Мое уважение. Это первое видео о пакистанской мастерской в которой есть стол и детали не бросают на пол.
@trucphuong52752 жыл бұрын
Yeah . You right 😁👍
@ТимурСадретдинов-д8ж2 жыл бұрын
Ты просто не видел куда он бросил уплотняющую резинку)
@ViktorsMalgovskis2 жыл бұрын
Точно! Стол же!
@Влп-м5ш2 жыл бұрын
На выходе должно работать, вопрос ресурса 😁
@mmulbatoora6532 жыл бұрын
Table is handmade even with non repairable parts. We do not waste anything.
@Андрей-п2э4я2 жыл бұрын
Все по людски делают,профессионально,с душой.4 часа смотрю не насмотрюсь,самому теперь ремонтировать захотелось.
@михаилк-ц6н2 жыл бұрын
Вот боюсь потом в масло систему зальют отработки .Значительно дешевле чем покупать новое. В итоге незадля снова в ремонт. В редуктора часто на видео что слили то и обратно.
@Да-какаяРазница-ж5ф2 жыл бұрын
@@михаилк-ц6н Дык через центрифугу очищают масло от мелкодисперсного металла и снова в бой))))
@6tamaka92 жыл бұрын
если токарь бес пальцев и глаз, какой он профи? Этот мастер без глаза... на станке написано ха класс, резец из Г0вна, точность напильника, куском круга зачистил, полировка пастой гои... да пипец насосу....
@vikingmihinlank9692 жыл бұрын
@@Да-какаяРазница-ж5ф Центрифуг… зачем заморачиваться? Можно просто оставить на пару недель чтоб отстоялось и слить с осадка ))
@АнтониЗиммер2 жыл бұрын
С ума сойти сколько смотрю эти ролики. Это первые у кого есть стол...............
@masan-1656 Жыл бұрын
Я впервые вижу,что у индусов микрометр есть...
@masan-1656 Жыл бұрын
Я впервые вижу,что у индусов микрометр есть...
@АнтониЗиммер Жыл бұрын
@@masan-1656 ДЫК есть то он есть, а что это ? Они знают??????
@arjanlangerak38423 ай бұрын
Het niveau gaat omhoog 😂
@Fierofreak012 жыл бұрын
What a refreshing video! I watched numerous videos and this was one of the best. You could really tell that this guy knew what he was doing and took pride in doing it. Equally impressive was the condition of the machines and cleanliness of the shop. There wasn't swarf all over the floor or machines, he didn't throw the parts on the floor only pick them up multiple times. He even took the time to cover the ways when he got the grinding stone, dressed it and ground the pump gears. Great job!
@Greenpeace4652 жыл бұрын
ya this guy has his shit together
@fernandopiaba12 жыл бұрын
1 A MORTE DE DIMAS - O PROCESSO DE DESENCARNAÇÃO - kzbin.info/www/bejne/qZK6lpaXl5Jqis0 2 Morri e Agora? Áudio Livro Espírita kzbin.info/www/bejne/l5vdq59vrcyqr68 3 Semeando e Colhendo - Contos Reencarnacionistas kzbin.info/www/bejne/raDJd32NeN1sq9E 4 Minha Vida na Outra Vida - kzbin.info/www/bejne/f5XEoXikpptokNE 5 Dois goles para três kzbin.info/www/bejne/sGa6foNoaqutZtU 6 A Reencarnação de Segismundo kzbin.info/www/bejne/aoK8h4N9aslqmNU 7 Sempre contigo senhor Jesus! kzbin.info/www/bejne/hKjJoaSIpZiriLc 8 Hora de desfazer os grilhões mentais de espiritos das trevas com a humanidade kzbin.info/www/bejne/maG7lKSngqmhZq8 9 O Vôo da Esperança 1/2 kzbin.info/www/bejne/bYfUp6WsmNBqntE 10 Agnus Dei ♪ Alleluia kzbin.info/www/bejne/aHzPaZKbgdaLpLM 11 Agnus Dei ♪ Alleluia Jotta A kzbin.info/www/bejne/r2WvhpZ7mNaVedk
@bradley24272 жыл бұрын
The guy is welding without a mask, will be blind within a year
@bluesky.believeitornot.18822 жыл бұрын
2:08. Exploitation of child labour again.. This video should be banned. Exploitation child labour and child abuse should not be praised but condemned. Period.
@joey664362 жыл бұрын
@@bluesky.believeitornot.1882 yes the kid should be on the streets or in a sweat shop. Not working with his father in the family business learning very useful skills that will ensure a good income and success as an adult.
