Unboxing New Race Inspired LRP ZR.32 X Series Spec 4 NITRO Engine (Stock Not Modified Yet!!!)

[@5thScale]

I haven't had a nitro in years, but it damn sure won't be long, and that engine is calling my name, I'm not bullshitting!

[@BOTAJELL]

Elite Rc Zeeeeeaah!!!!!!

[@keithbates8482]

@@BOTAJELL So do you recommend 3 and 1motor oil in our nitro engines bro?

[@BOTAJELL]

@@keithbates8482 yes definitely you can use 3 in 1 works great and better then WD 40 . Last longer also keeps engines rust free and clean good for everything crank , bearings, sleeve and seals

[@keithbates8482]

@@BOTAJELL Thanks brother and Happy New Years to you and your family and may God bless you and the family 💯💯💯

[@miwa140]

Today I get my Lrp zr.32 Spec 4. I buy it for 175 Euro there is only 1 left in German now. You Start my Hobby back 10 Years I did not drive Nitro. Now it's time too Rock again ✌️🤙🤝. I hope I make all right with breaking in the Lrp zr32 Competition Nitro Engine 😁

[@BOTAJELL]

💥🤝💥👍💥👊💥🍻

[@MaddogMadigan]

Now I know you have nitros on hand. Great update

[@highdesertaggrorc7801]

Hello John, I think I've seen it in prior videos but are you using the Hudy break in bench for your .32 motors? I'm having a hard time getting some break in action happening with the motor in the car. Thank you!

[@BOTAJELL]

Yes I am but you will have to use different engine mounts or just add some washers to shim the engine up higher that’s all . 🤝💥🍻

[@walker1474]

Yeah I have a couple RB motors and they r so sweet,A lot of people don’t use RB motors where I live but man I’ve had nothing but great results from them especially when their modded,I’m just now getting into 1/5 scales and I don’t think I will ever go back to my smaller cars......It’s like an addiction once u step up to the big boys lol,and by the way your Losi MTXL is the shit!!!! What did u put that big RCMax 61 motor on if u don’t mind me asking?

[@tippy302]

Catching up on your vids over the holiday break. Nice job. I just placed an order with Amain for one of these. Any particular header and pipe you would recommend running with this engine? Appreciate the help and Happy Thanksgiving.

[@BOTAJELL]

tippy302 yes the Novarossi 41032 header and 51021/9886 pipe!! Rick from RB Mods got the pipes in stock now www.rbmods.net/

[@cjfisher1975]

BOTAJELL, I’m looking for new engine for Losi 8ight Truggy rtr, but I need help deciding which engine would be best for me. I’m looking at either an LRP .32 Spec 4 or a Nova .28-7 or 28-8 all would be a stock motor. What would be your recommendation?

[@BOTAJELL]

Give Rick a call www.rbmods.net/

[@DPINPIN718]

Your the man! Just got my nova 28-7t Roma.25 and s21 p5xlt hope Novarossi sends you a thank you letter !

[@DPINPIN718]

You know anybody running the s21 p5xlt?

[@GraySkull24]

Hey botajell. I noticed when i was Changing the rear diff fluid on the Losi 8ight buggy rtr. It only had 4 gears in it. It didn’t have another set of the smaller ones in the middle that over lap them selves with the little bar that goes across. If that makes sense. Was just wondering if I can buy the 4.0 diffs to put in it all the way around.

[@BOTAJELL]

bassHopper yes you can and I will eventually do that to my Daughters RTR TRUGGY as well ! If you do 50 K diff oil on the front and rear diffs and 100 K on the center diff on the RTR it will feel like nothing still because of that but if you do it to the Race 4.0 Diffs that’s from TLR Team Losi Racing it will feel great!! Big difference between the two . You will be able to put more power to the ground with the 4.0 Diffs !

[@jeffklimek3388]

Thanks for showing Oreo. I was playing this on the tv and my dogs were excited to see Oreo.

[@BOTAJELL]

😂💥🤝💥👊💥👍

[@lewisoliver5212]

I know Im randomly asking but does someone know of a tool to get back into an instagram account..? I stupidly lost the account password. I would appreciate any help you can offer me.

[@jamarimaverick85]

@Lewis Oliver instablaster ;)

[@lewisoliver5212]

@Jamari Maverick i really appreciate your reply. I found the site thru google and im in the hacking process now. I see it takes a while so I will reply here later with my results.

[@lewisoliver5212]

@Jamari Maverick It worked and I actually got access to my account again. Im so happy:D Thanks so much you saved my ass!

[@New2Kendo]

Nice, they are including Venturries now. Bro I have 3 I haven't run, the Mito 7 ceramic, the OS XZ-B Spec III and a LRP .32 with backplate not the X I installed it, but I wonder if the X just comes with a backplate? My LRP .32 was stuck with the piston up when I got it, I had to heat it and I used and Allen head to gently turn the shaft to get is BDC

[@henrylee5091]

LRP is back, and going to get one .32 spec 4 for my 8T-T!

[@garypaiva6714]

A bro I gotta question for you. Love your vids by the way! Have a LRP Z.28 E SPEC. Man I keep shredding brakes on this damn thing! Replaced them same thing. Turned down the brakes on my spektrum controller. Still shred! Pissing me off. What should i do?

[@BOTAJELL]

Gary Paiva replace the center diff bearings then go from there if you need to.

[@garypaiva6714]

BOTAJELL Thanks for the info. Just curious of why that would or could be the problem? I have takin it to local hobby store and they didn't even think of that.

[@NickCohoon]

I absolutely agree with you about garbage rtr nitros ruining nitro for people. My race fx royal and os engines i race with run forever and put down incredible power. The only time they ever flame out is if I have a hit on on my flywheel or if I have a clutch issue.

