B58 DOCRace Turbo Kit Install DIY

Driving sounds: • DOCRace Top Mount Turb...
This video walks you through the installation of a Doc Race Turbo Kit for F-series BMW with the B58 engine.
Turbo kit:
docrace.com/collections/turbo...
Kit Contents:
EFR Turbo
Turbo accessories
- Wastegate Bracket
- Wastegate Arm
- 4x Wastegate mounting nuts/bolts
- Recirc Valve blockoff
- Oil Feed line + fittings
- Oil Drain Hose + fittings
- Coolant feed line + fittings
- Coolant Drain line + fittings
Intake Filter
Doc Race Turbo Manifold
- T4 Gasket
- 4x Studs/nuts
Doc Race Chargepipe
- Upper Chargepipe
- Lower Chargepipe
- Silicone 90° coupler
- Silicone reducer coupler
- 4x Hose Clamps
Doc Race Downpipe
- Heat Wrap
- 1x Vband Clamp
PCV System
- PCV Dump tube
- T-fitting
- PCV Filter
- 4x Hose clamps
OEM Parts you'll need
1x Chargepipe Gasket: 13547563377
1x Turbo Manifold Gasket: 11657643149
7x Turbo Manifold Nuts: 11658670587
1x Oil Line O-Ring (Feed): 11427590576
1x Oil Line O-Ring (Drain): 11427590577
1x Coolant Line O-Ring (Feed & Drain): 11277702625
------------------------------------------------------------------------------------------------------------------------------------
Become a Channel Member by joining my Patreon to get access to perks:
/ kern417
Order your B58 parts through my BimmerNetwork Affiliate Link (Coupon Code "kern417"):
www.bimmernetwork.com/?afmc=k...
Blackvue Affiliate Link: shop.blackvue.com/shop/ref/ke...
Coupon Code (10% off): kern417
MERCHANDISE
T-Shirts: kern417.creator-spring.com
Stickers: $5 each. Email [e-mail]
FOLLOW ME ON MY SOCIAL MEDIA
/ kern417youtube
/ kern417
/ kern417
Support the people that support me! If anything that I post has influenced your buying decision, please let the company know and tag me on social media!
Sponsors:
DOCRace
docrace.com/
/ doc_race
/ docracemanifolds
OdinTuned
/ odintuned
/ odintuned
‪@KiesMotorsports‬
www.kiesmotorsports.com/?aff=28
/ kiesmotorsports
/ kiesmotorsports
Eurocharged Cincinnati
eurocharged.com/
/ eurochargedcincy
/ eurochargedcincy
Blackvue Dash Cameras
shop.blackvue.com/shop/ref/ke...
/ blackvueofficial
/ blackvueofficial
Paradigm Engineering
paradigmengineering.co/?ref=k...
/ paradigm_engineering
/ paradigmengineeringllc
Ross Racing Performance
www.rossrperformance.com/
/ rossrperformance
/ rossrperformance
BimmerNetwork
www.bimmernetwork.com/?afmc=k...
/ bimmernetwork
/ bimmernetworkco

[@kern417]

Driving sounds after installing the turbo: kzbin.info/www/bejne/nnjWapp-naaCmNk

[@ruru2500]

I've been going through your videos and each one is great, keep it up!

[@tumorroww]

your channel should be waaaaay bigger than it is. In love with this turbo!

[@BMWEnjoyer]

Kern. Your videos are so valuable and helpful. Thank you for taking the time to make these. Once I get my 340i I am going to have this video up while I do the job. Thank you, thank you, thank you!

[@BMWEnjoyer]

Question: Would there be any benefit to adding an oil catch can instead of having the PCV vent to the atmosphere? Would it be possible with this kit? I'm sorry if you've already answered this somewhere, I haven't finished watching all of the videos yet.

[@kern417]

It just depends if you're pushing a lot of oil. I'm not but some people have routed that hose to a VTA can.

[@kenbias3523]

Excellent tutorial!

[@jacobmiller624]

Videos are great starting to think I can do this myself. hope to see the tuning and street driving videos soon!!!

