Auto Switching Mini UPS ।। How To Make Router UPS with Zero Delay Switching ।। DIY 12volt WIFI UPS

[@cmsupreme5832]

Nice work. I'll try give this a try.

[@onlineencome8712]

Im watching ur all videos ✅

[@DIYActive]

@@onlineencome8712 ❤️

[@mohitcreative2678]

Fantastic idea bro ❤

[@electric_50k]

Good 👍

[@techraiot]

Bhai Mujhe router ups banana hai with overcharge protection and continuous charging ke sath... ismein konsa konsa module use kru mai....mujhe output 12V 1.5 A tak chaahiye

[@DIYActive]

Aap same to same bana sakte ho,

[@onlineencome8712]

iski out putce 12v ka 1onu 1router calega?

[@DIYActive]

@@onlineencome8712 12 volt 2 amp output hain… so chal jana to cahiye

[@onlineencome8712]

Tp5100 ki jaga aap xl4015module use karte to or acca hota / or 5819 Diod ki jagah sr560 diod use karte to bohot bohot acca hota Long time Lasting hota 🙏

[@educationalandtechnicalcha9425]

My router is of 12V/1.5A. If I run it on 1A or 2A for a long time will my device be damaged?

[@DIYActive]

No no … safe

[@its_me_maniak]

so use in 4007 diode and connect its whitestrapped leg to ups"s out+ and take ups"s out+ with diode"s black side leg and connect with your router it will be safe forever☺

[@mr_bombastics]

This method the battrey keeps discharging along with the adapter power input.

[@jitwarkurhade9712]

Bro is the battery continuously charging or it stops after full?

[@DIYActive]

@@jitwarkurhade9712 overcharge protection ka liye TP5100 hain

[@surendran_t]

how i can modify bro i have 8 battries and i need 12v 3a for jio router kindly give details

[@DIYActive]

1st- make a battery pack of 12 volt (use 3s 10/20 amp BMS) 2nd- for charging and over charge protection use “5A Constant Current / Voltage LED Drives Lithium Battery Charging Module”

[@surendran_t]

@@DIYActive ok bro thanks

[@Mr.mechanomaster]

I have made it on my channel

[@TanjidulAbsar]

Is using diod compulsory?

[@DIYActive]

Yes

[@siyamff999]

vai ma bangladesh sa hu ups full charge pa green indicate kar raha ha jab wifi on ha with electric power

[@DIYActive]

@@siyamff999 hmm

[@siyamff999]

@@DIYActive iska use or total working process pa or ak vedio la au

[@AhmedRaza-he9tg]

Be cup time Kia hai bro

[@DIYActive]

2 to 3 hr

[@AhmedRaza-he9tg]

@@DIYActive 2 cell per

[@DIYActive]

@AhmedRaza-he9tg 1.30hr tak test karna ki bad bhi ups chal raha tha, so i think 2 hr ka backup to aram se mil jayaga.. 1cell 2500mah ka hain, good quality cell hain.

[@theashishnirmal]

Second led kya indicate karne ke liye hai..?

[@DIYActive]

@@theashishnirmal Red for charging & Green for full charge

[@PinkiWandai]

No diagram

[@Sihotang-79]

Sir.. What the function of IN5819 diode on that circuit? Sorry,I was not familiar about electronic too much..