[@alfiebailey6165]

Hey botajell can you recommend me a header and pipe for the lrp.30 spec 4 that I told you about that I'm putting in my savage cuz the hpi exhaust I have is connected to the header with the rubber tube instead of a gasket and spring .... in having trouble finding one that will fit the savage that isn't ridiculously priced like the ercm end bleed pipe Can't wait to see your motor screaming after you put the full tune on it. And do you seal your engines up when you get them ? Great video as always Botajell can't wait for the next one 🤙

[@ddrc6437]

👍👍👍 for e word oreo lol....looking foward to seeing ur mtxl when its done.

[@love_4_rc180]

Damm.. imma get Me One OfThose. Thanks For showing us that New Exclusive LRP X Motor.

[@2hardtymes]

I need some advice ive been watching all ur videos you are a straight up guy i just bought the lrp 32 I want to put in my hyper 7 im racing it i bought a nova mephisto and I got a old school kyosho gt and im racing that too both going down the drag strip can give me some advice on where to put what and what I need to get to whoop on these guys

[@nasimwehbe8410]

When i was into nitro all my 10 scale stuff had OS Max. Never had an issue with them and they lasted me years. My 8 scale stuff was all LRP. Another great, reliable engine. Both my HPI Savages and even my T Maxx was running LRP. Wow it's been 4 yrs since i got rid of all my nitros. Still having too much fun with the 5th scale that i just don't miss it yet. 5T is next on my list.. Oh yeah. Good stuff as always!!

[@BOTAJELL]

Nasim Wehbe one day if you decide to do nitro ? Please go with a Truggy so you can run Nitros with back plates that will help you do amazing things that no Nitro MT can do trust me . They run the best and most reliable best idle best running and most rpm . Losi 5T is great bro and a must in your collection! You will love definitely love it. Probably best platform out there of 5 th scales just like the TLR 4.0 8T might be the best or definitely one of the best 8th scales. Braaaaap Braaaaap!!

[@MrDevilr66]

What glow plug do u use for the lrp 32x Iam using in my engine lrp R5 glow plug

[@fpvandgasrc4321]

Hey man great engine I just picked one up today think I might have it modified from RB MODS or TNS. But I'm hearing that these xtech carburetors are junk. I know Novarossi is out of business but is it still possible to get that carburetor for this engine.? Also I cannot find the 9886 pipe or the 41001, 41031, or 41032 headers for these... what is the next best header and pipe combo for this engine? thanks

[@benjaminsargent6718]

Just picked one up, gonna throw it in the TLR 4.0T. Any reco's on clutch+bell with this engine in the 4.0? Prob gonna run the stock carb for starter and switch to the nova if I have issues.

[@BOTAJELL]

Benjamin Sargent my Modified runs different then the stock one so maybe you will have to go 14 tooth instead of 15 tooth bell like me ? On modified 32 you Must Only use all 4 green clutch Springs from TLR and all 4 Max Life shoes but on stock 32 you can do 2 green springs and 2 gold if you want? And all 4 max Life or long wear shoes. I run 15 tooth bell always maybe you will be fine with that in stock ? But if you want quicker reaction you may need 14? Try both out and see what you like for the way you run! Again Stock 32 is different then Modified.32 ! Definitely Nova 41032 header for both stock and modded but 9886 pipe is a must for Modified 32 but stock you may want the 9853 pipe. Both are good . Definitely definitely definitely do 100,000 diff oil on the center diff and 50,000 diff oils for front and rear diffs !!!! Let me know what else you want to know?

[@godsun358]

I brought one because of this vid and this thing is CRAZY on the bench just too much POWER.

[@blaqkyellow]

Have a 30ZR Lrp just started looking videos about this new engine have no experience on. Do all engines come with carb insert/reducer? Mines didn’t

[@BOTAJELL]

Benny Lara no you want the X series engine!!! That’s the only one that’s race inspired true BIG BLOCK . It even comes with back plate ! I so recommend the new .32 X engine. LRP will be coming out again soon so hang in there . They told me this from Germany in a email!

[@BOTAJELL]

Benny Lara i would send that .30 ZR to get Modified from RB Mods or TNS and then Modify and install a Novarossi 2 needle carburetor on it and find a back plate for it and your.30 will be a bad bitch like next level Zeeeeeaah

[@BOTAJELL]

Benny Lara this video will show you part numbers and show you how to use Novarossi carburetor on the LRP engine kzbin.info/www/bejne/hoDGXmVvhq5nbdE

[@jamielukas100]

These are on eBay right now with the back plates on them. On sale for $179 if anybody is looking. I just picked one up for that price but they are almost sold out. Just search lrp .32

[@BOTAJELL]

jamielukas100 that’s unbelievable bro thanks for the heads up!! I got mine for $240 . There’s rumors of them going up to $400 bucks once there discontinued so I have to jump on that! Thanks again

[@jamielukas100]

BOTAJELL thats what im saying! 👍

[@TheBurky22]

What will be a good 1/8 Truggy bashing engine now that you can’t purchase Nova 28-8 or .32. I just built the Truggy 8eight and need a engine

[@BOTAJELL]

TheBurky22 I would get a Modified Novarossi 28-8 from RB Mods or TNS today like ASAP! Also you can get a LRP X series .32 from A-Main and I also like the Picco Boost .28 but there finicky to tune for a newbie but if your not a newbie your good!

