Bowling Ball Vs Woodturning Lathe = Forbidden Fruit Bowl

I was inspired by Carl Jacobson to try this Bowling Ball project. to see how it would turn on a lathe and what I could make from it. Hope you all enjoy this one. Happy Days !
🎱 My Woodturning Pool Balls Project
• Woodturning - I put th...
🔨 Charlie The Maker (My Son's Channel)
goo.gl/kSViJv
🎳 Carls Bowling Ball Project
• Woodturning | Turning ...
😉 My Vlogging Channel
/ @zammetislife3816
🤔 Patreon ( Please consider supporting my channel)
/ nickzammeti
🌎 Nick Zammeti/ Instagram
/ nickzammeti
🔨⚒ My Kit I use in my videos
kit.com/nickza...
🎧 The Music I use in my video's
share.epidemics...
🎼 Tracks in this video are as follows: -
👉 First Song - Feline by Kadant
👉 Second Song - No Cry by Fasion
👉 Third Track Dulzura by Lu-Ni
👉 Forth track Don’t Fight It baby by Bang Bang
🌎 Nick Zammeti Personal Instagram
/ zammeti
🌎 My Website
www.nickzammeti...
💦 The Epoxy Art Resin I Use
👉 bit.ly/38Ea7p4
🌎 Come follow me on Twitter
/ nickzammeti
🌎 Check out my Facebook Page
/ nickzammeti
…………………………………………………………………………………………………………………
SEND ME STUFF
NICK ZAMMETI
PO Box 363
ROMSEY
SO51 1DY
UNITED KINGDOM
………………………………………………………………………………………………………………………
PLEASE NOTE: IF YOU ARE SENDING ME SOMETHING, PLEASE COULD YOU MARK A LOW VALUE ON THE PACKAGE YOU ARE SENDING. THANK YOU.
………………………………………………………………………………………………………………………
🙊🙈🙉 NICK ZAMMETI DISCLAIMER
Please note that my channel is for entertainment purposes only. You should NOT rely solely upon the information and techniques discussed and displayed in my channel.
I'm not a professional woodworker or woodturner and working with machinery can be dangerous.
It is recommended that you fully research each technique and decide for yourself what the safest possible work method is for you.

[@DragonTamer00]

You should take those shavings and put them into resin. Make an Ironic Bowling Pin out of them.

[@meltonbates1945]

Mm I else Tomeeud

[@johnwiesbauer6184]

Kiyochii Hosokaowa striking idea!!,

[@johnwiesbauer6184]

“ striking” idea

[@janejamison6056]

Love this idea!

[@KittyLovesGlover]

YESSSS!

[@ThisOldPanda]

Is it just me or should he have cut in the finger holes for the lid?

[@JohnSimpson36]

Or cast a small ten pin in resin

[@BushiM37]

Good idea.

[@brandysigmon9066]

@@JohnSimpson36 Yeah or he could turn a small pin on the lathe. A bowling nut would love that.

[@thekettle3534]

I agree, I had flashbacks to when I was a furry when I saw that

[@rebelredRC]

Or used a tiny bowling ball on top of a pin

[@retropockystick]

I can't be the only one who comments this but... JAWBREAKERS. Nick, you gotta find the biggest jawbreaker and turn it. Maybe coat it in resin to keep it from splintering? Or maybe toss a bunch of smaller jawbreakers in resin!

[@Pocketnemo]

A giant jawbreaker pot to hold smaller jawbreakers.

[@nealhudson3615]

Hahaha I was just going to comment anyone else thinking jawbreaker when he cut it open 😁

[@christopherpappas7474]

OML Yes! That would be sooo cool to see:) ☮🐱

[@beckystrobaugh1130]

A big pink jawbreaker!

[@joyenglish1275]

Yes please!

