TLR 8IGHT-T 4.0 NITRO TRUGGY KIT - LRP ZR.32X SPEC 4 ENGINE - PART 6 BUILD SERIES

[@BOTAJELL]

Nice 👍🏼 job Chris!

[@EVERYDAYRC]

Thanks Johnny! I couldn’t have done it without your input buddy!

[@Happygrowercbris420]

Botajell 🔥🔥🔥❤️

[@5thScale]

I love the turn out of the project and all of the parts used everything is just beautiful, can't wait to see it run!

[@EVERYDAYRC]

Thanks a lot man I’m glad your Joying the project so far. I am loving how everything is turning out

[@karriebhurgari3933]

That motors sick 🖒🖒 your gunna have some Sirius fun with this truck!!

[@EVERYDAYRC]

I hear that bro. I can’t wait to have some real deal fun with this beast

[@drchaosrc724]

Hell yeah 😂😂😂 nitro power👍😁. Once again awesome video my friend👍👍👍👍

[@EVERYDAYRC]

Thanks a lot Miguel I appreciate it! Happy you enjoyed the video bro! 😊👍

[@richardgordon9649]

Makes me want to run mine right now!! Nice set up Chris!

[@EVERYDAYRC]

Thanks a lot Rich I appreciate it buddy. I couldn’t of done it without your input! I would love to see a running video of yours soon on your channel!

[@5thScale]

Richard Gordon can you release some more videos of your cars especially your mtxl!

[@jeffmays7192]

From TNS? Neil kicks ass and his modifieds are the best!

[@sn47som]

Is he still working? He never returned my email.

[@jeffmays7192]

I see his website is up and taking orders. It does say expect longer wait times as he is swamped. Nice build!!

[@atvadventuresalbertcountyn1831]

Good job Can't wait to see it running

[@EVERYDAYRC]

Thanks I appreciate it I can’t wait to see it running either!

[@MrBRC]

Everything is looking great brotha.one thing I will say tho on your epa open it up a little bit more.your carb should open until u can see the fly inside the carb any more.but like u said don’t set it to far that your servo is stressing. Also when u put on the brakes the carb should not move when u release the brake a couple more little adjustments and your going to be ready to rip can’t wait to see it fly

[@EVERYDAYRC]

Thanks bro I appreciate it! I figured that I needed slightly more travel on the throttle. I will open it up another one or 2 mm to get this Beast breathing as much as I can!

[@JOHND_RC]

That’s awesome Chris 👍🏼👍🏼 I can’t wait to get me a LRP !!!

[@EVERYDAYRC]

Thanks bro I appreciate it. You need to get yourself one before they are no longer available. Go pick yourself up an xseries before you can’t get one anymore!

[@krlaturn]

Great video my brother! You my friend have endless nitro knowledge bro! It’s crazy just how much you have to share! Keep up the good work! Can’t wait to see this work of art run!

[@EVERYDAYRC]

Thanks a lot my good friend! I enjoy the mechanical aspect! I can’t wait to fire this beauty up too!

[@nitro4lifenitro4life89]

Love ❤️ this video! This is more like it thank you Cris👍🏿

[@EVERYDAYRC]

Glad you enjoyed the video bro!

[@RcBasherBoi]

That looks wiked cool. Hope you do a running video of this soon.👍

[@EVERYDAYRC]

Thanks bro it’s looking amazing so far. I will be having running videos very soon as soon as the weather starts to get nitro break in worthy. Having another nor’easter on Tuesday crazy

[@33boblong]

Looks great Chris can't wait to see a running video ...one thing i wanted to mention maybe at some point u might want to get the losi aluminum servo horns for the steering an throttle but man that looks badass I'm still wanting to get one

[@EVERYDAYRC]

Thanks a lot bro I appreciate it. I am definitely looking into getting the aluminum horns. With these powerful servos I can guarantee I will at least strip the steering servo horn. I will be picking them up ASAP

[@ddrc6437]

Almost done👍👍👍 looking foward to see how you paint that body

[@EVERYDAYRC]

Thanks a lot bro! You can be sure it’s going to be an awesome paint job

[@twinturbotony93]

I just picked up two of these. I plan on getting them modded and destroying brushless cars.