[@BOTAJELL]

Even a Modified .21 Bonito would be bad ass on a Truggy and even a Modified.25 ROMA

[@nc2827]

If you put one of these in a Savage how would you start it? Without the rotostart plate or pull start wouldnt it be impossible? I am seriously considering this motor/Novarossi 28/8 (and I know how much you love the sealed motors lol) but how the hell would you start this in that chassis? Awesome content and thanks for the help!

[@BOTAJELL]

Nick C please don’t use this engine in a savage especially if it’s Modified!! Slap it in a TRUGGY!! Way better handling in the air and on the ground and way more durable. Stay away from slipper clutch stuff and go with the 3 diff set ups ! You can use MT wheels on a truggy if you would like but the best is the DE racing light weight wheels with the Badlands 1178 part number! With a savage I would use the HPI 4.6 engine all day or a LRP 28 with a shit pull start or roto unfortunately!! MTs are fun sometimes and that’s why I still have a few left but Truggy is the best way to go especially for us NITRO heads that want to take things to the next level and show off to those brushless boring no soul no flavor gay ass E-words !!!

[@BOTAJELL]

I would also use a Bone Stock Novarossi 28-8 with roto on a savage but a 28-8 with back plate for truggy that uses bump box will rev more and spank that ass of a savage in the air or the ground!

[@nc2827]

Thanks for the response! I hear you with the truggys but not really trying to compete with them, just want to build my ultimate savage. I like the Nova idea a lot. Keep up the great videos!

[@BOTAJELL]

Nick C have fun with your Savage build 👍💥🤝💥👊💥 Someday get to work on your truggy and drop a Modified nitro in there kzbin.info/www/bejne/mIeuqI1vf6t-gdE

[@DonaldByrd1970]

i forgot to mention, if you don't want that SCZ Reed valve LET ME KNOW.

[@BOTAJELL]

Donald Byrd sure but I usually keep all my engines! I love Engines more then I do the RC itself! I rather have more engines then RCs in my collection in this hobby. You will never see me with any E words again like I used to have that’s for sure lol I’m sure you already know that. Maybe a Rock Climber ?

[@jeremyhelminiak5178]

What’s the best starting option for this motor and fly wheel and bell combo, I just got one of these engines new in the box with a truggy I got and can’t seem to get much info on it.

[@austinwright6205]

hey botajell I need some help deciding between a losi 5ive-t or a hpi baja.I would be running it in sand and alot of dirt trackes.Any info will help?thanks

[@BOTAJELL]

AUSTINKILLS654 LOSI 5T will do both and more and it will handle the best in Dirt tracks But the Baja is fun as hell in the sand with sand paddles and can be fast as hell with some Street tires and driving it on the street !! I say get both but if you can only get one right now ? Go with the LOSI 5T and it’s so easy to work on as well! Both are great in there own ways I learned to love the BAJA nowadays I used to hate it when it first came out and today I wish I still had them. Nowadays I have 3 types of BAJAs but I used to have the first originals . Always kept my first 5T because it was great from day one 7 years ago and still today . Good luck!

[@austinwright6205]

Thanks

[@austinwright6205]

Hey botajell one more quick question do happens to have a parts list of the chrome/silver,parts on your chrome losi.Because if you do I want to,buy the parts.

[@nitrohead70Mats]

Hi John long time bro Getting my lrp zr32x spec4 next week. Wonder thats the best picco exhaust to run the lrp the efra 2133 or the efra2099 ?

[@BOTAJELL]

Sup My NITRO BROTHER 🤝💥🤝💥🤜🤛💥👊💥The Best Pipe for you to use for Bashing NOT Racing will be the ERCM EndBleed Big Block Pipe if you have one . If you don’t have one ? Use the Novarossi 51021/9886 pipe with the 41032 header also from Novarossi. There is another pipe that is also great also from Novarossi but I do not have it memorized but I can check for you once I get home and it really works well with the RB Mods modified 32! I was going to show it off in the future once I break my new RB mods 32 but I haven’t yet because horizon hobbies is messing things up with TLR and LOSI . I’m still waiting for the new TLR X TRUGGY to come out !

[@nitrohead70Mats]

@@BOTAJELL cool bro yeah i only have picco exhaust and reds exhaust. Here in sweden hard to get good novarossi exhaust and manifold for them. It sucks. Thx for your help keep checking for novarossi exhaust and manifold. Think i need order from italy then. Try out the picco exhaust to i get the novarossi exhaust. Hope all good with u and fam. All good over here still. This corona shit suck but we dont have so much down here were i live. More in stockholm and higher up im country. Stay safe bro. Iove your drag racing keep up the great work✌👍

[@BOTAJELL]

Nitrohead70 Mats 🤝💥👊💥🤜🤛

[@jonathanbatchler5952]

Question I just bought a Novarossi 28-8 brand new. Is it possible to still get them modded? And how much to mod?

[@BOTAJELL]

You can save $50 bucks if you tell Rick BOTAJELL www.rbmods.net/

[@gearheadaddict7183]

“Eword Oreo” lmfao

[@jasonauteri2129]

Hey John, is this a good stock motor for a newb to nitro? I'm building my first nitro truggy, 8T 4.0. And what manifold and pipe do you think would work well with this motor?

[@BOTAJELL]

Jason Auteri hell yes this would be a decent and fun engine to use on your TLR 4.0 Truggy!! This engine right here if you get it Modified by Neal from TNS or Rick from RB Mods ? It will be even better trust me that would be next level NITRO but even in stock form it will fun . Pipe combo to use for best potential is Novarossi 41032 header and Novarossi 9886 pipe and you can run a 15 tooth clutch bell . Another great engine to use that’s better quality is the Novarossi 28-8 Engine and you want Novarossi 41032 header and 9853 pipe for stock engine and 14 tooth clutch bell! And if it’s a Modified 28-8 Engine you want 41032/ 9886 pipe and 15 tooth bell!! Let me know what you get because you will need to use different clutch springs . And you must use 4 Max-LiFe clutch shoes on both these engines stock or modified!!!!

