Best Tips for How to Drive the Nissan 350Z / Infiniti G35 (manual transmission) | AnthonyJ350

We go over the basics when it comes to driving the Nissan 350Z. We cover everything from how you should start it to tricks to shifting the vehicle.
Some people think they might think all manual transmission vehicles are the same but there are a couple differences with the way the 350Z drives that need to be known to drive it correctly.
#Nissan #350Z #DrivingTips
Subscribe for more automative tips!: bit.ly/sub2anthonyJ350
Watch my most popular uploads!: bit.ly/anthonyJ350howto
Website: gofasthavefun.ca
Instagram: / anthonyj350
Twitter: / anthonyj350
Facebook: / aj350
Shop: www.amazon.com/shop/anthonyj350
Music available - www.jinglepunks.com & www.epidemicsound.com
About AnthonyJ350
I am a Mobile Electronics Certified Professional 12 Volt Installer (MECP Certified), Business Management Graduate (KPU), with a Professional Driver's License and a genuine automotive enthusiast who loves working on vehicles and I want to share my experiences with you. The goal is to help other people who can hopefully learn from my unique outlook towards vehicles, experiences and working practices.
Please feel free to ask questions or give feedback either in the comments or e-mail me.
New videos every week.
Please check out official web site (www.gofasthavefun.ca) for our disclaimer as we are not professional mechanics but experienced automotive enthusiasts sharing our experiences and providing entertainment content.
Go Fast Have Fun provides the content in this video, for information and entertainment purposes only.
The information in this Video presents guidelines to help vehicle enthusiasts modify or repair their vehicles and to demonstrate what car culture is all about. Go Fast Have Fun make no representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability, suitability or availability with respect to the Video or the information, products, services, or related graphics contained on the Video for any purpose. Any reliance you place on such information is therefore strictly at your own risk. Nothing presented should be relied upon you for your modification or repair plans for your vehicle and is not in any way professional mechanical advice.
Go Fast Have Fun strongly recommends you consult with a professional automobile mechanic to ensure that any modification or repair plans for your vehicle are appropriate for your vehicle.
In no event will we be liable for any loss or damage including without limitation, indirect or consequential loss or damage, or any loss or damage whatsoever arising from loss of data or profits arising out of, or in connection with, the use of this Video and the information presented within it.
Go Fast have Fun
Canada
Best Tips for How to Drive the Nissan 350Z / Infiniti G35 (manual transmission) | AnthonyJ350
• Best Tips for How to D...
ANTHONYJ350
/ anthonyj350

[@nagyba]

Wow someone actually knows how to warm up an engine. I would buy car from you - great owner!

[@AnthonyJ350]

Haha thanks! I think a lot of people would appreciate the things done to this car and the way it's taken care of.

[@JohnWick-no8oz]

People dont do that??????!!!!???

[@hypherclan1598]

yeah but he cant actually say z right?

[@rys8736]

This might be my first manual car. Sounds so good in manual 😭.

[@AnthonyJ350]

Indeed it does!

[@rigotomas1215]

You just hit every problem I've had driving my Z. Now I finally have some answers thanks bro

[@AnthonyJ350]

I'm glad you liked the suggestions! You just have to and practice. The RJM pedal seems to help people the most. kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@welchsgrape696]

a tip for heel-toe: make sure your right heel is resting on the floor and is aligned with the accelerator. in order to brake, tilt your foot to the left and brake with the ball of your foot. in order to rev match, simply swing your right knee to the right. the action removes any possible braking error caused by trying to stretch your foot over to the accelerator. you're taking advantage of the fulcrum between the brake pedal and the ball of your foot, allowing for easy throttle blip without unwanted brake pedal articulation. in this way, you don't have to try to do two things at once with your right foot; just focus on applying the right braking pressure, and the knee action will manage the throttle. you can heel-toe down to second at as low as 20-25mph. you don't need to be braking hard in order to heel-toe.

[@AnthonyJ350]

Great explanation!

[@johnwethekylow]

Thanks for the explanation. I kinda get it but i'm better at learning by seeing it done, so hopefully anthony will do another high quality Z vid for us.

[@just_a5.7]

fuck that im getting an auto.

[@rys8736]

Jets Set 5.0 lmfao, auto has triptonic so it’s like a manual too, that’s what I drive in and it’s really fun, it simulates driving a manual, no clutch or anything lol it’s also good practice for actually driving an actual manual too

[@XH1927]

@@just_a5.7 You are the cancer killing cars

[@MrCaptainTea]

Just got my 08 HR 6 spd and your whole series is so good! You cover everything and are thorough in your explanations. Thank you.

[@AnthonyJ350]

So glad to hear you're liking the videos! I have a large playlist dedicated to these cars you can check out on my channel.

[@cheyennekyle99]

Have owned a G35 for almost a year and I’m pretty comfortable driving but I learned so much from this and this video is so underrated. I’ve been enjoying your channel as you seem very knowledgeable even though you’ve only had the car for 2 years. This video has gave me so many tips and I appreciate the effort of putting out tips and info to others! Great video man!

