Holley Efi scramble boost on bump button

[@hdcaprice]

We need a nitrous Devin Vanderhoof to show us how to incorporate multiple dry systems with different ways of ramping the nitrous in lol. Watching all this boosted stuff is pretty cool tho 😎

[@shorty808100]

Best way to run NoS wether it’s a wet or dry system is pick a single stage of whatever HP you want and just spray that, multi staged systems are nothing but problems

[@Thehouseofboost]

Cool, I’m going to be doing something similar but I going to use the button to activate my parachute CO2 valve.

[@theholleyefiguy]

im using the ecu timer and the yaw from the vps made a video on that as well

[@eddierivera8910]

Very Informative 👍 thank you.

[@HaZe_Da_PiTBuLL]

Thanks I was wondering how turbo cars had a scramble button

[@BOOSTANGRACING]

@devinvanderhoof having some trouble wiring up transbrake to work with bump/scramble I have it all hooked up what I though was right but have no transbreak. I’m on v6 b220. May see if you could help me figure it out. Thanks sir!

[@theholleyefiguy]

did you program the bump output

[@FadetoBlack1463]

Excellent video still.. Devin can you do a video on how to set up closed loop boost control with Co2?

[@HaZe_Da_PiTBuLL]

Scramble buttons are for street racing where the surface can’t take all the power so you can at it on the big end as opposed to pre loading in you setup

[@theholleyefiguy]

street racing the starting line is alot better than half track

[@HaZe_Da_PiTBuLL]

@@theholleyefiguy but the finish line isn’t

[@theholleyefiguy]

the surface is what im referring to. applying alot of power mid track is typically disaster waiting to happen

[@slopoke22]

Lol good video man

[@ccracingengines]

Devin we have a Davis bump box on a HP is there a way to make this work using the Davis bump Box? Thanks Carlo

[@harperjmichael]

Cars might as well drive themselves. Have class rules caught up with technology? Is there any class that requires the driver to be the one who has to drive for the track conditions and not the ecu?

[@txslugga06]

My duty cycle says -100%. I’ve tried testing it with key “on” and launch button with the scramble activated but I don’t hear the solenoid fluttering. Any way to test the solenoid so I can hear it?

[@lonestarperformancefilms2707]

Is there a way to do this on a terminator x setup?

[@scrappyclappedoutfoxbody4174]

Wondering this also

[@turbovicsatx2910]

This will work in the terminater x ?

[@gregcochran5694]

Does the 1d table turn off the scramble once you let off the button say at the end of the run or if it gets loose down track?

[@theholleyefiguy]

if you program it to then yes

[@nickhurst1002]

What if wanna wire scramble on completely separate button

[@theholleyefiguy]

then do it