Thanks for watching! Side note we misspoke, the donor truck is a 378 not a 379.
@ohiofirstresponderpics42956 ай бұрын
Will we see a 2024 Welker Farms Equipment Tour soon??
@WelkerFarms6 ай бұрын
@@ohiofirstresponderpics4295 thinking this should happen!
@ohiofirstresponderpics42956 ай бұрын
@@WelkerFarms Looking forward to it!! :)
@Ralph949676 ай бұрын
Might be worth rebuilding the engine for a possible upgrade to any projects you might have in the futre bet one of those big buds or stigers
@bobbob-fg5wy6 ай бұрын
Isn’t the sump now sitting on the front axle. C12 worth fixing maybe. They went up to 450hp
@eddiebaughman28096 ай бұрын
This proves the Welkers can do anything. Great mechanics and farmers
@fermanlee46716 ай бұрын
Father and sons soon to be father sons and grandsons there is nothing like working with family great job guys
@BruceBergman6 ай бұрын
If you have to ask, yes you need a new thermostatic fan clutch. Or a rebuilt if you can find one. 8:42
@lewisgeyer14406 ай бұрын
It's nice to have all of this in one episode instead of dragging it out over multiple videos.
@chrisallen20056 ай бұрын
If the Dawn soap is good enough to clean the ducklings it is good enough to clean up Leg Arms.
@viktortegelberg6 ай бұрын
I've said it before and I'll say it again. I love the welkers because they are doers and not any plug'n'play farmers. Really entertaining to watch 💪🏼💪🏼❤️
@mnbednar80716 ай бұрын
Talented mechanics. Would like to see Scott use a respirator when painting.
@darronlewis31046 ай бұрын
Nick and Scott and Papa Welker have the best personalities. Love those guys
@chappes536 ай бұрын
I love this channel. I watch from Mesa AZ. I know nothing about farming, trucks, repairs etc but you all make it fun to watch. I like how you tackle all sorts of tasks and learn, created new things, special help tools to accomplish your task. Nick, Scott and Dad are the best!!! Keep producing good videos!!!!
@charlesroer9726 ай бұрын
AZ desert dweller , CasaGrande here . Judging by the size of the equipment tractors and implements .i say they are farming not acres but town ships .
@nrs916 ай бұрын
My mum used our 2 post ramp and some old plastic and tin fencing panels to make a spray booth for a small car, with a diesel heater blowing in it worked well!
@williamkelley76546 ай бұрын
If your guys are retiring an old truck then we car readily agree that it was not worth fixing. Thank you for all the hard work posting videos!
@davidduma76156 ай бұрын
I love to watch the brothers work together.
@user-lo7pt4kd8l6 ай бұрын
I well remember when the 3406B came out. I worked for a Cat dealer in the shop at the time and spent over 38 years there.
@rodneywroten29946 ай бұрын
brothers that love each other, once in a life time, Well done boys
@patrickb56566 ай бұрын
One trick I saw with Phillips, is to take a really fine grinding disk or file and cut across 2 dimples all the way to the outer edge. Then use a large as possible flat blade to get it out. It won't strip 'as' easily.
@haydeere16146 ай бұрын
Paint work looks nice
@leolarocque-h4e6 ай бұрын
Love the new Project You guy's make very good Videos .
@grumpygramps78886 ай бұрын
Hey leg arms. I hate to burst you bubble but that tool you made for Phillip's screws has been around for a long time like over 40 years. I called it a nut buster, I don't really know the correct name. I used it on airplanes, alot. I was actually made for airplanes. You can find it at aircraft tool supplies stores and the apex holders to hold the Phillips bits. Another thing I learned in all my years as an aircraft mechanic is to use valve lap compound in the head of Phillips screws that are worn a bit to get extra grip. It works great. I hope you have a blessed day. Keep those tractors rolling.
@AirplaneDoctor_6 ай бұрын
Difference is the aviation ones are made to fit rivet guns, they're using an air hammer, diameter of the shank is different.
@wolfgangkayser14326 ай бұрын
We call them screw knockers.