[@AnthonyJ350]

Richgoldman9 Thanks so much! It's nice to hear when a video helps someone. How's driving the car after watching this?

[@ratking948]

Having had a 350 and now a G35 I can relate to this video so well. A quirky but amazing car.

[@AnthonyJ350]

Thanks for sharing your experience!

[@MiaBlossomTV]

These were great. Ive had my 03 350z for 2 weeks and today i felt sooo much more comfortable. Drove on the highway and in a busy traffic main road. These tips were good. Thank you!!! I love 350 so much!

[@AnthonyJ350]

Glad you like them!

[@blockobutter]

Just got a G, now bingewatching his vids for tips and it definitely has helped.

[@AnthonyJ350]

Glad you're liking the videos!

[@ThatCampingOwl]

Great videos man, thanks for the awesome and informative content! May your tank always be full, sir.

[@AnthonyJ350]

ThatCampingOwl Thank you!

[@djphatnutzinc]

I've owned my 08 350z from New off the show room floor. I know this is an old video, but you definitely cover all the nuances I forgot on week 1 from 12 years ago. Good stuff

[@AnthonyJ350]

Thanks for watching!

[@AnthonyJ350]

Have you looked into the RJM Performance clutch pedal assembly? It's a different car after.

[@SilkCityOG]

Z Nation!!!!!!!!!!!

[@AnthonyJ350]

Which video did you ask me about my wheels? Here's the video kzbin.info/www/bejne/rmq7fXp3pM-qbNk But please spare the idle threats. Not a nice way to treat people.

[@AnthonyJ350]

I just looked it up I responded to you comment 6 days ago in the window video.

[@SilkCityOG]

AnthonyJ350 no wasn't this one. I think it was the window video

[@ceciliaageofaquarius1225]

Yup yup, Z33 baby. 😎

[@mikekremer2053]

Just purchased an 05 350Z roadster! Metallic yellow!!! 45k kilometers on it. Just absolutely love it!!!

[@AnthonyJ350]

Nice! That's really low mileage

[@musiccylinderK6]

Hi Anthony, these are some really good tips for many. I'm new to your videos and I'm glad to find you truly care about your car and know about it. Good advice on driving position, how to properly warm up the engine (drive the car, slowly, don't just let it sit forever, plus it's good to get some heat and motion into the gearbox & differential fluids before driving the car harder!), not riding the clutch, etc. I know this is an old video, but I'd like to add something that is manual transmission specific. In the beginning of the video you can be seen resting your hand on the gear lever as you drive: this is, in general, not good practice. Similarly to resting your foot on the clutch, it is very easy to unwillingly apply some pressure to the selector forks and prematurely wear out the collars. It might look/feel cool to drive like that, but it isn't recommended. All the best and thanks for these videos! I'd like to get myself a used 350 or 370 at some point, but I really need to see if I can afford the pricey insurance for them in my country in the coming years.

[@AnthonyJ350]

Thanks for watching our videos, Im glad to hear you get value from them. And good tip with the shifter. Stay safe out there!

[@musiccylinderK6]

@@AnthonyJ350 Thank you, likewise! Also, congratulations for being so present and engaging with your viewers!

[@AnthonyJ350]

@@musiccylinderK6 Thanks for noticing! I actually missed a bunch of comments so I'm taking the time to reply to old comments.

[@Wizegui]

I've been driving my G for a couple months now, and I have developed identical habits when it comes to warming up, shifting, etc. I find that when you try to rush a shift, the shift action doesn't seem to be very fluid. If you time your cluck engagement and shift correctly, it feels very fluid. Definitely not the easiest car to learn stick on, but lots of fun when everything clicks. Great video!

[@georgenino9011]

Wizegui this make sense. When i take my time to shift i can shift smoothly. When rushed, i usually mess up

[@AnthonyJ350]

Thanks for sharing your experience!

[@ansonkeller2921]

Thanks for the video. I have had my 03 for only 2 weeks and I have noticed almost all the issues you hit on. My last sports car was a 99 Miata and you definitely can’t redline this car and get the shift like a Miata. This one takes more finesse.

[@AnthonyJ350]

Glad the video helped!

[@texascyclone89]

This was the car i learned to drive a manual in a 05....it was hard getting use to the clutch at frist but once a got it had so much fun driving this car.

[@AnthonyJ350]

Nice!

[@themechanix2311]

Here’s a really useful tip for people who just get a 350z and any car with a Manual Always and I mean always shift at redline Never ever before

[@mohamedhussein5190]

The Mechanix reasoning?

