Betaflight 4.3 Setup for Whoops

[@olafschermann1592]

Cool you stepped up you game in terms of quality (lighting, greenscreen, background music) 👍

[@kevinthealienfpv]

Wow. To my knowledge, this is the first video of yours that I've watched. I've been flying whoops for a year now and I've very recently started trying to tune and modify past the pretty basic stuff and rate changes, but I realized that I had absolutely NO idea where to start and not many people cater to tuning whoops without BB. I nearly burned up my FC before I got a little help 😅 Anyway, queue you: dispensing figurative gold that rivals Bardwell and Rosser. Again, my FIRST time watching anything you've made. You earned a like, a subscription, AND a Patron in one go. Freaking bravo, guy.

[@uavtech]

Thanks for the support. :-)

[@kandredfpv]

Thanks so much for this guide Mark! I just got a BetaFPV 85 Pro 2 (ELRS version) and was able to really lock in an amazing tune following your instructions. Now this thing handles almost like a 5" quad and I'm totally loving ripping it around the house. You rock!🌟

[@deant6627]

I love my Eachine Trashcan, I installed the xt30 connector that it comes with, it is such a beast for its size. To powerful for indoor flying now but flys amazing outdoors.

[@olafschermann1592]

You can fly it indoors when you use a 1S battery. I bought 520mAh 1S for that reason.

[@rcrdps8144]

A throttle curve is key to indoor flying on 2s. I think I have like .5 at .3 throttle: kzbin.info/www/bejne/imqyXpZqgsyBj9E

[@KrotowX]

Pretty much straightforward tutorial - thank you! Like the idea about "FFT maximum" in OSD flight end screen. Seems very useful way how to know real vibration frequency in whoop FC's without flash memory for BF log. Should work for larger quad field tuning as well. Horizon mode is overstated IMHO. Flipping in small apartments works only as kid's entertainment for first few flights. Then it become boring. Flips an other acrobatics are big fun in Acro, but it require way larger space - outside or huge 2-story apartment or mansion type house.

[@chorchecze]

Well, I didn`t use a horizon at all and same for angle mode. Flying whoops in acro is much smoother and easier when you get use to then fighting against accelerometrer in angle mode.

[@KrotowX]

@@chorchecze Acro is the best, yes. However flying acro indoors require large rooms or very good reaction. I have neither.

[@chorchecze]

@@KrotowX Adjust your rates and expo. Fly acro indors is hard in beginning, but since you calm down you will be able to fly in tight spaces and even better than in Angle.

[@AZ-FPV]

This is great - thanks for your video - Do you have one for 4-inch quads like the Flywoo Explorer 4 LR ?? 🤘

[@b.w.oostdam8875]

TinyHawk-S: Sorted it out. Very good tutorial. But the PID loop recommendation at 4K is crucial. Flies very good. No CPU overclocking needed so far. Thank you

[@lukeiam0]

Amazing! I didnt know you had a website... ...with presents for whoops and toothpicks!!! Thank you! Cheers from the land of polar bears and flying hockey pucks.

[@PeterSpringhall]

excellent step by step - just what I needed - Many thanks

[@MCsCreations]

Awesome, Mark! Thanks a lot! 😃 Stay safe there with your family! 🖖😊

[@ghostdropfpv]

Hello, Great vids ! I have watched a couple of your video's now, trying to figure out what was going on with my whoop, I think I figured out the main issue. At times I still feel its kind of funny feeling though. its A mobula8 Analog BNF with a Frsky Receiver in D8 mode, in there config the "Averaging" is set to "OFF" and I'm just wondering if it would be worth trying "2 or 3 point averaging"? because you have mentioned it for Frsky in more then one of your vids. I can't seem to find much info about it for 4.3, thanks.

[@juliomagana3112]

Thank you I put the tubes and adjusted slightly on my Cetus x I put 48k because 96k is too weak and increased my flight time, on the meteor75 I put 96k and it gave me an extra minute of flight time compare to before

[@omu_fpv]

Dude!!! Just put the 4.3 1s whoop preset on my build and 🤯! I've been messing around with other peoples tunes here and there, but holy crap this preset makes my whoop feel like sim physics with how responsive it is to almost all my commands!! I've never felt this much control on a whoop irl! Keep up the good work! I noticed you didn't post a week 3 for igow😖 Hope to see you continue!!