@bostarbird52826 ай бұрын
I've used the full size one and it should be in the toolbox of every mechanic or shop. Even works great for nuts and bolts, not just screws. Don't remember the name but it works great.
@michaelnelson58166 ай бұрын
We call it a shake n break
@isaiahgoodman28866 ай бұрын
My dad has a 1990 377 Pete with a b model cat in it. If you guys need a vin number for radiator brackets we would be more than happy to give it to you😊
@sallydunbar16836 ай бұрын
When you're done it will be better than a brand new used one! God bless!
@tuberNunya6 ай бұрын
That was cool. Love those CAT engines. Strong pullers.
@PA34566 ай бұрын
God bless all the Welkers
@SteveNicoson-u1i6 ай бұрын
Thanks for another great video Welkers!!! It was interesting and informative and entertaining for sure. First of all your new truck is a very nice looking truck !!!!!! Looks great and has nice features and good tires and just good all the way around. Glad you got your hands on it. Now the process of pulling the old motor (done already) and getting your new used motor in the new used body. Am sure there will be adjustments but to be expected. Hopefully all of that will go just fine and smoothly. Scott a good job of painting the motor. Next time please wear a mask. Just a suggestion is all. Motor looks good painted. Nice work. And you have upgraded the grain trailers also I hear. When all done your new truck and trailer will look great!!!!!!!! Nice work all the way around. Like your new truck. Looking forward to seeing it running and going down the road. Prayers to all of you. Thanks for everything. You all take care and be safe. The Iowa farm boy. Steve. Got to have a name for the new truck. How about ; Go Get Em!!! Or Farm Trucker!!!
@grandpajim3296 ай бұрын
👌🏻👌🏻👍🏻👍🏻 NICE WORK GUYS!!!!! ALWAYS ENJOY YOUR UPGRADES, THIS ONE IS A "NO BRAINER" THANKS FOR YOUR TIME!!! 😍😍😍😍😍🙏🏻🙏🏻
@mrfordfairmont6 ай бұрын
the Phillips screws that i have issue with i cut a flat blade slot in them! with the park brake on it can not get away......
@avrtt6 ай бұрын
That C12 is a worthy engine to rebuild. During my driving career I drove many trucks with the C12. It is quite stout when set at 430HP, it can be run up to 445HP. The engine was great when used in weight sensitive applications.
@jarrodwemhoff72706 ай бұрын
Weight sensitivity and farm trucks are two phrases that are never used in the same sentence.😂 load the wagon forget the mule.😂
@guydaubenspeck92066 ай бұрын
@@jarrodwemhoff7270Jared wamhoff I'm still in that line load the wagon forget the mule I like that
@matthewheilman45726 ай бұрын
I salt the roads now.. the shop mechanic loves his life every day. It's not just rust but electrical issues too
@larrydavidson34026 ай бұрын
That is going to make a nice truck and at a decent price. Best part is it will get the job done just fine.
@youtubeisawesome24876 ай бұрын
check your rear valve cover, they dont like chains, get a 379 radiator support for the engine, one mount per side of the engine with a flat plate over the valve cover with the taper bushings on each front side, total pain, hated petes when you have to remove them, also check your transmission shift top cover, the set back may force you to get a new top. there are three different tops, rear, middle, and front.
@blainetoalston59456 ай бұрын
That’s a handy tool you made for the Phillips screw! Awesome
@davidhudman71446 ай бұрын
I like seeing the mud on the tires and yard.
@KyleKinard-j8e6 ай бұрын
Thank you all for making me smile. Great personalities.
@henryg6836 ай бұрын
Can’t wait to see that blue beauty hauling its first load off the farm or onto the farm whatever comes first!!!
@Blacksheep19686 ай бұрын
It's good to see you guys working on a truck build again. I found your channel during the IH build and have been watching since. Learned a lot about things I have never been exposed to.
@WelkerFarms6 ай бұрын
Thanks for following along!
@timwasserman10636 ай бұрын
Respirator for painting Scott!!!!
@brucehobbs17346 ай бұрын
I used to love the 378 with the set back axle. Other drivers would hit everything because they didn’t remember the set back axle. Great in tight places.
