The EDC TOOL KIT That Lives in My Backpack 2024 Update

[@BestDamnEDC]

Try Rocket Money for free: rocketmoney.com/bestdamnedc #RocketMoney #personalfinance (ad)

[@NonyaDamnbusiness]

I install and repair servers in racks every day, all day. On my hip is a Swisstool X, Olight baton on a magnet belt-loop carrier, and a discontinued Benchmade OTF in S30V. Those three items get used the most so they're on my belt and they disappear until a polo shirt. In my Eberlestock $99 bag I have my laptop, a pouch with a bunch of serial cables (for configuring routers, switches, and servers), and a clothing "cube" with a mesh top for other various cables and tools like electric screwdriver, USB-powered soldering iron, various TORX wrenches (hard drive carriers & CPUs), and a small ratcheting driver & bit set. I can walk into any datacenter on the planet with that and pretty much install or repair any server or switch hardware with it, and all of it has been tested over time across 3 different continents both in and out of combat zones.

[@justanothergunguy]

The pliers wrench are absolutely awesome! I work in industrial ag and use my pliers wrench more than any other tool! They’re so versatile and easy to use. I definitely need the little guys for my range bag.

[@BestDamnEDC]

I have them in a few sizes and I always reach for them over a wrench first because they work so well and are way faster than hunting for the right size wrench. They don't always work, but when they do, they're amazing

[@mapache_del_sur]

They’re also thin, and good for tight spaces! They make a great present for anyone too. I made an edc kit for my in laws and they’re an essential piece for them.

[@nvrumi]

I picked up a small Bahco adjustable wrench to supplement the Knipex. The Bahco is very thin and makes a good second for holding the other end of the bolt. I had to remove a brass gas fitting on the camper (in the field) and managed with a wrench and my Leatherman pliers. The Knipex and Bahco would have made this a trivial operation. It was after this experience that they were added to my kit.

[@Ayychh]

I've been rocking the Victorinox Deluxe Tinker as my multi tool. Need to put together a tool kit

[@zipzip8239]

$66 for a pouch is insane

[@MouseCIick]

Mighty pouch + easily cost 55 dollars if you can even find one.

[@zipzip8239]

@@MouseCIick also a rip off

[@Hatch1182]

at least someone said it

[@jzayas5698]

$46 for the tape measure and $45 for the pliers too.

[@SuperbChicken]

@@jzayas5698$17 tweezers

[@matthewshannon6946]

I was an apprentice cabnitmaker (inside the shop job). I got sent outside on a job with an experienced guy. I observed him for a couple of days and was very impressed and I learned a lot. I finally got the nerve to ask him why a cool guy like him would use a nerdy mechanical pencil. He shut me up in one second- He said "My line is ALWAYS the same width." Pure genius!!

[@marcpereira1438]

Take a look at the Pipe Vise Micro 5

[@justinbrewer6869]

I sport a standard box cutter from office max. Attached to a couple of magnets.😅😅

[@glennwillis653]

My EDC has to be small, do EVERYTHING, and belt change easily. Leatherman Wave is simply best. Knife opens one handed. Pliers Wire cutters. Multiple screwdrivers, and changeable/replaceable, Can opener, (eat the beans with knife blade,or carry a soup/teaspoon. Diamond file for fingernails, (I have wished it detachable for sharpening the knife.) Also, I park a small neodymium magnet near saw hinge for picking up tiny bolts, fishing bols from holes.

[@nvrumi]

I carried a Wave/Wave+ for more than decade. My one caution (school of hard knocks) is to be careful with the pliers because I pinched the #%@$ out of myself twice. Leather gloves help prevent this. When Leatherman released the ARC I bought it and its configuration reduces the likelihood of a pinch substantially. Yeah, it's expensive but what good tools are not an investment? Nice kit. I use the diamond file in the ARC for cleaning up my fingernails too. The scissors will work in a pinch to trim them. I added a small Worksharp sharpener to my pack this year. It works well if you are a hand sharpener and is not too expensive.

[@shelp7858]

i just added an extra flashlight to my backpack kit. i updated my old mini mag light with a new bulb and lithium batteries. i use it in conjunction with the o light arcfield uv i carry everyday. It's just nice to have a battery run flashlight with lots of range.

[@BestDamnEDC]

Good stuff man!

[@michaelzamoraii2161]

Can't go wrong with a Mag. Can't imagine dropping a Arkham. 😬 Guess if I had to choose one I'd prefer the Arkham but who knows what it COULD go through in a life or d€@πh situation.