@Antonio4644642 жыл бұрын
Молодежь помогает набирается опыта прям глаз радуется))))
@pavelpavel79382 жыл бұрын
Скоро откроет свой стартап. Можно сказать новый Илон Маск в гараже растет )))) Хотя, возможно им просто надо что-то жрать... но, это не точно.
@Andrei0110002 жыл бұрын
@@pavelpavel7938 ага используя технологию не так как предписывают. Нет знаний, да и похер. И так сойдет.
@frankmchutchison94362 жыл бұрын
love watching true craftsmen at work, I have been in this industry all my life and I know quality when I see it. Thanks. Hutch
@ghostdevill2 жыл бұрын
My respect for the lathe guy! He really knows his thing! Very good job! I have watched a lot of this kind of videos and I can say for sure this pump is revived as new! If I ever get stranded with a broken pump in Pakistan you guys are the way to go!
@briananthony40442 жыл бұрын
Just curious, how do you know it was Pakistan and not India or Bangladesh?
@владимирдюйм-щ6х2 жыл бұрын
Притирать бронзовые щеки друг об друга с пастой нельзя. В насосе будут работать как притиры. Шестерни износятся быстро по торцу. ИМХО
@jaewok5G2 жыл бұрын
@@briananthony4044 by their dress n some of his videos indicate location and it always seems to be Pakistan, specifically rawalpindi in the north which is a large industrial center, whereas India n Bangladesh trend more electronics n manufacturing respectively - from my observations.
@briananthony40442 жыл бұрын
@@jaewok5G Yes it is. I went to the home page and it said they were taken in Pakistan. I think of Pakistan as home to fanatical Islamise, nice to see videos like this of ordinary people just enjoying each others company and carrying out their work, passing skills to those younger.
@jaewok5G2 жыл бұрын
@@briananthony4044 well, it's a big country, they got some of those nutters there too, but I doubt they're reliable employees
@garyjarvis40582 жыл бұрын
Finally a professional shop with a real work table and micrometer. Not the typical working on dirt, throwing machined parts an the ground and smashing everything with a hammer that is the usual shop we see. I'm positive the products this gentleman is making are as good as new. Thanks for sharing.
@herowillrose31982 жыл бұрын
Used what they have and adjust what they could within little or acceptable resources available. Greatest gift for youngster experienced.
@christiangastin42292 жыл бұрын
A true skilful Transmission mechanic passing on his brilliant skill to his young Apprentice , thank you Sir for sharing with the world to appreciate , Cheers
@lourias2 жыл бұрын
Was it really his young APPRENTICE, or taking advantage of a child? I just saw another video that showed a child in the factory who could easily get hands in a machine and lose them.
@johnfox38452 жыл бұрын
@bllourias I can't speak for the other video, but the boy in this one sure didn't appear to be 'taken advantage of'. He seemed eager to help and was grinning widely on several occasions. In many countries this is exactly how you become experienced in your future profession. He is very likely the son of the man in the video and seems happy to help out.
@bluesky.believeitornot.18822 жыл бұрын
2:08. Exploitation of child labour again.. This video should be banned. Exploitation child labour and child abuse should not be praised but condemned. Period.
@jaymann3 жыл бұрын
Great engineering skills displayed there. Good to see youngsters learning the trade - starting off at the bottom and making their way up. Best regards from the UK.
@joereese94732 жыл бұрын
He is an employee for sure..
@russelltullis25702 жыл бұрын
I went threw operating engineers aprentiship program in the states it saved me an gave me work my entire life thus far much approve
@frankmchutchison94362 жыл бұрын
could not agree more!
@Ediemachuli2 жыл бұрын
It’s child labour
@jackdaniels94012 жыл бұрын
@@Ediemachuli yea its a child labor"aka ..education, toward get a man job in the future... 👽
@sammiceli76453 жыл бұрын
2 up on the mechanical skills and the young boy eager to learn the trade, give him a surprise gift for learning the trade. This is how I learned the mechanical trades. There will always be repair shops in the future. Sam from N E USA 👍🏽
@avatarmong2 жыл бұрын
Am in North America now but used to go to lathe and mechanical shops as a boy in Afghanistan; and I’m so glad I did. I can repair almost anything now.
@carlosdevenadotuerto81432 жыл бұрын
Finally a table in Pakistan. Congratulations
@peterkemna10082 жыл бұрын
Das ist noch richtiges Handwerk. Ohne CNC Technik oder digitale Messtechnik. Absolut perfekt. Solche Leute brauchen diese Länder die diese Maschinen und Fahrzeuge in Schuss halten.