[@EVERYDAYRC]

That’s awesome! Get em while you can bro!

[@nitrotime6690]

I just got two of them two !!!!! Smoking the electric cars nitro all day for me

[@grimthenoble]

HA, im a nitro guy but theres no destroying brushless.. but one can dream

[@AB-80X]

Rocky Rodriguez Really huh? You're smoking brushless truggies all day? Sounds like you're racing against Traxxas ttuggies... Too bad you're not in my neck of the woods. I doubt you'd keep up with my ET48.3. I have 12 hp on tap and instant torque. I run nitro as well, and I love it. But I also know what the limitations are.

[@2_be_determined]

If I was a nitro guy this would be my first choice! Maybe someday. Nice video 👍, very informative.

[@EVERYDAYRC]

Thanks bro. I’m glad you found the video informative and if you were ever to go nitro this would be the way to go. This engine will rev almost 35,000 RPMs. If I get it modified I can get possibly 44,000 RPMs which is comparable to a brushless system running on 6S lipo batteries. The Innovation is in the racing kits. Make it happen bro

[@nitro4lifenitro4life89]

This engine here has potential of being Super bad ass if done up correctly . Even stock there fun and no slouch

[@Chaseblackburn7]

Awesome buddy!!! love it

[@EVERYDAYRC]

Thanks bro!

[@stwright318ify]

You said after each run you suggested to have the Piston at bottom dead center. With the truck assembled how would you know it's at bottom dead center? Can't wait to see the final product

[@EVERYDAYRC]

Yes I did say that! I know it was a long video but did you watch the whole thing? I talked about that at the 22:00 mark. Go back and listen to what I said and you can use that technique on all your nitros. I’m glad you enjoyed the video and found it informative. I can’t wait to get this beast running

[@trx4x4slash85]

We need more build serices....awesome viedo

[@EVERYDAYRC]

Thanks a lot bro! More to come!

[@thecman26]

I've seen people run the cooler on the fuel line as well as the charge line. Idk if it helps. Fwiw metal clothes hangers are great to have for exhaust hangars, much cheaper than a sway bar and plenty stiff!

[@nitrohead70Mats]

Very nice job 👌

[@EVERYDAYRC]

Thanks aLot bro!

[@denniss7805]

Hey Chris! Did you ever post running videos? Would LOVE to see, I just bought a rtr Losi 8ight T. Been thinking about getting a 32 aswell

[@jamie66233]

You should have gone with the nova 28-8 lol! I know this was 3 years ago but thats right around when nova went out of business! Still a good choice tho! Now you need to try the .32x 4.1!

[@cripticcustomrc7043]

AWSOME bro I understand the purchase of that motor and don’t blame you one bit as I raced nitro touring almost 20 yrs ago it’s nice to hear the names I remember novarossi was my wish list motor as I always ran is max motors with ofna heads now that I’ve gotten back in the hobbie I just can’t get away from brushless and it’s not that I don’t like nitro because I really do but I think as time for me has moved on to easier maintainer that is an AWSOME build and I know if I had gotten back into nitro I’d be blowin ya up askin all kinds of questions 😀 Thanks bro for makin such great and informative vids ✌️✌️👊

[@EVERYDAYRC]

That’s awesome bro I love on road nitro! I love all aspects of a hobby and I have a huge collection. I completely understand where you’re coming from as far as moving to brushless. I started with nitro been moved to brushless and now I wanted a good taste of a high-quality nitro and that’s why I decided to build this! One of these days You should give it a thought and possibly get yourself a high-quality nitro racing kit to tool around with! Thanks for watching I’m glad you found it informative

[@cripticcustomrc7043]

EVERYDAY RC you were one of the very first people I started watchin when I got back in the hobbie around October 2017 and from you and others like you I have certainly feel right back in the hobbie rocbud43 is always speaking very highly of you and I am so glad to have met great people like you I actually have a Nitro RS4 3 I just got from a guy that needed some cash it’s in very new condition and on the fence about weather to convert or get it running it’s lacking the engine but other than that it’s rtr with a few upgrades i have it on the back burner right now as I’m learning the hard way I can’t work on them all at the same time and have a hard time staying focused on just one 😀 if I did do nitro I’d probably have to bug ya about motors because I’m still an os guy and not sure they are still around I know how to port and polish os motors and other little trade secrets but as far as what’s avalible no clue I am still on an rc budget so that’s another reason I didn’t rush the nitro thing thanks for the advice bro and I’m sure you’ll here more from me

[@EVERYDAYRC]

That’s great to hear bro that makes me smile. Rocbud is an awesome dude! He has done a lot for the hobby as well. Sounds like you’re getting your feet wet with all of your projects and don’t overwhelm yourself just take one thing at a time. Sounds like you got a few awesome projects on your hands! Feel free to reach out to me whenever you want!

