BEST CAB MOUNT RELOCATION KIT

In this video I'm relocated my cab mounts using DRT's cab mount kit in order to fit 35'' tires and stop all the rubbing.
Timestamps:
00:00 Want 35" tires? Install 3RD GEN TACOMA CAB MOUNT RELOCATION
00:20 Parts List
01:45 Taking Measurements
02:33 Remove Door Jam Trim
03:40 Jacking Up The Truck
04:20 Removing Factory Cab Mount
05:11 Using Metal Grinder
07:43 Explaining Cab Mount Install
12:47 Welding of Cab Mount Kit Passenger side
13:32 Painting Cab Mount Passenger side
14:00 Installing/Welding of Driver side
14:30 Who Weld it better Poll
16:10 Conclusion
Tools and equipment used:
jack stands 6 ton amzn.to/3Cz8iZ5
face shield amzn.to/3bomB8a
metal cut off wheel amzn.to/3vCTyVs
acetone amzn.to/3bnIYL9
flap disc amzn.to/3oNMrFB
angle grinder amzn.to/3PXpwDJ
cold chisel set amzn.to/3Smzv7u
Mig or Tig Welder amzn.to/3quHhPM
Pliers amzn.to/3xhLbzk
Channel Locks amzn.to/3DkKUPY
torque wrench amzn.to/3rytbO4
breaker bar amzn.to/3ecyqj5
..........My 3rd Gen 2018 Tacoma Build..........
Shocks front and rear Bilstein 5100 set at 2.5”
Heavy duty coils (front) Old Man Emu
Leaf Springs Heavy Duty Old Man Emu
Front Bumper C4 Hybrid with full bull bars
2016+ Tacoma Rear HC Tube Bumper
Morimoto XB LED Amber
Roam Adventure Awning 6.5’
Prinsu quick release awning mounts
2016-2022 Toyota Grille w/TSS with amber raptor lights
Total Chaos UCA with urethane bushings
2016-2022 Tacoma rear channel bed stiffners
Baja Design Squadron Pro driving combo
Baja Design Squadron Pro Sport Pair
C4 Rock Sliders Access Cab with Step Plates
Extreme LED Bar X6S 30’’
Tacoma Mid Height Bed Rack 3rd Gen
DRT Cab Mount Relocation Kit w/red Bushing
Yokohama GeolandarM/T 35/12.50
RRW Wheels
ARB Twin Compressor
Speedflate 4 way hose
Prinsu Rack
.
.
.
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites
Disclaimer of liability:
Neither YotaKing Investment LLC nor any of its employees shall be held liable for any improper or incorrect use of the information described and/ or contained herein, and YotaKing investment assumes no responsibility for others use of the information. In no event shall YOTAKING Investment LLC or its employees be liable for any damages including but not limited to direct, indirect, special or consequential damages arising out of resulting from or in any way connected to the use of the information contain in these videos, whether or not based upon warranty contract tort or otherwise and whether or not injury was sustained by persons or property. Working on vehicles present inherent risk and hazards and the content contains herein is not intended in anyway to be a substitute for instruction from a certified mechanic or body shop. Always seek the advice and supervision of a certified mechanic or body shop before attempting any of the activities techniques or skills described herein

[@glocostacos9883]

This is the most underrated cab mount relocation tutorial. Definitely subscribed 🤘🏽

[@eluv201]

Thanks 🤙🏼

[@kevinharel3007]

Best tutorial I've seen for the cab chop! Little details here and there that makes us avoid some hustle, wast of time to do it the ring way the first time! Now I feel more comfortable to do it my self! Thank you so much man!

[@eluv201]

Thanks man, glad I could help 🤙🏼

[@randyg35]

Wow, a hard job made look easy.

[@neftalirivera]

Compadre, usted es un General en esa materia!!! Saludos!

[@eluv201]

Gracias brother 🫡

[@kirkleaman6863]

Looks good nice job!

[@eluv201]

Thanks I appreciate it ✌️

[@serendipityguy]

Great video and nice content, thank you so much for making this video. 👌How many hours did this job take from start to finish?

[@eluv201]

Thanks, without me video’n 10-12hrs

[@ericx4124]

Welding jorts too!

[@eluv201]

ya, comrade Serge be straight trip'n.

[@dundeeecroc]

Great Job, passenger side is better. why not use black urethane bushings instead of red?

[@eluv201]

😂 Ya Serge is a bit more polished because of his job. On color of bushing it just my preference. I feel like it draws the eyes to that spot. Both are good picks though.

[@dundeeecroc]

@@eluv201 Reason why I mentioned the color, is that in some states when the truck is inspected, it may not pass State Inspection? draws attention to the mod by it's color?

[@phxamigo]

Have you noticed any harshness, vibration or noise in the ride since the modification? thanks

[@eluv201]

No… I’d be concerned for sure. Any major changes besides the CMR? If not I’d call them up and tell them your issue. Maybe they can give you some insight.

[@guyjones1624]

What kind of paint do you use to coat it after welding. Just spray paint?

[@eluv201]

Great question, since this video I’ve learned a few things about cutting anything that can possibly rust. This is another spray you’d need after spray paint. Use this over the spray paint 3M Professional Grade Rubberized Undercoating, Corrosion, Water and Salt Spray Resistant, 03584, 16 oz. Aerosol

[@donotedit4646]

Question!!! I have a couple body mounts that are extremely rusted. I plan on making my own body mount brackets in the shop. Are the bushings that you used the same size as the oem bushings? Or at least close? I’m hoping I can buy the bushings individually.

[@eluv201]

No the old ones are not compatible You can buy them individually.

[@donotedit4646]

@@eluv201 oh okay, awesome. What website did you get yours from?

[@eluv201]

@@donotedit4646 on www.drt-fabrication.com

[@bobbyurbina4488]

i have these mounts they make loud poping noises is this normal?

[@eluv201]

No they shouldn't .. Do you know which side or is it both? Make sure everything is tight and torqued to spec.if you did it yourself go over everything you took apart to see if something was missed. If everything seems right and still makes noise and you know for sure its coming from your new cab mounts contact DRT and tell them your issue and they might be able to assist or send a replacement for those bushings.

[@ryancohick1313]

Right side is way better

[@eluv201]

😂

[@motodude23]

What about the 2-3 inches of up travel you lost because your big ole tire are gonna hit the fenders and end up ruining your front core support, even my 33"s destroyed my core support after offroading

[@eluv201]

Great question, check out this video for the mod that would correct that. kzbin.info/www/bejne/jaeZZGidbd2dpJYsi=h9mNhARkB1pK9w8J

[@eluv201]

Then check out this video. It’s a must kzbin.info/www/bejne/jaeZZGidbd2dpJYsi=tccrUOerCN5yWbZU

[@twotwentyswift]

When you change tire sizes you need to change your bumpstop size and make sure your wheels have the correct offset. My 33's don't come close to my core support.

[@motodude23]

@@twotwentyswift tubbed the fenders rather than lose travel 🤣

[@twotwentyswift]

@@motodude23 How did you tub your radiator? 🤣🤣🤣