BRAND NEW 20-TON Shop Press: Introducing the VersaPress

[@Mythos-pd6px]

Have you considered making one with a bit more force around the 40-ton and fast travel speed for blacksmithing? Really like your products been eyeballing a tube bender for a while and your press setup looks great and would easily be adapted to a blacksmithing role.

[@RogueFabrication]

That is a super good idea for another product down the road....

[@Lwimmermastermetalart]

Extremely well engineered. For a hobby shop I believe it would be way too expensive though. Hard to beat the HF one for the money. I did a load of modifications to mine. I just have a hobby shop so it’s fine. In the real world of production this is perfect. Well produced video as well 🤙🏻

[@RogueFabrication]

Thank you for the review! We knew a lot of people have the HF press as it is cost effective and does the job, which is why we created the HF conversion kit for whenever you are ready to upgrade :)

[@That_Spicy_Fiero]

I like that you can grow into the system. Yall always kill it. It seems that few companies have an understanding of how those of us that work out of a garage truely operate. You nail it on the head every time. Keep up the good work and I look forward to what is in store in the future.

[@RogueFabrication]

Congratulations, your comment won the mystery box giveaway! send us an email to [e-mail] with your shipping address so we can get your mystery box on the way to you!

[@That_Spicy_Fiero]

@@RogueFabrication Love your company!! Keep up the good work.

[@jgemeinhardt3955]

I love the stress analysis you've done on the table of the press and of course the force control is so handy for repeatable processes

[@RogueFabrication]

It is very handy in the production setting!

[@bentonedge]

I love the Auto up and being able to use the press help lower the table. BRILLIANT IDEA! I like everything.

[@RogueFabrication]

Thank you!!

[@michaelowens6163]

This is a great addition to the RF product line up. I really like that it can be ran off the same pump that is on my M605 bender. Can’t wait to add this to our shop!

[@RogueFabrication]

Right on, this will definitely be a great addition.

[@neilf.7222]

I like the detail put into the twist lock pins and the ability to dial in a value and press to it. I have used other presses that are really fast and will smash that pem nut through the part. Well done.

[@RogueFabrication]

It is a really cool feature!

[@builditgarage]

Great work on the press. You thought of a lot of things to make it awesome and to help people upgrade over time. I definitely like the pressure adjustment and digital read out instead of just a pressure guage. That makes it so you can see exactly what pressure you have instead of somewhere around it.

[@RogueFabrication]

We appreciate it, this was definitely thought out from a fabricators point of view.

[@Gimp_82]

I like that you guys did the apples to apples test, showing the in depth thought out plan put into this unit

[@RogueFabrication]

Hey thanks for noticing! We appreciate it.

[@kricketscreations4887]

Love the adjustability of the rogue fab tools The press is a nice addition to the family there Love the auto up and the forced stop on that press

[@RogueFabrication]

We are happy you like it!

[@kricketscreations4887]

Been welding and fabricating for 25 years an the guy that did the mud life Jeep for Mudlife magazine when I worked at custom truck shop years ago and about a year ago had the opportunity come up to take over and open the doors back up before they close for good on an older automotive machine shop So lots of the tooling and machines are pretty old And boy would love to win some Rogue fab Equipment . I just hope whoever the Lucky person that does win actually uses it and don't just sell it @@RogueFabrication

[@orangetruckman]

I really like how you went the extra mile in designing the press. Measuring the defection at full pressure is top shelf 👍🏻 excellent job! I also appreciate how you didn’t put down the Harbor Freight press, as it is designed for a different group of folks. Very classy of you 👏🏻

[@RogueFabrication]

The HF is still a good, cost effective option. We didn't want to take away from that which is why the conversion kit was born. Thank you for the words!

[@orangetruckman]

@@RogueFabrication Thank you for bringing an area of fabrication from the stone age to modern times.

[@thisburittoisfilling]

The auto up is awesome, also like how simple the dro is to operate!

[@RogueFabrication]

Thank you. We decided early in development that there should NOT be a touchscreen on a press like this. Too hard to use with gloves, too hard to train new operators on, and too many things to go wrong! The result was an easy to use interface of 2 switches and a dial :) -Joe

[@grantprins2861]

I like that you make your own controls. Seems to be extremely easy to use and very informational on what is going on when using the press. Hopefully you integrate bending controls at some point when you release press brake kits and dies for this.

