !!

[@terryleong8462]

do u have any video for N62 timing chain installation ??

[@UltimateBimmerSVC]

What about checking the valve guide clearance?? BMW has released videos in the past for the N62 and checking the clearance. We have seen several N62 with worn guides, if your guides are worn you will be in for a nasty surprise down the road when the valve seal starts leaking again. A short cut like this is a true life saver, but it is somewhat risky. Could save the day if the guides are in good condition though.

[@AGATools]

Brent, after extensive R&D and doing many N62 valve stem seal (We did 142 valve stem seal jobs in 2016), the guides are usually never worn. Our highly experienced tech do test to see if the guides are bad, but out of the 100 cars we have done, only 1 needed guides.

[@jpcallan97225]

I was under the impression the valve guides in the E62 are not replaceable. The online BMW factory shop service manual I found (European version) showed replacing the valves when the stem to guide clearances gets sloppy, suggesting strongly the the stems wear but not the guides themselves. What is the reality here?

[@rollydoucet8909]

It seems every BMW engine requires its own specialty tools to service the engine. I have purchased tool kits for the Bimmers I've worked on, and they aren't cheap. Other shops know I have these tools and ask to borrow them. I won't lend the tool kits but I do rent them.

[@TangDynasty1983]

Are the quality of the new seals better than the original ones? Thanks.

[@AGATools]

Apache, we recommend using and aftermarket company called El Ring. They make their seals out of a viton material which is far more superior than the OEM ones.

[@petermirle2840]

Had my bmw X5 5.0I in the shop this week has 93 miles on it is a 2013 drinks 1.0l oil of 450 miles they told me my valve steam seals are bad took them 4 days to do it gave me a brand new 2019 loaner and BMW of North America paid for it all was covered under the class action suit for oil consumption

[@petermirle2840]

93000 miles

[@petermirle2840]

Sisto Montoya Jr. make sure your car is registered with bmw of North America then go to your dealer and complain of oil consumption the can contact bmw and everything else is up to them good luck

[@TheFreeg8407]

Hello, Is there any other option how to do this job. It`s a bit expensive to buy tool for a single user. Any option like to rent ?

[@AGATools]

TheFreeg8407, The only other way is to remove the engine, remove the cams and then remove the cylinder head to do this job. We do not offer renting of the tools. If you have any questions, please contact us directly at 760-738-4084.

[@dank5372]

Hi guys My BMW 735i has 5 misfiring cylinders.. Could you advice me what to do please. I have a friend who is mechanic and would be able to sort it out but I'd like to know what you think and if you have any experience with it. Thank you

[@AGATools]

Please contact our service department at 760-738-4626, so that we may advise you best on what to do.

[@mephistothegreat]

I've done this on an N62 in BMW E70 with this tool kit and I can tell you this is a hell of a work. It took me 30 hours net and my hands were oily and bloody like shit. I will never do this without removing the engine out of the car again. I bet I would've been faster if I had done this first.

[@LynxStarAuto]

I have done 6 with the engine in the car. Done it in 2 days work. Perhaps you need a better approach?

[@Mirro3m]

@@LynxStarAuto I bet if it was e70

[@DameAndThatGame]

old video i know, its great by the way, can you confirm this works with the n42/n45/n46 316 318 320i engines?

[@DameAndThatGame]

***** thank you :) do you know if i am able to replace the seals on the engines i have said without the removal of the head?

[@aleben4813]

+DAT G - DameAndThatGame It is possible. My mechanic changed the valve stem seals on my 320i E90 without the removal of the head.

[@DameAndThatGame]

Ale Ben hey, yeah I found a process now, thanks for the reply :)

[@rikiru1139]

Hello! What is the preasure you put into the cylinder to avoid the valve to fall down into the cylinder, can't really tell in the video what preasure you used. I have bought a N62 valve repair kit. Thank you!