[@jasonauteri2129]

BOTAJELL thanks bro! I want a modded 28-8, but is it worth getting something that expensive if I've never used one before? Going to be bashing for sure. I already bought the badlands and I don't even have the truggy yet! 😂 And I don't want to be a pain in the ass with all the questions but nitros look to be a little more complicated than 2 strokes.

[@BOTAJELL]

Jason Auteri not at all bro ! If you like crazy 😜 RPMs ? Your going to love NOTROs!! Call Rick from RB Mods and see if he has a Novarossi 28-8 already Modified and see how much it is or get a stock one from Novarossidirect.com and send it to him or Neal from TNS and have them modify it for you . That would be the best way and best price for what you get at the end of the day. You can even try to find an LRP X series like this and ask one of those 2 guys to Modify it for you or just stay . Another great engine is the Picco Boost .28 but there more finicky not as easy for newbies to tune.

[@BOTAJELL]

www.novarossidirect.com/LEGEND28-8_p_3226.html this is a stock engine not modified.

[@BOTAJELL]

Here’s the other I would do www.amainhobbies.com/lrp-zr.32x-.32-spec-4-monster-truck-nitro-engine-lrp32825/p673347

[@jdhanoa26]

Hey man! I was wanting to put a Losi 8ight t 4.0 chassis on my RTR and was wanting to know if it is a direct fit or do I need to buy other parts too? From my understanding the 4.0’s front drive shaft is at a different angle and the 4.0 has a different radio/servo tray. Thank you and I hope to hear back from you man!

[@BOTAJELL]

Jaspal Dhanoa also the rear chassis brace is different and the 4.0 comes with lots of other goodies like sealed and greased CVDs and all 3 Diffs On the TLR 4.0 are different and better as well. It uses 4 spider gears instead of 2 like the Losi 8ight RTR and it also uses lightened outdrive cups and it comes with lightened spur gear. Plus better shock towers and shocks and all the TLR stuff uses better bearings as well. There’s a good few things that are different

[@jdhanoa26]

Oh I see. But should the chassis still work? My chassis is scratched a lot and I can’t seem to find the RTR chassis for sale.

[@BOTAJELL]

Jaspal Dhanoa you should use the TLR 3.0 chassis for a Direct fit !!! If you use 4.0 you will have to buy a few things to make it work but it will work

[@jdhanoa26]

BOTAJELL oh I see! Will do man! Thanks for the help brother!

[@mc83ssls1]

Yessss!!! Got my LRP zr32x back from TNS BRO!!!!

[@Cardiakk]

Floyd Brewer when did you order yours?

[@mc83ssls1]

Cardiak I ordered in November got it back beginning January

[@Cardiakk]

Floyd Brewer oh ok. Did you order through the site or did you talk to Neal directly? I was going to order one in November but chose not to because I heard that he was rejecting orders. I wish I would have just gone ahead and placed it.

[@BOTAJELL]

Floyd Brewer good shit bro!! I had to bust push him a bit so he could do yours lol!! Take your time with break in. She may have more compression then others so try not to look for that low idle after your break in procedure when your up to a base tune. Remember they like to run on the fat side. It took me over a gallon to get my motor to behave. Call me if you have any questions?

[@BOTAJELL]

Cardiak bro he told me that he has bin sending peoples money back and that we are all 2 years 2 late! He told me that it’s to much for him now since he has a full time job elsewhere. Neal used to mod engines and run a RC race track full time for years but the liberals have made it to hard for him to stay in business because of so many rules and extra taxes and fees and BS hazard material costs that are involved nowadays from the USA 🇺🇸 to Canada 🇨🇦 and from Canada 🇨🇦 to the USA 🇺🇸. He told me that everyone was affected even the manufactures. All these things have made it not worth going threw the headaches and doing this for a living anymore. He used to burn 15 gallons of Nitro a year and past 2 years he has burnt 1 gallon a year not including the breaking in engines. He said it’s very sad 😢 to see this happening. So if you mix all this with new generation ways and all the E word companies trying kill us motor heads off, it’s a recipe for disaster and failure but Not In My Book!!! I will only do this and if Nitro and Gas ⛽️ RCs die off ? You will never see me in this shit because I will never do a fake ass boring nothing to it No challenge E-word again !!!!

[@kizzelgarrett8251]

😎 video RC brother good information 💪

[@mikeyg4374]

botajell I love your videos, good to see guys that are still into motors !! I have an lrp.32 spec 4.. I can not find a backplate for it any suggestions... did lrp go out of business or they low on stock??

[@BOTAJELL]

Mikey G soon they will be going out of business so stock up on Engines now!!!!! Bro all those LRP back plates are sold out because everyone and there mother want them now !! but you can also use the DYN0960 !! I think A-Main has them ? So act quickly before they get sold out again and go back on to Backorder again . Again the part number is DYN 0960 and it’s not a LRP part it’s a Dynamite part and it will work!!

[@mikeyg4374]

BOTAJELL cool and what kind of starter box do you use for your losi 4.0 truggy ??

[@BOTAJELL]

Mikey G this is the box I love to use ! kzbin.info/www/bejne/b4G3qqqtd7WkfZI

[@luisrosario1112]

Hi my friend, I'm definitely going to change my engine on my rtr losi truggy and I was looking for the Novarossi 28-8 stock but I just see this video and right now I'm confused about in which ones to buy 😭😂😂, can you help me to choose? Lol Ones again for your help brother!!!

