This is the most thorough and concise review I’ve maybe ever seen. Thank you - exactly what I was hoping to find.
@InFocusStudio3 жыл бұрын
After doing much research I ordered my Bosh CM10GD before finding your review. Yours is Hands down the best review I've seen so far. I learned things from your video I didn't know the saw did from other reviews. I'm now more confident in my purchase and looking forward to trying it out once it arrives.
@NaluRash7 жыл бұрын
I love Bosch products. They have never let me down. As far as Lasers go, Lasers are a joke. I'd much prefer the shadow line that are on some other miter saws like the DeWalt. As a sign fabricator, working in a shop environment for over 15 years, Lasers are the first thing to go. However, everyone works differently and mileage may vary of course.
@tripasing6 жыл бұрын
is daaamm goood
@jakechenier4142 жыл бұрын
Lasers will also move and need to be aligned over time
@Raul2815310 ай бұрын
you like the DC? I can't believe it. Mine covers the whole shop with sawdust. Three hinges. I can't stand the hold down it is clumsy and crude. I got the 12" and put a Ridge carbide mitre blade in it. It's a beast.
@thomasbacon5 жыл бұрын
Mount a nut onto the hold downs knob. Keep a battery drill with the right bit near the saw and use the drill to apply and release the hold down rapidly. I know it's not ideal but it is a work around.
@mojorizn725 жыл бұрын
Only laser I need is the one on my pistol. The zero clearance slide is a seller for me. Will allow me to save space in my garage shop. As for the hold down issue..... if your using it for woodworking in a shop, build your own table and fence. You’ll get more control that way.
@judithrob15914 жыл бұрын
Tips. Very important if you would like to saw with precision. (avoid torsion as much as possible)! Always choose a Miter saw with a handle positioned in a vertical line above the saw blade. Everything must be aligned, slide rails, handle, and saw blade,it is much better this way the blade will not tilt. Because there is some torsion in the aluminum housing . And choose an engine with softstart on it to prevent wear of the gear and worm shaft. It is very important that everything is aligned. Here are some examples to show how the handle must be positioned above the blade. Bosch gcm 800 sj / Bosch gcm 8 sjl / Evolution rage 3 / FESTOOL KS 60 / HITACHI C12RSH2 / FESTOOL KS 60 E KAPEX / Metabo KGSV 72 Xact (This also is the case with the Miter saw without the slide rails). If you want you can test it yourself at home if there is torsion in the aluminum housing. Step-1. First you make a saw cut from +-5 mm deep in to a flat piece of wood about +- 20 mm thick. To this with the normal handle positioned on the right side of the Miter saw. Step-2. Then repeat this by pushing the saw blade down with your hand (finger) on the aluminum protective cover were the saw blade is cased in. Just now only do this without the running engine. Step-3. Now you can see if the saw blade will be positioned in or next to the saw cut. If the saw blade is (+- 0,2 / 0,5 mm) next to the saw cut then there is torsion in the aluminum housing. Step-4. therefor it is much better to choose a Miter saw with the handle positioned vertical in line above the saw blade. Conclusion: how further away the handle is from the saw blade how more chance of torsion in the aluminum housing.(don't go for that). .
@wedonatetogether826 жыл бұрын
Thanks for the detailed analysis. I am in the market for a replacement for an outdated saw and this looks like the winner. Based on price I think I will buy the 12" unit.
@jewermank85365 жыл бұрын
So is it a fine woodworking saw or a construction saw? Or both? That was the thumbnail on your video, figured you'd give an answer near the end
@fluxcapacitor053 жыл бұрын
It's all in the effort to remain "impartial" so everyone can pretend they're in the group consensus. It's kind of like those Bigfoot shows on Discovery channel. The show never actually delivers, and you always know how the end
@Jeedehem4 ай бұрын
Finally the review I was searching for! I’m picking up mine tomorrow. As for the laser dilemma, I have decided that, over the Festool, aside from the the obvious financial gain, the Bosch is far superior than the prior for a goooood reason : the handle! On the KPX, you somehow have to contort your wrist like if you were pouring water on a plant on a high shelf, while pressing the safety with your thumb. It is plainly stupid. Also, the Bosch buttery glidness is superior, hands down.