@greasycervelo6 ай бұрын
We used that Phillips air tool in aviation maintenance . We called them a woodpecker
@levihillsman78436 ай бұрын
That 90 pete (red one)with the swept back axel hood. They are not easy to find anymore. Your sitting on a chunk of change if someone needs one
@karljacobson15756 ай бұрын
That will make a nice rig! Those 379s are getting so high it’s hard to justify for a farm truck. I have a 01 379 I bought 10 yrs. Ago. Should have bought 3 !!!
@2020Tundra6 ай бұрын
You guys are amazing mechanics!! You tackle some very challenging projects that many of us wouldn’t attempt to tackle ourselves. 👍👍
@willcE2MC2E2X16 ай бұрын
You know Scott. I gotta say that I really admire the relationship you have with your brother. If my brother and I took off on a project like that, in the first five minutes one of us would be going upstate 10 to life. Keep it up and be safe fellas....love,peace, and diesel grease!!! E = MC2= EVERYTHING MUST CONCLUDE SQUARED= MC=E2=solidarity2.
@michaelsurratt95936 ай бұрын
I read a comment recently from a know it all, basically if you have to make a tool, you don’t own the right tool. Which is stupid. What about necessity is the mother of invention? There are constantly the need for a new tool. You can also improve on existing ones. Keep up the good work.
@joebgriffin43456 ай бұрын
We used a similar device on Jet aircraft to get Torx and phillips screws out.
@taurus42056 ай бұрын
I’m all for electric vehicles for folks in metro areas commuting. But the ability for farmers-or whoever drive semis daily-to swap and repair old stuff is what makes diesel’s relevant still. Edison motors hybrid truck is pretty cool. Also the option to use vegetable oil-yes, it works, better in warm climates, however very labor intensive in gathering fuel-is still an option.
@williamdowns19176 ай бұрын
As you found out, the 3406 is a larger motor than the C12. Pay attention to what your driveline angles will want to be when you want to reposition the rear mounts. Also, this truck is a set-back front axle and you have the oil pan position that's normally used on a set forward axle. You might need to flip the pan to provide clearance to the axle and tie rod....But you've probably already figured that out if it is a problem.
@jakeford76886 ай бұрын
When I switched my B for and E the donor motor came out of an FLD had turn the pan around and get a new sump. I don't envy have to go from a e to b that whole truck is electronic
@johngoldsmith66296 ай бұрын
Better hope the EPA don't catch them. What they are doing is illegal.
@bertsweere49796 ай бұрын
How do you switch from electric throttle to a regular, be there room for a rod?
@Pipedreamsdiesel6 ай бұрын
A 10’ easy up with plastic wrapped around it works great for small painting projects Great work
@ronsatzler57716 ай бұрын
As I recall working at Cat, when the engine number got up graded to a new series and adding significant horsepower, some of the internal parts got an upgrade-----such as pistons, rings, bearings, etc. Beware of how much power you are adding without needing internal upgrades.
@williamcrowder14406 ай бұрын
I recommend that you remove frame horns and hood from 379 and move them to the 377. Rough use will cause the hoods to crack vertically up beside inside of headlights on 377.
@raymondscott85846 ай бұрын
Amazing how many projects you had last winter. Scot’s rig the Big Bud and this truck. Thanks for bringing us along. Keep on farming and I’ll keep on watching.
@jerryfaulkner65186 ай бұрын
Why was I thinking the pan needed a front sump on that set back front axle? is there plenty of clearance?
@SomedayTooPulling6 ай бұрын
Call that a screw knocker in Aviation, adapted something similar and use a rivet gun. Works like a champ.
@ProblemChild-xk7ix6 ай бұрын
Beautiful blue color on the new truck. She is a winner. Congratulations.
@bigfoot-wo3qy6 ай бұрын
We have a 99 377 that we’ve had since 350k miles. Now has well over 1m. M11 Cummins and super 10 3.77 gears. Recently did a major and a bunch of other odds and ends. Ready to roll again.