[@somebody3074]

Missed opportunity to call it “The Bowling Bowl”

[@LovingJo]

Exactly what I was about to write!! ❤️

[@myoman1977]

He called it that towards the end

[@neynay8730]

22:23 he says bowling bowl pot...

[@helema23]

i just wrote that before scrolling the comments

[@goldbunny1973]

Anyone else thinking "Make a bowling pin finial!" ?? or is that too obvious.... Love this project. I only watch to see you making an unholy mess.

[@wayneoconnell5531]

I was thinking the same! Not too keen on the final finial 🙄

[@goldbunny1973]

The Final Finial. Good name for a band. : )

[@bencoleman1893]

That was my first thought as well!

[@Jen_S_Hassler1258]

YES!!!! Sorry, Nick, but I was actually starting to yell at you for not making a pin final. The final one kinda makes it look less like a bowling ball and more like a funky apple statue. Love the mess, and very interested to see what you recycle the shavings into...

[@mickeyb2219]

You're not the only one lol.

[@sturdygirl7772]

So bowling balls are made from silly string?! Who knew?! 🤪😁 enjoy all the cool, funky stuff you make!

[@dustysparks]

No silly, all silly string is made from bowling balls... pffft duh! /s

[@Roy666Batty]

Bowling balls are weighted to one side so that "anomaly" is actually a design feature

[@DragonGateDesign]

This is true mostly, The white bit is part of the "core" which has a wide range of shapes, locations and materials all depends on how expensive the ball is and how and by whom it will be used

[@crimsonghostohio]

Even the cheap balls need a counterweight to keep them from sliding.

[@jt450rcrf]

The white dots on the surface also gives a reference as to where the drill the finger holes depending on how much you want the ball to curve or hook.

[@kimberlyfillers992]

Shaun Kennedy all bowling balls are evenly weighted until you drill the ball. That’s what a weight hole is for.

[@murphragous]

Kimmie Fillers Not true. All balls are different and not weighted evenly. Different shaped and weighted cores depending on how aggressive the bowler likes the ball to hook.

[@bleachchugtidy2178]

This would've made a really nice urn for a bowling fan

[@MrJoesephwhetsel]

You missed an opportunity to make the top a bowling pin shape

[@MissThavel_DaBestTeacher]

Awwweeeeeee! Good idea

[@rashaelwilkerson]

Aw I cant believe he didn’t think of that. 😕

[@nickzammeti]

Joeseph Whetsel dam yes 😳

[@MrJoesephwhetsel]

@@nickzammeti glad to see a reply thanks for the fun videos and funky stuff you do... I still liked the pot the way you did it... keep up the good work... I inspire to be as creative as you along as teaching my kids ways to create like you do

[@hughmungus3158]

That's what I was thinking a little pin lid handle

[@wisprin9674]

The handle is ever so slightly phallic and I can't not see it. Otherwise amazing bowl

[@antopac4067]

That handle will make some lady friend very happy

[@adm3528]

Too pointy

[@Fashionetta1]

A nice vampire stake.

[@bridgettmcelwain6264]

I swear everytime he makes one it starts out extremely phallic and I always find myself laughing 😂

[@raddest.radish]

Almost reminds me of the mouthpiece of a clarinet

[@AstarOfDavid]

I always though the center of bowling balls were filled with concrete. But doing some research resulted in this: "In general, the inner core is made of powdered metal oxides such as calcium or iron oxide mixed with a resin and catalyst to harden the mixture. This is the heaviest part of the ball, and its shape-whether symmetric like a sphere or asymmetric like a lightbulb-influences how the ball rotates down the lane." *Oh and HUGE thanks for the newly added music/track list!*

[@AstarOfDavid]

@the marble racer How was your use of the word "read" meant to be read? Because your statement can be read two ways. Did you mean the word "read" to sound like it is used in this sentence: "He planned to read the book..." OR did you mean it to be read as "He read the book"

[@Robstalobsta82]

8:58 I am pretty sure this is a material with a higher or lower density so that the ball is off balance. This helps bowlers to get good spin on the ball and get good curves into the strike zone. :)

[@ghalv8531]

Yup. It's a weight to help with spin and curving the ball.