@kacermalik2 жыл бұрын
Danke und leibe grobe von Pakistan
@stevenhorne5089 Жыл бұрын
Are you kidding me? This guy is a master among MASTER's!!! I'm speechless!!!
@MagElan682 жыл бұрын
Искры были-значит ремонт удался!!!
@ssnoc2 жыл бұрын
It amazes me to see how they work in basically dirt, yet produce terrific results using only basic tools (not including the lathe) amazing people - they earn our respect 👍👏
@slengineeringworks26692 жыл бұрын
My kzbin.info/door/5-oYXe8rCPp8RIV11kAnNQ-youtube channel
@ZygmuntKiliszewski2 жыл бұрын
Yes 👌.
@_Wai_Wai_2 жыл бұрын
You would think this is only in other 3rd world countries, but my experience working at a shop that processed turbine blades for Pratt & Whitney engines back in 2001, totally reminds me of this work environment, only somewhat better. Plus the kind lathes I see hear were being used at machine shop in the University I went to in Connecticut from 1996 -2001, to teach engineers about Metal cutting and manufacturing.
@ZygmuntKiliszewski2 жыл бұрын
@@_Wai_Wai_ Thank you for your answer. I am full of admiration for these many workers. They do their job under difficult conditions, often without precise measuring devices, etc. You need to have a fairly perfect mind to do your job. I am always full of admiration for these People. Big RESPECT. Regards 👌. Moreover, as a teenager, I helped the blacksmith, Mr. Józef, in the forge. Through the levers, I started a large air smoke machine and a vertical drill with a large flywheel. Later, I also operated a large milling machine. These were my hobby activities. Currently, I specialize in the new generation BLHF-RM four-phase synchronous motor. Please see to KZbin. Regards 😀.
@BagsRivaRaet2 жыл бұрын
@@ZygmuntKiliszewski bb u vvi
@anton1011012 жыл бұрын
He's got the eye, great work! Nice to see the kid joining in, learning the trade.
@scout2nut2 жыл бұрын
Worked a Cat certified rebuild facility here in the states for 16 years and I gotta say, other than corporate having cleanliness issues, dude did a fine job on that pump. salvaged the gear sets and and resurfacing the pump shells looked great. would love to see a flow test of it, but I think it should get the job done, after all its just a danged ol' loader 😉 good work guys
@AmazingThingsOfficial2 жыл бұрын
Thanks for your love and appreciation 😊
@mooglemy38132 жыл бұрын
Amazing work. Very talented Machinist. Without this type of Machinist they probably couldn't afford a new Cat part. Well done and a great video as well.
@IgelTMB2 жыл бұрын
Серьезная работа, в этих насосах очень важна точность поднонки поверхностей
@6tamaka92 жыл бұрын
какая тут точность? жесть просто, что этот одноглазый мастер сделал... станок хай класс написано, а резец на камне заточил))))))ну у соседей можно купить с сменными пластинами, ну не так дорого же ... китай давно норм делает, как раз для подобных мастеров... и понта больше будет, типа золотом точит...
@IgelTMB2 жыл бұрын
@@6tamaka9 в том и суть, сделать на хорошем оборудовании каждый дурак сможет
@dakhnosergey2 жыл бұрын
@@6tamaka9 Падумаешь, резец чистоты не дал, за то вон гляди, напильником поправим и алмаза не надо. Пастой гои затрем и работать будет.
@jimmason10722 жыл бұрын
This is the cleanest most modern shop I've seen on these types of videos...and they even have a table.....that's really moving up......
@ruslangertje96082 жыл бұрын
Я уверен что этот насос прослужит дольше чем новый 👍👍👍
@michaelbedell65232 жыл бұрын
I was very impressed with his skills and a very functional workshop. Great workmanship!
@davetaylor47413 жыл бұрын
As with a lot of these videos you think that can't work but no doubt it does. 100% probably not but you work with what you have. It makes a change these days to see things being repaired not thrown away. And to see generations of people keeping that going. All most of us know how to do now is open the box from China and take the new part out.
@peterparsons71412 жыл бұрын
Nice skillful work. Father & son, the man is obviously proud of the son who takes pride in his work. Good video !
@Олег_Николаевич2 жыл бұрын
Мастера с большой буквы 👍
@Garrizel2 жыл бұрын
авантюристы каких свет не видел.
@mic75322 жыл бұрын
I am impressed. Attention to detail working in 10 to 20 thousandths, those bushings are not easy. It was like butter going in. well done, very well done.