[@rys8736]

Mohamed Hussein he’s joking you don’t have to do , it just makes the car sound/go faster 😂✌️but I agree with him

[@mohamedhussein5190]

リバティーウォーク ok😂I thought maybe the car doesn’t like shifting before redline at full throttle or something

[@AnthonyJ350]

Good advice if you want a new engine :P

[@mr.mopedmadness3441]

Hahaha you paying for my speeding ticket? Haha I can hit 98mph in 3rd gear 😂😂

[@Samualninja]

Opened my eyes to priming the fuel pump! O_O There's been times that I did it without noticing but normally I did just crank it....

[@AnthonyJ350]

Samualninja It's all about the little things right

[@taylon5200]

Nice song choice on the radio in the first minute, that song always gets me stomping the gas and feeling badass lmao.

[@AnthonyJ350]

Right on lol! 😆

[@greenaruba1]

very good tutorial!

[@AnthonyJ350]

Thank you!

[@blackwork90]

agree with all these points...nice video

[@AnthonyJ350]

André John Thanks!

[@daverunner3397]

Sounds alot better than my 83 280 ZX. Loved that car though.

[@cheppe6493]

Nice video! i love my Z

[@AnthonyJ350]

Thanks!

[@johnwethekylow]

Lovin all the Z videos. We already have similar driving habits. But i will try the clutch-in while turning off bc i hear that noise too, but didn't think of how to change it. Every little tip helps. And yeah sure, make a heel-toe vid for dummies bc i'm not real good at it. Literally the heel toe part, as in what your feet are doing, rev-matching and clean shifting is half the fun you can get on the road (legally). I love driving my Z, it's my daily AND my fun car! Keep it up!

[@AnthonyJ350]

Thanks! Ya I'll have to figure out a good way to show my feet and get my point across for the heel and toe video. I'm editing a "5 things I like" and "5 things I dislike" videos right now about the 350Z. Hopefully you guys like it.

[@johnwethekylow]

Uh, shove yer camera under there when you're doing some spirited driving and voice over afterwards? or just shout down to it if you don't have all that equipment, we'll figure it out, ha. Looking forward to the love/hate list, i know we could all do one, i bet they'll all have some of the same things.

[@surpluscollector1654]

love the old skools

[@AnthonyJ350]

Thanks!

[@SpencerLowe-kg4rg]

I've always wanted this car since I was 11 years old in 2009. Now that I'm 25 in 2023. This is still my favourite Z generation.

[@AnthonyJ350]

That's awesome! Should be able to still find one for a decent price.

[@SpencerLowe-kg4rg]

@@AnthonyJ350 one day in this decade these are gonna soar in value.

[@AnthonyJ350]

@@SpencerLowe-kg4rg I think so, they're pretty durable and doing motor swaps like LS engines is easier now. And the styling still looks good.

[@SpencerLowe-kg4rg]

@@AnthonyJ350 it's in the category of timeless original designs.

[@st.germainmedia5797]

Honestly very helpful after the 14 minute mark. I've owned my Z for about 6 months and went through everything you described. I'm not perfect and totally thought I was the only one that struggled with this at first, though I had been driving stick for years.

[@AnthonyJ350]

St.Germain Media Ya it's just off by enough to make you think you don't know how to drive that well lol

[@georgenino9011]

Same here. Drove my 6 speed G35 for a year and it was very easy to drive. My 08 350z feels a bit harder to shift smoothly. Both had oem clutch. Now i can drive my z better but taking off from a stop sometimes i mess up

[@bijan1982]

mate, from australia. thank you. finally a real video.

[@AnthonyJ350]

bijan1982 Glad you liked it :)

[@rustybui739]

This video was rad I couldn't get enough tips! Please do the how to for the heal toe. Btw I got a Greddy magnetic plug for my oil pan, thanks for the plug! Lol

[@AnthonyJ350]

Nice! I'm glad you liked this one. Also did you look into the Filtermag for the oil filter? kzbin.info/www/bejne/gpbGkKyhhc2JbqM

[@static_Tricolor_camry]

I can confirm that your 350z is the same like my 2010 Corolla XRS when I do Heel Toe at a dead stop I'm able to accelerate smoother at the end when the clutch pedal is almost all the way up if I accelerate with the clutch pedal still half way down my car will be jerky also if I'm upshifting at 3,000rpm my shift isn't that smooth compare to when I upshift at 2,700-2,800rpm and I shift slow rather then fast it's smooth so you are right and every manual car is different with my Accord I can shift with the clutch half way up in my Corolla XRS I have to shift when the clutch is almost all the way up that's basically the sweet spot for a smoother shift from a dead stop I actually thought it was me not driving manual right but now that you mentioned a few things in this video I go through these same issues

[@AnthonyJ350]

Gravecb7 Accord That's really interesting, thanks for sharing your experience :)

[@BluhmGardens]

Just a tip, the protrusions on the upper half of the steering wheel are where you are suppose to grab the wheel. That's why they are located at 10 and 2, because that has always been the proper hand positioning for driving all vehicles. Surprisingly the Z's are so well engineered that that is by far the most comfortable position to drive the cars.