[@uavtech]

AWESOME. I did, it was just a boring dive so i made Unlisted.

[@omu_fpv]

@@uavtech okay good! Lol I was a little worried for a min!

[@eugeneflorida1408]

What is the purpose of back ground music? At 74, I find it very distracting.😢😢😢 😢 Content is great

[@ericcoker8784]

After hitting subscribe, I found this!!!! I am turning off air mode on everything...except ACRO. Not on that level yet. Plus all the other stuff you mentioned. My question: why did I take soo long to find you????

[@sammarple9443]

Iv just been using a 2 s inside . A 3to4s outside with my whoop now I can just switch different pids on a switch wow thank u got to try it

[@billmcdonald4335]

Came across this yesterday. I've been flying in Angle mode for years, but did not know that pitch and roll rates do nada until now. It's true. After watching this, I tried all kinds of stuff with them on my daily driver, and nothing felt any different using the rates in the Rate Profiles tab. I was already using the Angle Strength to make my quad feel smoother [I'm down to 16 and it feels great], but did not know about the pitch_level_expo and roll_level_expo CLI settings. It turns out they're rateprofile dependent, so you can set up to six levels if you want. These CLI settings make a noticeable difference in the pitch and roll, and I'm in the process of finding my buttah zone. That's one of the things I really enjoy about this pastime: there's always something else to experiment with. I've flown the same platform for almost 5 years and it's evolved along with me. Everything I've tried has taught me more - even when I broke stuff. What I fly today is nothing like what came from the factory, even though the parts are almost all stock.

[@kubersoldaat]

Thanks man, this is the video I have been waiting for.

[@661FPV]

Oooh green screen mode unlocked! I like it!

[@AngryPepper1964]

Thanks so much for this video, super useful, I especially like how I can have different rates on a switch, I always had to hookup to BetaFlight to change them before, that was a p.I.t.a until now. Thanks again, you always have some amazing tutorials.

[@garrettkensler451]

I didn't see any info on how high kv motor you made this preset for. Is it generally for 18,000 kv? I say 18,000 because that seems to be standard mids on tinywhoop motors.

[@thfpv4974]

Thanks buddy appreciate what you do for the community 👍🏼

[@nikotttin]

I use demag high and motor timing high for 0802s... Also the initial power is ramped up

[@ra1nmaker001]

Great info source as always! Will you be updating the presets page on your website for 4.3? That would rock on top of the presets of BF 4.3 stable release!!

[@uavtech]

Yes, I will.

[@TinkerTweakFPV]

Nicely done tutorial! Appreciate the attention to detail. Let whoop season begin!!

[@jgrudnicki]

What adjustment would you suggest for a heavy DJI whoop like GEPRC Thinking P16? It's 95g with 3S battery with 1103 7650kv motors.

[@ClareFPV]

Awesome video Mark. Spot on for whoops.

[@pksteffen]

Great stuff as always! Cheers.

[@AGILISFPV]

Thanks for uploading this!

[@IvanEfimovLimon]

oh damn i gotta find my whoop now :)

[@baggszilla]

Awesome! Thanks Mark!

[@muchzill4]

FWIW: I was trying to figure out why the heck peak FFT wasn't showing on my post flight statistics. Turns out dynamic notch requires at least 2k pid loop, which is not default on new Diamond F4 with a Bosh gyro. It defaults to 1.6k. Furthermore, it seems that dynamic notch has no effect unless you crank the pid loop to 3.2k. Hope this helps somebody. 😉

[@omu_fpv]

Good to know! I'm trying to tune my diamond rn

[@imadabualia4843]

Thanks for the vid. My newly built 2s whoop draws too much current (constant 15a) with stock PID. I was only able to tame it down when I lowered D to 20 and applied D filter of 50hz. It ran fine on 1s, but when I used 2s, it’s just crazy current draw. Any thoughts? Thanks

[@tonhabraken9339]

Thanks for the video.. great info... You're mentioning using no averaging for elrs/ ghost, but the tuning notes (and presets) in BF are telling users to use 2 point averaging. Are the tuning notes on the 'safe' side? Or did something change? Thanks!

[@uavtech]

Safe-side. It will make a smoother FF signal (averaging), but the FF signal will be more delayed. I like no averaging but bump up smoothing. I need to do some work in comparing both.