[@BOTAJELL]

Luis Rosario I say get both lmao 🤣👍🏼!!! At least start some where you can get one or the other ? I love both of them! Try a LRP .32 X series because you may not see them in the future? We don’t know what’s going on with them so if you see it buy it ASAP!! You can always go to Novarossi Direct .com and get yourself a 28-8 Engine. And if you want a Modified Engine go to RB Mods because I know he’s great at what he does because Neal is no longer taking any orders!

[@luisrosario1112]

BOTAJELL 😂😂🤣 thanks again my friend you always help me and I'm very grateful for that. I will let you know how it went 😁👍

[@BOTAJELL]

Luis Rosario cool bro but if you want a motor like this one ? You must act quickly before there are no more because it looks like March 1 they may be done??? I more?? I hope not but that’s what I hear so I may be getting another for myself to keep in stock!! You want this bad boy in your collection trust me! In a couple of weeks when more people know about this ? The price is going to skyrocket on these LRP engines. My friend just bought 2 LRP.32 X series Spec4 engines from A Main and another friend got one off eBay. Novarossi .28-8 is a must also but you can get it afterwards. Another great engine that is a must when there available is the Picco Boost .28 Engine!! Just so that you know .

[@luisrosario1112]

BOTAJELL ohh waowww, I will check that today, I don't want to pay crazy money lol Thanks my brother 😁👍

[@karriebhurgari3933]

Hey John I'm torn on what to get if I should get a Skopod 62cc or a obr g320 reed what would you recommend. Or should I a get a rc max 46cc (It would take forever but doable). Also I think the dynamite turbo plug convertion would work on this motor. Please respond

[@BOTAJELL]

Karrie Bhurgari bro you know me already I say get all of them!!! Zeeeeeaah!!!!! That’s what I did lol ! Don’t get all at once but just start somewhere. Get 1 engine at a time . RCMAX is next level shit and over powered and you must upgrade everything on your Rig and it’s a beautiful engine and a must have either now or later it’s a must have! SkoPod is great as well and cheaper . Wish mine had the Trevor Simpson head but I don’t! SkoPod s were great torquey reliable engines for Go-Peds so when they got it to fit an RC I always wanted one and now I do. I will have to make my own outerwears for it. OBR G320/340 Full Mod is a great Engine also but not on the power or torque level as the other 2 engines but it has plenty of torque to push and have fun with MTXLs and Losi 5Ts and Vecta 5s ! Even a Full Mod Piston Port none ReedCase OBR can do the job !

[@karriebhurgari3933]

I wish I could get all man I think in about the Skopod instead of buying the Skopod I'll build my own I'll buy the conversion kit and install kit and these guys sell a modded g62PU (skopod engine they start with) i think that what I'll do for right know than over time get all! ZEEEEEH

[@BOTAJELL]

Karrie Bhurgari hells yes that sounds great bro! Let me know how you like it because if I can’t come across my Trevor Simpson Head that I want for my SkoPod I may do that instead? But first I’m going to run mine the way it came to me from DDM as a Losi 5T SkoPod kit . Good luck 🍀 to you brother and stay in touch with your build.

[@karriebhurgari3933]

I'm thinking about building a skopod or building a custom 70cc I'll let you know on what I'm choose to do I'm currently trying to sell one of my nitro's to get money for the build!!! Hopefully you find the trevor simpson head for your skopod!!!

[@karriebhurgari3933]

I'll build my own 70cc if I can aquire a alx or rcmax 70cc crankcase, but the parts I'll use are stage6 vforce3 reed valve, stage6 70cc racing cylinder, wj71 carb, ufc clutch, rcmk ignition coil, marine flywheel (not decided what brand), and bzm crank. Hopefully I get a alx or rcmax crankcase. Should work because rcmax uses the bzm crank and stage6 reed and head.

[@karriebhurgari3933]

Sweet engine man I think that is the same carb that's on my 30x.

[@BOTAJELL]

Karrie Bhurgari it could be? Supposedly the new carb is insulated a bit better from what I was told? Did your 30x come with 9mm vinturie? I used to install Nova carbs on my friends 30X .

[@karriebhurgari3933]

Yup It came with a 9mm venturi hopefully it's different.

[@curtissato]

BOTAJELL how did this motor hold up? i want to buy this motor for my boat .

[@kellynash1981]

Where do you get your Chrome work done at if you don't mind me asking

[@BOTAJELL]

www.nassauchrome.com/ 👍🤝

[@wess6838]

Hey BOTAJEL! just bought a backing plate for my dynamite .28 engine and when I tighten the four screws the piston locks and doesnt turn. also do you need the pin and spring for the piston? thanks so much!

[@BOTAJELL]

Bl!SS I show everything what to do in a 3 part video!! This is part 1 kzbin.info/www/bejne/bqDbeJKBZaejjsk

[@BOTAJELL]

Let me know if you can’t find part 2 and 3.

[@wess6838]

Thanks BOTAJEL! just found out it was slightly rubbing against the piston and sanded it down to the point were it wasn't touching it.

