The New Engine Management For The Mr2! (Most Advanced System Yet)

[@PFIBrent]

Kyle and Wyatt crushin it out here !! Let’s go boiz!

[@TheSheldonbroderick]

Let's get it done for Midwest drag week

[@KU-wf6bj]

Congratulations on the new set of wheels!

[@jayrodz3122]

Y'all are killing it to Brent shout out from Fresno California when I'm done building one of my cars I'll b hitting u up 👆 I'm only 15 hours away 👍

[@kylestrayer8356]

I've been waiting for you guys to do a CRV bild any tipe whether it be off road rig or a drag car

[@ianb415]

Kyle and Brent both deserve the million subs sooner than later! Great content from both channels!

[@KSRPerformanceFabrication]

Yay for DATA!!!!! BTW, you want some serious tabs for that weight bar. Those nutserts will rip out when you have another wheelie.

[@jooka2010]

When this man gives you fabrication advice you should probably listen 😅.

[@JamesWebbFitness]

Everytime they said data I heard Kevin saying it lol

[@v0idlike]

How did I know Kevin was gonna show up on this after reading the title lmao

[@michaelbarse6398]

My man doesn't disappoint. Lol

[@randallmason9687]

I bet Kevin has a Data tattoo on His arm! Probably flexing right now!!

[@AndersonDick]

So cool to see FuelTech there! Thank you!

[@misquece]

Muito orgulho dessa marca

[@jrfuraerjr]

Nem sei como cai aqui , mas se tem FuelTech tamo junto !!

[@Jeca_Tatu]

Olha o Andersão ai, só atento no q os gringos tão usando kkk 💪🇧🇷

[@faguti]

O que o Anderson nos indica estamos com ele kkkk, e vamos nos comentários em português no canal dos gringos ✌🏾

[@igormelo5318]

🇧🇷

[@mrben522]

Bubble wrap popping intermission really saved the day there, I was about to bail on the video but that reeled me right back in.

[@von...]

yeah he's a good fabricator... but everyone & their mom has built a tube-chassis race truck. But did you see that one handed bubble wrap popping technique? Absolute pro; Second to none.

[@sillyone4696]

Lol

[@Danger-Dave]

Squirrel !! >>>>>>>>

[@mikeymerrett]

😂

[@turbogarage4889]

Living the dream, from a young kid street racing random people, to a grown man breaking records and building insane cars. Cheers to you Kyle, thanks for all the inspiration.

[@Noneyurbusiness]

I don't know if I would go as far as to be calling him a grown man

[@caseypetit2011]

@@Noneyurbusiness he's accomplished more then most grown men

[@calebkinghorne9469]

Perfectly said

[@Hollandaze-kl4kl]

💯

[@indigrace6584]

Men aren't fully grown until 27-30....but I'd say he's a young man, who's becoming very accomplished..props to him❤️.

[@mindkrall]

Please paint this weight plate after you done all the tabs, don't let it rust under the fuel cell forever! While you are at it prep and paint the parachute mount!

[@CainSample]

Your asking too much 😂

[@rgreerjr]

you actually expect these dudes to do anything the correct and responsible way? you must be on the wrong channel

[@martinwarner13]

This is not the boosted boiz way. Trust the rust!

[@itsZoyb]

weight reduction! oh wait...

[@athotboy5050]

Thinking the same thing, not to mention with where the ice box is, there is going to be all kinds of spilled ice, spilled water, condensation from the box, all trapped on top of the weight plate. I hope he protects it somewhat at least lol.

[@syclone73]

nutserts will not hold that weight for long or at all for a tie down point. the first time the car comes down hard the car will run over the plate and tanks. drill through holes in the frame with pipe welded in the frame so the bolts do not collapse the frame rail.

[@flyhacking5830]

BUMP

[@mjc8248]

For sure, I barely trust them to hold fuel line brackets and body panels. A flying weight plate could seriously mess up someone's day.

[@Sir.VicsMasher]

Also add tank straps as those tiny aluminum tabs are not designed to hold the weight of a full cell/ water tank.