[@dedicate2559]

Cant wait!!

[@kern417]

Thanks for the support guys

[@jackdiamondss]

great video

[@hefnerdon7462]

Thanks for build list keep up the content

[@aarondostou3888]

Excellent walk through

[@kern417]

Thank you

[@waqariqbal125]

Wow, Docrace kit should sponsor this.

[@davec5237]

Cool thanks for posting 👍

[@yardkidd87]

Great video bro

[@aslannlannie3376]

Bro your a boss , great work 👌

[@kern417]

Thanks so much

[@F60Stunt]

Bro got the most underrated chanel

[@kern417]

🙏🏾

[@ProcTech]

Goals! Thx

[@seanmarrero3461]

This is great!

[@anthonyh958]

Superb sir

[@LivinWith3M]

Awesome video and channel. New subscriber here!

[@JO3KAH]

You deserve way more subs. Keep it up buddy.

[@kern417]

Thanks a lot for that

[@mphRagnarok]

You do some amazing camera work in really really tricky spots and angles. It's like you have a third arm. Bravo sir

[@kern417]

Lol just the power of a cell phone. Thanks

[@mphRagnarok]

@@kern417 seriously so many people have no idea what's actually in frame or in focus on their phone camera. Most often they just point vaguely and uselessly and don't move the camera at all

[@ianbehm4837]

Awesome!

[@Pitchplus8]

Nice video bro. Pls make a power measurement and a 100 - 200 kmh video. Greetings from germany.

[@kern417]

Absolutely

[@ravneetsingh8612]

Damn that TURBO came with a whole ass engine LOL

[@_luckii]

Legend 💯

[@Idke92]

Hey started watching ur videos love how detailed you are about what you’re talking about I’m looking into getting a 340i just not sure which year I should go with and what I should consider when getting one ? I had a 335i n54 fbo and loved it but it was a money pit always putting new parts don’t want the same problem Would like to hear what u think I should go with ?

[@kern417]

I recommend 2017-2019

[@trevorjelam]

💪💪

[@dantem306]

Easiest sub ever, I just got my 340i

[@kern417]

Thanks a lot man

[@dantem306]

kern417 followed on IG too, BodaciousB58

[@rhodybimmers8094]

Make sure you wrap your downpipe with heat wrap

[@kern417]

Yep i was rushing and completely forgot haha

[@MrTheonly1one]

Gradz car goals! More vids tunes dyno races in Mexico And are you daily driving?

[@kern417]

I do in the good weather but it's parked in winter

[@Antimatter.]

Nice job on the Tutorial 👍, Why didn’t you install the waste gate actuator on the bracket first so you can install all 4 bolts , then install the bracket to the turbo , leaving bolts out is not cool

[@kern417]

Unfortunately the 2nd 2 bolts didn't fit with the welds that were in place. The 1st 2 still hold it in securely.

[@Antimatter.]

@@kern417 Gotcha 👍Thanks

[@kosditrade]

Hi kern! Your video is very helpful. I saw in your video that your PCV outlet and EVAP vent out in open air. But now you don't get a vacuum leak? Or these two vents are only outlet when crankcase is positive? When crankcase is negative it will not suck air back into these 2 outlets? (it has check valves?) Many thanks to explain!

[@kern417]

Yes it has a check valve

[@kosditrade]

@@kern417 oké, then it is clear, than you!

[@Ghostinthe90s]

Hey man question used your video to install a doc racing turbo kit to a a90. How would you go about checking for a boost leak? If I run a smoke machine where would you check? Thanks

[@kern417]

Remove the intake and attach it to the turbo then pressurize the system

[@twinb5840]

I wish doc racing still made this kit instead of ditching the Borg-Warner

[@kern417]

Me too but EFRs were always back-ordered

[@ChrisDavis333]

What else do you need for a righ like this? Do you have to build the trans? Outside of the turbo and the manifold, what upgrades are required?

[@todddooley793]

Does a xdrive setup create a much harder instal? I know it does on the n55 but not sure about the m240 b58.

