Big Bear Wood Chipper Shredder BBC72 Assembly And First Use

Big Bear Wood Chipper Shredder BBC72 Assembly And First Use. OUR SOLAR EQUIPMENT......CLICK HERE: www.signatures... COUPON CODE for $50 off: Countryliving12
HARVEST RIGHT FREEZE DRYER: affiliates.har...
GROWERS SOLUTION: growerssolutio... DISCOUNT CODE: CountryLiving10
HENGEAR: hengear.com/?r... Coupon Code: countryliving15
SEEDTIME: seedtime.us/jk... ($5 in FREE seeds)
Big Bear Chipper: homedepot.sjv....
Solar and Electrical Equipment:
EG4 6000xp Split Phase Inverter: signaturesolar...
Victron Multiplus 2: signaturesolar...
Victron Smartsolar MPPT: signaturesolar...
Victron Cerbo GX Comms Hub: signaturesolar...
Victron Cerbo Touch 50: signaturesolar...
Victron GX Touch Wall Mount: amzn.to/3ruaXR7
Victron Lynx Distributor: signaturesolar...
Mini Rail Roof Mount: signaturesolar...
Solar panel rail clamp: signaturesolar...
EG4 6500ex Off-Grid Inverter signaturesolar...
EG4-LL LiFePo4 Batteries: signaturesolar...
Growatt SPF 5000 US Off Grid Inverter: signaturesolar...
IMO PV Disconnect Box: signaturesolar...
Nader 200Amp Breaker: signaturesolar...
Growatt Transformer: signaturesolar...
12 position electrical sub panel: amzn.to/3DVKZpZ
4 gauge THHN wire: amzn.to/3pYrXuB
4/0 and 2/0 Battery Cable: amzn.to/3QXfZgy
Copper Battery Ring Terminals: amzn.to/3CLRK0y
70 amp double pole breaker: amzn.to/3AvMVWp
Safety switch: amzn.to/3FXCkHO
conduit as needed
Simpson Flip Toggle mounting hardware: amzn.to/47AFhtw
Ticonn IP67 Electrical Box: amzn.to/3YBFKHX
Dinkel Terminal Blocks: amzn.to/3QMq6Yj
DIN rails: amzn.to/3OxbpFS
Hardie backer board
Pike Industries Bus Bar: amzn.to/3R3bSzs
EG4 Brightmount Rack: signaturesolar...
Parts list:
1 1/2" conduit
90° conduit elbows: amzn.to/3qL33Tm
conduit LB boxes: amzn.to/45SEWAR
conduit threaded connectors: amzn.to/3OTCbZc
lock nuts: amzn.to/3P3bCAO
thread protectors
Conduit weatherhead: amzn.to/3L61WnV
Conduit straps: amzn.to/45S6iHf
grounding rod: amzn.to/3LspxzF
ground rod clamp: amzn.to/47Yzi1O
sub panel: amzn.to/3DVKZpZ
AC breakers: amzn.to/3AvMVWp
Safety disconnect switch: amzn.to/3FXCkHO
Grounding bar: amzn.to/3LspDY3
Neutral Lugs: amzn.to/45U4Iog
Ring terminals: amzn.to/3EfLRGK
Ferrule Kit: amzn.to/3sCgh5p
PVC Electrical Glue: amzn.to/3OWoLvz
1/2" flexible conduit: amzn.to/45OyXNt
Liquid tight conduit connectors: amzn.to/45OyXNt
Distribution protection box: amzn.to/3P2t7Bq
Dinrail: amzn.to/3OxbpFS
Dinkel terminal blocks: amzn.to/3QMq6Yj
DC breakers: amzn.to/3L4iPQ0
Surge protection device: amzn.to/3qTDuPQ
Combiner box: amzn.to/3YBFKHX
Solar inline fuses: amzn.to/3PnRZVK
Flip toggle mounting hardware: amzn.to/47AFhtw
MC4 connectors: amzn.to/3qWiW9s
WIRE! : amzn.to/3pYrXuB and amzn.to/3QXfZgy
All links are affiliate links that we earn a commission from. There is no extra charge for you at all but it helps support our channel.

[@Tom-fz6pe]

For the size and price, this chipper can’t be beat. I bought one; not disappointed.

[@CountryLivingExperience]

Awesome. I agree.

[@danwilkening888]

That thing is a beast! For the price it looks to be very cost effective for what it can do.

[@CountryLivingExperience]

It is extremely powerful. I am liking it a lot.

[@michaeldezelar6264]

I have the BBC62. I've found it easiest to fill the fuel tank by swinging the chip chute open... (I use a bungee cord to keep it from swinging back at me) then I can stand on the Y of the tow bar to more easily reach with the gas can, see what I'm doing and not spill. I also assembled mine solo!

[@CountryLivingExperience]

Awesome! Thank you for the tip. That makes sense. Glad you got yours together by yourself too.

[@draperone371]

Holy moly, that is a mighty big chipper! Thank you ❤ 😊

[@CountryLivingExperience]

It sure is. I can finally chip the big stuff I have laying around.

[@draperone371]

@CountryLivingExperience remind to stay on your good side, 😆

[@WillianGarciaDiaz]

Thanks for the video mine is getting home tomorrow Very helpful 🙏🙏

[@CountryLivingExperience]

You're welcome.