@morgansword6 ай бұрын
A solid hard five day job working full time to do everything done in just minutes. Glad its you as my day came and now way way gone by. I had armstrong and a couple air tools. No big tools that were powered by a battery or even air. As said, if going to sema and being a trailer queen... might of done different but its a work truck with TWO chrome stacks! More to maintain but driver pride does help as its the new kid on the block. DOT seems to avoid stopping rigs that are nice looking, even with broken frames and fifth wheels falling off. I have drove old mack trucks (yes break your back comes to mind) that would be there every day working their guts out, underpowered and blowing smoke but made good money every day. You could start it in the coldest days and still have some heat in the cab around most of the airholes in the frame and body throwing dirt in your face. If put on the highway, might of made it a half mile before going to the hoose gow for a good year! Nice work gentlemen. Hard to make it entertaining when its a no fun job.
@BRENTTULLY-uk5trАй бұрын
Hi 👋 Bob Welker and Nike Welker and Scott Welker.
@patrickaherne35986 ай бұрын
I like to use an electric soldering iron pressed against the head of a stuck fastener for a minute or two to apply heat to the fastener and allow it to rotate, but I've only used it on small fasteners. It just puts heat where you need it and isn't as good as those induction heaters, but everyone usually has a soldering iron.
@chrisanderson68376 ай бұрын
I’ve done that pulled my 425 b model and ll8sp and put it in where 12.7 Detroit was. Greatest thing I’ve ever done. Only thing I had trouble getting the way I liked it was fuel peddle angle. Had to trim frame rails as the front cover was wider on the cat. Such a good idea.
@dougp18566 ай бұрын
When I worked in a truck dealership and we would repower like you are, we would remove trans and just motor mounts installed new new location so we wouldn't have to work around the trans. Gave us more clearance and visibility at rear of the engine to get frame mounts where we wanted them. I enjoy watching your videos.
@waynerobinson49786 ай бұрын
Looks like a tidy little truck 🚚 Onwards and upwards lads Keep the faith Scott hates painting but loves 😍making tents ⛺️ 🤪!!
@CGW116A6 ай бұрын
Next truck must be red. Believe the Welkers can find a donor steel frame. Lots of work but the Welkers sure are capable!
@verdagarner51126 ай бұрын
I have learned if I ever need an engine changed I am calling the Welker men. Great video guys love watching you work on your equipment
@Scoob450r6 ай бұрын
I worked at Peterbilt motors from 2003 to 2007, I worked in the engine set department during part of that time. Those harnesses were always in the way. We had to twist the engine to work around the lines, also we didn't have the cab or the fuel tanks in the way at that point.
@Tigerfan506 ай бұрын
Sweet looking rig!! Good luck with the restoration.
@brianpeschke6 ай бұрын
I'm old enough that I worked on those, a problem I just remembered was the oil cooler leaking. You might want to put a reman. in it. Those were common problems back in the day.
@dirtydave43516 ай бұрын
If I did this engine swap with my brother, we would have tried to kill each other at least 3 times.😂 You guys work together so well!
@harrytackett16456 ай бұрын
$6000.00 Sweet truck deal + plus newly rebuilt big dog engine = New Truck!!!!!!
@mikebougher37316 ай бұрын
If you could put the tanks under the cab you can put the lift axle on that truck without stretching the frame.
@chiphalvorsen42526 ай бұрын
Why does it sound like poetry, whenever you say "Just got this from Tony Fast at Fast AG" He is the gift that keeps on giving!!! Just remembering the Case Skid loader!
@nightstorm91286 ай бұрын
That's a clean rig for 6 grand,,you got a good deal,,,should be sweet with that 3406 backed by 18 speed,,,best of luck ,,
@charlesroer9726 ай бұрын
Plenty of holes for mounts and brackets so a 3406 will fit perfectly
@kevinsiedschlag4296 ай бұрын
When fighting rusted screws in floor etc, I've found a small sandblaster, with very fine sand, blast the bottom of screws, usually come right out!!
@tylerm40256 ай бұрын
That’s a great buy for that truck. Can’t wait to see it get finished. Great work Welkers!!!