[@AnthonyJ350]

I like 9 and 3

[@BluhmGardens]

@@AnthonyJ350 whichever feels the most comfortable to the driver is best, was just mentioning that's why the protrusions are where they are.

[@heilong79]

Sounds great.

[@AnthonyJ350]

Here's how the car sounds now kzbin.info/www/bejne/hmnCaHichqqMpa8

[@archangele1]

I have been driving a manual shift 350Z and Infiniti Q60S for over 10 years now and I find that the 10:00 and 3:00 position works best. But this is just for manual shift cars. As for starting, due to the fact that old 350Z's have the classic start up rattle (due to how slow the timing chain tensioner pumps up) I find it better to start cranking right away before the fuel pump primes the system. It lets the engine crank a few turns before taking off. This reduces that start up chain rattle by a good 50%. As for warming up, it depends on what speed limit the road you will be driving on has. If it is like where I am and you are plodding along at 25 - 30 mph for a mile and a half, I just wait till the engine idles down then I go. But if I were to pull out onto the main road my road dumps into, I would want that engine warmed up a lot more before pushing it to 60+ mph. Look at your oil pressure gauge. When my car is cold, it will be pushing 90+ lbs when the engine is not warmed up and I am pushing 2000 rpm. Once the engine is fully warmed up, the oil pressure is at around 60 lbs at 2500 rpm. As for syncros, the 2004 I have has never shifted well from 5th to 6th. When cold, shifts from first to second can be a bit slow as well. I have found that OEM Nissan manual transmission fluid works the best in both my Q60S and my old 350Z. If you change it once every year or so, that seems to help. It is easy to change. Nissan has both a fill hole and drain hole so all you need is a filler pump to fill it and to drain it you just remove both the drain and fill plugs. The differential is just as easy to change fluid in.

[@AnthonyJ350]

I would try Redline specified for Nissan, that's what The Z Shop recommends and Dan works and knows Nissans more than most people. But the older 350Z transmissions aren't as good as the newer CD-009. Most professional driving schools will recommend 9 and 3 hand position, this is how I was taught for the track kzbin.info/www/bejne/jIS5k4OdZdiojZI I don't have that timing chain tensioner noise initially, it will come on the driver's side if you let it idle for a bit but then goes away pretty quick once pressurized.

[@AnthonyJ350]

Thanks for sharing all your experience!

[@RandySoWavvy]

Thanks for the tip about the shoes I didn’t even think about that. I pick my Z up in 2 days can’t wait. I got my trucking license too but I’m the opposite of you I can drive any 18 wheeler trailer included as long as it’s auto since I tested in an auto.

[@AnthonyJ350]

I find driving shoes easily overlooked. One time I went to work in my car using steel toe work boots with a thick sole, it was horrible driving the car. Couldn't get a feel for anything as far as the clutch went, and my braking was all off.

[@abiamiamab9677]

Like ur vids.

[@AnthonyJ350]

Thanks!

[@MrNatans]

Thanks man,very useful.So far I'm doing the same with Celica,guess,next step should be Z350,to not jump over...

[@AnthonyJ350]

Thanks for watching!

[@justicewing]

they are tips for basically any cars. Pretty fundamental too. but ya, not many people know them.

[@AnthonyJ350]

For the most part yes you're right.

[@ColinBrunnemer77]

i’ve been frustrated because i’ve had my z for a year and 4 months and still am not perfect with my shifts... mainly the 1-2 shift... didn’t know that u could even adjust the throw/engagement of the clutch pedal by getting the rjm pedal, thank you so much

[@AnthonyJ350]

When you get it, let us know how it worked out for you.

[@AnthonyJ350]

Here's the video on the pedal. It shows the difference vs stock kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@HomeAwesomation]

What is the device (second screen) in the flip up lid area? Does it come with the bezel and if not where did you get that. Looks clean.

[@AnthonyJ350]

It's Greddy's Infometer Touch kzbin.info/www/bejne/omrdeJZ3jpiAh6M

[@Shadowshift350z]

the last tip i do it with common sense but i like your tips and thanks

[@AnthonyJ350]

Thanks for watching!

[@stupidfaded5682]

Thank you so much, I was getting confused with the clutch pedal (stock) I would push all the way down and it would mess with my timing. Thank you so much🙏

[@AnthonyJ350]

Glad it helped! Highly recommend you install an RJM Performance clutch pedal assembly, drives sooo much better after.

[@deftones2684]

Wow awesome video man. I actually drive my G35 six speed in just my socks so I can get all the feel I can with the engagement point etc.

[@AnthonyJ350]

Haha very funny. Orrrrr are you being serious....

[@deftones2684]

+AnthonyJ350 No I'm dead serious I always drive in just my socks, I can feel everything in my G that way. I used to use really form fitting pumas but not now.

[@deftones2684]

+AnthonyJ350 I have an 05 G coupe six speed with Stillen exaust and Greddy short ram, it's nothing amazing but I feel every shift, every hard pull and every burble of the exaust that way.