@samsullivan39927 жыл бұрын
When the day comes I need to replace or upgrade my 12" ridgid slider I hope I can get one of these. I'm also suprised it doesn't have a laser, I don't pay attention to mine alot but with that said it is nice to draw a line on a board to an unknown angle and just align the laser to it.
@martypatrizi76262 жыл бұрын
I've been a contractor since 1988. Need a new power mitre-saw and I've seen used/them all. Been thinking of this saw for months. Glad I viewed your take on it and although it looks like a nice saw, the slow start Makita is prolly where I'll end up just for the weight factor. Thank you
@bumpymotors4 жыл бұрын
Andy, you hit every single positive and negative note I also have dead on the nose. I've never used a miter saw before but bought a brand new Bosch in Aug of 2020 and fell in love with it right away, with a couple small concerns. I don't like the amount of wrist-twisting I have to do on the hold-down clamp, but not much I can do there. Having to eyeball all my cuts seemed stupid especially since I could have bought another miter saw for half the price that included a floodlight and laser. I solved that problem by adding a small laser mounted to the little black bracket at the back of the blade which holds onto the shroud. It's wired up to a battery pack and trigger switch I mounted directly inside of the handle for easy access and a clean look.
@ZeroCoolOO77 жыл бұрын
I also have the Bosch laser washer and it works amazing. zero issues.
@joeblownogodontinvademypri26186 жыл бұрын
Construction or fine woodworking? You never answered the question posed on the opening frame. What's with that?
@pat.cheung5 жыл бұрын
Wish I read this comment before watching the whole vid. The title is the only reason I watched this.
@kcattteau3 жыл бұрын
Inference?
@brianwoodruff27363 жыл бұрын
Construction in my opinion. Too much play in the miter when it’s pulled out. Lifting that bevel handle is a real workout as well you have to have it mounted to a heavy bench or you’re prying open with both hands. I’m used to my 12” dewalt and this has been rough getting used to in the shop...
@jetjohnson11063 жыл бұрын
A miter saw isn’t really a fine woodworking tool in general.
@georgedesjardins60803 жыл бұрын
Own it, as with all, too much play for fine consistency. Better suited for general cutting, so use your table saw for fine.
@gt2scale7 жыл бұрын
I have the 12" model and that thing is a beast!
@gt2scale7 жыл бұрын
I have a Diablo blade installed (Diablo is Freud). I upgrade the blades on all new tools since included blades in my experience are always junk. I don't cut a lot of really thick stuff so I cannot speak to the issue you are referring to. I have had to flip some pieces to get total width, but it was still safer and more accurate then using the table saw in that case. .
@Josh-mh3kl6 жыл бұрын
Make a cut and line up the cut line...is it absolutely flawless? or are there kerfs in the cut line? I can't make a perfect cut no matter how hard i try. THere is ALWAYS a kerf in the cut when i line them up. 10" saw is junk. Haven't tried the 12"
@JcortesJ6 жыл бұрын
I want to buy the 12" but I'm concerned about the size. I wanna be able to transport it on the back of my silverado and be able to close the bed cover. Would you help me out and tell me if it would clear 20"? I don't think it does but if I put it on an angle sideways maybe? Hope you can help. Thanks!
@Josh-mh3kl6 жыл бұрын
JcortesJ they are exactly the same size and weight. 18-1/4 high
@JcortesJ6 жыл бұрын
Thanks! DungTrumpet ... I appreciate it.
@mmlips7 жыл бұрын
Totally agree. The hold down is cumbersome at best and I for one would love a laser. Other than that I love mine!
@dBassCline5 жыл бұрын
I don't use lasers. I don't find them to be precise enough.