[@andrewrexroth577]

It's called a weight block

[@nervousbabbs2769]

lol came here to say this.

[@lee-annchristianson6258]

That's neat! Thanks for the info.

[@CarlJacobson]

That turned out awesome! Thanks for the shout out brother!

[@nickzammeti]

Carl Jacobson hey thanks for the inspiration on this one buddy 👍🏽🎺🎺

[@jasiahmarvin23]

i dont mean to be so off topic but does anyone know a method to get back into an Instagram account?? I was stupid lost my password. I would appreciate any tricks you can give me!

[@ezekielrandy6169]

@Jasiah Marvin Instablaster =)

[@jasiahmarvin23]

@Ezekiel Randy i really appreciate your reply. I found the site through google and I'm in the hacking process atm. I see it takes quite some time so I will reply here later with my results.

[@jasiahmarvin23]

@Ezekiel Randy it did the trick and I finally got access to my account again. I'm so happy! Thank you so much you saved my account!

[@LovePhoenix96]

Omg I watched one of your older videos from like 2 years ago and wow you were so shy but now you are so funny and one of my favourite channels to watch! 💕💕💕

[@RedeyePerc]

The outside cover is resin. The pink core is urethane. That grey bit inside is the weight block, and they are usually some type of denser ceramic. That’s what helps the ball hook. It’s centered on that white dot on the outside, so if you would have turned with that at the very bottom it would have been symmetrical inside. Cheaper balls like this have a smaller weight block, but if you would have had a more expensive one that ceramic could have been ultra hard and a weird shape. Cool project!

[@tami_withan_i]

This is pretty cool. But I would have made the finial look like a bowling pin!

[@joyenglish1275]

I think it would have looked nice with some walnut in between the lid and the pot. It also would have worked to replace the material lost in the chip out.

[@hedgerow.homestead]

Felicity Forbes I was thinking the same thing. Add a bit of wood to make the lid bigger

[@RIDGERUNNER3174]

My thought exactly

[@mrdewilliams]

Wholeheartedly agree. Would make for a nice follow-up video too.

[@goldbunny1973]

..and maybe put some resin filler in the hole Nick got in his hand as blowout happened. That could've been a nasty injury but we're thinking about the pot rather than if his hand is sore, aww. A similar thing happened LIVE to "WorthEffort" who recoiled in pain when a splinter broke the skin. A reminder to always wear protective eyewear etc.

[@garywiant1595]

I was waiting for a wooden ring as well. Great work & energy as always.

[@Haffina]

As someone who used to bowl I find it really satisfying to see bowling balls being made into other things.

[@kandipiatkowski8589]

*sees the signature "hiding the Yorkshire Grit" bit after a long while* It's about time! I agree with someone else, a mini bowling pin finial would have been epic!

[@nickzammeti]

Kandi Piatkowski 😂😂🎺🎺🎺

[@mephustowest1876]

could you make a lamp with pine cones and resin? I think something like that could look pretty funky.

[@kittenneedles9590]

Funky funky! Could you please try mixing yarn in resin to make a bowl or pot? I think using different colours and it would make all sorts of different lines it could look really interesting.

[@daroldw4606]

I made one and it looks pretty cool!

[@jadayoung329]

Thid is a good. Idea.

[@melissalundberg1984]

Peter brown did something like that with yarn and resin, it was pretty cool :)

[@samanthastokes3897]

I know you're probably not gonna see this, Nick, but your energy and your woodworking has really been a shining light in the darkness of my life lately. You never fail to make me smile and make my day a bit more bearable with your shenanigans. And I wanted to say thank you. For always being so bright and cheery and loud and all around amazing.

Same for me! His videos always put me in a better mood!