[@Kapharnaum92]

Another great video!

[@HalfChrome]

Great video. Thanks for the info.

[@samaramediallc2341]

Really enjoy your in-depth explanations on tuning however sometimes I'm not able to make some of the suggested adjustments. I'm sure it's user error on my part but with each revision of Betaflight there always seems to be a slight learning curve on how to enable or disable certain features. When I was trying the adjust the Dynamic Notch Filter the max I could put in was 5, not the 200 you type in. My Betaflight screen shows the DNF as enable (yellow slider on) but I do not see the same on your screen, where would I get access to change that? TIA.

[@uavtech]

Make sure you are on BF 4.3 RC2 and have Configurator 10.8 RC2. That said, RC3 is coming out soon, so maybe wait a week.

[@Yaroslav_Tselovanskyi]

What's the point in having 3 differnt sliders for rate profile selection in Adjustments? It would do the same with just 1 slider

[@trajanfpv]

Great job as always.

[@ntorres1966]

Great video. Keep up the great content. At what time do you need to be in DFU/bootloader mode? I see that this wasn't the case for this whoop. Does it matter and if so when do you have to put FC in that mode? I am new at this hobby and just trying to learn. thanks Sir.

[@uavtech]

Just for flashing. The flight controller has core "DFU" firmware on it that never gets messed with. All firmware (FW) loads over it. So even if you flash new FW and it gets messed up (USB is.unplugged in the middle of the flash process), you can always reflash because the DFU core FW is intact. Think of the DFU firmware as the operating system and the FW as software loaded on it. Although in computer terms, a better analogy is DFU is the CMOS FW and Betaflight is.the operating system. Your PC has a core firmware in it called CMOS. It.is the first text you see when you turn it on and then the operating system loads to run the PC.

[@ntorres1966]

@@uavtech Thank you for this information and responding. Really appreciate it Sir.

[@DennisCamps]

Hello, Which preset would you recommend for a geprc Cinelog 25? Kind regards, Dennis

[@vedasticks]

i got a tinyhawk 1 with original board, the ne before they added cap to 3.3v rail to stop reciever brrownouts... flew fine with as it was. it is a second hand quad. upgraded to 4.2 ad esc with blheli m 16.9. it wouldnt arm. the fc was rebooting everytime i armed. had to dowgrade esc to get it working but 1 motor sometimes would struggle to start and sometimes when it did start it would be spinning wrong way. it will fly fine once motor on that motor is going and is right way but cant flip or rol as it just continues flippig doesnt correct the flip or roll. seems like desync, tried various settings....

[@uavtech]

If BrushLESS put a little 3-in-1 oil in the motor bushing and/or raise the Dshot Idle variable to 7 or 8%. See if that helps.

[@johnmcmurphy1007]

Hi Mark! Thank you for another great video! 👍 I would also really appreciate if you could update the presets to BF 4.3! 😎

[@olafschermann1592]

Filtering: when do you recommend RPM filtering and when dynamic notch? What is it dependent on? Quad size? BF version? CPU power? Or is RPM filtering not the way to go anyway/any more?

[@divingfalconfpv4602]

Think in video before he said not to use if could power is too high. Don't remember the number. Maybe 50%.. I like it on my whoops a lot I see long flights times. Where bigger quads not too much difference

[@uavtech]

Yeah, RPM + SDFT (50 bins) runs damn near 100% it seems (when RX is on) on an F411 at 4k.

[@arnaudlecomte4381]

Thanks for the tutorial. Well done> I will test that out !

[@larijoona]

F411 not fast enough for rpm filters ? You didn't elaborate on why you picked the "regular" dynamic filters over them.

[@uavtech]

Yeah, RPM + Dyn Notch on F411 at 4k loop rate is pushing it with Serial port active (transmitter turned on and RX connected).

[@EvaTheDivarobloxplays]

Overclock it to 120

[@KrotowX]

FYI: Seems built-in SPI receiver support for whoop FC boards is now disabled in Betaflight 4.3. They simply doesn't bind in 4.3. At this week found that CrazyBee F4 Pro V2 FC with FrSky compatible SPI receiver in FrSky D8 mode after BF 4.3 flashing is not able to bind neither in FrSky D / D8 nor in FrSky X / D16 mode. Tried with Taranis Q X7 ACCST, TBS Tango 2 with multimodule and Jumper T-Lite radios without success. Reluctantly flashed FC back to BF 4.2.11 and tried to bind with all mentioned radios/modules - now they both bound successfully on first try. Weird.