@ouroborosrecords7 жыл бұрын
I have the 12" and it has a laser. Surprised on your comment regarding the dust extraction, every single review I've seen here, and prior to purchasing, the consensus was that the only issue is the dust extraction.
@ThekiBoran6 жыл бұрын
Ben Good Are you in Europe? My understanding is that the European model does have a laser, the US model doesn't.
@MrWizards19745 жыл бұрын
Review? I herd/seen nothing about accuracy. The single biggest selling point of any saw is accuracy. Does it produce repeatable accurate cuts?
@JS-rp7qb4 жыл бұрын
Said it was square out of the box and adjustable if it wasn’t....
@aaronalquiza96804 жыл бұрын
in terms of repeatable cuts, he said the hold-downs are not too reliable. but anyway, i can make custom stop blocks.
@onefifthtoofifthwedfifthbr53713 жыл бұрын
How should I know?
@Rauger-ye7uu4 жыл бұрын
I just purchased this saw and really like it, thought I agree a user guide would be nice.
@ArmyVet765 жыл бұрын
I recently purchased the 12” Bosch. They did a design change with the safety release switch on the underneath of the handle instead of sides which I am not a fan of. I have a short thumb due to loosing some of it in a non wood working way lol. The model on display was the one I was expecting. The other issue is not having the laser guide which definitely helps speed up location of cut. Other than that I love this Saw.
@RoundTwoPR6 жыл бұрын
Great review, I love my Bosch 10”, however id have to disagree on the dust collection. It’s my only real complaint with this saw
@codybaker11382 жыл бұрын
Great video! I just bought this saw, in part thanks to your awesome review. I just assembled it and found that the bevel lock lever at the front left is loose and rattles. Is that normal? Thanks for your help.
@bryancoombesart5 жыл бұрын
Just bought this saw. So far I like it. Mine was not accurate out of the box, it required some adjustment to the detent plate to get it 90deg. Hopefully it stays accurate, heard some rumblings about it coming out of 90 after some use. I can't see this being an issue for me since it's a dedicated shop saw, we shall see!
@rfo233 жыл бұрын
My Ridgid mitre saw has a laser, and honestly I don’t really use it. Measuring tape or ruler and pencil mark is best.
@90Davidea Жыл бұрын
Bought this for my friend for his birthday, and he loves it. Father-in-law was a little jealous, even. :) Built solid, but light enough to move around for projects. Easy to use kzbin.infoUgkxPeGkHOMe05FySypTOvYumxMn-xi39oRe and makes great precision cuts. Doesn't come with a laser mount, but the fence is straight as an arrow and if you measure carefully, it's not a problem. Can handle dimensional lumber with ease, but of course, there's a limit to how thick. Handled a 4x4" post without a problem, but 4x6" we had to flip and cut twice. Only thing we've noticed is make sure to tighten the nut that holds the saw blade when you take it out of the box and maybe check up on it occasionally. For some, this is probably a no-brainer, but we neglected to do this and a few months in, found the motor running but the blade spinning at about half speed or less. Tightened the nut, and problem was solved. Very happy with this purchase. Dewalt makes sturdy stuff.
@dr.timothyr.morris5389 Жыл бұрын
How would you compare this saw to the Rigid R4241 (Same as the Delta glider)? Does it have an LED light/blade-shadow? How much lateral deflection is there at full slide extension?
@Rickmakes7 жыл бұрын
For people who will use it for 90 degree cuts, a zero clearance insert will help line up cuts with more accuracy than a laser.
@graphguy6 жыл бұрын
and who does only 90 degree cuts with their miter saw?
@uglyashelful5 жыл бұрын
@@graphguy He is referring to the bevel being set, and left at 90 degrees. Most people do exactly that. He's right about that being the absolute best way to line up a cut.
@viniciogomez98636 ай бұрын
What is the difference with the GCM10 GDJ model? Power? Price? New model?
@travel-peter5 жыл бұрын
Adjustable laser?? In woodworking??? And 8/4 maple???