[@AnthonyJ350]

No way! That's awesome! You have to make a video of it. If you're into feeling the car have you changed any of the bushings yet? The transmission one you feel a lot.

[@deftones2684]

+AnthonyJ350 ID love to make videos but I don't know how, I don't even have a camera. But no I haven't changed the bushings I never even thought to do that but I'll definitely look into that if it makes a difference.

[@joncarow2783]

I haven't seen all of your vids so maybe you have already answered this .You have an exhaust on this? What type? Sounds awesome

[@AnthonyJ350]

Here's my latest setup kzbin.info/www/bejne/hmnCaHichqqMpa8

[@Stuntman2128]

yo cool video man! i got a g35 recently and it makes the same song as 18:55 it's like a cement mixer/rattle sound but goes away when i press the clutch in. it's even louder when it's fully warmed and rpms are down to like 500 (in neutral) and also can hear slightly when moving in gear upto like 1500 rpm. i've heard this is a common issue on the Zs and the Gs. wondering if you're having this same noise and transmission has been fine so far?

[@AnthonyJ350]

I don't know if I would call it an "issue" since the the noises don't lead to any failure. I think it's just a quirk of the car. GTRs make funny noises too. Just put a quality fluid in like Redline for Nissan and you'll be fine.

[@robertoescalante8641]

Subscribed... great content!

[@AnthonyJ350]

Thanks so much for subscribing. Make sure to check out our 350Z playlist!

[@josephflores8205]

i thought that the small modulation was a sign of a clutch that was going out. The space i have to work with is very small. i have been having a heck of a time trying to get it right. Being at a light and unable to smoothly get going makes it look )and sound) like i don't know how to drive.

[@AnthonyJ350]

Joseph Flores Get the RJM Pedal assembly. You won't regret it

[@dbar1]

great video! Do I have to down shift from light to light in town or is it ok to just throw it in neutral and use the brake?

[@AnthonyJ350]

Yup you can throw it into neutral and coast in certain situations.

[@christianchavez5098]

I always just coast in neutral. As I'm coming to a stop I'll apply the brake then put it in neutral and make a smooth stop.

[@aladinhegic3306]

@@christianchavez5098 same and I think its its perfectly fine, no damage seems like that can be done

[@noahzm_]

It’s fine don’t listen to other people that say it’s bad just don’t hold the clutch while braking in netural

[@arianewell6252]

Woah, where did you get audio shoes? They closed down like 5 years ago.

[@AnthonyJ350]

They were a birthday gift a loonnnnng time ago. I basically just wear them when I drive the car lol.

[@sneakerknockerz702]

Aria Newell they’re dvs shoes, similar to adio

[@ramirosegoviajr8917]

First day driving standard in a 350z with a stage 2 clutch and buy is it hard to get a clean start 💀

[@AnthonyJ350]

Need the RJM Performance clutch pedal assembly kzbin.info/www/bejne/aKGWpYJ5f6d8oq8

[@just_a5.7]

When your so bored you wana search up cammed 350z

[@ramzimoraliofficial7296]

5:30 im pretty straight hahaha

[@AnthonyJ350]

Or should I have said "upright"?

[@NorthFloridaMan]

I just bought a z yesterday I was launching it at every red light cause the gas is so touchy lolnice video

[@roddydykes7053]

Pablo Oliva it definitely wants to climb on the revs lol

[@AnthonyJ350]

It takes some getting used to. If it's manual you'll want this mod kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@Rymden2]

Do u have a video on how to install aftermarket screen instead of the old ugly one? Is it a difficult job to do?

[@AnthonyJ350]

Rymden2 Yes I do, it's in my 350Z playlist on my channel.

[@EasyOhh]

So, just curious - what kind of modifications have you made to your engine bay? Looks a bit different from your average 350z bay, at least mine anyways (2006).

[@AnthonyJ350]

Av8tor I have a Saikou Michi oil catch can and some Motordyne parts on the engine. That's probably what makes it look a little different.

[@jamesbono5744]

What did you say was the fix to the clutch engagement thing? I just got a g35 and getting it to roll is the hardest part. Shifting up and down and rev matching is pretty easy but the top end clutch engagement really messes with me

[@AnthonyJ350]

You need this kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@farley9255]

Sir, what's the screen you have above your radio? I really like the look of that set up.

[@AnthonyJ350]

Shane Farley Greddy Infometer Touch kzbin.info/www/bejne/omrdeJZ3jpiAh6M

[@farley9255]

AnthonyJ350 thank you Sir

[@PetreMihai94]

I just simply put the contact, listen to the fuel pump and then wait for all the lights to shut down (in all cars) , then after a few moments I turn it on and wait for the oil to make its way in the engine for a minute. A lot of people just skip all the key steps (some cars even have 3 levels where your key cliks before ignition), turn it on and run after 1 second. That's awful for the engine. And in turbos you have to wait before turning off the engine a while so the turbo cools down. I know for most of you can sound pretty obvious but where I live I see like 90% of the people skipping what I'm saying.