[@jonathanvazquez2895]

+All German Auto using 80 psi 5 psi loss valve still fell

[@jonathanvazquez2895]

Vladimir Yemelyanov don't give up, after tweaking it worked out. Car works perfectly firm now

[@orlanmedina3693]

Seems like a hell of work, but i do belive if this problem has been going on forvtoo long, it would be better to do it the old fashion way to clean up the valves an seats

[@davidhaight5147]

Have a kit for the M52 engine

[@udoglickenklaus2936]

Can this job be done while the engine is in place? Do you ship overseas to Germany?

[@AGATools]

Udo, yes you can and yes we do. Please contact us directly by phone or email Rich at [e-mail]

[@mikekhazma7698]

how much this kind a job cost in labor with engine on the car approximatly?

[@josephrollins5689]

I need some one in Houston TX that can complete a valve stem job on my BMW 645.

[@6ggtov72]

There's a few Euro shops in the area.

[@cliffordoluoch3277]

I own an indy shop in Clear Lake area of Houston and we do this job for $1500, Tel-713-834-2192

[@gruponemesis]

will see you soon clifford!

[@danielpacurar2644]

With the tool kit, what is the approximate labor time on an X5? Thank you.

[@AGATools]

Dan, with the tool for an X5, you are looking at 21.5 hours.

[@Mrofficer2u]

question does the engine have to be out of the vehicle to use this item ?

[@TheFreeg8407]

I`m confused. I have issue with my car and cannot figured out if it`s bad head gasket or valve stems? My symptoms are white smoke in idle for like -2-3 mins. Usualy white smoke should be head gasket.

[@AGATools]

TheFreeg8407, That is incorrect. White smoke blowing out of the exhaust is a tell tale sign of bad valve stem seals. The stem seals are deteriorating, causing oil to get into the combustion chamber, causing white smoke. If you have any questions please feel free to call Rich at 760-738-4084. You may also email us at [e-mail]

[@AGATools]

@Sisto Montoya Jr. , no it won't. Sounds like you have bad valve stem seals. Letting the car idle and then revving it is a way to test for bad valve stem seals. If you get white smoke, that's bad valve stem seals.

[@andrewvallner6926]

@@AGATools assuming one doesn't drive in traffic jams so avoids the problem, how long to get from smoke after long idle to smoke all the time and error codes?

[@kayzrx8]

Great video thanks

[@rizkybiss]

Very cool. Im not to far from escondido. How much to do valve seals on 2008 bmw 750li?

[@AGATools]

Hey, give our service department a call and ask for Troy, he will give you a better idea of the cost to do this job. His number is 760-738-4626.

[@hailedemmanuel95]

good job for advanced me

[@kingquadrules2115]

Is it a must to replace the spark plug tubes for this job, or can i re-use my old ones?, also, what can i use other than drei bond 1209?

[@kr0nus477]

Having an issue with the intake rocker followers. The spring that holds them pop out of place with the smallest touch (like putting the rocker back into place after replacing the seal). Any tips on how to prevent this? It is a pain getting them back into place.

[@AGATools]

Kr0nus, can you please give me a call when you get a chance? I don't quite understand what you are asking. You can reach me at 760-738-4084.

[@shahs4935]

can i use this kit for 2006 650i?

[@jwils9679]

do you have someone in the bay area that you partner with here that can do this job.

[@AGATools]

J Wils, Unfortunately, we do not have anyone in the bay area. We would be happy to complete this job for you. We can provide a rental car for you while we perform the service. Please give us a call at 760-738-4626 to speak with a service advisor for more details.

[@progressnotperfection81]

Fix Fitness LLC how much on average is this. I need it

[@AGATools]

Unfortunately, we do not have anyone in that area. You can purchase the tool or have the shop you are working with purchase it to work on your vehicle. Please see the following link. www.agatools.com/tool/n62-valve-stem-seal-tool/collection If you have any questions you may call us at 760-738-4084 and ask for Richard.

[@GenX...MCMLXV]

@AGATools You may want to let your host know that a "Beamer" only has 2 wheels --- while a Bimmer has 4

[@guyanesegamer1693]

Will this kit work on the n73 bmw 760li

[@INDYTECHbmwMASTER]

Can this tool be used on the mini N12/N14/N18 engines in any way?