[@CoachDub19]

Great kit! Fingernail clippers is always a must for me in all my kits. Carry on!

[@BestDamnEDC]

Agreed! I keep a little grooming kit in one of my Pocket Safes in my Bum Bag

[@NorfTec]

I’ve never really understood this, I cut my fingernails with the scissors on my multitool and they turn out fine, i cant imagine carrying clippers around daily when there’s alternatives (that most people carry) that do the job fine

[@ralf-5]

Nothing beats clippers. You probably have finger nails that look like a wild dog has chewed them.

[@NorfTec]

@@ralf-5 judging by how you think I’d cut them it seems fitting you carry around your little pedicure kit

[@ralf-5]

😂 careful your insecurities are showing! 😂

[@brianbreeding1]

Nice bag. For me, my Nutsac Double Admin goes in every backpack or satchel. And yes, I feel the pain of overstuffing.

[@BestDamnEDC]

Nutsac makes some great bags and pouches, too, for sure!

[@matthewshannon6946]

I've always observed this, as I've got Channellocks that I've used for 40+ years and they work as well now as the day I bought them. The Knipex are likely to last just as long. Value for the $ in both cases.

[@rastamouse7861]

Everyone makes fun of my sling bag or "man purse" until they need my battery, bandaids, flashlight, scissors or Gameboy 😂. Man purse indeed.

[@captain_wolfsbane6468]

first time my sister (6 at the time) saw my unisex bag she called it a manisex bag, the name has stuck.

[@matthewshannon6946]

Yep, everybody laughs at the load I carry to the Show- but they all know who to come to when they need a 3/8" coarse tap....😂😂

[@rastamouse7861]

@@matthewshannon6946 tell them "I say good day to you sir."

[@jmplese]

Where did you find micarta scales for the Arc? That is a must!

[@unknownartist47]

The only things I would add is a couple of different band aids and an antiseptic wipe. ✌️

[@jzayas5698]

Alcohol wipes work pretty good for that matter. The band aids are a very good idea. I would also add a small tube of super glue.

[@puthycat]

As someone who works in aviation hydraulics, Knipex adjustable wrenches were one of the first things recommended to me, and it’s possibly the tool i regret buying the least.

[@kld997]

Maybe check out the Wera Tool-Check Plus, seems like more functionality in a slightly larger form factor than the Fix It Sticks

[@EverettVinzant]

This is great. I'm going to present an opinion only, not saying anyone else is wrong or that I am absolutely right in any way... I have to go with a carpenter pencil instead of the mechanical one. I can buy one, cut it in half and either carry two with me (in case I lose one) Or I have one in each of two different places. And I could buy a WHOLE BUNCH for what the mechanical pencil costs. Sharpening it? Isn't it in an EDC kit with blades anyway? Plus, throw a sheet of sandpaper in an EDC kit and you don't even have to have a blade to sharpen it... So you have a solution for airline travel. AND they write on write in the rain paper. I've replaced carabiners with 550 cord shackles. They do the same thing, weigh less, cost less, aren't conductive, and are flexible so they can get out of the way. Also, did I miss the light somewhere?

[@keeannelson4986]

$113 for a compact pick set is a little absurd, but that is the most comprehensive compact pick set that I've seen.

[@BestDamnEDC]

I know it seems a bit silly, but it is really one of the most well thought out kits I've seen, and it's made here in America by the same people who were making the Covert Industries tools before they started outsourcing to another country

[@donculver8671]

Love it, I'd throw a couple band aids in as I'm always cutting or banging up my knuckles and fingers. Also as an architect I have a micro notebook from Pico pens as I gotta sketch or draw something on the fly. Oh, and some random length para cord.

[@mquez6125]

Good morning from SD. I wanted to ask if there is any way to get a hold of a Magnus blade holder for myself?

[@whiteperson1]

nice kit, i would add telescoping magnetic retrieval tool to your kit, comes in handy surprisingly often, wont take up too much space

[@32milesnorth]

Fantastic kit! I can’t live without a few feet of paracord but love the kit!!

[@raymundorodriguez7535]

Where can i get that utility blade holder for extra blades!?

[@BestDamnEDC]

It's from Magnus but he hasn't made them in a long while. I want to say I spent like $115 or so on this thing thinking it was an actual utility knife but it's just a blade holder 😅 magnusx.com/search?type=product&q=Utility

[@Ashton.everydaycarry]

Nice kit! I like to have two different sets of bit drivers too. Can come in handy sometimes. I keep my leatherman wave with the bit kit and ratchet driver in mine. Otherwise pretty similar items to yours. I also put a flashlight in mine, in case i dont have one in my pocket. Also included a bandana/shop rag and some micro fiber cloths.