[@kern417]

No it does not

[@ItsTheBlkStar]

Is the coolant and oil feed locations on the block the same for n55?

[@NikkoCruz1]

Did that crank case hose and filter come with the kit or did you get that separate?

[@kern417]

came with it

[@melvinkimble7709]

You need to put those other two screws in your waste gate actuator it has play

[@kern417]

I will when i find more motivation but there are several guys running without them

[@kern417]

Oh and the movement you see is the wastegate bracket not the screws. It's flexing from the wastegate finding its end stops

[@harjassingh9357]

Yo kern, what happens to the CAI after you install a top mount turbo kit, where is it placed?

[@JohnUnnever]

Do you still recommend this turbo kit for the B58 ? I have an a90 supra and i'm considering top mount options as well as hybrid turbo options. Does the kit come with everything needed or are there any supplemental parts required to gather outside of the kit?

[@kern417]

Yes i think it's worth it. There are new precision Options

[@bhaskarakovvuri707]

What size is the T fitting? For the EVap currently doing the install and struck there haha

[@killagiant907]

What's your power goals for the car? I recently purchased a 2017 340 xdrive and I like the idea of the top mount setup. What should be my first purchase? I currently have the MPPSK exhaust from BMW

[@kern417]

550-600 for now. Your first purchase should be a tune

[@killagiant907]

@@kern417 I have a MHD but haven't installed it yet. Was looking to get a downpipe so I can go straight to stage 2. What's your thoughts?

[@kern417]

@@killagiant907 stage 1 is great. Stage 2 with a downpipe will be very loud with your exhaust so be prepared for that. If you have ethanol available then the perfect combo is downpipe+hpfp and do stage 2+ e30

[@killagiant907]

Thanks @@kern417!

[@dylanxyap2.0]

would this be the same install process on the A90 Supra? there's no other detailed videos like this on KZbin

[@kern417]

For the most part the same. The pcv vent setup is slightly different but you can figure it out from this video

[@Ghostinthe90s]

I’m using this video to install my doc racing turbo kit on my A90. Great question Dylan

[@dylanxyap2.0]

@@Ghostinthe90s update video when it’s all complete?

[@KingDiamondBones]

@@Ghostinthe90s how much Hp can the doc turbo give

[@j.f.4765]

Bro, when you do mechanical and electronic waterpump bleed. Do you keep both cap off? Cheers

[@kern417]

I did

[@carlsagan3065]

Air needs to escape

[@nazeermohamed-gm8bw]

Good day kern just fitted my hybrid turbo and When I press the ignition button it closes and opens but after starting it stays open which I know is for cold start once cold start is complete ,it then remains open and no boost because the wastegate stays opened any advice

[@kern417]

Not sure i understand your issue but the first step is always scan for codes.

[@alanle249]

Do you let the car run or just turn the ignition to ON when running the ista software?

[@kern417]

I just turn on the ignition in accessory mode. I actually haven't used it with the car running but I believe it works as well

[@AmoDiaLZ]

For the 340i, is this do-able? Can you do this on a 340i? What would you need to do on the car if not?

[@kern417]

Yes

[@Thatslow340]

My computer wont support ista+ but I’ve spent hours trying to get it in range, it keeps closing/opening, but won’t close again.. any tips?

[@kern417]

Try this kzbin.info/www/bejne/eHivfYJtfpyFfNU

[@chuggalueroifan]

Can you do a video on how to install the Ista+ on a computer

[@kern417]

I'll see what I can do

[@oneofm3409]

Nice video. Can you run stock map on it?

[@kern417]

Yes but I'd always recommend a custom tune

[@oneofm3409]

@@kern417 are u gonna use turbo blanket?

[@kern417]

Yes and wrap the exhaust as well. I was so excited to get everything on I forgot to show it in the video

[@RWattz24]

Hey what’s the link for the bmw insta software

[@kosditrade]

Hi kern! Can you run your set without any tune? (+airflow sensor) Just for short testing if everything is oké. Or i have changes to make damage to engine? Many thanks for your answer.