[@derekbader130]

Well, they are on the inside and kinda wedged in there. The bolts would have to sheer off before the plate would completely drop out. Plus they're putting tabs off the front as well, And it holds Wyatt! Haha 😄

[@martinwarner13]

@@derekbader130 you make a great point Sir, it did hold whitt pretty well. That's a fair test in itself

[@deadpooh85]

Mr2 once finished needs a sick wrap to show off all your sponsors so when you break into 7 seconds they all get coverage

[@Fordman7575]

Awesome Fuel Tech set up. Now you just need to upgrade the roll cage!! You guys are sure putting a lot of faith in those nutserts. I think I would have drilled thru the entire frame rails and added some sleeves. Then it can bolt all the way thru the frame rails. No chance of a hard hit pulling nutserts out of the frame rails.

[@802Garage]

At $1599 with the dash integrated that Fuel Tech FT550 actually does seem like a solid deal compared to a lot of options. Let's go.

[@otm646]

If you are spending your own dollar Fuel Tech is the way to go. Holly stuff is good, I don't think you would find something like a dominator limiting but but there is a real reason the pros use fuel tech, it's not just sponsorship.

[@snailfedperformance7177]

You'll definitely love Fueltech. I've had the FT450 on my Evo 8 for over a year now and will be running a FT550 on my LS Swapped Foxbody I'm building now. Baddest Ecu on the planet hands down!

[@bigccordova9214]

I was looking at my 11yr son wearing the the mr2 moon tune shirt on and reminded to check for the new content. Boom! We watched together the new content and always appreciated! Keep on boosted boiz, wyatt, Emilios world, PFI, clettus McFarland, fasterproms, cooper!

[@devil2jz500]

Fuel Tech, Brazilian technology. I remember when they first started, I never thought they were gonna go so far.

[@RubbishFPS]

I can feel Brents excitement from here when he says "all the data"

[@dbucs88]

MR2 is chugging along can't wait to see it back together!

[@kurlyfry7916]

I just saw the post on Instagram! It’s great seeing so many cars making the switch to fuel tech

[@joeysgarage7963]

I am absolutely loving the mr2 content, it's so interesting watching you go over all of the details of the build

[@TylerWallen]

Wyatt coming in clutch with the ASMR bubble popping. 👍🏼

[@Hunt904]

Not sure if I would do nut surts. With all that weight, if you still wheelie I’d hate for it to fall off or pull them out. Would do through bolts with washers. Looking good tho Kyle 🤙🏼

[@claymillican25]

Can’t wait to to see this thing rippin!!!

[@themechanic7561]

Just my opinion lads but wouldn’t trust those nutserts especially as the fuel tank is sitting on the plate too. Maybe run a nut and bolt through the chassis each side to the brackets on the plate as a fail safe just in case.

[@dantreadwell]

Or weld the nut to the frame? I was thinking the same thing re nutserts. Guess time will tell.

[@att0987654321]

Yep on the same page!

[@Keule_from_Mars]

you need a bar / cage to protect the tanks anyway. just mount the bumper to that. and those bolts that hold the weight plate should go through the frame and get a counter nut or smth. so the vibrations wont rattle them lose. will be quiet the show if you'd run over your own weight plate and fuelcell.

[@otm646]

If they beef up the tabs what they have is fine. Running prevailing torque nuts and loctite those tanks are not coming loose.

[@Kp61dude_]

Give this dude Wyatt room to run around and spread his wings and I bet he’ll leave a bunch of us speechless! Keep it going boiz!

[@Dmanpeterson]

Just looked up FuelTech, probably one of the most affordable standalone ECUs out there and they seem to have AMAZING functionality.

[@Foshomoto]

"I'll keep them entertained"😆 😆 😆

[@AaronCoyRacing]

The fueltech wideband "nano" is excellent!! It runs on Can and very fast!

[@bengelman2600]

"So I called em, I was like, I got an MR2 I wanna go fast!" Funniest shit ever

[@anthonyestevez118]

You guys have come so far from even a couple years ago when I caught on to BOOSTED BOIZ! Love everything you guys do! Keep up the great work! Thanks for sharing!

[@Sausketo]

"I was gonna say hell, but we gotta keep it monetized" thatll fool em

[@GarethStirlingCruisers]

The record is in sight 👌 Let's smash this boyz 🤞🤞🔰🔰

[@gnarkiller]

7.70 or bust

[@Matty.Hill_87]

@@8SecSleeper why is it?