[@danbarron8072]

This country needs more wood chippers.

[@kevinsconcealment870]

Dang, beaten to it by a day..... Yes that comes to mind quickly when you see a video on wood chippers, though I myself favor something I call "The Barge".

[@Merlion909]

Congrats on the addition to another equipment on your homestead, that chipper really looks big and does a nice job. By the way, love your cool style of tucking your pants into those cowboy boots 😉

[@CountryLivingExperience]

Thanks

[@dr3406]

💕💗💕🙏🙏🙏 Have a blessed day 💕💗💕

[@Doc1855]

We don’t chip our wood, but we do add it to the bottoms of our raised garden beds or into our compost pile. My wife LOVES roses, so a few years ago I devoted a 4 large raised beds to plant 4 climbing rose bushes against one of our rock retaining walls and 4 rose bushes on the next tear down. I put large branches of Douglas Fir in the bottom of the 4 raised beds and added Topsoil to fill the beds. This year our 8 rose climbing and bushes have gone crazy. I’ve also planted Rose Trees this year on the 3rd tear down, but planted them with Topsoil only, so it’ll be interesting to see how well they do. We put down commercial grade weed barrier in different areas around our property and drove up on a portion of the WA BDR where they have harvested a few acres of Douglas Fir trees and taken the bark off. It’s free bark, so we’ve loaded our truck a few times to cover the weed barrier. I must admit that the bark doesn’t look as good as what you buy from Home Depot, but it’s free and we live in the country so it really doesn’t matter to us.

[@CountryLivingExperience]

Free bark is great. I wish that was available around here. It is a valuable commodity.

[@rickthelian2215]

Remember that’s dry wood it would be easier to use when the wood is fresh and green😊 Nice size chipper😊

[@CountryLivingExperience]

Thanks. Yea, I have a ton of dry stuff laying around. Hopefully I will make it through all of it soon before I have any green stuff that needs chipping.

[@rg1599]

I’m glad you got that. My choice was the Woodland Mills 3 point chipper. Up front advantages are one less engine to maintain and four less tires to potentially go flat. I think it was easier to assemble. Thanks for the review.

[@CountryLivingExperience]

You’re welcome. It was honestly a toss up. I looked at that woodland mills and almost got one.

[@jdollar5852]

We use a PTO chipper. All of them will bog down and struggle with dry, rotten wood. We make 100% of our garden soil with wood chips as well as mulch for our fruit trees. The soil takes at least a year but it's worth it. I like that chipper but the gasoline engine, and a few of the design flaws you mentioned, make me glad mine is a PTO

[@CountryLivingExperience]

Awesome. The chips are very valuable for sure. It was such a close decision for us between it and the pto chipper.

[@elijahrodgers416]

That looks like a good chipper!

[@CountryLivingExperience]

Good so far

[@toddpavlus4975]

Just got the 6 inch one. Love it. Question, does the hour meter wire get stripped and inserted into the spark plug wire? Direction didn't seem that clear

[@CountryLivingExperience]

Cool. Not sure. I did not connect the hour meter.

[@highlandmary33]

But how does it handle a Fargo Femur???

[@raydeese4439]

You will miss it as soon as something goes wrong, that thing speeds up composting at least by 4 or 5 times faster than normal

[@CountryLivingExperience]

Hopefully it will work well for many years.

[@benkanobe7500]

Thank you. I wish you would have said what that wood was - Pine, Oak, cedar, .......... makes a big difference what will go through it. I don't want to duplicate another motor on my property because it is hard enough in CA due to ethanol in everything. I can not go a year without something needing a carb rebuild due to ethanol (yes, I take all the proper precautions we have been dealing with this crap longer than any other state in the union). So I would like to use my tractor's PTO (28 HP) to spin a chipper that is strong like yours. What do you recommend?

[@CountryLivingExperience]

It was sweetgum and pine that I was chipping. Both dry so much harder than normal. For a PTO chipper, I was looking at a Woodland Mills. They seemed to be the most reasonably priced.

[@kcjilly2515]

Nice chipper. The chips are always nice when the blades are new, but in time it will look like the stuff you get from Chipdrop. Appreciate the reviews though. Sure gotta be careful around the feed end of those guys.

[@KenthGustafsson300]

Did you test the angle on the outblow to get higher?... on that blow angle you had it been difficult load a trailer or truck not to spill to the outside.

[@CountryLivingExperience]

I didn’t test that. It will angle much higher than what I had it set at.

[@rowenadinsmore1]

Why not attach the wheels and toe fame first?

[@CountryLivingExperience]

I followed the instructions.

[@rowenadinsmore1]

@@CountryLivingExperience But would it work if you do the wheels and toe frame first? Would you still have the issue of having to balance the chipper while putting it together? I was just wondering since I might get one and I want to assemble it with less issue of having to balance it.

[@CountryLivingExperience]

@@rowenadinsmore1 I honestly don't know. Since I had never assembled one before, I just followed their instructions.

[@alandust2188]

Out of my price range.

[@user-db5im9oh9r]

Please Please don’t use your hands while pushing the logs in. Peace and Blessings!