[@kern417]

Theoretically yes but I never tried

[@kosditrade]

@@kern417 Thank you!

[@Thatslow340]

Hey, what are the manifold nut torque specs or recommendations? I keep blowing the gasket every 4 months for the past 2 years with the doc race kit

[@kern417]

i used stock, but i learned it's important to double check torque after the gasket relaxes. So tighten it, wait a bit, then torque again.

[@Thatslow340]

@@kern417 will definitely try that, appreciate it

[@xxthehuskycaboosexx]

Do you still have the cast manifold? Or have you gone tubular?

[@kern417]

it's a tubular manifold

[@yonnyeilat9541]

what size did you get? i checked their website and they have 700whp-900whp sizes

[@kern417]

8374

[@michaelgranville1733]

Who makes that air filter on turbo? Would work perfect for what im doing. Thanks.

[@kern417]

DOCRace

[@brianlopez6374]

do you need to change the gaskets if your reinstalling the same turbo

[@kern417]

highly recommended

[@sambrown8359]

How are you supposed to take the filter out to clean?

[@kern417]

Unbolt the turbo and lift it up

[@dtpman776]

does the calibration work with the a90 as well since they use the same engine and all? Doing a turbo install soon

[@kern417]

Yes it should. All the engine electronics are BMW

[@dtpman776]

@@kern417 okay, so I can use the same software as well with my ecu ? Thank you again for replying

[@kern417]

@@dtpman776 yeah look up ISTA on the bimmerfest coding forums. You can also do it the trial and error way

[@dtpman776]

@@kern417 AWESOME!! ill try to use the software first and if it fails ill do the trial and error way. Amazing video as well

[@dtpman776]

Could you link the ENET Cable that you used?

[@Rabbit.Hole.Racing.]

does this kit fit the b58 found in the 2022 m240i?

[@kern417]

DOCRace makes a kit for it

[@bmwsincekid]

Thanks for The Video !! Where can i download ista from ???

[@kern417]

Search online. I found download links on a bmw forum

[@bmwsincekid]

@@kern417 thanks ..

[@hifam6451]

So um, this looks easier than the n54, as in...a lot easier. Is it?

[@kern417]

Your eyes do not deceive you

[@BigBlueRacing]

What program are you using to calibrate the waste gate

[@kern417]

ISTA

[@luisvargas4577]

@@kern417 what version of ISTA do you have?

[@marqdre6529]

Did you change your studs?

[@kern417]

I ended up adding 7 studs to the bottom, that's it

[@yardkidd87]

What did u make on pump gas?

[@kern417]

Never got to dyno unfortunately. I estimate around 520-530

[@llkjjjss]

Comment for the algorithm

[@kietnguyen08]

So no intercooler need ?

[@kern417]

No

[@Track.340i]

Could you explain me step by step how the bleeding works for the coolant didn’t quite get it sorry

[@kern417]

Press the start stop button three times (Should end with the car on but the engine not running) Turn the fan on the lowest speed with the highest temp for the gas pedal for 15 seconds until you hear the electronic water pump start running Turn on the engine Stay in park and hold the throttle at around 3500 RPM for about 10 seconds. Then let it go back to idle Do that 10 times to bleed the mechanical pump Top off your coolant levels as needed

[@beamerandthebeast3979]

Wow... this is easier than n54...

[@kern417]

Absolutely

[@silver_n5442]

Damn, its that simple to change the turbo on the b58!?!? This is a breeze compared to when I upgraded twins on my n54 😂

[@kern417]

It's awesome. The engine is great but being so easy to work on makes it a winner

[@silver_n5442]

@@kern417 Will definitely be getting a car with b58 in the future once they're a bit older/cheaper.

[@kern417]

You won't regret it

[@overlordtype25]

Hey this engine looks exactly what’s under my supra weird🤔

[@kern417]

🤔🤯

[@nightfallm4981]

I just watch to hear your voice

[@kern417]

Dawww shucks

[@robertlawson1184]

just pull fuel relay