Landcruiser 200 DIY Major Service : Engine Oil, Diffs, Fuel, Transfer case | Save big $$$

Learn how to change your engine oil and filer, fuel filter, front and rear diff oils and your transfer case oils! I show how easy it is to do this at home with some basic tools, and potentially save you thousands by doing it yourself.
Merch:
www.offroadcrusader.bigcartel.com
Facebook:
offroadcrusader
Instagram:
offroad_crusader
Patreon:
www.patreon.com/offroadcrusader
Join this channel to get access to perks:
/ @offroadcrusader

[@lappingozoffgrid]

Heya, just to point out on transfer oil. You can use GL-5 75w-85 same with rear diff and front. Toyota specifically asked for GL5 75w-90 on earlier models 07-10. However this changed on 2011 onwards. This information is directly from Toyota and Penrite Oils. It’s definitely easier using same oil for all three. Hope that helps.

[@turystycznie4x4]

Good job and thanks for the instructions! Greetings from Poland!

[@johnstaring3210]

Great video. Always done most of this myself because experience tells me that dealers just can't be trusted.

[@offroadcrusader]

Always great skill to know! Thanks for the feedback John, really appreciate it!

[@dilipsadventures2234]

The most important part of this video is that you wore a “WA Prado 4x4” shirt… you have stayed true to your routes! 😏 Thanks for the tips, will give it a go on my cruiser.

[@offroadcrusader]

That shirt has seen more than its fair share of oil, grease, mud and sweat, trust me :P Cheers mate!

[@jarrodau2134]

This is great work. I learnt a lot from this as I've always used the dealer. Cost $950 for the 200,000km major at Toyota

[@offroadcrusader]

Perfect! Glad you found it useful mate!

[@gtb4]

Top video...Thank you for sharing. 😊

[@michaelcarydakis790]

ryco is the best i tested all types and it wins no bias k&n second

[@zoezoe610]

I ended up cutting a hatch where the filter is and a bit of plate back over it with tech screws. Heaps better.

[@offroadcrusader]

Now there's an idea!

[@zoezoe610]

@@offroadcrusader Do it just makes the job easy.

[@bertfromnz9069]

yea mate you forgot to grease the drive shaft unis

[@JamesFalzon]

Thanks for the video effort. ??? Shouldn't there have been a circlip on the 200 oilfilter? Also can you update the 200 plastic oilfilter cover with the 79' alloy cover on V8? Thanks

[@offroadcrusader]

Thanks mate. Nah no circlip on the filter element, it just clicks in over a knurling in the housing. The alloy filter cover would definitely be a good upgrade, I'll look into it

[@martingraham3559]

Great stuff mate, have you done a transmission fluid change?

[@offroadcrusader]

Hey mate, no not yet. The car has only done 127,000kms so it's not a high priority, but I do want to get it done mostly for piece of mind and to see what improvement it offers. I will definitely film it and upload it when I do though. Cheers!

[@maxgermasi3302]

How long did it take you to complete all the task? Thanks, great very helpful video!

[@offroadcrusader]

Thanks for watching! I would allow 2-3 hours for the job now, but give yourself half a day if you haven't done it before.

[@m1ci]

Amazing, thanks for the tips! btw IMO you have missed two things: chassis lubrication and cabin filter. Im sure you're aware of it but for the audience matters it is good to mention.

[@offroadcrusader]

Thanks! Chassis lube, do you mean greasing the uni joints? Cabin filter is important but wasn't required this time. I'll do a video about it later this year.

[@m1ci]

@@offroadcrusader yup, I meant propeller shafts (Spider+Slide yoke). Easy job but at the same time important. Anyways, thanks for the great content!

[@fishernick2447]

Couldn’t you leave the fuel filter housing in place, removing the filter and replace then removing on If there’s too much gunk in then clean properly

[@offroadcrusader]

Yeah for sure, you definitely could. It's only 2x bolts to remove it completely though and for the video it's a lot easier filming on a workbench.

[@fishernick2447]

@@offroadcrusader …. Ah yes got you, can’t see FA and a very limited instruction video too. What’s your thought on catch cans ?

[@treebs9516]

What do you use to grease your door hinges? My doors sound like there are rubbing when opening and closing

[@offroadcrusader]

Believe it or not, I use bike chain lubricant haha

[@keimolantio]

Always open the filler hole first. What happens if that does not open or brakes😅

[@offroadcrusader]

Very true!

[@jerinjames3001]

Any tips on how to protect LC electrical when doing river crossing? 2:19

[@offroadcrusader]

Using a water repellant spray or non-polar substance such as CRC or WD-40 over important electrical connections really helps. Dielectric grease in the plugs themselves helps a lot too, so water can't get in. Best thing is to keep the engine running to keep warm air circulating under the bonnet, which will help dry things out sooner and move water out of crevices.

[@lappingozoffgrid]

I use inox mx3 on electrical components to give them bit of barrier.

[@CaptainRedBeardarrr]

Best thing is to sell it. No transmission oil change? The most overlooked thing.

[@offroadcrusader]

Transmission oil change deserves a video all on its own, as the process on these cars requires more knowhow than I would like to squeeze into this video. It's definitely on the list of videos to make this year, so keep an eye out!

[@johnstaring3210]

Because my cruiser is essentially a tractor (for my caravan) I have the trans fluids changed every 40K km. 250K+ km already and Transmission as good as new.

[@michaelcarydakis790]

those oil filter caps and metal tube should be thrown out and buy a new one as the pipe falls out then filter compacts and starves the engine it's highly recommended by diesel engineers

[@andremeerbeek4962]

i hope you did use car stands before you went under the car.you cant trust a car jack. safety first

[@offroadcrusader]

Hi mate, yes I do. I use the jack stands as well as the trolley jack as a safeguard.

[@shaggss]

Mate, great vid thank you!!

[@offroadcrusader]

Glad you liked it!