[@Rick40years]

Small vice grips is very beneficial.

[@Countryboy071]

Just ordered a pair for my edc. Surprising how often I could do with them.

[@alessandroconcas]

Great edc wuth small footprint.. hey, just laugh of my 2 problem: 1)black hoodie with most of black/dark tools, if saw with smatrphone are not so clear (need at least a 10 tablet or pc monitor), 2) the cameraman give me deadache with continium zoom in/out and the move camera like drunk people!

[@TylerSnyder305]

Can it really be called EDC if it's not carried on your person in your pocket or on your belt ? A lot of people put kits together that have to go in a backpack...etc or is barely usable because it's perfectly packed in an altoids tin. To me EDC has to be easy and comfortable to carry on your person, if it's in your vehicle or off body in a backpack it's not EDC. Maybe that's just because I'm a blue collar guy who doesn't have a desk or backpack or anything like that and needs the things I carry to be on my person at all times.

[@retardno002]

I guess it depends, I never go anywhere without my backpack, so for me the backpack *is* EDC. And so is everything inside it by extension.

[@gregrudzinski]

Super set up. For the measuring tape I would maybe go from 3 ft to 6 ft. I like the Milwaukee 6.5 with inches / cm scales.

[@BestDamnEDC]

Good call!

[@aubreyleonae4108]

Me too, I just bought a couple more. I haven't found any tapes with both. Comes in so handy. Very light as well.

[@justinbrewer6869]

Honesty... why arc over the rebar..... ??

[@Corbinthadude]

Can we get a full video on alcohol wipes

[@youknowwithMartyKauffman]

You should definitely pick up that gold ratchet. They have at Harbor freight.

[@BestDamnEDC]

😅

[@aubreyleonae4108]

It's cheaper last time I was in.

[@russellsage4953]

i obsess over edc kits im intrigued by the lock picking i end up in the same scenarios 😂

[@youknowwithMartyKauffman]

@@russellsage4953 well keep it legal

[@pavlosslavinskyi4871]

What do you do to carry this everyday ? I get when going camping or outdoors adventure, why do you need alcohol pads and multitool around the house ?

[@wesb123]

It’s called having a job 🔧

[@Ashton.everydaycarry]

Did you include anything to use the utility blades with? You've got the holder but can't really use them that way.

[@BestDamnEDC]

I always have one in my pocket

[@Ashton.everydaycarry]

Oh that makes sense!

[@benschumann3800]

RAE GEAR make a great leatherman bit kit and driver holder 👌👌

[@tombeer4544]

Maybe a small or medium Gear Tie from Nite Ize. act as a third hand or another way to hang or prop up odd shaped objects for repairs or use.

[@BlueTickCH]

Those things are legit . I work building maintenance and can't tell you how handy and tough they are

[@EdwardVanNatta]

I am looking for more information on this post there bag building looking thing in bag get it .

[@HurleyBrley]

Have you tried out pipe vise- mini-edc

[@GODtuber13]

What you said about using the strop across the blade... makes sense.

[@ozzmann3217]

Any mechanic knows the cobras are the best pliers for almost everything ever made I love the wrench pliers too if I could only have ones it’s cobras they do bolts screw heads and pipe different shaped fittings etc

[@IOSALive]

Best Damn EDC [Taylor Martin], Subscribed because your videos are always awesome!

[@BestDamnEDC]

Thanks so much, hope you enjoy the content 👊🏻

[@Sparky02Stang]

What was the utility blade holder?

[@pongarrh]

The edc space on social media is a weird one… on camera everyone is talking about how useful the clearly never used tools are…. But I enjoy watching these vids and collecting the shiny stuff…

[@retardno002]

It's a bit like the sneaker space, and I think the explanation is similar, people who review stuff for a living have to rotate through a lot of stuff. And when said harder stuff is made of 60+ HRC steel it's hard to get a lot of wear signs on any individual tool. Not to mention that they probably get at least a proper wipe down before being shown on camera.

[@craigbranstrom4749]

I am not sure why you need a EDC kit around the house. When I am at home I have a full tool box and a garage full of tools. I have a EDC kits in my vehicle for when I need tool when not at home.

[@MB_EDC]

Some great stuff here - but I made it nearly $600 for the pouch and everthing in it - plus $260 for the Leatherman Arc. That's around $850 for this set up... That's crazy money. could you do one for $100-150???