[@TheDellaniOakes]

Me too! I saw another video where he said someone asked why he can't be "normal". Why should he be? That's boring! It's the antics and silliness that make his videos so appealing. I start my day with my coffee and a Nick Zammeti project. Then I have a smile on my face all day. :)

[@sleepie79able]

You definitely need to watch “how it’s made” bowling balls!! Beautiful finish though, love the videos. Keep up the amazing work!!

[@ladypoetess]

I was about to say this, too! It explains what all the parts are and why they're there.

[@ShintogaDeathAngel]

I was thinking that, as well! Used to binge watch that show lol

[@RavenAttwoode]

That was filmed in my town! Which did not have a suitable bowling alley at the time, strange but true. They had to travel a few towns away to run play tests. The alley has changed hands now and has been refurbished. Not sure if Ebonite has started to use it though.

[@HappilyHomicidalHooligan]

10:50 if you really want to give the inside a nice shine, finish hollowing it out and then give it a smooth, thin coating of resin and sand/buff the resin to a nice glossy shine... A resin coating will also keep the core from contaminating (or being stained by) whatever is stored in the pot.

[@potatoqueencalamity]

Save the shavings for a future video. I think they would look cool in a glow in the dark pot or something

[@VondaInWonderland]

Happy days!!! Why do I still get so excited when you sneak out the Yorkshire Grit in funky ways 😂 Your videos just keep getting better and better, and your new place is fabulous. You Nick are a very blessed man♥

[@nickzammeti]

VonDa in Wonderland hahahah thank you xx

[@cpt.racksparrows]

Watch How Its Made. It's a show and it will show you how bowling balls are made. If I remember correctly it has weighted stuff on the inside and also some.of the filler absorb the energy so it doesnt break when its tossed down

[@megtrip3]

Bowling balls are weighted differently depending on its final job. A "lane ball" or "house ball" will probably be used by less experienced people, so they will generally roll pretty straight. A pro's ball, though, may be weighted to have a major curve to it.

[@irenel1119]

Yeah I was rather horrified in the beginning with him not knowing if it was uniform throughout, let alone the asymmetries. Scary to just slap something on a lathe. And I do know machining and woodworking.

[@jodiebare629]

Okay I think this is a beautiful pot and great idea, but who else thinks that handle ruins the look? 🙋‍♀️🙋‍♂️🙋‍♀️ I personally would have chosen a short sphere type handle or something like that, but that's might just be me.

[@bigstackD]

Damn Nick perfect timing I just cracked my first beer and this popped up in my phone👍🏻 Cheers mate🍻🍻🍻🍻🍻🍻🍻

[@charlesdunkelberger8548]

I love it that great DIY'ers like you guys watch each others posts. Great videos from both. Thank you for taking your time out to inspire the little guys.

[@bigstackD]

Charles Dunkelberger Well it’s good you watch us both then my friend😁👍🏻

[@shootthemoon6072]

@@bigstackD You made the key to One Eyed Willy's treasure? Sweet!

[@ArthurB2023]

i dont understand why most of his bowls are always so shallow in depth.......im mean (at least visualy) it looks as if he could go at least another inch deeper

[@grendelshooter4556]

I agree , he could have hollowed it out until he cut back into the resin again, I saw a guy do it here on KZbin and his was really deep and when he polished it up you could almost see through it, it was awesome

[@spicybeantofu]

This one seems very shallow compared to others Ive seen of his. Maybe the concrete type stuff was hard to work with?

[@JamesBond-oc4gm]

that's what she said

[@skeeterpeter5337]

should've made the handle a bowling pin.

[@crystalsharp6685]

The scraps from the bowling ball should Definitely go into something cool!

[@marcihaught1840]

I hope you saved the shavings from this. It would make a great blank.

[@alisesedlina-brudere6908]

You have never tried to combine some kind of fabric with your projects(lace or some fluffy material could look cool with wood

[@DaughterofAmanirenas]

Oooh that would be nice!