@PaulHigginbothamSr2 жыл бұрын
More like .001 to .003 inch.
@Благополучнытекоторыенедожилид3 жыл бұрын
Не может быть, они придумали СТОЛ для работы !!!😆
@сергейниколаев-я9щ2 жыл бұрын
походит ..немного ))
@ЧеГевара-ь2д2 жыл бұрын
Не, на кортанах и в песке каноничнее)
@Благополучнытекоторыенедожилид2 жыл бұрын
@@ЧеГевара-ь2д Так, да
@РифкатСиразиев2 жыл бұрын
Я тоже заметил что есть стол и наждак не на земле
@Первыйпослебога-я4с2 жыл бұрын
@Коля Весельчаков мне вот интересно как потом работал этот насос после того как частицы алмазной пасты вьелись в поверхность которую они притирали)))
@oscarmayer98232 жыл бұрын
The blacksmith and the artist, reflect it in their art, they forge their creativity, closer to the heart!
@jimkillen10652 жыл бұрын
I was amazed on the craft skills . From lapping the surfaces to grinding the faces on pump bodies , gears ect . This just shows you can do things with a minimum amount of equipment if you know how
@ZygmuntKiliszewski2 жыл бұрын
Yes, precisely put. I see that you have the ability to evaluate the work of these Brave Craftsmen. Regards 👌.
@wattienewton54472 жыл бұрын
It is amazing man ,our work shops have thousands of dollars of expensive machinery ,ten years down the track we have new technology and replace them , watching these bloke's work brings back old school refreshing too watch
@Janushek-ob3id2 жыл бұрын
Thanks! See how he does it, he tries very hard: kzbin.info/www/bejne/gJmVpqB9qKqMfsU
@avtorazborkolpino2 жыл бұрын
мне понравился сьемник для извлечения втулок из глухих дырок
@user-ex9yi4br8g2 жыл бұрын
ТОЧНО
@legion22522 жыл бұрын
тож заметил, аж отмотал чтоб понять как работает надо на заметку взять
@nz32302 жыл бұрын
Электродуговой?
@AlecatrRU2 жыл бұрын
Хорошая работа приятно смотреть все четко и по делу.
@PoMkA2522 жыл бұрын
Торцовка резьбовым резцом это мощно !
@Влп-м5ш2 жыл бұрын
Главное долго притирать пастой гои, в целом эпично 😁
@PoMkA2522 жыл бұрын
@@Влп-м5ш и ведь притер то как! Дааа, им бы десяток советских заводов, они бы нехило поднялись в технике.
@zsozso4112 жыл бұрын
I was supposed to watch a movie on Netflix but I got stuck here and I love it!
@luizgomes5602 жыл бұрын
Serviços bem feito nesta bomba de engrenagem vocês dois estão de parabéns gostei muito
@ЕрмекТумарбаев Жыл бұрын
Оте керемет,кол аягына Аллах дерт бермесин ,таза адал енбек!!!
@ZygmuntKiliszewski3 жыл бұрын
Precision work done by Mr. turner. I have not yet seen the presented grinding attachment for a lathe. Find me a modern turner who would be able to operate these devices. Great recognition. Congratulations 👌.
@ZygmuntKiliszewski3 жыл бұрын
Thank you 😀.
@encorespod21353 жыл бұрын
Adam Booth had good video on toolpost grinders a while back.
@pedrolourival59993 жыл бұрын
Oi Mãe jevsd
@spannaspinna2 жыл бұрын
He probably built it
@versatrade12 жыл бұрын
This is Pakistan. Proud of this guy's skills at a different level with minimum tools to do the things. What a country! When you have workforce like this, anything from needle to spacecraft you can build. Thumbs up!
@spannaspinna2 жыл бұрын
Spacecraft are a bit more complicated than a cat tranny pump
@pedrochip3 жыл бұрын
amazing and its finally nice to see a proper operation with tables and chairs 🙂
@heinzd55232 жыл бұрын
Yeah right. This is the first video of this series where the mechanic has a table and charirs :-)
@christophercolumbus89442 жыл бұрын
@@heinzd5523 that's a lunch table
@josebermudezleon96422 жыл бұрын
Me encanta ver a los pakistaníes trabajando. Se ven muy seguros de lo que hacen.
@uliwestphal79922 жыл бұрын
Ich finde deine videos super! Bin selber Maschinenbauer. Ich finde es gut das dein Junge das Handwerk auch so früh lernt. Hat mein Vater mir auch beigebracht!! Grüsse aus Germany von ULI
@a..5132 жыл бұрын
Опять в деле согнутый электрод, только он поможет.