@victorprado13474 жыл бұрын
8/4 is 2 inches
@dcl977 жыл бұрын
I don't know of a single finish guy around me that uses a laser for precise work. I use the one on my kapex quite a bit for quick cuts though. They are still only reliably accurate to around a 16th. For more precision I'll use the laser to cut about an 8th forward of my mark and then work it in. I can reliably cut a line from a .5 mechanical pencil lead in half like that. With a laser, or even bringing the blade down on your mark that's near impossible to do consistently. I've found them much more helpful for making quick cuts when framing. Also the euro version of this saw has pretty much the same dual laser as the kapex if you're willing to go through the hassle of bringing one over.
@WorkshopAddict7 жыл бұрын
We use our lasers on our Kapex every day. Love them! We adjust them to our eye and they are perfect.
@danieldibiaso93423 жыл бұрын
Hey Andy love your videos. I’m thinking of buying this saw but after watching a few videos there seems to be some problems with accuracy espically on long cuts. The mechanism seems complicated with a lot of joints that may wear and get loose after a lot of use. Your thoughts.
@mmgodfrey7 жыл бұрын
If you have 5 dedicated routers, i figured you'd spend the extra $30 for the Bosch laser attachment.
@DillysADV7 жыл бұрын
this is defiantly one that I really want when the time comes that I have the funds to purchase. thanks for the details.
@jimbendtsen88416 жыл бұрын
definitely...
@ThekiBoran6 жыл бұрын
DillysADV I'd like to see a review of Makita's latest 12", the LS1219L. Makita makes great stuff but I have heard bad things about their miter saws. The LS1219L has been available since March 2018 yet there aren't any reviews of it anywhere, not KZbin or anywhere on the interwebs.
@juliocordero12204 жыл бұрын
A miter saw this good and this expensive should have the built in light casting a shadow on the blade for that perfect alignment like almost every other manufacturer has done. It’s so disappointing that Bosch didn’t think to add that. 🤦🏽♂️🤦🏽♂️🤦🏽♂️
@aguilayserpiente5 жыл бұрын
Do the articulating arms and blade wobble? If they do, this unit is a no no for fine wood working.
@robertmedina39822 жыл бұрын
Very strong informative video. Good job.
@jayrutan34954 жыл бұрын
Can a Festool hold down be used on this miter saw? They are the best hold downs I've ever used.
@jamesboel46824 жыл бұрын
Are the features of the 10" the same as the 12"? Of course the 12 can do deeper cuts.
@nathanburt60533 жыл бұрын
There is a gentleman on youtube who has a video of how he put on a 20$ Amazon led light in this saw. Casts a shadow like dewalt saw does.
@miguelsanz28353 жыл бұрын
Hi, can you share with me the video? I am interested in adding it to my saw.
The trenching adjustment I could not set it shallow enough. When doing a kneebrace I could not get a stop at 1 inch . The bolt needs to be longer. Or do you take it out and put it in from the bottom
@tomcieszenski72496 жыл бұрын
The trenching feature really caught my interest. I'm a finish carpenter and have to do that by hand a lot. The weight of this saw is troubling though. It's the only turn off for me. Lugging it to and from the truck every day would be taxing since it weighs about 40% more than my current slide saw.
@bentcountershaft7 жыл бұрын
My only experience with a laser on a miter saw is my 12 year old Craftsman. It wasn't accurate out of the box and I didn't spend much time trying to correct it so I never used it. Just a case of not missing something you never had kind of thing.
@jl93627 жыл бұрын
Workshopaddict Andy, I'm considering this saw in addition to the older Milwaukee 6955-20. if you have used the Milwaukee what do you think of the power and accuracy and would you use it for woodworming?