[@AGATools]

Hi, so though this kit isn't made for those engines. However, we have MINI dealerships using this kit for those engines. You have to modify some cam brackets and the compression screw with the foots. We personally don't know the exact details but it can be done.

[@MFilmz1]

are you gonna upload a video of baja 1000? Please

[@robertbiegun8427]

what is the torque for Cam cap nuts

[@AGATools]

10nm

[@leveldvibes13]

Hi Guys! Would this procedure work on a N63 engine (2013 BMW X5) ?

[@AGATools]

Levar, not this kit but we have another kit. It can be found here: kzbin.info/www/bejne/nJiWnJp4jMZ6oc0

[@Bmw-kf2qr]

This kit is expensive to rent and a pain in the ass to use. You only need a long socket that fits the width of the spring. In the inside of the socket you glue a strong magnet that won't be in the way and hit the valvepin once you hammer easily on the socket. The magnet inside of it will catch the lockers so it has to be strong enough to suck the lockers so that they don't fall into the engine. After you change the seal you take the spring and compress it and put a stripe on each side while spring being in a compressed state. Don't stripe it all the way to the bottom because then then it won't lay flat on the seal. When you have the spring and the lockers in place you just cut the stripes and remove them out of the way and you are done 👍

[@cyclinglover3721]

how much u guys charge to do the job?

[@gassan16]

How many PSI of air should you put in the cylinder?

[@gassan16]

***** Just so you know, 60-70 psi did the trick for me. 90psi turns the crank. Its also worth to mention that removing all plugs is not recommended since the risk of turning the crank increases. Thank you for the tool. It was very useful.

[@thexlmandingo]

I need someone near Lakeland Florida to do this procedure on my 750i.

[@76Bourne]

does this work on m54 engines as well?

[@AGATools]

No it does not, only on the N62 engines

[@supermrmotorhead7239]

Why didn't they install the correct seals from the factory.

[@maxheadroom1506]

they want to sell you a new engine for another $10K

[@donaldbarron7916]

Nice 👌

[@Burning2nd]

Damn good video.. I dont have the problem.. but damn good video

[@TheMiloking]

Wish this worked on N12 and N14....

[@AGATools]

Though it's not a direct fit, people have used this on N12 and N14. Word is, there's a video on KZbin showing this but I haven't been able to find it.

[@TheMiloking]

@@AGATools i found someone using it on N12 head, at least on exhaust side. Not sure how it will work with the valvetronic intake side

[@juanalejandre8694]

What is the Price for the n63

[@AMG28ful]

5 bucks

[@wireashly]

THEY DONT HAVE THIS TOO FOR SALE NO MORE ON THEIR WEBSITE

[@AGATools]

wireash, it is still on our website here: www.agatools.com/tool/n62-valve-stem-seal-tool/collection

[@ramone9853]

where can i get the n62 kit to buy for my shop

[@alfajam]

+All German Auto Hi, Wondering whether you have an equivalent tool for the M62. I like the idea that the cams don't require to be moved, so re-timing, etc., is not required. Brilliant.

[@alfajam]

Great pity, as the scale would make it viable, I am sure. Thanks for your response.

[@babyboy-gh7gb]

Aga tools do you have a shop im in the escondido area

[@AGATools]

Yes we do! We are located at: 1327 Simpson Way Escondido, CA 92029 We are the building in the back. Stop by and check out our facility!

[@DjDestinyChicago]

Amazing video! I’d actually like to buy one of these with bad seals 👍

[@kevinreis1002]

My car smokes then stops what could that be 2006 750 li

[@AGATools]

Kevin, sounds like you are at the early stages of bad valve stem seals. This issue will get progressively worse and worse as time goes on. You can find out more about our tool on how to replace valve stem seals here: www.agatools.com/tool/n62-valve-stem-seal-tool/collection If you have any questions, please give me a call at 760-738-4084 or email me at [e-mail] - Richard

[@Schnippen_Schnappen1]

Can i use this on a e70 X5M ?