@mastermachine8692 жыл бұрын
Machinists Rules! Great job! The boy reminds me of my son eagerness to learn machine works.
@Sibirsky_sibiryak2 жыл бұрын
Мой трудовик в 2001г таких звиздюлей бы ему надавал, за работу у станка с опущенными рукавами! Мне 35 годиков, за станком работал последний раз в школе, но эту истину запомнил на всю жизнь!
@joesolo99463 жыл бұрын
Impressed with the skills of the machinist...
@peggyremos2 жыл бұрын
Fantastic work. Real world. We're work gets done. In the west the over regulations are killing the golden goose.
@TOONMAN2002 жыл бұрын
I'm impressed, the quality of work these people put out. Great video show's what you can do without all the fancy machines like we have in the USA.
@travelling_stephen2 жыл бұрын
You have to admire old school skills especially being past on to the young lad. You can not beat the human touch and eye. I'd trust their skills rather that some all singing machines.
@НиколайБирюков-е5л2 жыл бұрын
Я инженер механик свой первый болт выточил в1965гна старом токарном станке наверно преобретенном еще по лен лизу.Станок был установлен в кузне нашего колхоза.поэтому сравнивая увиденное меня порозило . Здесь ЧПУ на коленке.Я думаю что из парня получится хор.специалист.Но в настоящее время еще нужно спец.образование.Хотя человеческое прикосновение победить нельзя.
@игорьбуслов-и2я Жыл бұрын
Мужик заслуживает уважение,всё по уму и по делу,мастер!!!
@TVGUKJO3 жыл бұрын
It's a very amazing video!! I'm healing by watching videos every day during break time. 😎 from Korea
@diegoknyte2 жыл бұрын
Respect for these craftsman. Of all these vids here, he’s got the nicest lathe.
@andreasspizinn50732 жыл бұрын
Токарь красавчик- все на глаз)))
@МаксимОкипний2 жыл бұрын
Микрометр имеется. На вид тяп ляп. Но видно что на опыте.
@RA6ApARA6a2 жыл бұрын
На ОДИН глаз.
@KilllllmePlease2 жыл бұрын
@@МаксимОкипний микрометр всегда можно подкрутить если не сходится.
@gidroparik2 жыл бұрын
@@KilllllmePlease накуй ему что по подкручивать, не суди по себе диванный ихсперд
@mannyfernandez68602 жыл бұрын
im from the Philippines and i can truly say that this guy is at the top of his chosen craft...rebuilding a gear pump to such tolerances using only the most basic tools is a praiseworthy skill. Respect..
@brucemiller81092 жыл бұрын
Hes a Master Machinist...almost all extinct in the USA.
@mannyfernandez68602 жыл бұрын
@@brucemiller8109.you still have a few masters still turning out magnificent pieces..im watching ABOM79 on KZbin as i type..he is my favorite turner.
@magnum-motos55442 жыл бұрын
Top de mais crianças junto com os pais aprendendo uma profissão não sofre no futuro parabéns
@alfredomosquera58322 жыл бұрын
What really amaze me is how childs, are involved in hard works since very early age. In our "developed" countries this is not permitted. But boys who start to work early in his lives are better citizens than those who are gaming or playing. Cheers and my profound respect to those miniheroes, from my poor but not surrended Venezuela.
@gersongomesdasilvagomes53242 жыл бұрын
Deu tudo certo...Deu trabalho demais...vale mas de 1.0000 like Boa sorte e sucesso
@tuhoangminh6722 жыл бұрын
Tôi suy nghĩ..bạn đã tận dụng tối đa thiết bị tiện và tay nghề bạn đã đạt tới đỉnh cao..chỉ tội cho nhà sản xuất khi thấy bạn khắc phục lại bơm như thế này..💖
@FirstSuiGeneris2 жыл бұрын
*Nice job, on the rebuilding of the pump! You guys are craftsmen!*
@redfordrn2 жыл бұрын
Another Marvelous video of Pakistani technicians at work. God bless Pakistan. You guys Rock.
@JonDingle2 жыл бұрын
Seemed to do a tidy, job. Good to see him teaching his son (I presume?) the skills to earn a living and take the business into the future!
@rodrigo_monteiro2 жыл бұрын
yes, it's called child labor.
@JonDingle2 жыл бұрын
@@rodrigo_monteiro You can call it that if you want. It happens in every country. Even here in the UK. From auctioneer's to farmers to shopkeepers they all use family to "help out".