@WorkshopAddict7 жыл бұрын
John Lane I have used both and I would prefer the Bosch over the Milwaukee in a wood shop situation. If you are on the go more, then I would go with the cordless Milwaukee
@pctatc665 жыл бұрын
the EURO version of the saw does have a laser. I was tempted to order the parts from a Bosch Euro supplier and install on my USA version. But in the end, I really don't need it. I don't use this saw for precise crosscuts. That's what the table saw sled is for
@aguilayserpiente5 жыл бұрын
Indeed, the table saw is the queen of the wood shop. Help me to understand how the telescoping or articulating electric miter saw has an advantage over the electric radial arm saw and manual miter box. It seems all stationary saws fail when trying to cutting trapezoid boards for a sand blasting cabinet.
@avocadotoast94893 жыл бұрын
What is your position on 12" saws? I'm trying to understand the pros/cons with the DeWalt DWS779 on sale everywhere for $349, but it seems that when a 10" slides it becomes just as capable as a 12" with 10" precision. Thoughts?
@WorkshopAddict3 жыл бұрын
Normally 10 is more of a precision trim saw and 12 us more framing and decking. What do you need to cut? That Dewalt is a nice saw for the money!
@avocadotoast94893 жыл бұрын
@@WorkshopAddict I'm doing a little of everything. Flooring, 5-1/4" baseboards, window trim, and crown. Eventually I'll be moving onto the exterior where I'd like to build a deck, fence my backyard, and build my own shed. Lots of opinions out there claiming the 12" is not ideal for fine trim which has me leaning towards a 10" (even thought the DWS779 is a killer deal). That Bosch saw is mighty attractive too.. Thanks for replying!
@WorkshopAddict3 жыл бұрын
@@avocadotoast9489 Many fine trim guys use a 12" and they use a good blade and take the time to make it right.
@avocadotoast94893 жыл бұрын
@@WorkshopAddict thank you for replying.
@CPBuilds7 жыл бұрын
Like the saw....can't justify the price when my $300 DEWALT does everything I could possibly want. I 100% agree with you with the hold-down comment.
@fr8trainUS6 жыл бұрын
Chris Parker I hear you there, definitely some sticker shock! Although it does have the functionality of a radial arm saw, So if space is limited it may be justifiable.
@davidndahura74373 жыл бұрын
Good but looks to have more expenses than a slide compound mitre maintaining those glides seems a cost than a slide for accuracy they need to be serviced regularly.
@ronsmith79737 жыл бұрын
I've had one of these for a year now and love it. But the biggest problem is not having an alignment laser or light. If anyone knows of a good aftermarket laser or led light that would work, please comment... Otherwise, great review of this tool....
@WorkshopAddict7 жыл бұрын
Ron Smith You do not have to go aftermarket. Bosch makes washers that replace the standard ones on each side of the blade. When the arbor turns, they automatically turn on. The MSRP of them is $30 each.
@ronsmith79737 жыл бұрын
WorkshopAddict Great, I'll have to look for these on the web... Thx
@MapBot117 жыл бұрын
I have the washer and it's fantastic. www.amazon.com/Bosch-LS010-Miter-Laser-Washer/dp/B004GH6YYO/ref=sr_1_1?ie=UTF8&qid=1489092978&sr=8-1&keywords=bosch+laser+washer
@g.work.specials68596 жыл бұрын
i have the 12". it's the european version, mine has a dual laser(both sides of blade) and works pretty good. you just have to know where it cuts compared to the line.
@kimchee941126 жыл бұрын
Has anyone removed the rotating table base from the saw? Yeah it became harder to rotate. The center bolt no longer fit back in but seems to be close, don't want to force it. No rust or anything, wonder if heating the aluminum center hole is part of the reinstallation procedure?
@PromisesFromGodsWord7 жыл бұрын
I got the 12 inch and love it.