[@Destros2ndone]

it's actually quite funny to see you get covered in spagetti over and over again XD but it's a sign for a good and sharp tool ;)

[@sauceboss6993]

Showed your videos to a few of the troops over here in the states and they where going bonkers, they couldn't stop laughing. Love what your doing brother, keep up the good work. Cheers!

[@toddcolvin1273]

The white “anomaly” you found when you parted the lid is actually the weight that is inside the ball to make it curve when you throw it. FYI

[@XZasCC]

Nick, do you need a camera man? I notice the majority of your shots are either done by yourself or tripod, just wondering if you'd be interested in having a cameraman, I'm in the UK, message me if interested :) I'd love to work with and watch you work first hand

[@harleydaker2299]

Here's a challenge for you make a pot out of a golf ball

[@that1emo280]

I really hope you see this comment. I really think you could make something cool with all those shavings and resin. Keep up the good work 🖤

[@Rouverius]

I was gonna make a clever Bog Lebowski reference but I'm completely out of my element.

[@austinsotomayor2753]

This is my first ti.e watching him and I feel like he needs more support for what hes doing hes hilarious

[@johnthayer4496]

You did great, I tried my first bowling ball , went a millimeter or 2 to deep and watched it fly across the shop and become a fragmentation grenade!!! Can you post the Etsy seller name for your emblems, I could not find it, of course I Americanized the spelling!! Keep it up I continually try your demos and welcome mor

[@MissCathexis]

Man, though....if you’d collaborated with Dukey (Bobby Duke Arts), he could’ve made you one of those crazy carved flames for the finial as it looks a lot like an oil lamp.

[@jeannettekatt431]

Am I the ONLY one that sees a GIANT CHERRY after the finial got put on. Lol love it!

[@oj_ob]

jeannette katt I was thinking apples!

[@jeannettekatt431]

@@oj_ob I was thinking apples until the end. An apple stem has the bulb at the top of the stem where its at the bottom on a cherry. Lol I know I know. I over thought it lol

[@katiesmiles7649]

Very funky I love how when you first take the lid off it kind of looks like a jawbreaker candy

[@ashleyblackburn1311]

I love this! Ya know, it makes me think of the poisoned apple from Snow White! So cool! Well done, Nick!

[@dapanda1597]

I saw this and instantly thought... That's a pumpkin.... So here's an idea, whenever Halloween rolls around, make a similar one with orange and black and cut out the little crease doodads. I think that a pumpkin bowling ball would look really cool!!

[@jeffharmon7927]

Awesome job Nick kinda looks like a psychedelic apple. to everyone please watch entire video it also helps the creators 👍👍

[@tylerdalfol3484]

Small bowling ball lesson for ya. All bowling balls have a core or weight block on the inside. The coverstock is typically made out of a resin or urethane material. That grey part in the middle is the core or the weight block. Judging by the markings on your ball, you have a symmetrical weight block. The science behind bowling balls are kind of awesome really

[@ShmoogleOsukami]

Is this how they make the string that is in party poppers?

[@billbillinger2117]

Exactly how.

[@aksnowberry]

bowling Balls are made by blending various resins with urethane. Cores are made by adding a heavy substance such as bismuth graphite or barium either to resin, making a very dense type of plastic, or to a ceramic material. The dot on the bowling ball is the pin its how a bowler can get their desired control of the ball down the lanes into the pins

[@balloon_lifted]

I was always wondering if you can woodturn a book. Should be possible somehow, right?

