Building a Custom Tooth Bar

[@since1876]

This is a good video. You did a good job at making it short and to the point, as well as very easy. And, honestly, if a person doesn't have a welder, just get on craigslist and tell someone if they bring a welder out, you'll pay them 75 bucks to do all the welds. Won't take someone who's a good welder more than 15 minutes, probably.

[@HLTOOTH]

Excellent Job! This is one of the best custom tooth bar jobs we have seen using our H&L Tooth 230 System! Great Work!

[@michaelc9128]

Where did you get the shanks and teeth from

[@909drummachine]

Amazing idea! You invented something very clever. Congrats

[@oby-1607]

Good thing you used a bigger welder as the dissimilar metals would need the extra heat to get a proper weld. Well executed. Now I have to order more stuff off of Amazon thanks to you.

[@Formerlywarmer]

Nice job and helluva savings on cost. Pretty enjoyable project, teeth not available currently.

[@garylester8621]

Thanks for the video. I'm doing the very same thing as soon as the teeth come in. This help confirm how to do it.

[@precisionforce2463]

Nice job and nice video. I bought a 324 last week and already can tell I need a tooth bar! I’m glad you’re making Videos of your Yanmar, there doesn’t seem to be many on KZbin...yet.

[@LazyBrookFarm]

Oh i love my tooth bar! its a beast now! I am glad you enjoyed it, i am hoping to make a lot more! anything you want to see?

[@garlandhood9729]

What tooth brand did you use I need to start one tommorow for my 3038 Jd I don’t have sound do you mind typing the total parts used in this I just can’t see 500 hundred plus from Jd dealer thanks tommy

[@pxmnh316]

Great job Mark! I always learn something new watching your videos.

[@LazyBrookFarm]

thank you!

[@michaelranasinghe3774]

I am going to Do this to my YM2310D. Thanks for the inspiration!

[@genecoppedge5972]

B.F.H. always works. Nice job on the tooth bar.

[@kaseycasece1340]

YOUNG MAN , U DID GREAT JOB !

[@billmers3219]

Hey Mark, great job! Be a nice project for me 💯

[@Sam-pw8zh]

How ❤ that. I can't wait to build one

[@subixbarbarasson2544]

You know something? That really looks good man. Great work.

[@LazyBrookFarm]

Thank you Subix! I really enjoyed making it, and it helps out so much! really changed the versatility of the tractor!

[@subixbarbarasson2544]

Lazy Brook Farm I aktully building a FEL for my 91' Jeep YJ. Using a winch and a quick removable pully tower. At least for lift. Then some 12v ram/linear aktuators in place of hydrauliks. Imagine a brutal garden traktor. And also my FEL will be detachable for daily driving. But attachable at job sites klearing brush etc. :D

[@LazyBrookFarm]

I would love to see that! it sounds like quite the project!

[@subixbarbarasson2544]

Lazy Brook Farm Yeah dude. Lol. It's a long story. I'm learning to weld as I go. Hahaha. Stikk welding thinner metal sukks with an AC225 Tombstone. I need some smaller rod. All I have now is 1/8 6011. Man if you are on FB send me a message and I'll send you a video in return. Subix Barbarasson There is a blakk Jeep and my 🐺 smiling out the window. Also it will say "Истина" on the bottom. Her name is "Istina" Serbian word meaning "truly/true".

[@prakashwelding7675]

Nice job brother

[@kevinashby3784]

Nice build

[@garyteague4480]

Great job sir

[@sazzamittendorf1651]

I will have to show this to my friend, since he just bought a tractor. He a good welder.

[@LazyBrookFarm]

It is worth the time and effort!

[@sebastian56309]

What a great video, just subscribed. To bad the bucket wasn't a mesh bucket to let all of the dirt fall to the ground as you pick up the rocks.

[@fleaniswerkhardt4647]

Great job. Does it require a special grade of steel for the bar?

[@LazyBrookFarm]

No, I used mild steel, it's still holding up great!

[@dannytheplumber7394]

Thanks for the video , exactly what I was looking for.

[@nickosowski9305]

Great video ! I was curious, how does it work for back dragging ? Does it stay tight to the bucket or does it try to pull away from it ? Thanks, your latest subscriber.