@anneoreilly49006 ай бұрын
Another great Legarms tool. Thanks for sharing.
@renegenereux64756 ай бұрын
Great job you three are doing with that new Pete and new Cat. Looking good already.
@hedleyjackson51316 ай бұрын
Great tip on the Philips head thanks
@nagydeak2 ай бұрын
the bean bag!!! yes, you should def add one to your paint booth!! :)
@nickmorrison81826 ай бұрын
Straight pipes would look good on that new truck!
@WelkerFarms6 ай бұрын
😉
@craigsmith82176 ай бұрын
The primer protects the metal. The topcoat protects the primer.
@andyrecalde4946 ай бұрын
That’s a model 378SB, set back axle
@mikebarbacovi98516 ай бұрын
Love that 377 !!! It’s in exceptional shape.
@henrygin32966 ай бұрын
That's a good tool I will build one to used on my demolition hammer with a speed controller on the motor to remove rusty bolts might have to put a nut in the sockit to transfer shock to bolt
@Imroytc6 ай бұрын
Not sure if it will help you but when I have pulled an engine and transmission. I have used a come-a-long to the rear on the transmission and a chain on the front. As you are lifting them out you can raise or lower the transmission.
@Rumblestrip6 ай бұрын
GASP! You scratched it Nick! Scotttttttt!!! Nick scratched your paint job! Lol
@Almightyrastus6 ай бұрын
Nice, liking the mirrors out on the front like that. I am a big fan of true wing mirrors, you get a great field of view with minimal head movement. My old '61 Land Rover had them.
@Varrig6 ай бұрын
A truly enjoyable series! That truck looks very nice. No doing doughnuts in it Nick! Take care and God bless!
@gilleslepeytre74496 ай бұрын
Bonjour Nick et ton frere super le nouveau chantier en mecanique bon courage pour la restauration du nouveau camion
@thepeoplespal56 ай бұрын
Love the yellow paint job on the engine, good luck with the truck it looks really good. The previous owner will be wanting it back. It is great to be handy on the tools.
@ImpHalla666 ай бұрын
At the Boeing Company, the phillips head removal tool is called a Lester Tool.
@garyflint17936 ай бұрын
Scottie, you might want to think about wearing a respirator when spraying paint so it doesn’t coat your nasal cavity and your lungs! But I know this the last time for spray painting!
@dan93236 ай бұрын
Your truck videos are the best. Reminds me of twin stick garage. Thanks guys.
@MrRiverman816 ай бұрын
And it has this nice blue Welker Farms paintshop fits great with the Welkers Farm Logo 🥰
@WillFigs8236 ай бұрын
That tool you made for the air hammer is an actual attachment for it that you can buy. I've seen it in the past, but cant remember who I've seen it made by.
@kenmorford61566 ай бұрын
We have the same setup for frozen screws, been using it for years on aircraft so it was a good idea no doubt, though we use a rivet gun not a air hammer, rivet gun hits harder and slower but either will work
@jamesvantuyl52906 ай бұрын
Two questions Would the back engine mounts from the C12 fit the 3406 and fit right where the frame mounts were? 2nd. How close is the oil pan to the axle.....might have to get a front sump model oil pan. I think the C12 was set up that way. The difference is that the first Pete was a set forward axle, the second on a setback axle. Just my two cents
@MrSilverado19826 ай бұрын
Nice score on the newer Pete , looks like it will be a very clean truck compared to the old one. But my favorite is the International!
@zackconstruction37276 ай бұрын
I had a cat 3406 6nz that got oil in the coolent. I replaced the oil cooler, and that fixed the problem.
@johnlease55516 ай бұрын
i would just replace the head on that C-12. That is a good engine if taken care of. I drove one set at 430 HP with 1450 Ft Lbs of torque for over 671,000 miles and never had any problems with it hauling freight from coast to coast. One thing you dont want do with what engine is to run it hot and have the head bolts torque checked every 100.000 miles. I loved my C-12 and called it, " My itty bitty Kitty with an attitude", because it sure had one.