[@ryanzhang4897]

I have a sweet setup for around 150

[@MB_EDC]

@@ryanzhang4897 This is my point..... That's a crazy cost!!!!

[@AllWeatherFirestarters]

Great Video and Channel! Any possibility of maybe doing a product review of our Firestarter?

[@sameeralazawee7524]

Thank you

[@toma1460]

Hey Ben, That video Taylor Martin did of you at the show was great. 😂

[@d.Cog420]

Did you say what leatherman that is?

[@outahismind_]

man worksharp needs to bring that sharpener back. Its exactly what I have been looking for.

[@BestDamnEDC]

😏

[@outahismind_]

I may have snagged one of the last ones out there after this video but if you are suggesting you are bringing them back I could always use a few more ;) ​@@BestDamnEDC

[@BestDamnEDC]

It's not the same thing but it won't cost nearly as much either 👀

[@outahismind_]

@@BestDamnEDC even better!

[@justinbrewer6869]

100 percent agree

[@terrywatson3606]

Would love to see some of this stuff being used in a everyday scenario, ive said it before , most of the items i own are scratched or worn, yet every video on KZbin channels always show pristine items.

[@BestDamnEDC]

Sorry, I'll zoom in further for you next time, boss. A video of me just using tools to use tools sounds like watching paint dry, but you keep asking ...

[@bobone866]

Some of us use thing a lot and dont have many scratches on it. I love my lights so much i use them only in a pocket without other stuff and im the only one that uses them.

[@WadeKnifeandTool]

From one Taylor to another, awesome video!🙌🏻

[@wesb123]

Fun stuff!

[@BestDamnEDC]

Appreciate the support 👊🏻

[@wesb123]

@@BestDamnEDC always man! 🔧

[@cryptogwarn397]

Opa . Salve, salve. Vamos estudar. E lembro q na wallet Unisat tem tanto BRC20 qt Runas.

[@A-B1566]

This is very helpful

[@pikemaster20]

I got 570$ rounding down and leaving some stuff out, so prob between 350 and 450 to build a version of this from scratch.

[@Viking_Outdoors_EDC]

Loving the new hoodie…. Will that be dropping soon?

[@BestDamnEDC]

It's actually a really, really old hoodie I didn't know I had until we moved offices 😅

[@Viking_Outdoors_EDC]

Well…. Can we get a re launch of the really old hoodie 😂 us UK people love a hoodie 😂😂

[@robr3723]

I would add some electrical tape... I can't tell you how many times it's come in handy

[@drowsytime]

Bladeville sends it's regards.

[@BestDamnEDC]

Good to see you in here again 😂

[@microMobilidade]

A pair of nitrile gloves (the disposable tough ones) in the alcohol wipes pouch would be cool

[@justinbrewer6869]

And the leatherman rebar... does nearly every job.

[@jimmd53]

Small light or lantern would be desirable.

[@davesanders9203]

Nice video. Did you cut a "REAL" Penny or a FAKE Penny? The fakes are easier to cut.

[@tofuwitzke]

I dont know if you would even want to do something like this, but it would be super cool if you sold these entire premade kits on Carry Commission. I think they'd sell like wildfire.

[@BestDamnEDC]

It sounds really nice in theory but in practice it's a lot of coordination and a bit of a logistical nightmare. And there are some wholesale companies that forbid you from selling their products in "kits." That's not to say we won't or wouldn't, but it's a bit of a process for sure

[@kwiknikk]

This kit for example would be like $500 lol

[@BestDamnEDC]

@@kwiknikk I literally talked about how much it cost at the end of the video. It's half that...

[@kwiknikk]

@@BestDamnEDC well that makes me look silly now doesn't it. (I thought for a sec the arc was in it hehe)

[@kwiknikk]

@@BestDamnEDC Not that it really matters, but even if you ignore the small things like the zip ties/alcohol pads, very expensive pencil and not even getting into the items inside the pouch you're at $300 before tax lol. But I get it, it's a very cool kit and meant to give people ideas and I love the video. I just don't think it's realistic to sell them as kits like you said.

[@HappyOrwell]

I love how defensive you are about every piece of gear, because we all know how ruthless the comment section is. Also love the gear thats there because they're from friends or because you had it and it's genuinely what you like and use

[@bruceglisson1720]

What can you do with those tiny tools. Can you rebuild a car engine, or wire a house.

[@BestDamnEDC]

Odd jobs that come up often, unlike rebuilding a car or wiring a house... For big jobs, like any sensible person, I have a shop full of tools.