@tombutkovich49614 жыл бұрын
Just bought Bosch 10” Glide. Having one problem that maybe you can help with. When I make a glide cut, 5” or wider board, I’m left with what I will call a “tooth mark, or curved groove” at the point where the cut ends on my side of the blade. I’ve checked and adjusted for square and tried a different blade. Still a problem.. 90 degree and miter cuts. Any suggestions? I would appreciate. Tom
@rw75323 жыл бұрын
Just a shot in the dark here. Start the saw and let it get up to full speed. When you pull the saw back (saw is on) cut just an 1/8 of an inch deep scribe line in the wood. This may help set the blade in its vertical axis and not deflect when put into the wood. Don’t lift the blade out of the wood after you pull it back. Push the blade down and then push through your cut. What may be happening is 1) the blade is not up to full speed when it engages the wood and is deflecting in some weird way or 2) when the blade is engaging the full thickness of the wood a little too quickly and deflects once it passes deeper into the wood leaving the rest of the cut different that than the start of the cut. If you notice in the video, this guy is taking two to three passes to get completely through the wood which is his attempt to avoid any blade deflection.
@Andy1dude4 жыл бұрын
"So if you're someone who's left or right handed..." well shoot, that's me! How did he know??
@brkat024 жыл бұрын
Hey me too!
@MikeMPharmaCyclist3 жыл бұрын
His point was exactly that; it's good for left and right handers because the handle design is ambidextrous; not all saws are. This is a useful observation even if you don't understand it lol.
@GordonGEICO4 жыл бұрын
This or the Makita 10" sliding? My garage is small so I can't have a saw with rails that stick out two feet behind it.
@WorkshopAddict4 жыл бұрын
You have more options than just those two saws now. The Bosch 10" is just the 12" saw with a 10" blade and guard. So its larger than the 10" Makita. Does that help?
@GordonGEICO4 жыл бұрын
@@WorkshopAddict That does help. Can you let me know what other saws have fixed/forward rails (other than the Kapex)? I can barely turn around in my garage so the closer I can get something against the wall, the better.
@joshfoster77604 жыл бұрын
@@GordonGEICO check out the metabo hpt saw
@GordonGEICO4 жыл бұрын
@@joshfoster7760 Thanks for the tip! I wound up grabbing the 2nd gen 10" Delta Cruzer on sale. Super happy with it.
@sjguimaraes87584 жыл бұрын
GordonGEICO how do you like your delta? I am in between the Bosch and Delta
@jamescarter39157 жыл бұрын
I need the laser. every things else looks like a winner. what is price.
@rockyroad85614 жыл бұрын
399.00 at Home Depot! One thing I read was the accuracy was not so great!
@jason-hh6lu4 жыл бұрын
How good is the dust extraction on this saw? I’ve had a Bosch mitre saw for 15 years, still going as I’ve taken care of it but the dust extraction is non existent.
@WorkshopAddict4 жыл бұрын
This saw sucks also.
@TechSavvy.2 жыл бұрын
@@WorkshopAddict Didn't you say it had noteworthy dust collection......one of the top 3 you'd ever used??? Or did you mean sucks in a good way?
@mikelawrence83082 жыл бұрын
Does anyone know what the distance from the fence face to the back of the axial glide mechanism?
@stormbytes6 жыл бұрын
Outstanding review. Wish you'd also review the 12"
@WorkshopAddict6 жыл бұрын
Daniel Balfour The 12" is the exact same saw, the only changes is the larger blade guard around the blade and the blade itself. The 10" is a very heavy saw for it's size and the is because they just made it fit a 10" blade.
@donask4102 Жыл бұрын
I WISH SOMEONE WOULD GIVE THEM ALL DROP TESTS
@daboo1235 жыл бұрын
It's not an "anti-gravity" stand. It's a gravity assisted stand. Meaning that the way it's designed it uses gravity to actually stand it up into a working position so you don't have to lift it up.
@daviddavis56896 жыл бұрын
I think it depends on what you call fine woodworking with any miter saw; really.
@alanr7453 жыл бұрын
Well said. Blade quality is key to cut quality. Calibration for everything else.
