BMW F10/F11 Rear Differential Bushings Replacement, Stop Vibration!

If your F10/F11 also has vibrations on the chassis around the 90 -110km/h area, it is most likely the rear differential bushings...
Intuit256 di Kevin MacLeod è un brano concesso in uso tramite licenza Creative Commons Attribution 4.0. creativecommons.org/licenses/...

[@LHASMJ1610]

Interesting - I have the same annoying vibrations. Love the update , keep up the good work with the videos, love them

[@ericvidal2885]

Thanks for sharing this DIY!👍 Good job.

[@markopeshikj6924]

Perfectly explained step by step procedure. 👊

[@JavierMorales-lf8ti]

Gracias por el video. Estoy loco por encontrar la solución definitiva a las ligeras vibraciones de mi BMW F11.

[@leberkassemmel3836]

Thanks. Very good video.

[@2Drezik]

nice job

[@tolgahanbaransel2463]

amazing video, identified :) too much drift burnout after change bushing :)

[@russdavies1782]

Replaced all three bushes on my F10, as well as the rear propshaft doughnut (showing signs of cracking). Vibration still there 😞. I'm still glad I did it, the original bushes were sloppy after 13 years and 120k miles. There's enough clearance to do this using drive up wheel ramps. Getting the old bushes out is the worst bit.

[@iAlwaysSpeakTheTruth]

The driveshaft is what causes f10s to vibrate. Need to be replaced.

[@laizyksniega]

Same here...

[@laizyksniega]

​@@iAlwaysSpeakTheTruth vibration is not constant. Sometimes it doesn't vibrate at that range of speed. Sometimes vibrates. Sometime a lot. Sometimes just little bit. It's strange vibration. I think if it would be driveshaft ir will be constant vibration at those speeds ?

[@dandrixxx]

not saying will be the same to you, but for me the propshaft mount was gone. I still have vibrations but that is because by the time I got to replace it, the propshaft mount bearing had gone completely and has now most likely caused propshaft doughnut to break. I'm replacing doughtnut as well as diff bushes and diff front seal next week (as it is leaking fluid )

[@busterscrugs]

Have you found the cause of the vibrations? My F10 shakes pretty badly on the highway.

[@valefur72]

Ciao Francesco, senza smontare tutto, pensi sia possibile irrigidire i silent block con dell'adesivo tecnico?

[@diegoberton74]

Ciao Francesco, una vibrazione in frenata secondo te? Dischi andati?

[@superspeeder]

Another great video!!! My F10 is at 110k kms and this looks like an excellent preventative maintenance item. How many kms on your car when you noticed the rear bushing was cracked? I need to replace my DEF line so I need to get the car lifted up anyway.

[@FAL654]

Salutari la dvs cum se manifestau aceste vibratii? La mine vibreaza intermitent

[@micr75i]

ho fortissime vibrazioni anche io sulla mia F10, roba da uscire di testa. Ho fatto vedere il tuo video al meccanico e mi ha ordinato subito questi pezzi. Ma dove trovi tutte queste info? Manuale officina? grazie!

[@stayer85]

Solve the problem?

[@micr75i]

​@@stayer85yes it was the wheels! the alloy wheels had lost their shape and were causing vibrations. They were restored by a specialised company for 200 euros each.

[@jarpen3]

Hard bushes more vibrations 😅

[@gherghelgabriel8552]

CIAO . Ho un problema. Per favore potete aiutarmi. Ho una 730d, G11.L'auto vibra, ma solo da 70km-120km e poi sembra scomparire. Grazie!

[@FAL654]

Salut , ai gasit cauza?

[@iAlwaysSpeakTheTruth]

I have floorboard shaking/front end vibration from 60-80mph does this cause it?

[@laizyksniega]

I have same problem. Recently changed propshaft coupling bush. And all diff bushes. Main one was cracked. Vibration is still there. So not only that can cause it. This is my 4th ( 5 series bmw with same issue).

[@iAlwaysSpeakTheTruth]

@@laizyksnieganice lol I’m getting a g30 next

[@FAL654]

Salut, ai gasit cauza ?

[@stayer85]

@@laizyksniegaall of these 4 are F10?

[@sefamostar5755]

Hej Francesco how can I contakt you. I'm from Denmark

[@luskimarli]

Lige nysgerrig. Hvilken bil har du, og vibrere den meget?

[@johnmichaeltwist5086]

Stupid annoying music

[@James0788]

Got the name or part number for the extractor tool?