How to Replace a Stove Element Receptacle | Repair & Replace

[@AmreSupply]

Did this video help you fix your stove? Did you run into any problems? Let us know in the comments!

[@squatch545]

I notice on my stove that the smaller elements have pigtail ends whereas the large elements have blade ends. Is this normal? Are they interchangeable? I need to replace one, and was wondering if it matters which kind of end I got?

[@AmreSupply]

@@squatch545 Thanks for watching. Ultimately it doesn't matter if its a pigtail or blade style terminal as long as there is a good connection. Receptacle kits come in full length kits and universal wire splicing kits. With the pigtail connectors you can always use a universal kit and use heat shrink to seal the connection. www.amresupply.com/catalog/Element-Receptacles-Contacts-632521-AD1H

[@trogman]

The receptacle kit I bought from Amre didn't have the wire already connected to the black plastic terminal. I made a mistake of connecting the wire to the wrong end of the terminal. When I try to plug in the heating element it wouldn't fit and it puzzled me for a good 15 minutes. Looking back, the instruction do have a very small graphic showing the correct orientation. I managed to undo the wire and plug back to the right way and everything work out.

[@AmreSupply]

@@trogman Thanks for sharing your experience, we're glad that it all worked out in the end!

[@travisskaggs2835]

No because you missed a set. You have to put wires in receptacle. But what do if it not getting the connection you need when put element back in and it still not heating up like it should

[@KamalSingh-eb7yv]

Excellent way to show how to trouble shoot and replace the parts. Thank you dry much.

[@AmreSupply]

You are welcome, we're just happy to share some good info!

[@charleneblack2792]

Finally, my stove element will work! I've replaced the element twice, then figured out it must be the receptacle. Your video made it easy!

[@AmreSupply]

Thank you for watching, we're glad that this video helped you repair your stove!

[@i.o1828]

🎉Great explanation.. With all safety way.. Clearly.. Quietly.. 💯💯💯

[@AmreSupply]

Thank you, we're just happy that you found the video helpful! If you're curious we have many more, we have a "how it works" playlist which have some detailed animations: kzbin.info/aero/PLCo9SMjkdWBxWwrWCmzvRMSi2kLo9bGdp

[@rosiedls4395]

Excellent explanation. Clear, precise, concise and so easy to follow the step by step process.You should be teaching. Thank you for your professional help.

[@AmreSupply]

Thank you for watching, we're just happy to help! This is how we are teaching through the effort of our video team! It takes time and thought to put together videos like this with narration, graphics and all the close shots. We're working on more videos specifically a series on refrigerator repairs!

[@nabeelazmat7247]

A very knowledgeable and professional video. Thank you for uploading the knowledge. GOD bless.

[@AmreSupply]

You're welcome! We're just grateful that people are finding these videos helpful!

[@estebantorres3002]

Excellent explanation👍🏽

[@AmreSupply]

Thank you, we're glad you found it helpful!

[@lesdawg71]

thank you very much , this video helped immensely

[@AmreSupply]

You're welcome, we're just glad to help!

[@johnrayfield9745]

Well done video! Thank you very much.👍

[@AmreSupply]

You're welcome, we're just happy to help!

[@crod5154]

Wow amazing explanation! It's a 3 in 1 video ! I have to replace the full lenght kit , whats the name of it I can found it online? Thank you , it will make me save hundred dollars 🤞🏼

[@AmreSupply]

Thank you, we're just happy to help! You can find a replacement receptacle that fits exactly for your stove using the model lookup tool here: www.amresupply.com/lookup Or you can look at a universal kit here: www.amresupply.com/catalog/Element-Receptacles-Contacts-632521-AD1H

[@kennethku7036]

how do i check to see if the wires coming from the infinite switch that connects to the terminal block has power/ or carries voltage to the block?

[@AmreSupply]

Thanks for watching. We don't show live voltage testing, only continuity tests in our video. This video shows how to test the infinite switch to see if it has failed as well as checking the element, and the wires for continuity through the back. kzbin.info/www/bejne/f2jMY2iMhcxgqK8

[@rjking4658]

Thank u for the great info I appreciated

[@AmreSupply]

You're welcome, we're just happy to help!

[@westacres3619]

Would be nice to see how the wires slip into the black block

[@AmreSupply]

Thanks for watching. Either the wires will be built in, or the wire connectors just slide onto the terminals.

[@BigbassgrabberDre]

did this and when i turned the break box back on the stover spark fire and started to smoke some is that normal ????

[@AmreSupply]

Thanks for watching. If there are sparks, or smoke, that is not normal and you should always immediate shut off the breaker. With the power off you can check the connections and see if there is any melted wires or burn marks. Double check to make sure there are no short circuits, or any part of a wire or connector touching another wire or the metal housing.

[@OceanMetTheSky]

Hi, my receptacle box just slid off from the burner part as I lift the stove up occasionally to clean underneath all burners and stove top. Do i just turn the stove off and slide the receptacle back to the burner? Does it actually attach to it or just hang on?

[@AmreSupply]

Thanks for watching. The receptacle screws into the metal rim around the burner. You can see this at 2:24 . If the receptacle slid off and there is nothing wrong with the wires then you can simply screw it back onto the mount.

[@OceanMetTheSky]

@@AmreSupply Hi thank you for the clarification. I guess i was not saying it right. The receptacle part in 2:24 of the video is on the burner and attached on mine but the little black box (on 3:34 of your video)that slides into it fell out, though theres nothing wrong with it.

[@AmreSupply]

​@@OceanMetTheSky Thank you for clarifying. The black box is technically called the receptacle, and the silver part is the mounting bracket (which does not make contact with the terminals and just helps hold it all in place) You might notice several tabs on the side of the black receptacle. These will fit into several grooves on the mounting bracket. You might have to use pliers to help bend these back into place if they are loose. If the metal is warped and can't be bent into a way that is secure, then you could buy a new mounting bracket (you wouldn't have to install and wire a new receptacle unless the mounting tabs were of a different shape).

[@OceanMetTheSky]

@@AmreSupply Thank you very much for all the helpful information. It is very appreciated. I received a new stove about 2 months ago from my complex so i dont think anything is warped, i just knocked the black box off the burner when raising up the stove top to clean. I may ask maintenance to take a look at it and reattach it even though your description was very easy. Just to be sure. Thank you again for the detailed help as well as video.

[@dylangregory4313]

Where can you find a full length kit

[@AmreSupply]

Thanks for watching. You can find a full length kit at AMRE www.amresupply.com/catalog/Element-Receptacles-Contacts-632521-AD1H As well you can enter your model number into the lookup tool to help narrow down an exact replacement: www.amresupply.com/lookup

[@g_abdou]

What if it causes a power outage every time I try to turn it on

[@AmreSupply]

Thanks for watching. If turning on the stove trips the breaker, then it could be a loose connection. a weak breaker. something with the oven/stove. In this case it's best to get an electrician to take a closer look.

[@Dimension855]

I have two wires that are same color, idk witch gos were on the terminal

[@AmreSupply]

Thanks for watching. The wires are the same color and it doesn't matter which wire goes to which terminal.

[@i.o1828]

🎉🎉🎉

[@AmreSupply]

Thanks for watching!

[@BRIT14]

The heat plate don’t fit

[@AmreSupply]

Thanks for watching. Do you mean that the stove drip bowl (drip pan) won't fit after installing a new receptacle? Or do you mean that the receptacle mounting bracket isn't fitting properly?