[@AnthonyJ350]

Yup, doing the simple little things and understanding components will make your gear last longer.

[@FaizNoorani99]

Just got a ‘06 roadster. Thanks for the tips , I felt like the car wouldn’t shift smoothly at certain rpms. I can see a big difference after trying it!

[@AnthonyJ350]

Glad they helped!

[@FaizNoorani99]

@@AnthonyJ350 would love to get some advice about the car if possible! Had a few questions about the clutch and the roof mechanism for a roadster if you knew anything about it!

[@AnthonyJ350]

@@FaizNoorani99 I don't have any experience about the roadster features honestly. Never worked on one.

[@FaizNoorani99]

@@AnthonyJ350 alright, thanks!

[@FaizNoorani99]

@@AnthonyJ350 any main things to look out for right after purchase?

[@Ask_the_neighbor]

2005 350z ... i added the rear spring isolator with tein lower s springs .. looks and handles amazing tp jwt costume exhaust great video befor watching this video i did 90% of these driving procedure.

[@AnthonyJ350]

That's great to hear you're already doing most of it. What's the other 10%? Also did you come across my coil spring isolator video?

[@Ask_the_neighbor]

AnthonyJ350 yeah i came across the spring iso mound vid . The next moring i ordered mine. the other 10% was shift points , which now i find my self practicing that . great video

[@AnthonyJ350]

What did you think about the spring isolator? Car sits better and the handling is good? Let me know how shifting just under 3K does when you cruise around.

[@Ask_the_neighbor]

AnthonyJ350 less notch 'y' befor 3k after 4k it gets notch 'y' and the srping isolator and tein s springs make it handle real nice with the looks

[@WolfParadisePlus]

Best 350z tips!

[@AnthonyJ350]

Thank you!

[@Usef320]

when i first started learning manual it was really demotivating because i couldnt get it right, tried on a different pair of shoes and it felt like a different car. Dont wear big clunky shoes, especially for spirited driving.

[@AnthonyJ350]

Great tip!

[@sirdragonfighter1997]

The footwear I understand that I started drinking a year ago and I like the more of the feel of the gas pedal than where thick shoes but then again I'm in an auto car

[@AnthonyJ350]

Thanks for the comment. I would probably stop the drinking though.

[@jacobwright1279]

I’ve had my 370z for over a year now, but the rev matching is a pain for me to get right. My biggest issue is the pas pedal. Sometimes it responds to the blips, sometimes it take a few seconds to register before blipping up, and sometimes nothing happens and then when it does it goes to high. The gas pedals on the 370z are bracketed to the floor facing straight up vs the 350 and most other cars that hang down.

[@AnthonyJ350]

Thanks for sharing that about your 370Z

[@lacedbyhuncho7010]

How much and where do you find that display that says the engine information on top of the steep

[@lacedbyhuncho7010]

Stereo*

[@AnthonyJ350]

This is the product kzbin.info/www/bejne/omrdeJZ3jpiAh6M

[@kevinjohnston994]

From :42 - :49 was he rev matching while downshifting????

[@AnthonyJ350]

Yup

[@chrdeleo]

hey Anthony I have a 03 350z touring. I doesn't come with the steering wheel audio control on the steering wheel. I have an aftermarket double din with steering wheel compatibility. My question is can I get one from a newer model and installing it on my 03?

[@AnthonyJ350]

Maybe. I've never looked into it, I don't know if you have the same wiring harness as a car equipped. I'd check the forums to see if anyone has done it.

[@jimjones3287]

Sounds very tricky, expensive and probably more trouble than it's worth.

[@meaphd7767]

Yeah I’ve owned my z for almost a year already and haven’t driven it by myself once 😅😅

[@AnthonyJ350]

Do you have a co-driver critiquing how you're driving the car? No shame in trying to get better by learning from someone.

[@Mobe1283]

When I’m at a red light and I put it in neutral sometimes it’s really hard to put it in gear either first or in reverse.why is that?

[@AnthonyJ350]

Could be a number of things. I would put Redline fluid www.z1motorsports.com/clutch-and-flywheel/red-line-oils/red-line-mt-90-gl-manual-transmission-fluid-1qt-p-110.html You also might want to change the clutch fluid, exchange the flex line for the slave with a stainless braided version that is heat shielded and change the slave cylinder. The RJM clutch pedal assembly is a nice addition as well kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@Hamsteak]

I always pop in neutral when I have to wait

[@AnthonyJ350]

Thanks for sharing!

[@fellini7026]

Do you give it gas at the bite point or at the same time as you're releasing the clutch?

[@AnthonyJ350]

I'm "blending" the two at the engagement point yes.