[@BOTAJELL]

Bl!SS bro if you had to sand it down something is wrong seriously! Either you got a wrong back plate for it or you forgot to remove something off the engine? Did you see my past videos I did with that Dynamite .28 RTR motor yet? Just copy what I did and make sure the part numbers match up!! Do not fire up that engine before it may blow? Make sure you remove the little spring off that belongs to the one way bearing set up

[@wess6838]

Sorry I did not reply but I made sure to completely remove all the pull start shit and make sure everything was sealed properly and she runs great 👍

[@williamkeeling7666]

I have a team AE mgt only thing is I have to run a spin start or pull start because I haven't found a way to retro a bump box for the chassis do you have any ideas bro

[@BOTAJELL]

Unfortunately we can’t run better nitro engines that are sealed with back plates on or MT’s but try to get a decent engine with a roto or pull start to use on them . I also have a mgt in my collection with the .50 in it but I highly recommend people to get on and move up to the Truggy platform . Truggies will always our run , out perform, and out handle any MT!! But sometimes it’s fun to run a MT because there a challenge or it’s just fun to buy an old MT and rebuild it back to life just for the fun of the build so everyone is different why they still like to hold on to there MTs

[@williamkeeling7666]

@@BOTAJELL I'm a big fan of the 2 speed reverse transmission for the novelty of it it's just cool to hear a lil truck shift while its hauling ass down the street I'm probably going to go with a lrp .32 like the one in this video but they make a pull start version it has a .21 in it rn the original pro 21 thunder tiger engine it came with I got it used in the original box with like 2 tanks on it

[@brucebartlett1950]

Were can I get a backplate for a lrp 28 spec 3. Xtec thanks in advance away learning from ur the rap man for sure.

[@BOTAJELL]

Rick May have one www.rbmods.net/

[@godsun358]

Bruh what pipe & manifold do you suggest a set for onroad and for offroad.Off-Road. I look through the comments and found the answer bro... Keep doing what you like and enjoy

[@MandatoryBunnyShift]

Hey John - Do you know anywhere I could get a replacement head button for the LRP .32? The official part number is LRP #38578, but unfortunately it only appears to ship to Europe from LRPs website. Can't find the part anywhere. Do you know if any other head buttons are compatible with this engine?

[@BOTAJELL]

Call Rick from RB Mods to see if he has any spare LRP heads or whatever f he still has others that will work on it. www.rbmods.net/ my brother in law may have a spare head also but he’s away on vacation . First find out from Rick

[@MandatoryBunnyShift]

@@BOTAJELL I contacted Rick and he also stated the part is very hard to find, and he would have to custom cut one and would be way too expensive to be worth it. I'm torn, because I really can't justify buying an entire new engine just for one small part. I'm hoping there is some other head button out there with a compatible fit for the LRP .32?

[@BOTAJELL]

MandatoryBunnyShift if your engine is modified or if it’s still new in stock form ? I would get a one of a kind beautiful head Custom made from Rick. It would be super beautiful and cool way way better!!! But only you know what you got in your hands and if you can make that choice. I hope you get one . P.S. If Rick makes you one ? Tell him to make you a Next Level Head for your LRP 32 that uses a turbo head Haha ANY ?’s

[@MandatoryBunnyShift]

@@BOTAJELL Mine is stock. You're right, it would be cool to get Rick to custom make one, I'm just afraid the cost would be too high to justify, and would make more sense to put the funds towards a new engine. I may just get a modified Nova 28-8 from Rick. In your opinion, how does a modified LRP .32 stack up against a modified Nova 28-8 for bashing? I haven't really seen a lot of direct comparisons between the two. It seems Novarossi wins in quality, has better part availability in the United States, but I still liked the concept of a large .32 engine.

[@royarsey5429]

Hey John,i'm gonna be dumb on this question coz i'm a newbie..hehe.ok,When modifying nitro engines...what is or needed to be done or replacing any parts? Thanks Bro! i know this will bore you..lol

[@BOTAJELL]

Roy Mariano it all depends on what motor you are Modifying because some motors will need a different carburetor or a Modified carburetor from a different motor and some guys Drag race and some guys off road race and some guys bash so the best thing to do is talk to the guy you like that has bin in business for a while now or from the guy that has done good work for you in the past like for me out of all the guys I’ve used my favorites are Neal from TNS and Rick from RB MODs!!! They have done some great powerful and reliable engines for me in the past and I have proof of everything I’m saying! There some new guys out now but I can’t say anything about them because I have not yet tried out an engine from them yet so I can not give honest opinion yet! Most of the time you have to let them know what your going to do with your nitro so they can Mod it to perform for what your doing like a drag racer that runs 65 % nitro in there Modified engines are night and day different then like a guy like my self likes his engines or a off-road racer that races at tracks . All different ways of modding Engines. Some guys give the motor more compression some guys lap the piston some guys DLC coat the cranks , bearings , Port the sleeve, change the timing of the engine, Port the crankshaft, sometimes give the engine a raised exhaust port. There are many ways for different people that like to run Modified engines.

[@420flipside]

wat make was the gas motor u showed ,im in uk ,we dont have so much shit over hre

[@BOTAJELL]

Phil that engine came from the UK 🇬🇧 it’s a RCMAX ported 46 with billet Head and pull start

[@toyota218921]

How's the new LRP carb been ??

[@BOTAJELL]

naveed khan I personally have not yet used mine so I can’t honestly give you an answer about that but a friend of mine liked it better then the past LRP carbs but he likes his Novarossi carb better that he now has on there !

[@mrsideways4574]

You got the last one man there on back order and it that yours or no

[@BOTAJELL]

Mr. Sideways lol o man so I hear !!! LRP needs to step it up and have motors ready for the people like us! Yes this is my motor .

[@mrsideways4574]

BOTAJELL went are you putting it in?

[@BOTAJELL]

Mr. Sideways don’t know yet? Definitely in a Truggy but I don’t know witch one ?