[@GarethStirlingCruisers]

@@8SecSleeper why is that? Get a life lol

[@MidTennPews]

@@8SecSleeper breaking records and winning events is the goal on racing of any kind. If you're not in racing to make an impact then you don't belong on the track. You sound jealous.

[@dustyc324]

@@8SecSleeper nah. money isn't the only thing that makes you fast. and racing is a competition isn't it?

[@jameslanglois2873]

You'll need something to protect the fuel cell from getting damaged in a front end collision. Most tracks won't let you race without some kind of cage around the cell because it's up front

[@corycruzan3686]

Love how focused y'all are it's incredible

[@XenophontisWarrior]

Nice to see you guys going all out with it, 100% 7 second potential here.

[@Fordman7575]

Except the cage!!!

[@brandonconway8302]

The Trac arm in the front is called a trailing arm.. love the new setup.. can't wait to see run down to he track..

[@traitorhatergetarope3163]

Going to be a beast.. add some bars to that cage please...

[@jayrodz3122]

Almost 1million subscribers holy smokes thanks Wyatt for helping Kyle out these uploads been awsome I just keep learning more much respect and love from Fresno California I'll shot gun some beers when u get to 1million stay up Boiz 👍

[@cagedcode]

Loving the mr2 updates!

[@IISTAGII]

Man, gone are the days when kyle used to use parts that Brent just had "lying around the shop." It's been awesome watching the channel grow, same goes with PFI too.

[@Mashidof]

lol the old days when he picked parts to the junkyard

[@rgreerjr]

You know what I miss? I miss when there would be footage of actual work being done, now all we get is quick little jump cut updates showing us the final product of the work they have done.

[@nosoupforyou2759]

It happens when you move up, no more junkyard parts or making things work with what you have only wake up slap something to put for content.

[@meatpopsicle5216]

@@nosoupforyou2759 Agreed, Also have to remember its still Kyle doing most if not all of the editing I believe. Hes gotten bigger and better, which also means less time for other stuff. He's on a mission to get the MR2 to the moon, just be happy were along for the ride! :D

[@mikea8060]

KYLE you should get some clear headlight wrap an cut some sheets out to size an put on you fuel tech screen I did with mine never has had a scratch on the screen an will stay looking brand new food for thought… you guys are killin it boiz!!!!

[@ryans87supra]

The wife is gonna be mad at me for watching this instead of my chores

[@DeejayPozE]

Same with me brotha hahaha so many times with KZbin

[@sarab2906]

Pretend you're taking a shit

[@jayrodz3122]

No real man let's a woman tell him what to do LMFAO 😂

[@Oyvind.]

@@idacrack1662 mad is ok, cracy is worse

[@ryans87supra]

I be get bitched at so much because of youtube. My wife is like go live with them and I'm like hmmm🤔🤔🤔haha

[@Matthew_Lang]

Every video you guys are getting closer and closer to getting this thing fired up again! I am ready for that day to happen, but I am enjoying the progress videos.

[@470whp-deathtrap]

and I'm over here getting excited about buying my first s300 V3 lmao

[@gnarkiller]

hondata is a great ecu for street strip cars

[@Ontheregz]

S300 is great! I’m on kpro v4 and have no complaints

[@micaharies]

s300 is great for beginners and street cars, but it has its limits for what these guys are doing

[@Ontheregz]

@@micaharies That’s why they went from hondata to aem and now fueltech, Kyle even explained that in the video lol.

[@petrolhead8851]

And I’m over here thinking my haltech elite 1500 with my haltech ic-7 dash display is the shit! Wtf man!

[@cyraxplex]

Unlimited power.. My young apprentice... God Bless. KNIGHTRIDER

[@deathh989]

Come on guys we need to get these to a mill🙏🏻💪🏻

[@jordanmccreight7027]

They are called radius rod arms. Love the Chanel can’t wait to see the mr2 back again.

[@alitttlebitofeverything]

Only 3k more subs for that big ol million!! Woohooooo

[@Danger-Dave]

Man the MR2 is gonna be sweet! that setup is going to be a game changer and we're rootin' for you guys and that MR2 record!! BTW fastest 4 banger is Carl Brunet and his Ecotec powered 2009 Pontiac GXP. 5.951 pass at 230.80 mph .926 60-foot time followed by a 3.861 1/8-mile e.t. at 188 mph.