@travelling_stephen2 жыл бұрын
@@rodrigo_monteiro what a stupid comment. It appears that the young lad is learning a very valuable skill, and most probably is the family business which one day he might be in charge of. Better than being a drop out sitting on the street corner begging for a bit of food.
@travelling_stephen2 жыл бұрын
@@JonDingle absolutely correct my friend.
@newtonpaiva38712 жыл бұрын
adolescentes, futuros profissionais....logo....um país com criminalidade ZERO!!! parabensss
@RRaucina2 жыл бұрын
A table!!! and a chair! Let the progress begin finally.
@adnanshaukat26562 жыл бұрын
MashAllah great work shown in this entire video, simple person, but great skills. Weldone Pakistanio. Keep posting such talented videos.. 😀😀😀😀 ❤❤❤❤❤ 👍👍👍👍👍
@cessealbeach2 жыл бұрын
Nicely Done! most of the time, it's the bushings that need to be replaced
@gdfggggg2 жыл бұрын
Somebody who actually did a decent job, in a clean workshop!
@user-jz6wr8dx9w2 жыл бұрын
Дак почему они сначала проводят мех.обработку,а после это все чистое и ровное, долбят молотком? Может быть я не прав,но первый должен быть молоток,а после притирка. И ещё... Покажите этому человеку,как нужно пользоваться микрометром. А то так,как он его толкает, можно на любой размер затолкать. И сдирать затянутый микрометр, с измеряемого изделия тоже не нужно,так как винт скоро сотрётся на половину. Мне кажется проще ослабить и снять спокойно... Возможно я не прав.
@RicoJovanni2 жыл бұрын
да нормально, у него же получается и это хорошо. думаю для их спецов это достаточно высокий уровень - пользоваться микрометром, а как уже вопрос второй. его бы поверить и офигеть что он там показывает погоду на марсе в полнолуние.
@fainderskurs-koi87672 жыл бұрын
@@RicoJovanni Нахрена его поверять? 6лть, де вас д"билов учат?. Это один измерительный инструмент. он им меряет, по нему и точит.
@RicoJovanni2 жыл бұрын
@@fainderskurs-koi8767 тамже где и вас. Он им в натяг меряет. Какова повторяемость измерений сломанным инструментом? Что-то подсказывает мне далеко не 100%. Если для вас это норма, то извините что задел ваши профессиональные фибры души. Всего хорошего
@user-jz6wr8dx9w2 жыл бұрын
@@fainderskurs-koi8767 слушай, умник... Про высоту шестерни и толщину средней части насоса,с тобой можно согласиться. А замеры диаметра шейки шестерни? Втулка наверняка идёт в нолях. Трещетки на микрометре нет,о каких точных измерениях говорить? Ты похоже один из них, только русскоязычный.
@fainderskurs-koi87672 жыл бұрын
@@user-jz6wr8dx9w Я тебе больше скажу, я могу научить и не одного из них. Ты еще мало чего в жизни видел. У меня на работе, (неудобный зараза) микрометр на 25, без трещетки. то ли болгарин, то ли венгр. Там фрикцион. но так5и да, нам без трещотки плохо. за сим отнес на работу. Есть шанс, что не сопрут. ))) Шестерни ремонтные. Он под старые втулки протачивал наверно. я уж не помню. Давнож смотрел, теперь только в сраче участвую. Если ему нечем ни развернуть, ни расточить втулки, то он поступает ситуативно. проточил ремкомплект, на сезон хватит.
@michaelszczys83162 жыл бұрын
We disassemble, then we check all bearings and surfaces and take note of any in need of repair. We fix anything that needs it, and ONLY that. We clean it up and paint it pretty. Then we package it up as TOTALLY BRAND NEW I once worked at a place in DETROIT that did that, only they were marked ' remanufactured ' one of my jobs was checking bearings to see if they were reusable.
@rodrigoruiz7092 жыл бұрын
I love to see the workshops that have cleaning. show more their professionalism
@ramavijaya1482 жыл бұрын
You are simply great . With little resources you dp a wonder full job . From the company this will cost a fortune
@Denik-ur4tl2 жыл бұрын
Классно микрометром пользуется,с его усилием можно и +5 соток затронуть)Но притирка пастой это шедевр.Хотя растут,я думал он её об пол доводить будет.