[@tyranducksworth1913]

It’s getting harder to find a good name brand nitro engine I just picked up 2 dynamite.28 big blocks

[@douglasebrandeljr4754]

LRP is not going to stop the .32 they are just low on stock but you need to get some glow plugs amain is out of stock I did talk to them they are talking about making a spec 5 I just need to get some glow plugs for mine and yeah the jack dempseys like their tanks the way they want them. My piston was down when I got mine I did place a few drops of after run oil in it before I turned the crank shaft but I did at tdc place a few more drops and rotated it again to really coat the sleeve have fun with it...nitro gas forever RCing fun for life peace out

[@BOTAJELL]

shiner-RC I have a ton of glow plugs still. I stocked up on many glow plugs from them 3 years ago. Thanks for the heads up! Let me know what you hear about the Spec 5 ?? That would be cool ! I hope they will do a Turbo Head Race inspired 32 X. That’s another easy extra 1,200 good RPMs we could all have. Zeeeeeaah!

[@JamesWilliams-qv6vc]

Hi have a question I want to get this motor for my T-Maxx form Traxxas can it fit on the car?

[@mrsideways4574]

I can get one because I have some family in the uk that can get the motor for me then send it to me because they have them on the main German website so I’m very happy about that Edit: How did you get it

[@walker1474]

Who do u get to mod your nitro engines? I like Murnan Modified motors he does a bad ass job on his motors and his racers dominate all over the world

[@BOTAJELL]

Daniel Walker I use Neal from TNS and Rick from RB Mods! I have used 2 others but I will not mention there name because it was a waste of time and money for me and I do not want to see others get burned like I did. I don’t go for much of a race Modify job I want a Brute Modified jobs on my Nitros for bashing and keeping up with the E words

[@jdd7998]

How is this engine started? Pull start? Drill start?

[@BOTAJELL]

The best way Bump Box! It’s a sealed back plate engine just like a race engine is . Stay away from pull , drill, and EZ-start crappy nitros ! Sealed engines run the best and you will be much happier with no headaches and longer runtimes

[@jdd7998]

@@BOTAJELL can you provide a link for a bump box? Will a bump box start any nitro engine?

[@BOTAJELL]

jdd7998 www.amainhobbies.com/team-losi-racing-8ight-8ightt-2.0-starter-box-tlr99059/p244826

[@gorillazombies189]

Finally nitro!

[@BOTAJELL]

Lol! It’s Nitro all the time in my house brother!!! Zeeeeeaah!!!

[@BOTAJELL]

I have lots to catch up on with my Gas 5th scales so There will be less time for my Nitros.

[@miguelvelez116]

Oh man I will be getting one of this and nitro boss pls run that thing stick I appreciate your opinion thanks for this video Bro

[@5thSCALERCINSANITY]

Any questions?

[@Thebankfisher]

Is this direct fit on an hpi Savage and Hellfire 4.6

[@BOTAJELL]

No this will fit on a Truggy and Buggy platform! Try to get you a Truggy . You will never go back

[@Thebankfisher]

@@BOTAJELL the Hellfire is a truggy it's 1/8 has the 4.6ho stock

[@superaidenproductions1870]

Hell ya e word Oreo, I have always said electric is better than nitro until the last 3 years when you and my own personal experience, just went out for a bash with my Friends, there e lasted 30 mins then they were out of battery’s , while I was brapin away, nitro forever!!!! Going to add another nitro to my collection, got a rs4 savage tmaxx jato and now I’m going to get the losi 8ight t!! You helped me diside I want it too!! Any needed upgrades other than a back plate?

[@bajamike3803]

What did Neil say? He is retiring? If rick and Neil go who’s left?

[@BOTAJELL]

Alien Bounce I hope Neal just needs a break for a bit and I pray that he will still mod some Nitro engines in the future! Rick is the oldest and has bin around the longest and I hope he still stays does what he does and keeps at it! He’s is also one of the great ones! I’ve had bad luck with 2 other guys that I won’t mention at the moment. There is another new guy out nowadays that’s doing pretty good things for the racers but I want Brute Power Not smooth power: and I can’t recommend him yet because I have not used one of his motors yet so I can’t give people my honest opinion!! I will Not Lie Or Make Shit Up and if there shit sucks ? People will know because I will never mention them or if people ask me about them then I will tell them. I only mention company’s that works great and works well so if I recommend them to others or my subscribers I know they will be in good shoes and most importantly that will help the Nitro RC hobby grow again!

[@Harvz78]

I can’t find this engine anywhere.

[@BOTAJELL]

Harvz B bro just keep trying. Email them and call everyone like A Main and others !! Also try to call the guys that Mod Nitro Engines because they usually stock up on Nitros so they they have them in stock to Modify and sell to costumers . Call Rick at RB Mods ! I know Neal from TNS don’t have any extras and the ones he has already have owners for them!

[@Harvz78]

Got no luck brother, everybody out of stock. I guess I’ll just get the Rex 28-8 for my new truggy.

[@BOTAJELL]

Harvz B 👍🏼NOVAROSSI 28-8 is great and the Picco Boost .28 is great as well but the Nova is easierto tune . One day when your ready for the next step and want more ? You must try out a Modified 28-8 from RB MODS or TNS but TNS is not doing Work like he used to.

[@cj599]

i got a 4.1 and its junk wont take a tune and the liner piston look bad after 1.5 quarts

[@shsdh2318]

I love your fish

[@BOTAJELL]

Shs Dh thank you!

[@strengthstuff7618]

nice motor there

[@BOTAJELL]

outdoors and rc's lawncare thanks !

[@strengthstuff7618]

welcome bro!

[@cesarrocha7817]

I’ve heard that LRP is going out of business, as of March everything will stop production for engines

[@BOTAJELL]

cesar rocha yes the deal did not go threw so now there better off going bankrupt over in Germany. It a shame because there were on the way to take us nitro heads to the next level.

