BMW E38 How to replace front windscreen and side shadow line seals 740i 750i 735i 728i m60 m62 m62tu

[@frankiezzi5815]

Didn't realize that there was a seal that ran along the roof above the doors! Where did you source them?

[@TheKeenMechanic]

Hi You will find the contact details for the supplier of the seals in the video. Thanks

[@marcusrowe2895]

Another excellent professional video. Thank you.

[@TheKeenMechanic]

Thank you Marcus. Appreciate your support🤝

[@dbkillerx3331]

Excellent video , very informative

[@TheKeenMechanic]

Thank you. Glad you like it

[@ozzdunn9034]

great job and thank you

[@TheKeenMechanic]

You are welcome

[@sinamardani8771]

What are the part numbers for molding on the roof like u changed?

[@TheKeenMechanic]

@@sinamardani8771 look up realoem.com

[@sinamardani8771]

@@TheKeenMechanic I tried and couldn’t find it

[@DCRband]

I wish you could've opened the door a few times to see if the rubber seals come off. Doesn't the rear doors have a trim with the rubber seal that cover the last 24 inch of the rear door trim space?

[@TheKeenMechanic]

Hi buddy. No issues at all as the shadowline trim seal is above the door frame. This is better than the original in my opinion🤝

[@juliangeorg7698]

@@TheKeenMechanic What is the BMW part no. for that seal?

[@TheKeenMechanic]

@@juliangeorg7698 Look it up on Realoem.com with your vin🤝

[@frankiezzi5815]

Why do you not have the staggered wheel layout?

[@TheKeenMechanic]

I do. Why do you think I don't?

[@frankiezzi5815]

@@TheKeenMechanic Those rear rims do not look as wide as they should

[@TheKeenMechanic]

@@frankiezzi5815 The rears are 9.5j and front are 8j. Not sure why they don't look staggered but they are. Front tyres are 235 and rear 265. These are a Genuine BMW set from E38 sport model. The only thing I did is to refurbish them and fully respray them but I did not like the polished lip and got them painted in titansilber to match the car at the time I fully resprayed it

[@capnmoench4246]

If you slop the upper windscreen seal up with dish soap / water, nice and greasy, it pops in with no tools and a little pressure..

[@TheKeenMechanic]

Yes, I figured that out later as I started with it dry then WD40 did the job but I thought washing up liquid might do the same job. Thanks for watching and for your time to leave a comment🤝

[@GibbaTheDoctor]

Thank you for video , where can i buy this ?

[@TheKeenMechanic]

Hi Contact the guy on facebook. I left his details in the video

[@salopian4037]

Just subscribed. Been watching a few of your videos and found them very useful. At the moment I have a faulty injector on my Skoda Fabia 1.6tdi and have been watching your video from a while back on how to replace them. Can you help me with the Delphi program that you used to code the injector afterwards? What version do I need - my car is 2014 Mk2 - and is there a free version I can download?

[@TheKeenMechanic]

Hi and thanks for subscribing to my channel, this means a lot🤜🤛 Regarding the delphi software it is difficult to find as Delphi take it down from ebay due to copyrights. It is even more difficult to find the interface cable. You might be better investing in a new tool from some of the popular brands like Autel or other brands. Hope you get sorted and thanks once again🤝

[@salopian4037]

@@TheKeenMechanic Thank you for your reply. The Autel tool looks to be almost £500, which for this one--off job is way too much. I was looking for some free software to download to my laptop.

[@salopian4037]

What would be the consequences of not coding the injector to the ECU?

[@TheKeenMechanic]

@@salopian4037 Short term probably hardly noticeable but long term may cause an issue. In my video I explain in detail what coding is and why we do it. It is like fine tuning

[@salopian4037]

@@TheKeenMechanic Thank you once again, you are very helpful.

[@reneplemml8326]

That is not Original on the left and right side

[@TheKeenMechanic]

No, it is not but it looks really well. Not sure why BMW didn't put a seal there. I really like the look of it now. Hope you like the video and thanks for your message