AVB Output Routing with NSB Stageboxes on StudioLive Series III digital mixers

Lee Boylan shows you how to route signal from your StudioLive Series III digital mixer to an NSB stage box!
Learn more about StudioLive Series III here: www.presonus.com/products/Mix...

[@waynebouwmeester2101]

Dude! you don't know how helpful this was. I was trying everything and I didn't realize that I didn't have the output source set. I was thinking AVB Send 1 - 8 WAS the (default) routing and couldn't figure out why the mix I was sending to them wasn't getting through. (smacks forehead)

[@guidokstworshipmusic]

Thank you... Very helpful 👍

[@victorclanda7192]

THANK YOU!

[@robertweston2775]

Good info. It would be nice to see how to set routing for a FOH and monitor mixer (2 mixer) setup. Would like to see how to route FOH L/R to the main FOH outputs... but with the monitor console maintaining control over all monitor mix outputs. I'm not sure this can actually be done... especially with the FOH console only controlling the L/R outputs for FOH; not all 8 outputs it's designed to control.

[@joelandkirsty]

I’m having that same issue

[@ryanmaroney4793]

If you have an ipad, you can connect a wifi router to the main board and just use an ipad to control mixes for each monitor output. Then the main board can handle FOH. You can even assign permissions on the ipad to only control monitor mixes. Or, if each band member has an iphone, they can login to their own monitor mix and control themselves.