[@RogueFabrication]

Very user friendly. Thank you for the idea, we are always looking for new things to make!

[@amodelman7]

I like the versatility of being able to start out with a basic machine and being able to upgrade as the need arises. I myself make several custom parts for motorcycles and hot rods, and also modify custom wheelchairs for people who need something more specific than what most companies can offer. Where this setup would be extremely helpful for me also being part time wheelchair user is in lowering the work height so easily using the hydraulic ram. Right now that’s an extremely difficult thing that I do at least once a day. Please keep up the awesome work at bringing USA made products to the American people!

[@RogueFabrication]

Thank you for the kind words! This sounds like a great application for you! We look forward to a future order from you.

[@BumDogSuMo]

I like that you guys put so much thought into your tools. Videos are great. Love my 600 tube bender. And that press!! Dear Santa… lol

[@RogueFabrication]

We hope santa listens to you this year!

[@mikegomes7160]

I like the time you take to design your equipment before you release it. It really shows in the quality and use friendly features on all your products !!

[@RogueFabrication]

Thank you!! We want customers to love our products as much as we do.

[@kramerfab]

Wow, super nice. I like the repeatability with ability to dial in the pressure applied.

[@RogueFabrication]

Thank you!

[@ericbraun819]

I like the accuracy

[@RogueFabrication]

Thank you!

[@b.j.carpenter1976]

I like the new press force control option seems very well thought out and executed...

[@RogueFabrication]

Thank you!

[@Alexandermade]

i like that you guys shipped the bender i ordered today!! Badass shop press too!

[@RogueFabrication]

Hope you're loving your new bender!

[@Chainwrangler001]

Great addition to your lineup! I like the fact that it can be run from the bender's pump. Well done😁👍🏼👍🏼

[@RogueFabrication]

We definitely like to be simple and efficient!

[@SegoMan]

I see the engineering required for some very affordable and accurate press brakes. throw in some limit switch's , back gauge it and up the tonnage!

[@RogueFabrication]

Thank you for some new ideas! We appreciate it.

[@leprechaungarage]

I like everything about your press’s , the HB upgrade and the RF 20 ton .

[@RogueFabrication]

Thank you!

[@LZM808]

Very cool. I like the pressure control and the ability to retrofit a Harbor Frieght press is a nice touch.

[@RogueFabrication]

Agreed! We know a lot of our customers already have the harbor freight press, so it was a no brainer to make a conversion kit for it. Thank you for the comment!

[@c.harris7823]

This is great! I can't wait to get one in my shop. Well done RF!!!

[@RogueFabrication]

We look forward to seeing an order from you!! Thanks man

[@Marcus_Woodard]

I like that you guys designed it so that you can use the tube bender to power it. The only thing I think it’s missing is the ability to slide the ram side to side to do offset pressing.

[@RogueFabrication]

You can mount it on either side or the .middle :) -Joe

[@BradSewell]

I like that you tested and shared the FEA model.

[@RogueFabrication]

Thank you!

[@TownHallKustoms-bc5mv]

I like that you can use the advanced controls to your advantage on plasma cut parts. This has always been a issue.

[@RogueFabrication]

We are glad this takes care of that!

[@tylerleany6862]

I love how you can set the pressure of this

[@RogueFabrication]

It is very user friendly!

[@okoffroadmowers]

Awesome product guys! Love the features

[@RogueFabrication]

Thx Ryley! -Joe

[@robotmartin1]

i like that as with everything you guys make you can grow it or start small and then move up

[@RogueFabrication]

We wanted to make options for everyone. Thanks!

[@AddictedCreationz]

I like the auto up feature, as well as the hydraulic power unit. Is the versa press the same internal width as the other 20 ton presses?

[@RogueFabrication]

Thank you, we are very proud of it. The VersaPress is 23 inches and the HF press is right around 22.25 inches between uprights.

[@JJordan-wr2qq]

I like the accuracy given by the digital readout for production applications

[@RogueFabrication]

Thanks!

[@zacbishop9561]

I like the advanced control for repeatable results.

[@RogueFabrication]

We do too!

[@rattyfab]

What a beautiful piece of equipment! You guys really nailed it on this one.

[@RogueFabrication]

We are glad you love it!

[@rattyfab]

@@RogueFabrication sure beats the air/hydraulic setup I made for my basic 20t lol. Might need one of these in my life.