[@cripticcustomrc7043]

EVERYDAY RC thanks bro means a lot and havin good peoples support means a lot and I will deffinately take you up on your offer for the help as I am always full of questions about this brushless stuff lol and the projects are line up in order as impotence I’m working on my vaterra v100 right now as I plan to race it down in nc with amazing Rc I had servo issues and figured out after 3 servos the Lodi horn I was using was to short so I’m back on track and thanks so much my brother for keeping this hobbie fun and imformative

[@mrsideways4574]

I just got my 30x in my truggy this thing is insane nice build would love to see the 28-8 in there

[@nardo2354]

Thank you

[@EVERYDAYRC]

You’re welcome

[@douglasebrandeljr4754]

The carb. works great I have had no problems with it so far I just need to rich it up a little and yeah that engine has a lot of power I love it I posted a video with it running keep it going nice work.... nitro gas forever what is the part number for the air filter and where to purchase it at thank you, I also used the Reds clutch 4 shoe adjustable they work great

[@michaelgreer9614]

Great build man! Have you ever considered building a soar seiki td1-R truggy kit?

[@EVERYDAYRC]

Thanks a lot man I’m glad you enjoyed the build. I have never heard of that truggy kit but I will check it out

[@johnwolff3206]

what number exhaust header and pipe did you use please ? never mind , i went back to the beginning of video and got it .

[@erikedwards5744]

I’ve just purchased an LRP ZR.32 I’ve watched your video 4 times and I keep missing where you got your clutch and shoes you used from. Could you be so kind and send me a link and possibly part numbers.

[@EVERYDAYRC]

Hey how’s it going?! 11:31 in the video! I use the dynamite MaxLife clutch shoes. Explain what springs I use in the location as well. Hopefully this helps!

[@nardo2354]

where can I get some of that steel braided fuel line?

[@EVERYDAYRC]

I believe that this braided fuel line is RB innovations . Here’s the link www.towerhobbies.com/cgi-bin/wti0001p?&I=RBVQ1475&P=FR&atrkid=V3ADW3A24148B_45992359666_pla-302478605406__221282308797_g_m_pla_with_promotion__1o2&gclid=EAIaIQobChMIn5D_hYTo2QIVklmGCh27qwHHEAQYAiABEgIJzPD_BwE

[@jermainemurda6978]

How do u take out the carb I need to turn it around I took the screw out but out budge a bit

[@lukemorrow9773]

Do you have any problems with your rear diff with that powerful of a motor ?

[@EVERYDAYRC]

Haven’t run the truck year but I didn’t install 50,000 weight diff fluid in the rear and I made sure to shim the diffs when I build it to account for wear that will take pkace

[@RCTrxMicros12]

Do I need to have a back plate on the engine? If I do, is it included in the kit for this car?

[@BcHmF]

Is losi still using non-metric screws?

[@EVERYDAYRC]

Yes all their hardware is standard

[@BcHmF]

Ähm.... I would HIGHLY prefere METRIC ONLY :D

[@hortonsweeping]

Do you know Botajell

[@EVERYDAYRC]

Yes John is a friend of mine.

[@mikeinvegas1]

Can i use the pipe im using for my rb .21 motor? Or bigger motor needs different pipe?

[@luisrosario1112]

Hi bro, I love your videos and I want to know if you can help me with this... I have a Novarossi 28-8 modded in a 4.0 same as this one and I don't found any nova glow plugs for this engine, can you tell me another one can I use for my engine? Thanks in advance 🙏

[@jdportwerks6795]

What pipe did you use

[@jasonauteri2129]

Please do a break in video for this truggy. I have the same set up but never used a nitro engine before and can use all the help I can get!! Great videos btw!

