Ford Everest Intake Manifold & EGR Removal DIY | Ranger | T6 | T7 | TDCi | 2.2 | 3.2

Step by step DIY guide on removing Ford Everest/Ranger Throttle body, Intake Manifold, and EGR. Comment below for any questions and I'll try to answer whenever I'm free. Hope you like this video and don't forget to subscribe! Thanks! :)
Follow us on Instagram: / btdgarage

[@arielatom03]

THANK YOU SO MUCH. Was doing glow plugs and took the egr motor off to remove the manifold easier but some jerkoff messed with the position of the lobe while it was off and i couldnt get it back on. Here i could see the exact position and it went right in. 5 stars 🤘

[@btdgarage]

That’s great! Thank you :)

[@kiniraega3394]

Thank you BTD Garage for sharing this video. 👍🏽

[@chrispryer1280]

Thank you bud never done one on a ranger made my life so much easier 👍.

[@btdgarage]

Thanks! :)

[@heikotauschke1711]

Well done! Greetings from Germany

[@ginahiceta6828]

Wow amazing job!

[@superadryan]

Thank you so much for this video!!!

[@MystiriousMind]

Thanks for the idea sir. It is helpful. I can do it on my own. DIY . Next video . Turbo cleaning please 😅 thank you

[@xrpripple6549]

Verygood video! But when it said its time to remove the intake manifold and used a pair of wrenches to remove a rear bolt, I changed my mind to calling my mechanic let him watch this and just buy him some beer😅

[@craigharrison9446]

needed this before i started on mine

[@polaris199pt]

Great sequence, good vdo

[@wernerjansen9387]

Well here I thought I can do it on a Saturday morning by my self...... So that idea went out of the window at about 3 min in the video. Thanks for the heads up. I will be taking my Ranger to a professional to do the cleaning.

[@terminatortre24]

Please dont, mechanics dont want to work on cars because of Fords. Just throw in in the bin and buy a new car

[@jennieco9706]

Nice!

[@jamestien6761]

Priceless video, thank you so much for sharing your knowledge.

[@btdgarage]

Thank you!

[@masuzyokumwenda9730]

Thanks

[@larryli1812]

Very good video, thanks! Could you please do a video on removing the EGR cooler as well please?

[@btdgarage]

Thanks! I’ll try to :)

[@moksmekanikongpandagat5256]

Sobrang galing ng pagkakagawa ng video detalye. Salamat sir sana madami pa sa ford ranger. More power para more video.

[@btdgarage]

Thank you po

[@arthurmaghinay1759]

been watching for the this video on how to remove the egr valve. I 've done mine at 60K+ odo but unfortunately wasn't able to remove the egr valve because of that one(1) nut that i could not access considering the space constraint. hopefully i could remove it, diy next time..:).. thanks for the video sharing sir. God bless

[@btdgarage]

Thanks! :)

[@marcusbarnes5929]

Can you do a video on EGR cooler removal and coolant line bypass.

[@magicheats8291]

Is this the same for a 2.2 L diesel ford ranger hi-rider 2013 model??... Roughly how long is this take to replace egr vavle and clean manifold??.. best video I've seen so far awesome work

[@Dude00711]

Do I need to replace intake manifold gasket set at the same time as this or are they made for long lasting usw

[@lyellbro1]

Great job, I would have burnt it by now

[@stephenmulholland4868]

Great video..but how many km did this vehicle have?

[@poogzie]

Hi took the ranger 2012 2.2 diesol to mechanic to replace glow plugs,plugs came out easy and put the motor back together i drove it for couple of hours and engine light came on ,code was p042f egr valve closed ,called the mechanic he wasnt much help stated could delete the egr all together . any suggestions would be appreciated .also great video.

[@TORTLESSS]

sir may quotation ba kayo rebuild ng 1st gen fortuner 2.7 vvti, both its AT transmission & engine

[@ricardofield9250]

Thank you so much for the video. I sure couldn´t do it without this video. Any advice on how to get stuck glow plugs out?

[@terminatortre24]

Set the car on fire, its just a Ford. Get the insurance money and buy something proper

[@AustinPetDetective]

Intelligence of an ant.@@terminatortre24

[@andyh3314]

I have a 2016 Ranger. The engine management light came on firstly a bout 6 months ago but the mechanic cancelled it out as he said it was possibly a sticking EGR valve. I an see from your video that it was a buggar of a job and an easy fix just to cancel out the codes. Months later (2 days ago) the same happened again. (He cancelled out the code). What do you suggest? 120 000km on the clock. I use Premium diesel and service the Ranger every 6 months. Should i have the EGR valve serviced or replaced? Can i use a Diesel intake cleaner to help free up the sticking valve?