[@gnarkiller]

Saw this coming as soon as you guys visited their warehouse

[@voiceofreason7530]

Fewer wasted passes. I love the content. Thanks for taking use along for the ride.

[@rmxrider20032000]

Cage update in the future, we can assume.

[@ryofrmohio2162]

Hell yeah you'll be at a million in no time once the MR2 gets up and running!! About to get it with the new setup can't wait!!

[@markyingling8341]

So excited for the mr2s return!

[@Canadiangangstar]

I am very impressed with the weight plate and all- very dope!!

[@thatsmypurseidontknowyou4797]

Is there a baffling or something inside that fuel tank? Just curious if he wheelies hard will the fuel flow have issues?

[@danielclark7397]

Bump

[@garyhowe88]

Sump of the tank is in the rear, even if the car was 90degree straight up the fuel would still be in the rear bottom corner.

[@p-rob6275]

Appreciate those little updates...love seeing the progress being made.

[@MOTOHEAD-ko3tq]

He'll yeah brother let's go been waiting on this upload.

[@HunterAtheist]

Coming in hot with a half hour of power as Brent would say!

[@MOTOHEAD-ko3tq]

@@HunterAtheist yes sir!!!

[@viciousvibes7829]

If you're doing fiber glass for the front hole. Just fiber glass angle iron on the top inside of the bumper to make it rigid.

[@perttukokkola]

Have you think about seam welding that mr2 body?

[@calebkinghorne9469]

So happy to see you growing the Channel and gaining more sponsors and friends that allow you to better yourself and build better cars. Keep up the great work!

[@Sammyadams432]

Let’s go!! Can’t wait to see this thing rip

[@damoncarlson8467]

As I was watching this I got this feeling that you’re gonna get the world record. Can’t wait to see it!!

[@loganb9265]

Have kevin from ksr help with sensors plus it would be a sick colab

[@mitto4504]

Build the best car you can. Then get it Tuned By KSR. Your car is now legit. KSR cars are tough to beat 👍

[@bryduhbikeguy]

I can see the need for a nut welded to the frame horns and the bolts ran through,after reading all the comments.I wondered how well the 'serts would hold in a minor collision,but the wheelie drop really got me.The nut-serts are brass and Will shear off.EEK.Heck guys,give a break.They're setting it up,and doing Awesome !

[@jaynikk758]

Hey does anyone remember a little deal Kyle made with us if he ever hit 1M subs? The super-OG's will know 😂

[@danielramsay2680]

Refresh my memory, I'm not og but have watched every video

[@omfgg3tlost]

I’m a super og but can’t remember what he said. Bad memory lol. What was it?

[@elliottvader2377]

I remember

[@toddlaplanteVT85]

Pepperidge farm remembers

[@05redser]

Is he finally going to openly admit he's gay?

[@rsharney1111]

Your getting all the details brother, good job. Might wanna consider an arduino IR sensor or gyrometer, for the wheelies. God Bless you and God Speed!

[@bighomieJ5X]

997k subs 😁😁 1mil LETS GOOOOO!

[@richardfarmer6570]

Looks like you are taking some intelligent steps to keep the wheels on the ground, can't wait to see you put it to work.

[@nothingimportantlol]

3000 more subscribers! MORE VIDEOS!

[@MissionRestomod]

I believe the word you are looking for on those bars is strut bar or radius rod (depending on the manufacturer). Classic Falcons and mustangs have them.

[@lucazevedo46]

🇧🇷🇧🇷🇧🇷

[@danielramsay2680]

Hope you take the time to do everything right. Love too see it smash some runs with no issues from half done things

[@timocallaghan4408]

You should slot the bolt holes on the mounting tabs for the weight plate so that if you do ever wheelie real hard and land on the plate, it can slide upward on it's mounting tabs instead of bending the frame

[@joshlink34]

Definitely will hit 1 million subs before end of month and you guys deserve it and much much more keep the videos coming. Can’t wait to meet you guys next year at Cleetus and cars

[@jamesglenn2006]

On your weight plate. I would run your mounting strap up and over the top of the frame horn instead of just the 2 bolts and your front gusset. This would rely on the strap for support instead of the bolt shear strength. My 2 cents. Get that record boys👍

[@Moisttt]

Crazy to think you're about to hit a million subs. Been here since 30k, killing it!