[@AGATools]

No, you would need our N63 Valve Stem Seal Tool Kit: kzbin.info/www/bejne/nJiWnJp4jMZ6oc0

[@mjshuja1948]

I HAD SAME PROBLEM IN 545i and 745l I FIXED BOTH THEM IN 5$$$$$$$$

[@NHassi]

Hello 👋 there to USA! Dear Martin, can You please tell or write to me, who have buy / order this Tool-Set for Valve Seal for N62B48 Engine Modell E70 by You, because I have also this Problem with my Car 🤯😤🤮🥶🤦‍♂️ I am living in Germany ZiP-Code 76530 in South-Germany. Can You please write witch Car Workshop have order that Tool by You ??? Thanx a lot Best Regards Nicco

[@ak540i2]

This is what I hate about BMW. Why are they plagued with these kind of issues? Can't BMW engineer something with a little bit of foresight?

[@AGATools]

Every manufactures have their fault. If every car was perfect, we mechanics will be out of jobs!

[@LynxStarAuto]

Somebody has to pay my mortgage friend! 😆

[@maxheadroom1506]

@@AGATools bmw it seems designed their latest cars so that when it is time for an oil change you change the engine as well. plastic guides for the timing chain inside a hot engine really brilliant.....

[@94meriks]

I'd like to se anyone do this with engine in the car! I can see the pain in my back soo bad :) Beside that, very good instruction video!

[@carljames7562]

94meriks I did it no problem and it was 1st time fixing a car also

[@radianm6]

Carl James lol i need help

[@stripemaster9]

Time to reduce the crazy price, utmall makes a kit for $125

[@sajeshag]

Available in uae

[@seroteis666]

dam, I bet you can replace the valve stem seals with your eyes closed.

[@carlosgordon1674]

With the engine in the car is faking hard to do it the intake valve spring in back of head is pain in the back, this guy should make a video with the engine in the car

[@AGATools]

Carlos, with the engine inside the vehicle, the cameraman won't be able to get certain angles of the engine to show you what is needed to see and do.

[@meatintaco2002]

I hate those keepers they are the most frustrating part of doing this job. If you can remove the engine its well worth it time + frustration. Almost done with Bank 1 intake is absolutely a nightmare especially when it comes to trying to snag the keepers back on lol

[@AGATools]

Art, have you used our valve keeper tool? If you haven't, you are missing out!

[@meatintaco2002]

yup .. just haven't mastered this tool yet .. I guess there are a lot of tricky parts to get into. I'm worried now that I'm finished with bank one that my valve dropped into the cylinder "intake" was able to retrieve it and install properly but now I'm having issues with the valve properly seating .. lost about 10% when putting air into the cylinder. Should i go on ?

[@AGATools]

Art, the keeper tool does get a bit tricky, but once you know how to put the keepers in, it's a walk in the park after that. With the valve not sealing, was this on intake or exhaust side? Because if it is the intake side, these engines are known to have issues with the valve sealing on the intake side once the rocker arms go back on. What we like to do is finish the intake valve seals and install the rocker arms all at the end.

[@meatintaco2002]

This happened on the left bank / bank 1on intake cylinder 4

[@kr0nus477]

Having an issue with the intake rocker followers. They seem to pop off the spring with the smallest touch and getting the spring back into place is a serious pain.....any suggestions?

[@bavariancarmpower382]

Mechanic Kevin Costner

[@jmj5150]

it's the little things that over engineered German engines always mess up on

[@skillz1855]

Boy Bmw sure screwed up their V8 engines after the E39 N62..these cars are literally worthless.. Brilliant tool and demonstration though

[@maxheadroom1506]

you lease these cars for 3 years and give them back

[@andrewvallner6926]

@@maxheadroom1506 the fact that they become nearly worthless in a few years is captured in your lease cost

[@chillinwtheenemy]

You lost me at 32 valve stems