[@Thebizkit123]

Can somebody help me so I recently had a new clutch installed on my 350z and it's super light and sensitive and the biting point is so low. And also in my level parkway when I'm in first with the clutch all the way in if I let of the brake the car moves foward a bit with the clutch all the way in! Is this normal?

[@AnthonyJ350]

It sounds like you're not getting full action from the slave. Was the clutch fluid replaced? Maybe have them bleed it again?

[@Thebizkit123]

AnthonyJ350 Yeah he flushed it added new brake fluid also I think a little pump thing got replaced that was in the transmission man

[@AnthonyJ350]

Tony the Lakers Fan You probably need the clutch pedal adjusted. The RJM Performance clutch pedal assembly is awesome because it's fully adjustable.

[@jr.7842]

I couldnt find the video where u modified the dipstick to check the oil. Care to link me perhaps? @anthonyJ350

[@AnthonyJ350]

Here you go kzbin.info/www/bejne/Z4rVnaRobZqIfrs

[@Charles-jo8ub]

Good look it didn't think about fuel pump prime

[@AnthonyJ350]

Thank you for watching!

[@earias135]

Great video please make one on heel toe rev matching 👌🏻

[@AnthonyJ350]

Noted

[@AnthonyJ350]

Here's the Heel & Toe video you wanted :) kzbin.info/www/bejne/h5S6YaWQmtBlgsU

[@g35tho11]

I have a 06 g35 6MT coupe and when I put the key switch to “ON” position the car shakes a little and I here rattling noises from the back rear almost like a boiling noise.what could this be please help

[@AnthonyJ350]

Not really sure. The only thing back there is a fuel pump. I would bring it to an experienced mechanic.

[@g35tho11]

AnthonyJ350 so I think I found where the noise is coming from ! It’s the “ACTIVE REAR STEERING” component! I went under car and put the key switch “on” and it seems like it turns it on and it pumps a little bit side to say and makes a rattling noise ! So does that mean my rear active steering is broke ?

[@bricked9768]

7:53 I always assumed thats what the beeping is for when you turn the key to the on position. Then when the beeping is done it lets you know its ready to start..

[@AnthonyJ350]

Alwayswintertime That's an interesting observation.

[@bricked9768]

just tested it in my G today and its just a seat belt warning, maybe its different for the Z idk

[@beardedhoya]

So, when you started and took your foot off the clutch, it sounds like a tractor. Does it thunk too when that sounds comes and gos? Mine does that, people have been telling me its the throwout bearing but Z owners say its just.. Z’s.. lol

[@AnthonyJ350]

Ya Z's just make weird noises. The noise will be louder after you drive the car hard. The next day it's quiet again.

[@juugrich]

What wheels and size are you running? Nice fit and color

[@AnthonyJ350]

Thanks! Here's the video on the details of the Vossens kzbin.info/www/bejne/rmq7fXp3pM-qbNk

[@perucho520]

Great content. Wish you included some convertibles lol. Lil idea for the next videos; what about Franklin 350z as in what parts can fit from a 370 or a better model

[@AnthonyJ350]

That's a great idea! I'm going to do a video on the rear wheel bearings hopefully next year. I've been told the ones from the 370Z will fit. I do have a video on the Akebono brake upgrade.

[@ejpurr9949]

I was gonna buy a manual 350z but when i went to look at it i realized it was automatic even tho the advert said manual.

[@AnthonyJ350]

EJ Purr That sucks. Keep looking, you'll find one.

[@RandySoWavvy]

Lmao they still do that today and private sellers will call their cars Auto Manual. Just because you can put a auto in manual mode does not make it manual 🤦🏾‍♀️ and most lie about what package their cars are I’ve seen base models be labeled as track models.

[@eduardsandu2218]

Hello, that navi comes with the car or u bought it?

[@AnthonyJ350]

I swapped it out with a head unit from Alpine.

[@ethanorr1135]

I have a problem with taking off in 1st in my car any tips?

[@AnthonyJ350]

Highly recommend the RJM pedal. Watch the video kzbin.info/www/bejne/e2bGoYyfi7-BiKs

[@mr.mopedmadness3441]

I feel you with the shoes! I have driving shoes or If I have flip flops on I always run her barefoot!

[@AnthonyJ350]

Right on

[@m.taylor7025]

Yessss...puma, fila, and even Jordan make great driving shoes. There are others too, but those are cheap. Don't wear them out and about too much though, they're not very durable as walking shoes. Look for a rounded heel, thin sole, and preferably a reinforced outer edge so you can use the blade of the foot to rev up while on the brake.

[@AnthonyJ350]

@@m.taylor7025 I was wondering if Jordan's would make a good driving shoe.

[@m.taylor7025]

@@AnthonyJ350 there's a Jordan Motorsport edition, it does...the classic jordans are too thick in the sole. stockx.com/air-jordan-4-retro-motorsports-alternate-gs but for the best ones, go with the puma drift cat or one of the fila or Adidas parter shoes made with Goodyear. Or just get some Piloti or Sparco shoes.