[@farhan4913]

If I want this where can I get it

[@BOTAJELL]

www.rbmods.net/ 🤝💥

[@jeffwelch7007]

Anyone know we're I can get my hands on a 8.0 for the mgt team associated

[@BOTAJELL]

Get a LRP .32 instead or a Novarossi 28-8 or the new Picco .28!! Way better then 8.0 but if your restoring to original condition? I understand how you feel! Look on eBay

[@jeffwelch7007]

@@BOTAJELL what makes the LPR better and not sure if i can line it up in the MGT

[@BOTAJELL]

Jeff Welch I have mounted many LRP 32’s in MGT’s 🤣😂!!! You will need a roto or pull start one . Unfortunately you can’t run the better X series style LRP engine unless you have a power robbing and heavy oneway bearing setup to use a pull start.

[@bryanbarnhart9782]

Nice

[@BOTAJELL]

Bryan Barnhart thanks !

[@dancieszynski9555]

Lrp is closing its doors ive heard

[@BOTAJELL]

Dan Cieszynski yes man it’s sad ! Supposedly the deal did not go threw because they owed to much money to companies because of all their electronics took a crap!!! There Nitros did ok for them but it was not enough to pay for what they owed on the LRP electronics line!! Fucking E words bro. The owner said that there better off going bankrupt in Germany.

[@ChrisXCXCX]

No goddamn backplate or pullstart included?

[@BOTAJELL]

Yes the new X LRP .32 is race inspired and it comes now with a sealed back plate ! No more bull shit one way bearings with pull starts and roto starts . Bump box only .

[@ChrisXCXCX]

@@BOTAJELL no bump start on a truck. Guess this should not be used on a HPI savage

[@BOTAJELL]

ChrisXCXCX definitely not . Get a real platform like a TRUGGY . It will put handle any Nitro MT on the ground or in the air . For a discontinued savage I would recommend a stock Hpi savage 4.6 engine or this bad boy www.novarossidirect.com/TRUGGY28-8-Pull-Start_p_3461.html but I would not waste any money or time on a discontinued savage any more . It’s time to upgrade to better nitro engines with back plates bump box starts only on a Race Truggy Platform.

[@DonaldByrd1970]

Imma have to this one in 3daYS Bo,

[@BOTAJELL]

Donald Byrd I don’t blame you. If I ever come across a .30 X ? I’m getting it also!!

[@makenitrogreatagain977]

Let's see it run as is in your truggy b4 u send it to TNS. Please!

[@BOTAJELL]

Make Nitro Great Again maybe??? But I rather break her in properly after modifications has bin done . Don’t know yet but I would definitely love to find out how it is right out of the box! I’m sure we will see this from one of my buddies.

[@keithbates8482]

@@BOTAJELL What up bro? Do I need the losi kit engine mount for the losi 8T rtr so it can drop my engine some

[@Harvz78]

Hey bro I just got 4 from Amain before they disappear.

[@BOTAJELL]

Harvz B that’s the best thing to do!!!

[@Proto2o]

Check out AMR for motor mods. I think he is top notch aswell.

[@BOTAJELL]

Proto2o I haven’t herd from him yet. If you talk to him have him call contact me . My friend Anthony the owner of LI Bash wants me to tune his AMR MODIFIED 28-8 and to see what I think of it compared to my TNS 28-8 and RB Mods 28-8. Do you have an engine from AMR ? If so what did you go with? I hear from some friends that he does a great job for racers the just race at race tracks and it’s more for smooth power. I’m looking for Brute Power I don’t care about smooth power bands at all. I hate being Cock Blocked know what I mean?? Lol! What’s up bro how you bin man? Are you done with the street racing for r still at it?

[@Proto2o]

Just going with what I have seen in his work and dedication. I no longer street race my car...I now play with sport bikes! HAHA, Brute power....is hard to come by without Neals work IMO. I would like to know the comparison between each. See if my thoughts are correct. lol. Check him out on facebook!

[@BOTAJELL]

Proto2o bro I don’t do face book but give him my email if he wants my serious opinion because I may conceder giving him a try? But I have some questions about the work he performs. Do you know if he has a Dyno ? Or is he just talk? Anyways my email is [e-mail] thanks for the heads up brother and I’m glad your done with the street racing!!

[@mrsideways4574]

Are you watching the game and if you are who are you going for

[@BOTAJELL]

Mr. Sideways bro I’m watching the game and trying to catch up on all my emails with this comments shit it’s driving me nuts and takes up way to much of my time lmao 🤣!! Patriots!!

[@narongrachmareongsit1978]

❤😂🎉😢😮😅😊. ไฟแอดพ์. ?

[@mrsideways4574]

If I want to buy that motor off of you would you sell it to me😅??????

[@BOTAJELL]

Mr. Sideways sorry nitro brother I can’t!!

[@mrsideways4574]

BOTAJELL do you think the 28 8 has the same torque

[@BOTAJELL]

Mr. Sideways there both great in there own different ways and there both a must to have in your collection!! Also the Picco Boost .28 is another must have in your collection but make sure it has the 2 needle carburetor on that one because everyone I know with a Picco Boost motor with the 3 needle midrange carb has problems with it. LRP .32 and the LRP .30 are great engines

[@420flipside]

nosram .32's and all there motors are same as lrp ,its same company just dif branding,why dont u get into modding yr own motors seein yr engine nut,start on sime yr cheaper motors,if u have as many as u say ,give it a go,open a tns and see wat he does ,zeaaaahhh

[@terrytaylor1187ify]

Sell me a motor

[@BOTAJELL]

Terry Taylor man I hate to sell my engines! I love ❤️ them all even the shity ones. I’m an Engine hoarder lmao 🤣

[@terrytaylor1187ify]

BOTAJELL 😂😂😂