[@EVERYDAYRC]

I definitely will man. I have some projects to get done first and some other things I need to work on this truck and then I will be doing a video and hopefully he can help! Thanks for watching and glad you enjoyed the video

[@jeremyhelminiak5178]

What engine mount is that?

[@EVERYDAYRC]

TLR that came with the kit

[@mrsideways4574]

If the bearing go do 3 to 4 for the spacers

[@EVERYDAYRC]

Thanks I installed 3 could use 4 I feel

[@royarsey5429]

is that header/manifold good for mid-range off road runs? i see most of my racing buddies uses the longer manifold like a U-shape...nice Video ! thanks

[@AB-80X]

This engine is surprisingly carefree when it comes to headers and exhaust - use what fits your project the best physically. However, it really likes a lightweight flywheel for midrange punch. i use the lightweight low inertia REDS 32mm flywheel. Try the REDS Tetra clutch with XH retainer and 4 alu shoes, best upgrade to any offroad rc with this engine.

[@SixShooterRC]

#1😎

[@EVERYDAYRC]

👍😊

[@Harvz78]

What is the Savox servo model are you using?

[@EVERYDAYRC]

kzbin.info/www/bejne/q6SQc3ivf76sfJI Check out my electronics video. I’m using the 1272 sg For throttle and brake and 2270 SG for steering

[@Harvz78]

EVERYDAY RC Thanks!

[@royarsey5429]

you need a cameraman to video the assembly..nice tho..keep it up !thanks

[@EVERYDAYRC]

Thanks. I’m a one-man production team bro. Just wanted to share the build

[@jeffmays7192]

It's awesome man! Thanks for the inside scoop! Do you John from BOTAJELL? Pretty much everything you are saying is exactly what he does. He's truly the master of nitro imo.

[@travismuhler]

Glad you did this. I’m building the buggy now, and the instructions are not that great.

[@EVERYDAYRC]

That’s awesome to hear! Glad you found the video helpful!

[@JRBORIQUA7]

Yo, update the quality of your videos they look blurry !! Still gave you a like tho!

[@EVERYDAYRC]

When the video is first uploaded the quality isn’t good. It will be in 4K in a couple of minutes. Thanks for watching bro

[@JRBORIQUA7]

Great thanks !!! Good video !!

[@MarinerRCAdventure]

Great video! Just sub your channel..

[@kx250rider09]

now the 28-8 is out of production too lol

[@EVERYDAYRC]

I know I heard all about it. Hopefully they will be coming back there is some updates going to be available in the near future.

[@kx250rider09]

I'm sure something will happen I just tried out a diff engine for a change I'm running a hudy fx k3 .21 dlc coated and I'm really happy with it not a lot of people are running them in the states their real big overseas

[@troyandersonnitrorc6180]

PLEASE I BEG YOU when it's time to run your whip PLEASE run it with the body on cause I hate to see you scratch your beautiful cooling head. One sweet looking motor. But PLEASE run it with the body on 🏁🏁💯💯🏆🏆🥇🥇

[@stevem9141]

You should have used the same clutch springs on all 4 shoes. Now you will have 2 shoes engaging before the other 2. Don't see the point of that. Less grab and uneven wear.

[@ryaneddy4487]

Can anyone give me some links for everything that I need as far as flywheel clutch clutch bell clutch shoes and springs for the LRP .32?

[@aciddyt2413]

First

[@EVERYDAYRC]

😊👍

[@AB-80X]

I would have bought a much better clutch and a cheaper exhaust header. M2C Gen 2 4 shoe or REDS Racing Tetra 34 would have been much better for your application.

[@AB-80X]

I just installed a Rotostart on my LRP 32 X. Here's a fact from the real world. NO DIFFERENCE inperformence, NONE! Same lap times, same top speed and so on.

[@Cardiakk]

That's a lie because from physics alone, there's more rotational mass on the crank from the pullstart assembly.

[@AB-80X]

@@Cardiakk Right. Go away if you don't bring anything to the table.

[@ryanlindahl2714]

I heard nothing but problems for that motor

[@rcnitroguy9317]

(Nova) (rosei) lol it's Novarossi bro