[@AnthonyJ350]

@@m.taylor7025 I'll look into them, thanks!

[@dialtone5062]

more facts less opinion there is a proper way for all regardless anyones opinion not at all saying you were wrong u nailed it for the most part but make shure they know its the only way these cars are easy to wreck

[@AnthonyJ350]

Thanks for the constructive criticism.

[@jonr7207]

Keep your hand off the shifter between shifts, saves the life of your micros

[@AnthonyJ350]

You mean synchros?

[@braxwright31]

How tall are you? (to know for gas / clutch reach)

[@AnthonyJ350]

Braxton Wright I'm 5'7"

[@jasonconci562]

Appreciate your comment on seat position. My friends call me a grandma for how close to the wheel I am, but it’s just how close I have to be to get the clutch to the floor. In my experience you’re almost certainly right that it doesn’t *need* to hit the floor, but it’s a peace of mind thing for me & I figure it’s better than slipping the clutch unintentionally

[@AnthonyJ350]

Glad you notive the details!

[@krauser8429]

i drove my z with an actual boot you get when you injur your leg. the most frustrating thing to shift with lol stalled a couple times

[@AnthonyJ350]

John schweiger You couldn't feel anything right?

[@krauser8429]

AnthonyJ350 nothing lol

[@AnthonyJ350]

John schweiger Oh sorry I missed this one. Really hard to drive with an injured leg. I suck at driving my car with work boots. No feeling at all

[@Chris-zp1kd]

Reason why to not drive right after you start the engine, if the engine is cold, its gonna run some issues, just let it be heated at first before driving

[@AnthonyJ350]

Thanks for the feedback.

[@ralphmorales3739]

Is your exhaust carb legal in cali?

[@AnthonyJ350]

The Y-pipe and catback would be.

[@ammo8713]

MY REAR WIPER DOES NOT WORK....COULD IT BE A FUSE...IF SO WHERE IS IT LOCATED ? THANKS 👍😁

[@AnthonyJ350]

Check your owner's manual please.

[@nickchinoporos5110]

Your rear wiper motor is probably broken just replace it open your trunk and pop off the plastic cover on it and the rear wiper motor will show. Just take off the 3 bolts and the connector and the wiper motor comes out and buy a new one.

[@strongman3484]

What's the link for thr oil dip stick trick

[@AnthonyJ350]

Here's the video kzbin.info/www/bejne/Z4rVnaRobZqIfrs

[@TheQuestionTheAnswer]

Hey what's that display you have in the cubby?

[@AnthonyJ350]

Nathan P Greddy Infometer touch. I have a video on it

[@TheQuestionTheAnswer]

AnthonyJ350 Cheers 👍🏿👍🏿

[@danielgalicia9079]

Where did you get your shifter knob?

[@AnthonyJ350]

I think I purchased it from eBay.

[@raviolitrail]

I've owned 15 350z. I get in that bitch and hold the gas pedal down to prime the pump when I turn over. Then when it bounces off the rev limiter I know my oil pump is good to go. Always bounce it off the rev limiter when im shutting it off too. It helps burn off all the unused gas which can hurt you engine when its not running.

[@AnthonyJ350]

I can see why you've gone through 15 of them...

[@tunasandwhich176]

please cover rev matching

[@AnthonyJ350]

You're request number 2.

[@AnthonyJ350]

Rev matching covered kzbin.info/www/bejne/h5S6YaWQmtBlgsU

[@Charles-jo8ub]

Give it holy hell

[@AnthonyJ350]

You got it

[@nathankrahn7705]

i respect the wifebeater shorts

[@AnthonyJ350]

lol

[@Jeffball610]

I'm sorry, I couldn't even make it 5 minutes in watching at 1.5x speed. These are general driving tips. They might be good, but this is not special or specific to the 350Z in any way.. I would also recommend that you keep both hands on the wheel instead of one on the shifter while driving and rev matching is totally unnecessary unless you're on track. I enjoy my 350Z and I hope you do too.

[@AnthonyJ350]

Ya it's hard to get my whole point across in under 5 minutes. If we don't cover the very basics (in anything) we miss the boat. If you go to 14:45 I cover the clutch engagement point which is unique to the 350Z and G35.

[@AnthonyJ350]

On another note I probably rev match 60% behind the wheel because I do believe it's easier on the clutch. If I'm driving it real slow I just let it out very slow.

[@Jeffball610]

This isn't unique to the car. You can always adjust your engagement point on a clutch. It's good to note for those looking to get into the 350Z though.

[@AnthonyJ350]

So you think the clutch modulation "window" is the same like every other vehicle? Or do you find it is a lot smaller compared to most cars? I drive 2 to 5 different cars a day and the clutch feel is different. You can adjust the pedal from stock but you cannot increase the modulation on the stock clutch. I even show it in this video kzbin.info/www/bejne/e2bGoYyfi7-BiKs