@russwebster33027 жыл бұрын
Nice video Andy. I have the 12 inch version of this saw and love it. I put a 80 tooth Diablo on it and it cuts smooth. I do wish it had a laser or really the XPS lighting system. And I agree the Bosch Gravity Rise stand is awesome. #WORKSHOPADDICT
@joshmcdevitt1372 жыл бұрын
Buy an industrial blade. It'll blow your mind
@Miiike6047 жыл бұрын
Great review. Brilliant saw. I do still prefer the xps lighting system of the desalt dws780 over the standard laser.
@DennisMathias3 жыл бұрын
Does this saw allow setting depth of cut? Like for rabbets & dados?
@paulwhealy5243 Жыл бұрын
Watch the video. Dado stop setting.
@larryeuteneier58775 жыл бұрын
Does the saw have a laser light for cutting
@WorkshopAddict5 жыл бұрын
No, but for $20 bucks you can add Bosch laser washers.
@zaneh62245 жыл бұрын
On a saw of this price omitting a laser or shadow line is a big no no, I have the 12" version of this and the dust collection even with vac attached is terrible, I hope this one is better but from the various videos I see it still spits a lot of dust out even with vac attached.
@WorkshopAddict5 жыл бұрын
I agree it should have a shadow line.
@corvuse.28735 жыл бұрын
There is YT video that shows how a dust port adapter was fabricated that does an almost Kapex level of dust collection.
@wildbill69765 жыл бұрын
There's no such thing as a miter saw with a "good" dust collection system...
@ianrose28237 жыл бұрын
I'm a furniture builder and I love the laser on my Kapex!!
@ThekiBoran6 жыл бұрын
Ian Rose I hate the uneven tables on my Kapex. Festool has skull f-ed me on this, they won't fix or repair it. I'm going to post a scathing video review of the Kapex as soon as I get it back. Festool can F themselves.
@chrisflux576 жыл бұрын
I want to see the 10 inch in the UK!!!! Why only the 12 why 😫😫😫😫😫
@DennisMathias4 жыл бұрын
I don't know about a laser but some sort of optical cut alignment is de rigueur.
@dinnerwithfranklin24514 жыл бұрын
Excellent
@MrEltiburone3 жыл бұрын
no holes for crown stops???
@garyhinchey5954 жыл бұрын
Yeah I wish it had a laser also very handy to have
@BiggMo4 жыл бұрын
Not a fan of lasers for fine woodworking. Lasers have there place for production - regardless of brand, most of my fine woodworking buddies install a zero clearance blade insert which provides blade reference on the front edge.
@kookiemoose7 жыл бұрын
The saw not having a laser or shadow line was unfortunately the deal breaker for me. Really liked all the features. It's a very nice saw
@DaCake25 жыл бұрын
Im shocked that this saw is as much as the dewalt. You really pay for that swivel arm huh? Better start saving though, cause I love it and need it to save space. Thanks for the vid.
@siriosstar47895 жыл бұрын
Linop. Not sure why you are shocked that the bosch is as expensive as the Dewalt ?
@brianwoodruff27363 жыл бұрын
The dewalt is better for finer wood working. The Bosch is better for framing in my opinion. The whole axial glide system has too much play. I’ve got 10 years on the dewalt and 3 years on the Bosch. I’m not surprised by the price, but I wish more “reviewers” would comment on this directly. There’s always a ton of comments on its poor accuracy but nobody who gets a lot of views can ever confirm the issue...
@missmymountain6 жыл бұрын
Their older style hold down is a much better, faster acting, design. It is still available for about $20 and fits this saw.
@nobodysdisciple22746 жыл бұрын
missmymountain i
@antonyjally3585 жыл бұрын
can it cut metal iron steel
@zachrawlings65232 жыл бұрын
Shadow line bro!
@SwapnilBhartiya3 жыл бұрын
What's the total lenth from front to back?
@RayStarbirdHome3 жыл бұрын
Another reviewer stated it's about 33 inches from front to back, which is ~10 inches shorter than many sliding miter saws. A nice benefit for smaller shops.