[@melbellrocks]

That finial looks like it's destined to be Exhibit A in a murder trial! 😦

[@sharonnsmith81]

🤣🤣💯

[@bazzatron9482]

My word, that is a fantastically oversized finneal! I think the small resin chunk would have come out better - I find that resin like that tends to be a bit too brittle to carve out with carbide, much better to use the skew. The ball came out looking great - but I think you definitely need to work on getting things thinner! the last couple of things you've turned on this size have been well over an inch thick at the walls. You're a fantastically talented turner, and I'm sure you could get much finer work if you kept at it a bit more. also, you and I both know - gloves on the lathe?? Looking forward to seeing the next wacky thing you put your seal in. You always give me some really good inspiration. Keep up the good work!

[@PB8man]

Those shavings could make for a funky project

[@spiderobert]

Does "itty bitty" mean something else in the UK? because there is nothing small about that finial

[@victoriakratz6946]

You should put like shavings in export like the colorful ones off of this and see if that colors it or not P.S. not sure if someone already said this or not but it would be cool to see

[@gabbyholloman9398]

All I can see when I look at the final product is a candy apple. 😂

[@hesusdanu9231]

you can make also a halloween pumpin from it, almost same shape

[@kellyispanda]

Im so glad you chose to not use the pink one. I was like 'eeeehhhh no Nick, not this one'. And when you decided to use something else, I was like 'YES, THIS IS WHAT THIS POT NEEDED.' Absolutely beautiful piece.🖤

[@institches1953]

Nick I'm not judging but...well the finial looks a bit like a wooden red rocket...

[@JamesBond-oc4gm]

lmmfao true

[@dameashelyattic5247]

Most of his finials do.

[@joleenreitz2249]

Looks amazing. But your blowout bit, scared me back to high school wood shop. Making my grandma a tall wooden vase, everything going great until I went to hollow it out. Needless to say I hit a knot, didnt break apart at first, instead my finger rolled up ontop the guard then as the knot and tool connected a 2nd time, shattered the pieces and all but took off my finger. Ouch. ... All that said. I've very much enjoyed your channel,.so no cutting off your fingers . Keep up the waffling!

[@Alles_komisch_hier]

... And again, many greetings and best wishes from Germany 😊

[@sams3346]

Servus

[@Alles_komisch_hier]

@@sams3346 servus 😅

[@jasonwerner5897]

This was real cool until you put that stick on it. Sorry

[@andygames4140]

So I'm getting a "beginners" lathe at the end of the month for my 40th!! Literally can't wait now 👌🏻😍 keep up the fantastic work 🤙🏻

[@stoneygirl77]

Far out! Such a cool idea! This came out beautiful! Aladdins bowl is what I call it. 💖💖💖💖💖💖💖

[@Waterflame]

The grey stuff is the core of the bowling ball. It's what gives it the weight that it needs to be rolled properly. It looks like this was an asymmetrical cored ball. Oh, and the white spot on the ball is the mass bias indicator.

[@scottbecker3563]

There are video's on how bowling balls are made... If you look up the make & model of the ball you will know how that ball was made... There's a TV show called "How It's Made" They did an episode on bowling balls...

[@mojidoesthings4072]

1 view 52 likes 13 comments KZbin, go home

[@ManOf1ThousandHats]

The white is part of the weight. Bowling balls are made of three major parts. A weight, the body and a decorative shell. The shell is made of polycarbonate plastic or urethane resin. The weight is an irregular shape so drilling it (or mounting it in a lathe) different ways effects the balance. There is a way to know how the weight is positioned to allow you to make it neutrally balanced but i would have to ask my uncle, he drills bowling balls.

[@vladbigovic7432]

Can you please put a link to that Etsy page as when I tried to search for it I couldn't find it thank you in advance

[@Sammo-w2y]

That would be handy. Couldn't find it either

[@nickzammeti]

Vlad Bigovic search von Hanke branding iron but I will

[@vladbigovic7432]

@@nickzammeti yeah I tried that and it wouldn't find him. I'll try again now 🤘

[@vladbigovic7432]

Found him❤🤘🤘

[@Sammo-w2y]

Etsy seems to have a selective search engine. Finally his shop came up in a list. Really weird I have looked at my spellings and for the last 4 searches spelt the name correctly... strange. Anyway finally found his etsy shop 😁

[@roshif-tv9xd]

I was hoping for some bowling pin (regular or maybe duck pond type) type for the bowl-ing bowl lid handle. Still awesome!