[@uavtech]

Report

[@KrotowX]

@@uavtech Betaflight issue #11125. Someone fixed that at yesterday. Checked 20 minutes ago via development artifacts - SPI bind now works for both D8 and D16. Hope that BF team will include this fix in next preview build.

[@dankusmemus2350]

@@KrotowX It isn't fixed for me, it binds ok but then it intermittently cuts in and out and completely loses connection randomly in the same room. What version are you flying with your SPI Frsky?

[@KrotowX]

​@@dankusmemus2350 I tested it just before Christmas with nightly Betaflight 4.3 development preview for STM32F411 target and added CRAZYBEEF4FR config file over it. I see that fix is merged in master - should present in Betaflight 4.3 Release Candidate 1 too. Can you update Betaflight 4.3 in your FC now and test again? FYI: BF devs merged this fix under issue #11129. I will try to get a time for that at this evening too.

[@robi5722]

5 STARS for the "don't be ashamed to fly Angle indoor"... 👏👏👏👏👏

[@KrotowX]

Sane conclusion. Flying Acro indoors require huge covered space. Usual homes and apartments are simply too small for that.

[@mrpink4231]

why use angle? i mean. cant u fly indoor with acro? doesnt mean you have to do ACRObatics? check my last video on the playground. i fly the same indoor. not allowed to post online - says my wifey because my kiddo is on the tape :D

[@mrpink4231]

@@KrotowX why you need HUGE space? dont get that. its a whoop. more cam angle and then PUSH IT.

[@KrotowX]

@@mrpink4231 And smash it. Been there, did that.

[@mrpink4231]

@@KrotowX kzbin.info/www/bejne/qHaYlJV8h99nf6M

[@TiphysFPV]

Hi Mark, would the UAV preset tune on 4.3 for a 5” work with blheli_s running bluejay? Or is that not a factor as long as my settings are good for this size freestyle quadcopter?

[@uavtech]

They work with any ESC firmware.

[@JALFPV]

I’m really liking BF4.3. I’ve followed your whoop tune and def notice it flies better than it had. One issue I’m still having is that I’m not getting CRSFv3. I’m running Tracer 6.10, OpenTX 2.3.14, BF 4.3. As I understand it, that should work. Any ideas why I’m still seeing CRSFShot? Also what is the 2pt averaging? That’s new to 4.3 and there isn’t an explanation.

[@KrotowX]

2pt averaging help to avoid control jitter for some radios when gyro lowpass 2 filter is off. Particularly FrSky radios may need it.

[@CallistoFPV]

In adjustments if you just highlight the whole range for aux 2, you don't need 3 sets with each position, just one 😁

[@markcooper6057]

Also, if you use Redpine protocol, note that you will only get access to profiles 1 & 3

[@FlyingRun]

I cant find the way to flash my esc on my bumblebee hd V2, Maybe the esc is not compatible with esc configurator, i have layout error messages on the configurator when trying to read setup. The esc are flashed on bheli 32. Thanks for our awesome contents and precious tips.

[@uavtech]

Using the BLHeli_32 configurator?

[@FlyingRun]

@@uavtech using esc configurator. With bheli 32 it works

[@dankusmemus2350]

I couldn't even get past the first part, it would fail to connect to the serial port when attempting to update, but it can read my config and everything fine... I'm using the exact same CrazybeeF4FR as well originally out of a UZ80 but in a Mobula 7 frame.

[@dankusmemus2350]

Problem solved with ImpulseRC driver fixer

[@rckyfpv]

Hi! I get wobbles on the pitch axis while crusig. What do you think I should change to get rid of it?

[@junglistfpv8553]

Looks great. Tho I really dislike that the esc configurator is an online thing.

[@uavtech]

Why? It is easy.

[@pjd.99]

What is your max load for a “tasks” check when running 8K/4K with accelerometer? I have a BetaFPV Meteor75 with a F4 and running 8K/2.67K with no accelerometer and it maxes at 99 when sitting plugged in via USB. Am I okay to turn up my loop and use the accelerometer or is a max load above 100% not good?

[@uavtech]

It can be ok, but not ideal. Give it a go. It will miss tasks, but maybe won't have switches that you can tell.