[@Scientwisted]

Seeing everything you do here is pretty much the only thing keeping my drive to jam my J32 into my CE6, time is scarce though. I hope I get to see all your awesome cars up close one day.

[@MrSUS14U]

Loving watching this build and getting explanation of all the parts. Keep it up!!

[@stephencarter1442]

Before Honda 4 cylinders i tried chevy 153 and 181 Pontiac tempest 189 pinto 2000. Its dam hard to keep up with v8s but we did. We used turbo and nitrous circa 1981.

[@tylerscott2420]

Loving the build video on this! Grinding every day.

[@jtyoung706]

Those bars in the front are called strut tension rods. They perform the exact same function as a traction bar on a Civic.

[@crxh22honda37]

There's bolt holes on either side of the hood latch. Make a A frame mount for the bumper. So its small, easy and leaves room on either side.

[@geak28]

Keep the videos coming. Love seeing the transformation of the mr2.

[@matthewmcclintock5806]

Hell yeah brother Fuel Tech ftw.. I can't wait to see the MR-2 back together you've gotten faster every pass and I can only imagine how fast it's gonna be when yall get it dailed in now with all the upgrades

[@grant2410]

Nut serts.. Cut the frame with a hole saw and weld in some small tube and use a through bolt for that weight plate, water tank and fuel tank.

[@johnb7430]

Kyle... "doing it right" jaw hits floor! You go guys! Git er dun. Let's see that 7.99

[@young11984]

Moving on pretty quick, may want to add 2 more tabs on the outside of the frame rails for 8 total since the rail metal is so thin or maybe weld a plate to the rail for the threadserts to have more substance to hold to. That plate weight multiplies when the nose slams down lol, cant wait to see the MR2 breaking that record💪🏻💪🏻

[@alexmurphy7472]

Fuel Tech has a crazy RvW car. Cool to see you working with them.

[@johnsimons6748]

Dude, this is not trying, this is grabbing a huge bat and swinging not for the fences, but sending out of the stadium. The MR2 is realy legit already, but this is skipping a level and going into the major leagues son! Realy loving this. You may well be hitting 4sec 1/8 mile times! That's Street Outlaw territory brother. Wyat must be thinking about some extra cagework doesn't he? Super cool that Fuel Tech hopped on board on this deal. Props to them for believing in you guys. We already believed, but now major companies are too. Great job guys👍 greetings from Holland

[@ulissesfraga2384]

Fueltech is perfect. I came through the fueltech channel. Good Job.

[@giovanicarneiro1818]

Hey I’m so happy for you finally got your fueltech I remember that day in Maryland was good I excited to go down to Florida and visit you

[@seanp777]

Nice to see the MR2 finally getting it right! Wonder if we’ll ever see a BoostedBoiz wrap on it! You guys are a great team!

[@turbomonte1]

You can plug the Fuel Tech into a laptop anytime, with or without the harness plugged in and it will power up and you can go through the functions, settings and load tunes right on it.

[@jameswitt8124]

Did you see Robs 3 rotor on fuel tech make over 1,000?? Seems like an awesome product. check out that electronic waste gate too, seems like it opens up a lot of extra perimeters.

[@garyhowe88]

Literally could of made that on almost any ecu. People rave about this ecu and that ecu most of the time the thing what matters is the person pressing the buttons.

[@BurntToastFTW]

Kyle living the dream... working on awesome builds and enjoying it, wish I could do the same lol

[@clydeyokoi9347]

Hey - you might want to add more bolts and bigger bolts on the weight plate. When she slams down from a wheelie, you can shear those small bolts. Remember this is a weight plate not a bracket!!

[@lucasdamask]

Fueltech's are the best, glad that Anderson decided to help you. great product!

[@mitchellmeyer4177]

It's a breather of fresh air to hear that after the mr2, your getting back to the silly/fun stuff. I want to see you grab the record it would be cool and would help add legitimacy to the channel so you can do even more stuff

[@Andyspeeder7]

Wyts the man..... no danger would this build be as quality as it is now without him...... kyle thats the smartest move you made yet kidnapping old Wyatt to Florida QUALITY

[@shanerathburn9734]

Make sure you guys put a tac weld on the nut serts that way they don't spin on you guys when you take the plate on and off.I believe those are tension struts your talking about on the front.