[@Adam.297]

I have been working on a similar concept, but instead of supplementing the multitool, I wanted to replace it. The idea has been shelved for now, unfortunately.

[@Countryboy071]

Nice but expensive for edc. I prefer a more budget friendly kit for this. More quality gear in a daypack.

[@noahgrady3628]

Dude gets in his car and drives 1.7 miles to work in a city…every day. Literally NEVER needs, anything he just showed you..”do I lock pick all the time “?.. just get a pocket knife. It’s okay. We won’t be mad.

[@BestDamnEDC]

Sounds like a lot of projection to me...

[@gruftle]

Idea for a video, total up the cost of your edc, your toolkit and the contents of your bag, excluding laptops cameras etc and then do complete system for 25% or 50% of the total

[@BestDamnEDC]

Interesting concept!

[@soundsomething4089]

What happened to Mod in a box?

[@rory4656]

His wifes boyfriend makes bim carry all this

[@tristanbrown4843]

70 bucks for that pouch 🤣🤣🤣😂😂😂😂 what a ripoff

[@Esteben138]

Is this a merse?

[@GC_4]

No Ranger Bands? 😮 Do you prefer Gorilla Tape for that purpose?

[@BestDamnEDC]

I tend to use zip ties and tape more, yes

[@GC_4]

@@BestDamnEDC Right on. Thanks for the reply and all the quality content👊🏻

[@Cmack2113]

I’ll never say it how they want me to say it! Knife, know, Knox, knowledge, Knowles, knee, knight, knot, knit; Knipex=Nipex 😤

[@Mexicanmike87]

Super solid kit love your videos 🤙🏽

[@BestDamnEDC]

Glad you like them! 🤘🏻

[@CarlConti]

Thanks Taylor. Great gear options and review!

[@justinbrewer6869]

Yeah for the pencil

[@jzayas5698]

I would add band aids, one of those small tubes of super glue and maybe a small lighter would be a good idea.

[@JPC326]

Where can we find that small black box you use for the bits ?

[@nickkammer5863]

It’s pronounced knipex not knipex

[@BestDamnEDC]

Alright, Hermione 🪄

[@MidwestPrepper]

How long has the camera man had Parkinson’s. And stop playing w the zoom.

[@CaptRikki]

Your mother seems to love home much my hands shake 🤷🏻‍♂️

[@cashdingo6386]

Knipex first before all else! Unless you need something else then use that.

[@gradeaoutdoors2572]

So you dont use plumbing pliers but you’ll use electrician scissors? Erggh rage, fight about this in the comments (Joke)

[@MaryRivera-p1i]

Antonetta Cliffs

[@slik560]

Love Knipex tools. I've spent WAY to much on their pliers/wrenches and specialty pliers, but my great-grandkids will be using them someday.

[@justinbrewer6869]

Lighter yup.. tape. Yup tweezers yep....

[@ArneAsada69]

Besides the Knipex, I don’t like any of these other items.

[@BestDamnEDC]

Congrats

[@onirrapdivad]

I thought this was a Jay and Silent Bob promotion

[@kathleensmith370]

nice pouch

[@BestDamnEDC]

Thanks, it’s a collaboration between Carry Commission and Blue Ridge Overland

[@OhshitPositive]

Klein calls them scissors, so they're scissors.

[@Im_user1000]

First you say in the ad that you forgot about your subscription and then you say that you never forget about your subscriptions and that you’ve been using rocket money for years

[@BestDamnEDC]

That particular subscription is an annual one for Geoguessr. Most are monthly and I don't check Rocket Money religiously. I check it every few months to make sure I'm not paying for something I don't want to. It's not that deep

[@Im_user1000]

@@BestDamnEDC Appreciate your reply. Sorry if I sounded rude. Have a great day.

[@krisnrg]

That is one expensive pouch.

[@bba7625]

Kinpex is a German Company. Withe a K.

[@Rahujavaikus]

I think it's a bit of a over kill😅

[@aubreyleonae4108]

Hmm

[@7duke77]

Knipex - I used to think it was just nipex, since that's what it would be in American English (e.g.: knife) but yes, it is KA-nip-ex! Also, yea those are SNIPS, not scissors! (lol) Oh and that little adjustable wrench, unless it is branded as such, is NOT a Crescent wrench! Crescent is a brand of tools, not a type of tool! Great stuff as always, brother!

[@BestDamnEDC]

It is a Crescent brand wrench. Thanks for watching!

[@7duke77]

@@BestDamnEDC 😁