[@pjd.99]

@@uavtech Will give it a shot. Thanks for the response. Fly safe and happy whooping!

[@VarNino_Fpv]

Can i applied it to 3 inch whoop like taycan ?

[@MrDeathFPV]

Thinking of making the jump from emu 0.3.4 to bf 4.3 for my Tinyhawk 2, do the emuflight pids translate the same to betaflight 4.3 at this time? I have a tune I'm really happy with on emu using 2s with 75 percent motor KV limit

[@uavtech]

Yes, they are the same (PIDs).

[@Blacksquadron]

If I'm running emu 0.3.5 on my mob6 is there a reason to bump back to Betaflight 4.3? Running 19000kvs indoor only right now at stock emu pids and I love how it handles.

[@uavtech]

Either is good for whoops.

[@Dad_with_a_drone]

i liked this vid

[@muggachukka1629]

subbed!

[@carcomp101]

The 4.3 release notes say "don't load any diff or dump from any other version", yet you do just that at the beginning. Why?

[@uavtech]

Because if it doesn't accept a variable, you just get the default.

[@DinGuSco]

What is the best way to make it take off lower in the throttle range please? Im at like 50% for take off on my mob 6 ELRS

[@uavtech]

You could tweak your throttle curve in OpenTX or get bigger motors.

[@mrpink4231]

@@uavtech or cut weight

[@justhackitfpv]

I'm using JESC is it time to move onto Bluejay or Blheli M which one will you recommend?

[@uavtech]

Any of them work well. But JESC or BlueJay are the two now-a-days.

[@justhackitfpv]

@@uavtech I think JESC is most stable one? I remember Joe fixed many bootloader issue of Blheli_s

[@JC-qy6cx]

Would you have 2 point averaging for redpine?

[@uavtech]

I try to avoid. Add more FF Smoothing over 2P Averaging if you need it.

[@JC-qy6cx]

@@uavtech I tried with 2 point averaging but the quad was unflyable the controls would seeming be at 1 second intervals. Meaning the input would drop out for half a second then kick back in. I removed 2 point averaging and it flew amazingly

[@IBKingFPV]

have they fixed the spi d8 yet? last I knew d8 spi doesn't work with betaflight 4.3.

[@uavtech]

Unknown. I don't have any SPI receivers. :-(

[@IBKingFPV]

@@uavtech Thanks for the reply Mark, and all the great info. I made a post on their FB group. Not sure if the devs know about it yet or not, but as it's prerelease I just rolled back and figure they will get it when they get it. Thanks again. 🙂

[@verdi6092]

Does this apply to 2.5 cinewhoop with auw 320grams?

[@uavtech]

Yes

[@Maorifpv]

i have high cpu usage on my whoop with bf 4.3. im using dsshot 300 8k/4k without rp filter

[@uavtech]

If less than 85% on 4.3, it is fine.

[@janengelen1978]

I updated my whoop to 4.3 today. But after the update i have an issue when i arm the whoop. the rx just cuts out. It happens only when i arm the quad, it doens't matter which aux i use. The signal is stable untill i arm, in the BFconfigurator i can see the other channels just drop to minimum and sometimes they jump back up. any ideas. cheerz.

[@janengelen1978]

went back to default settings, still the same issue. back to 4.2.11 and working fine. FC is a crazybeef4fr frsky

[@uavtech]

That's weird. Which nightly build?

[@janengelen1978]

@@uavtech the same as you used in your video. Tried to flash it again and same issue. in tasks i see the RX rate goes down from 110hz to 15hz when arming the quad.

[@dankusmemus2350]

@@janengelen1978 I found then same thing, guess I'm going back to 4.2.11

[@mportillo78]

Does this stuff still apply to brushed whoops?

[@uavtech]

Yes.

[@housinit]

Anyone know why my ability to change PID and Rate profiles is grayed out? I can change the settings, but can only set up one profile. Driving me nuts. I'm using the very latest nightly of 4.3.

[@uavtech]

Click on the tab a change Profile first.