@SwapnilBhartiya3 жыл бұрын
@@RayStarbirdHome Thanks. Given limited space in my studio. I went with Dewalt713. Thanks for the review.
@zachorstman26627 жыл бұрын
I've got this with a laser, works a treat
@ThekiBoran6 жыл бұрын
Zac Horstman Are you in Europe?
@thegoodfight3652 жыл бұрын
There not being a led or laser is a deal-breaker for me now. Especially for a saw of this caliber. There's just far too many better options in my humble opinion. I know this is a new thing but I also wouldn't by certain tools now if they're not brushless and cordless where performance isn't sacrificed.
@AvocaSingleTrack6 жыл бұрын
The hold down clamp is an insult for an expensive miter saw like this. My 15yr old makita LS1013 has a much more useful clamp... i'm looking at new saws and that hold down is a problem...I dont see anyone selling better ones aftermarket. I wouldn't worry about lasers. You register the side of a tooth on your pencil mark and you can do thousandths by eye..even with my 50yr old eyes. Laser is kind of a new fangled gimmick. Lining up off the side of a tooth, you could split your pencil mark in half...so no need for laser. Good video, and thanks for posting it !
@g.work.specials68596 жыл бұрын
your opinion, laser is very handy when you don't have multiple feet of support with a long board.
@rolandogarcia50675 жыл бұрын
Nice tool man. Do you Smart
@UberKrispy3 жыл бұрын
This is the Mercedes Benz of miter saws
@JaySybrandy6 жыл бұрын
What's 31.6 degrees for?
@WorkshopAddict6 жыл бұрын
Jay Sybrandy Crown molding.
@JaySybrandy6 жыл бұрын
WorkshopAddict what for?
@WorkshopAddict6 жыл бұрын
Jay Sybrandy when you have a 90 degrees wall intersection, your miter angle would be 31.6 and bevel would be 33.9
@tomtimmons45897 жыл бұрын
Pretty nice. TY.
@garybarchas49845 жыл бұрын
No laser,no purchase!
@nathangrassl14096 жыл бұрын
Did anyone who has this saw have trouble adjusting the 45 degree left and right bevel? That's the one drawback I had. Poor engineering with that in my opinion.
@TheRangeControl7 жыл бұрын
No laser?! That blows chunks!
@sandervandijk23736 жыл бұрын
Look at your video, how you use the saw! I saw my stock in one cut. And it is not a well build saw, look at te ballpoint spring at the depthstop. And the bladeguard sticks to the edge of the stock while making bevelcuts. It’s a bad saw. If you want a good mitresaw, just buy a DeWalt, and if you want a small footprint buy a Kapex.
@shanebrown29634 жыл бұрын
Lasers are useless in my opinion for fine accurate cuts.
@tripasing6 жыл бұрын
is daaammm. goooodddd
@charleshetrick31526 жыл бұрын
Forget the laser and add “zero clearance” material to the base and back stop.
@kendogthunder4 жыл бұрын
I'm with you on that
@donask4102 Жыл бұрын
FUCK BOSCH!!! Mine broke in half!! No shit! It tipped over while on its stand (bosch stand) it hit the DIRT gracefully under only the force of gravity. It broke just above one of the arms hinges. The only thing that kept it together was the power cord
@Moore7946137 жыл бұрын
Nice review. I need a new saw ... mine sucks #WorkshopAddict
@aleksamaker81187 жыл бұрын
Wallace Moore your saw then must have a good dust collection
@JustAnotherDayToday4 жыл бұрын
What’s with all the fancy cutting style-just cut through the damn board.
@ryannance31973 жыл бұрын
I dont get it. You are a wood worker and want a laser?? Who uses that besides a residential homeowner which I would never trust. Also, hold downs. You have a stand why do you need hold downs. I have never in 20 years used a hold down and never had an issue. If I need a cut that precise I am probably moving over to a table saw. That saw is the Lamborgini of all miter saws, and you made it seem like it was a Ryobi.