@Barzoj.2 жыл бұрын
Я согласен с тобой но темнемение ремонт произведен и будет работать может быть с ресурсом меньше чем новый но а может быть и также как новый а покупка там уних такой запчасти новой неподёмная сума да и в росии такая запчасть стоит как крыло от боинга и некаждый может позволить сибе купить новое
@alexeibelskiy39882 жыл бұрын
это первое видео где есть стол...и он чистый. Но традиции берут свое - втулки выбивали на полу.
@Alex-Che_2 жыл бұрын
поплакал над микрометром и направляйками токарного, но зубья то он зачем сточил в диаметре? Мне нужен второй платочек
@HauserBal732 жыл бұрын
@@Barzoj. Это с каких пор шестеренчатый насос, может стоить как крыло от Боинга? Если эта деталь так дорогА, то и ремонтировать её надо по нормальному. Не точить, а потом непонятно как доводить, а шлифовать на плоско-шлифовальном.
@Barzoj.2 жыл бұрын
@@HauserBal73 внимательно комент прочитай а потом пишы ето первое второе если у тибя есть деньги для покупки новой запчасти то ето хорошо у них нет таких денег и человек его отремонтировал на коленке третье нашы спецы без оборудования неспецы а человек смог имея минимум инструмента я понимаю что всё неправильно но оно будет работать
@smailsmiley25092 жыл бұрын
مرحبًا بكم جميعًا ، بارك الله فيكم عندما أنظر إليك من فرنسا ، فأنا عاجز عن الكلام ، عندما أرى أطفالًا يعرفون يعملون على محرك كاتربيلر كبير بلدوزر كاتربيلر أفخر به
@wanndherklausz2 жыл бұрын
Parabéns a esses guerreiros do trabalho, bons profissionais com ferramentas básicas.
@АлександрВолченсков2 жыл бұрын
Вот теперь я знаю, к кому обращаться в помощи починки старенького фиата 🙂🙃
@ВитяХвойницкий-ы9г3 жыл бұрын
Ух ты....я думал опять солярочькой помоют и ОК.......Ан нет........
@falcon85532 жыл бұрын
I'm always amazed at the level of craftsmanship
@Александр-к3ы2т2 жыл бұрын
Ну это уже по сравнению с тем что раннее видел -уровень... Станочек боле мение свежий и не загаженный ,какие не какие резцы есть, даже микрометром удивил , правда пипец он микрометр перетягивал .Да и работа выполнялась не на кортонах и не на земле в пылюке , как обычно у этих ребят бывает . Молодец что пацаненка обучает ,толк будет).Люди работяги здесь ни чего не скажешь ,но вот судя по действиям , уровень учебных заведений где обучаються всему что сязано с металообработкой -слабоват , хотя возможно все упираеться в минталитет.
@fainderskurs-koi87672 жыл бұрын
Уровень на высоте, особенно если в таких условиях и за такие деньги. нибось нашему дай, в сто раз условия, так закажет через интернет, сделает штук пять перепродаж и втюхает потребителю. И ролики снимать не будут. Вот тут точно менталитет.
@aleckaleck24922 жыл бұрын
С микрометром конечно по жесткому обращается.
@fainderskurs-koi87672 жыл бұрын
@@aleckaleck2492 У него их много. этот китайский, под скобку.
@user-ct5py7vw7v2 жыл бұрын
@@fainderskurs-koi8767 Работу показали а результат какой? может давление масла будет в два раза ниже нормы.
@fainderskurs-koi87672 жыл бұрын
@@user-ct5py7vw7v Ну посмотрите вокруг, нет там блохеров. Я на всех роликах, только раз мобилу видел. Лиди работают. Еслиб не было давления, то смоктали бы они буй через тряпочку. Не судите вы всех, по ситуации на нашей территории. Где все блогеры и рукожоппы. Главна чтоб лайков набить.
@htmars2 жыл бұрын
if everyone had this whim and dedication the machines wouldn't spoil so much
@bobcha42242 жыл бұрын
Best regards from Paris God bless you. Excellent job.
@mulyadi70012 жыл бұрын
Pekerjaan yg membutuhkan extra ketelitian👍..... salam dari indonesia.❤
@Mitya-RUS2 жыл бұрын
А представить себя в такой жизни не сложно... Вот твой батя, вот у вас станок, сколько наточишь втулок, столько и поешь...
@pavelpavel79382 жыл бұрын
Это называется - малый бизнес. Очень его нам не хватает, но мы туда усиленно идем :)
@organbuilder2722 жыл бұрын
This is a huge cut of the face of the pump. Notived how he forced the micrometer onto the pump plate - good way to ruin the surfaces of the instrument. He takes a precision part and puts it on a conrete floor and pounts the daylights out of it - Indian precision parts - Wonderful.