[@mikeobrien6954]

Awesome machine, great use of 1 power supply for multiple equipment

[@RogueFabrication]

All about that mix of economics and quality!

[@randallhinds9463]

Very Cool.....I like the ease of operation control panel and the overall mobility with the HD casters 😎👍👍

[@RogueFabrication]

We just can't stop finding uses for these casters!

[@launchpadengineering7749]

one more must have for the shop.

[@RogueFabrication]

Yes it is!

[@tiny_the_200]

Good job allowing someone to take the baby steps from the HF model before full commitment of yours 👍🏼

[@RogueFabrication]

We want to make it as user friendly as possible!

[@jacobfrederick7647]

I like all the thought you put into the table design. I'm in the market for a quality press.

[@RogueFabrication]

We would love to quote this out for you. Give us a call at 503-389-5413 or email us at [e-mail]

[@lazyhoundracing9621]

Very nice. I like the repeatability of the auto pressure setting. It would be nice for dimple dies for sure, When do we get a bead roller?

[@RogueFabrication]

Yes, That feature has made production of some of our products a lot more pleasant and faster! We have more tools in the works, soon to be released. Stay tuned! Thanks

[@WillieFisteraz]

I like that advanced control setup!

[@RogueFabrication]

Thanks!

[@J-pm3hh]

I like the foot pedal controls the science on the table making it ridgid

[@RogueFabrication]

The foot pedals are for sure handy

[@FlashPerformance]

Love it! Nice work!

[@RogueFabrication]

Thank you!

[@pearcealo9167]

I like that you can raise and lower the table with the hydraulic cylinder

[@RogueFabrication]

I would be a liar if I said we were the first to think of that... but it sure is a nice feature ;) -Joe

[@launchpadengineering7749]

i like that the press has repeatability

[@RogueFabrication]

We do too!

[@mitchellgarcia3532]

Awesome, Love the force controller. Slick setup and is very well thought out.

[@RogueFabrication]

Thanks Mitch. This was a major project and we're happy with how it turned out

[@silver_cd]

I like how beefy this press is. I have a HF 20T press and deflection has been my concern with it

[@RogueFabrication]

Yes, the overall defection of the HF press surprised a few of us in the shop when we ran our tests.

[@roguefab]

Can't wait for this one!

[@seansysig]

Well engineered and thoughtful design.

[@RogueFabrication]

Thank you, Sean! We put a lot of effort into this one to make it how WE would want it to be for our production/prototype shop :) -Joe

[@DeanGamble-i1s]

Very cool! Would like to see it as a break also would make nicd repeatable part im sure. Nice stuff!

[@RogueFabrication]

Make sure you subscribe. We have one built and we're testing it now! -Joe

[@veganbutcher3448]

I like the controls super cool!

[@RogueFabrication]

ThaNKS brnadon

[@rogerharris118]

That what I have been looking at buying

[@RogueFabrication]

Give us a call, We will get you sorted out. Thanks

[@EcoMouseChannel]

I would like it if you offered wider top and base that we can swap the guts over if we should want more capacity in the future.

[@RogueFabrication]

We are always looking for suggestions on new products that would sell, thank you!

[@collinmcclenahan9957]

I like the blooper reel

[@RogueFabrication]

Watch our most recent one! kzbin.infoOnjpglIL7BQ

[@paulmcswain4257]

I like the ability to use it to lift. Are you going make on larger press with the ability to have a 48 inch brake?

[@RogueFabrication]

The evolution of the product line leads to a 48"..... YES.

[@davidschnabel1304]

Does the hydraulic cylinder exert pressure in both directions?

[@RogueFabrication]

Yes, it's double acting (power return). Good question! -Joe

[@davidschnabel1304]

Can AVK Rivnuts be installed on the press?

[@RogueFabrication]

If it's possible to press them in, this can do it. I didn't see evidence either way. Just people using the AVK pull tool. I'm sure it's possible, just might need a special tool to go in the press. What size do you use?

[@chapinj]

Looks nice

[@RogueFabrication]

Thanks

[@erikskaggs2651]

Very nice.

[@RogueFabrication]

Thank you!

[@veganbutcher3448]

I like blank!

[@seancrook6675]

Price of each unit ?

[@RogueFabrication]

Link in the description. Thanks

[@ninja2342]

cool

[@RogueFabrication]

Thanks