[@purpletears5428]

Omg love ur videos! Ur so creative.keep up the good work👍🏼

[@kleinesflaemmchen]

Please don't hate me, but I think this would make a great flower pot, especially for cat owners because it's pretty heavy compared to normal ones ^^' Also the colors would work well with some fresh green and similar colored blossoms :D

[@DeadriseWoodCrafts]

I have some bowling alley lane wood I can send you Nick. You could turn a bowling pin 🎳 for the top.

[@Jagermeiister]

I think if you were to use those shavings in some kind of resin project, that it would look amazing!

[@SixRavenEight]

What a fantastic project! I think the pot turned out quite lovely, I love the colours. And I am really happy you didn't make a bowling pin handle for the pot top. This way anyone would be happy to have it in their home instead of it being niche. Thanks for the video, Nick. ♥

[@boydmerriman]

Why didn't you just leave the original bowling ball exterior ? You could have left the logo on it. All you did to the outside of the bowl was to shrink it a bit and lost the sheen that came with it. Otherwise, great bowl...ing....bowl.

[@MaryHyso]

Yes! Super cool.

[@DembaiVT]

...he doesn't know that a bowling ball has a core... it's going to pop, right? ...yep.

[@five9guy69]

I like the way it turned out; however, I was thinking perhaps something like a bowling pin shaped finial it would have gone with the bowling ball. Just an idea.

[@lainieinjax1]

I love your humor!

[@surryan]

Oh Nick, if you had just watched a bit of "How its made", you would not have been the least bit surprised about the interior of that little ball.

[@VishakhaSentuktuk]

i am deeply inspired sir. you are re using wood and saving environment and making good use of things we throw daily is something that needs courage. Your craft is gifted coz you practice and work on it each day. Thanks sir for motivating artists today and forever!

[@RyanEthanDunn]

Love this piece and the colors. Definitely would buy a hundred times.

[@MissCathexis]

Awww... I missed you finding that wandering Yorkshire Grit!

[@1991LMR]

I love the bowl, not the finule though. But awesome job as always Nick!

[@tanyawinters3979]

These videos are so relaxing. After a long day I watch a few an all the annoying parts of my day melt away. It’s also really cool what gets made.

[@reforgedcriterion1471]

Now I know where you keep your yorkshire grit.. you'll never find it again!

[@jacobusj.minderhoud6390]

any bowling ball has a unstable core inside that makes it possible to make trickshots, the white you seen inside after you had the lid of, was that core. it is more dense and heavyer then the rest

[@rumpeltyltskyn]

I love your videos, Nick! They’re so fun and silly and relaxing after a long day at work. Your sense of humor is awesome! I was also wondering, have you ever had a serious injury while working on one of your projects? I noticed you got a cut during this video!

[@darkmatter4752]

Should've made a bowling pin for the finneal (sp.)

[@stormy_kb4064]

Like you, this is truly one of a kind and amazing! I absolutely love how creative you are!

[@nickzammeti]

Sarah Storm hey thank you sooooonmuch xx

[@TAMI5774]

Should have made the handle look like a bowling pin ...that would have been cool looking.

[@stephenives6138]

That blow out definitely will raise your heart rate glad you're all right Worked around machining myself Like the vids

[@ashleewhitbrook8992]

you should have just put 3 holes in the lid like a bowling ball to lift it off

[@Teenteen1976]

A Bowling-Bowl! I absolutely LOVE IT ♥ ♥ ♥

[@c.m.e.l.7477]

A bowling lane inlay on the bottom would have brought the mini bowling pin finial all together.

[@WorthyMissJ]

I would have cut the ball in half and made a matched set. Just me, though...