[@raphaelturenne]

do you have anything on a 2012 Ford Ranger T6 2.2L diesel?

[@nielgan9729]

How to disconnect egr connector?

[@BudiSuwarno-qv5kv]

Hello.. my everest 2016 engine is shiver when it idle and the ac is on.. Can you help me sir?

[@georgepalacayjr.3938]

Are you from the Philippines? If you are. How much for cleaning my ford everest 2017 trend?

[@Mosesk1988]

How many kms had this done?

[@jayvee7001]

Hi sir do you have any egr cleaning video on 2.0 engine?

[@btdgarage]

Sorry we don't have one yet. We'll try to make one as soon as we get a chance :)

[@dexbethenamedex9632]

Now cleaning my inlet manifold etc, carbon buildup was 8-10mm thick 🤦‍♂️

[@marcusbarnes5929]

Did you have a catch can?

[@venom3x]

Great Job! To replace the 5 glow plugs on a Ranger 3.2 i have to follow this steps too, right?

[@btdgarage]

Yes bro.

[@lastpaceended5866]

Also trying to find a video showing how to replace the glow plugs on a 2012 3.2 ranger. Do you have to remove the EGR to get to the glow plugs or is moving the Manifold enough to access the glow plugs? Loving your videos Thanks

[@btdgarage]

@@lastpaceended5866 Yes you can access the plugs once you remove the manifold. Thanks :)

[@niselnazareno8164]

Magkanu po kaya ang labor kapag magpalinis ng EGR at intake

[@jesusimomartinez6598]

Good pm boss.i need your help. Ford everest 2011 Diesel.. Issue.ignition on the engine light and glow plug light not showing and cranking but engine not starting.pcm connector no power supply.where is the location of PCM RELAY? THANKS

[@gutadin5]

How many mileage now?

[@chrisbv2570]

How many klms did this car have on it?

[@franciscoandres9053]

awesome... a bit curious with coolant hose.. do i need to prime it after I put it in place..

[@btdgarage]

Hi brother, simply put it back in place and top up the coolant reservoir upon starting the vehicle. Make sure to let the coolant system “bleed” for a while or to let the air bubbles escape while idling. Drive the vehicle around for 10-15mins then recheck the coolant level and top-up if necessary.

[@franciscoandres9053]

@@btdgarage Thank you for this video, I learned a lot.. hope more videos to come.. thanks again for sharing...

[@btdgarage]

@@franciscoandres9053 Thanks!

[@Amby0007]

Do we need to prime it after the fuel filter is changed?

[@btdgarage]

Yes

[@kevinelove4711]

Japanese Suv like Mitsubishi is easy to remove Egr. This one is troublesome.

[@Nomnom08]

do you need to relearn the idle after the cleaning?

[@rogeliojr.villanueva4860]

Yes. Everytime you need MAP and MAF

[@pasindulakshan9038]

in how many kms this manifold cleaning required? i own a ranger t6 3.2

[@btdgarage]

We recommend it every 60Tkms

[@arnoldoreal4333]

Where po located ang shop ? Thanks

[@rommelsantos8706]

Ngtanggal ng bateri pgllinisin egr kailanga n ireset ng scanner bgo start a engine

[@miniemamao1797]

Do u recommend egr delete for longer life of the engine?

[@arielatom03]

You will get a check engine light

[@theowenssailingdiary5239]

@@arielatom03 I didn't..

[@user-is7bn4hu1p]

Great video, but way too much trouble for this guy. At least now I know I wont be doing it. Ha Ha. Thank you.

[@briethlayson3270]

Bloody hell !

[@tombradley4842]

I have a 2019 3.2 ranger with 18000 miles on the clock & I've seen a lot of KZbins about egr & coolers failing do I need to be concerned??

[@btdgarage]

Not really. Just have your EGR cleaned every 40k miles. 1st sign of egr cooler failure (internal coolant leak) would be white smoke on startup. But this usually happens on a few high mileage units. We’ve had 3.2 rangers in our shop with 200k+ miles on them but still have perfectly working egr/cooler. If ever this happens to you, either replace the cooler or just bypass the coolant hoses to the cooler and blank the egr on the exhaust end - you’ll need a tuner who can also disable the EGR on the ecu for this.