@joaopereiralindasjoao50702 жыл бұрын
Admiro a sincronização que eles têm para o trabalho (boa equipe)
@lucaguerra67032 жыл бұрын
Bravissimo, il tornio trasformato in rettifica !!!🙂👍 con tanto di ravvivatura mola con diamante 😀
@Pegaso012 жыл бұрын
Excelente reparación. Inmejorable. Un diez.
@carloskinderknecht53672 жыл бұрын
Deberían usar mascara cuando sueldan por eso pierden la visión de tan jóvenes.
@mrb.56102 жыл бұрын
First half decent shop I've seen so far ... using a workbench and not a dirt floor plus the lathe doesn't look like it's been used as an anvil. And the machinist isn't using a 3' length of pipe on the chuck key either ! Keep it up, guys - although I'd be tempted to put a guard on the grinding wheel and learn how to use a micrometer properly.
@joaopinheirodeoliveira14922 жыл бұрын
Parabéns mestre torneiro … E ainda Por ensinar seu filho a profissão …
@rodrigo_monteiro2 жыл бұрын
sim, chama-se trabalho infantil.
@joaopinheirodeoliveira14922 жыл бұрын
@@rodrigo_monteiro vai lá e fala para o pai do menino ! Talvez ele não sabe .
@CllAslnr2 жыл бұрын
Pakistan'da en temiz çalışan usta olabilir!! :)
@Spookieham2 жыл бұрын
To be fair this is one of the few videos where a fair bit of skill is involved.
@herbertalfredbecker3196 Жыл бұрын
Eine saubere und aufgeräumte Werkstatt mit einem Dreher, der sein Handwerk versteht. Die Maschinen und Messwerkzeuge sind moderner als in den Buden, die sonst hier gezeigt werden. Alle Achtung
@kakbudtobi2 жыл бұрын
не видно как позиционируется деталь в патроне по приборам, на резец как в видео, я думаю опасно, можно до десятки плоскость увести от перпендикуляра к отверстиям под шестерни
@МаксДе-е2ъ2 жыл бұрын
Верный "на глаз" всегда с мастером, а точность "что-то вроде" вполне достаточна. УАЗики так же ремонтируются )))
@fainderskurs-koi87672 жыл бұрын
@@МаксДе-е2ъ не трожь спеца, видишь, ромчик с дивана сотку ловит.
@gidroparik2 жыл бұрын
По каким приборам мудло? Деталь стоит в центрах
@kakbudtobi2 жыл бұрын
@@gidroparik , где тут центра? 3:40 , чудило...
@Влп-м5ш2 жыл бұрын
@@МаксДе-е2ъ ну глаз у него профессиональный, особенно левый. В целом их ремонт снижает амбиции по оборудованию в разы 😁
@mikepreciado78072 жыл бұрын
Camera work is real good to! These guys make it work
@thepostman692 жыл бұрын
Nice new lathe boys! Good to see yall starting to make your lives easier!!!
@saeedsalam2 жыл бұрын
At first when watching I did not understand. But at the end of the video, I confirmed that he is a mechanical genius
@РизванГалимов-б7и2 жыл бұрын
На какой угол надо загибать электрод ?))))
@ЗаурЮнусов-х3ф2 жыл бұрын
Они так напряжение регулируют🤣А так на одном токарном работа хорошая.
@Первыйпослебога-я4с2 жыл бұрын
@@ЗаурЮнусов-х3ф особенно когда на глаз выставлял параллельность)))
@johnmartin20793 жыл бұрын
I don't know who showed you how to read calipers or feeler gauges but it should feel like a razor blade cutting through paper not pulling them off.
@kotej97032 жыл бұрын
У нас много что должно быть по технологии, по каким то рекомендациям и допускам. Но из практики так не делают, максимум специализированные организации или военные и то не факт. Думаю для деталей не требующих строгих допусков можно и на коленке
@Ghadiali2 жыл бұрын
Very impressive and highly skilled work. I hope young lads training as apprentices would carry on the trade given chances of course.😍👌👏
@м555-б1б2 жыл бұрын
Таких мастеров в россии не встречал .работал во многих краях стаж 54 года
@mava56342 жыл бұрын
considering the conditions they have to work it is worth and impressive to watching this
@windows55062 жыл бұрын
These people are worthy of respect 💯👍👍👍👍👍👍👍👍👍👍👍
@RaulGomez-xi4qk3 жыл бұрын
Excelente video gracias por compartir tu gran esperiensia desde costa rica Maestro