[@housinit]

@@uavtech Well, I thought I was being stupid or something so I tried clicking ALL over the place and still can't get the profile selection drop down to not be grayed out. Thought maybe it was the nightly of the configurator, but I can change profiles on other quads that aren't on 4.3 just fine with the nightly configurator. Maybe it's just this target, MatekF411. I also tried changing to the nightly you use in this video for the firmware. Nada. So weird. I wonder if it has something to do with the fact that I had to use a pull up resistor on my ELRS receiver for this board because the FC was putting the receiver into boot mode. Anyway, whatever. No biggie. Another issue i'm having is getting the BF LUA to work on 4.3. Finally got it to get past Betaflight Config initializing the LUA, but then just sits at "downloading board info." All of these issues are resolved if I just go back to 4.2.3. I'm sure it will all get resolved in 4.3 eventually. Thank you Mark for all the work you do. BTW, I was able to fix one of the iFlight AIO's you sent me a long while back, but never used it. Maybe one day i'll stick it in something I'm not too attached to since I still dont trust that batch of FC's.

[@housinit]

@@uavtech 4.3 RC1 resolved all of my issues and then some! Even made it so I could remove my pull up resistor I had to use for ELRS. Thanks for all you do man!

[@CINELYFT]

My PID´s dont move when i move the sliders? any suggestions?

[@uavtech]

Turn on Expert Mode maybe? Outside "non-expert" safety range? Latest BF Nightly to pare with latest Configurator Nightly?

[@CINELYFT]

@@uavtech I turned expert mode on… I installed the version u told me to and downloaded bf configurator from your website. It’s grey and all the filters too. Need to turn on. After hitting save it turns they again and resets.:/

[@howitsdone5096]

Hello I am having a lot of bugs with the new configurator. Using windows 8.1. It wont reboot when you hit save and reboot. I need to hit save reboot then hit disconnect twice then unplug the quads usb then replug in the quad then hit connect. Everytime I need to save I have to do this process. The configurator will not recognize the quad if the app is allready running. I have to plug the quad into the computer first then start the app. If the app is all ready running then it wont recognize the quad. Then I can see my CPU usage swing from 10% to 100% up and down. The old configurator would hold it at 7%. A lot of bugs that I have seen nobody else talk about.

[@uavtech]

Sounds like it is isolated to your PC or pairing with Win8.1. I think it only supports Win10 and up right now. I know I had to get off Win7 for similar reasons. Not those, but USB connection weariness.

[@TimeFadesMemoryLasts]

Have you checked that your USB cable is not broken? Have you tried using another one? The CPU usage number now displays a more representative number of the real CPU usage. It was wrong on previous BF versions. It will be improved once again to make the number even more representative afaik, so this is going to get fixed.

[@howitsdone5096]

@@uavtech Thank you for your reply. The thing I might be seeing is that everyone else is using windows 10? It does seem like a driver or something. Same computer works perfectly on the previous configurator. USB cable is working properly. Thanks for your vids!

[@howitsdone5096]

@@TimeFadesMemoryLasts Thanks for your reply. Yes cable is working properly. Is everyone on new os? I run a gaming computer with windows 8.1. I think the old os is the problem. I have flown on BF 4.3 twice now and I am liking it. Quad flies great.

[@divingfalconfpv4602]

my sliders dont match those.. matek411.. and P&D gain only moves up and down P&I gains.. i cant move up P&D easily. I have to like raise master and lower I and FF lol

[@uavtech]

:-) There is no PD Gain slider in 4.3.

[@divingfalconfpv4602]

@@uavtech there was some issues. I'm try on another quad. Though config worked on 4.2.9 I'm re-download 10.8 again too kzbin.info/www/bejne/favcmWBte9l7e5Y

[@uavtech]

@@divingfalconfpv4602 , correct. You have an old 10.8 nightly build. Tip off is PIDs should be dimmed on latest nightly.

[@divingfalconfpv4602]

@@uavtech thank you. So it is the configurator. I'll re-download. I downloaded it first time I tried. Long while ago

[@uavtech]

Grab the one i have linked in the description.

[@jeb3078]

are these settings good for both 1s or 2s?

[@uavtech]

Yes

[@fuleo]

It's nick burns season.

[@lunaticfpv17]

Not way It's whoop season yet, I only just got my LR 7" airborne again

[@robi5722]

Just a kind request from not english mother tongue speakers... and perhaps with not super ears like me 😉... could you remove background music or keep it lower? Thanks 👍

[@beezermedia]

You can always turn on cc on most videos. Yes the auto detection isn't perfect but it's something