[@tombradley4842]

@@btdgarage thank for the information much appreciated.

[@teeanahera8949]

@@tombradley4842 ebay has plug and play kits to fool the computer into thinking the EGR is not required.

[@nhellaureano5620]

Sir san po loc nyo, low power po kc everest ng bos q pagawa ko sa inyo 2017 model 3.2

[@btdgarage]

Waze: BTD Garage in Q.C. po thanks

[@robertsison2968]

What model is this everest? Is this the one with 3.2 liter engine?

[@btdgarage]

This one is 2.2

[@gutadin5]

@@btdgarage is this Everest Trend?

[@btdgarage]

@@gutadin5 Yes

[@gutadin5]

@@btdgarage if i buy a 2021 Everest trend now, do you you know how many years or thousand kms before issues will come out? after 4 years or 45,000 kms?

[@rommelsantos8706]

Mgkno palinis

[@carlomaverickespina1428]

sir.may EGR na po ba ang everest 2005 model?

[@btdgarage]

Yes

[@gLeM187]

Sir ask ko lng sana. Ranger po kasi unit ko 2.2 dn. Same parts dn po b lhat to? Balak ko dn po sna diy maglinis. Sna mkagot nio sir. Salamat po

[@btdgarage]

Yes po

[@gLeM187]

Thank u po!

[@angelonocedo5564]

Sir. Ano po recommended cleaning solution mo para sa lahat ng parts na lilinisan? Planning to clean mine 80k kms na. Thanks

[@btdgarage]

Hi, you can use engine degreaser on the manifold & egr valve then rinse with a power washer. Just make sure to remove the sensor on the manifold and the egr motor. Use an electronic parts cleaner or Maf sensor cleaner on the throttle body.

[@angelonocedo5564]

Thanks sir

[@gutadin5]

@@btdgarage totoo ba na sirain daw ang ford?

[@irvinnolasco8160]

Saan nyo po nabili ang mga special tools na ginamit niyo po? Nahirapan kasi akong maghanap ng star screw driver eh na 12mm. Salamat po

[@irvinnolasco8160]

I meant yung tool po na pang remove sa torx screws, where did you purchase it po?

[@btdgarage]

Online Sir madami. Try Lazada or Shopee. Get the branded ones po para durable.

[@irvinnolasco8160]

Anong specs po ng torx key nyo po? May nakita kasi ako sa Shopee Ingco torx key na T50 ang size. Ok lang po ba yun na size?

[@randyibardaloza1210]

location at magkano

[@turbostyler]

I'm doing this at the moment, and I'm hating life. This motor is seriously the worst one I've ever worked on.

[@btdgarage]

I feel you bro :)

[@markconnell6268]

Try installing a diverter valve on a 320i f30 bmw

[@garycarlbalictan3440]

At first brother its sucks, but after your 2nd and third, youll be able to close your eyes while doing

[@turbostyler]

@@garycarlbalictan3440 yeah after doing it and looking back it's not that terrible. But I still don't want to go back there...

[@bethzarin6439]

Too complicated. I hate Ford, a simple job they make it complicated.

[@gutadin5]

Why you hate ford?

[@bethzarin6439]

@@gutadin5Are you not reading my explanation? I said a simple job they make it complicated. Are you not reading my explanation? I said a simple job they make it complicated. Are you not reading my explanation? I said a simple job they make it complicated. Are you not reading my explanation? I said a simple job they make it complicated.

[@gutadin5]

@@bethzarin6439 repent of your sins and accept Jesus into your heart as Lord and Saviour and you will be saved John 3:16 Jesus the only way to heaven John 14:6 Give your life to Jesus Ask Jesus for your salvation.

[@bethzarin6439]

@@gutadin5 repent of your sins and accept Jesus into your heart as Lord and Saviour and you will be saved John 3:16 Jesus the only way to heaven John 14:6 Give your life to Jesus Ask Jesus for your salvation.

[@gutadin5]

@@bethzarin6439 you too, i already gave my life to Jesus.

[@acertijoacertijo2543]

hola, saque el motor o actuador (8:06) de la valvula egr la volvi a armar y hace un ruido cuando la apago, sabes porque hace ese ruido o es normal? saludos desde Argentina 🇦🇷

[@Rsvmick1]

Ffs use an oil fumes catch can. When will people learn.