[@LazyBrookFarm]

Stays tight to the bucket! Even lost the bolts and it still stays on!

[@nickosowski9305]

@@LazyBrookFarm That's great to know. Thank you ! Looks like this weekend I'll be paying a visit to Amazon and the iron shop. Thanks again for the how to video !! Have a good 4th

[@dalemasyk1583]

DAMMMM I LIKE THIS IDEA VERY MUCH ...PRETTY FCKIN COOL BUD TKS ...WILL RIG ONE UP FOR MY FUTURE MINI CLEAN UP BUCKET NOW

[@christianhulse6238]

Would 3/16” bar work? Or would that not be strong enough? What is the thinnest you would have the bar?

[@LazyBrookFarm]

I think that might be a bit of the thing side. Part of the reason I did 3/8ths was the teeth I used required that thickness to sit correctly on the bucket. Much thinner would have damaged the bucket with use.

[@ke6bnl]

Will those work if I have a 5/8 bolt on cutting edge?

[@johnmachutas5920]

HI HAVE A 1025R THOUGHT OF MAKING MY OWN TOOTH BAR .WHERE DI YOU GET THE TOOTH ASSEMBLY?THANKS

[@frankjones5283]

I was thinking about a DIY tooth bar until I noticed a finished 66" bar by Titan for twice your investment. It has a .5 thick bar but I will need to reduce the length to fit my bucket. Great video!

[@LazyBrookFarm]

that should work out well for you, especially if your welder isnt quite up to 1/2 inch plate!

[@frankjones5283]

Yep ..plus reducing the bar length will leave me with a nice piece of steel left over but it will have a tooth welded on it ...lol

[@fordtrucker1104]

How far back was the center of the hole from the edge of the bucket?

[@LazyBrookFarm]

About 5 inches, it isnt anything precise, the bolt doesnt take any load, just keeps it from falling off when you dump, i even forgot to out them in once, and the teeth stay on!

[@polemidis]

You just cost me $120!! :) :) Thanx!

[@LazyBrookFarm]

Glad to help?? You will have to let me know how it comes out!

[@prakashwelding7675]

And good morning brother

[@oldstudbuck3583]

Thumbs up good content. Please, please drop the music it’s very annoying.

[@bandmasterjf]

Do you recall the overall length of the weld on part?

[@LazyBrookFarm]

I think the mount for the tooth was about 6-8 inches total length, i can mesure if you need some more accurate numbers

[@bandmasterjf]

@@LazyBrookFarm Its ok. I found some that worked.

[@SharonNewman1]

See you on Michael Feyrer live. I got you ✅

[@eddiesuttles5121]

I'm in need of a tooth bar for a 59" 3/4" bucket...please help me.

[@LazyBrookFarm]

Sure! You just need to get a chunk of 3/8ths steel and some bucket teeth! If you dont have a welder, i think piranha makes one that might work

[@martineastburn3679]

Now you can drive into a stack of road rock and fill a bucket when in 4-wheel and low. Just goes in fills and I rotate an pull it up. Then off to fill holes in the road.

[@RockhollowCNCServices]

Where did you get the teeth

[@LazyBrookFarm]

I got my set on Amazon amzn.to/2tY62td But I have also seen them on Ebay. They are TF23 bucket teeth, the same ones you find on the Titan toothbars

[@eddieco]

great idea! How has this lasted? Have you used it a lot?

[@LazyBrookFarm]

so far its going strong, not one single repair, or even a repaint. I have put around 150 more hours on the tractor with it, almost never take it off. I have lost the bolts a few times, but the bar says on most of the time, even without them!

[@eddieco]

@@LazyBrookFarm Thanks for the reply!

[@rclsupply3371]

FOR SOME REASON I DO NOT SEE THE LINK IN THE DESCRIPTION FOR THE TEETH AND SHANKS

[@LazyBrookFarm]

here you go. TF23 Bucket Teeth: amzn.to/2tY62td

[@liyuegong1273]

Sir my factory specializes in the production of excavator forging bucket teeth ! Hope you can contact with me !

[@williamratliffma5250]

you can do with out the music.........too loud anyway

[@jimputnam2044]

the close ups are freaky Mark hold the cam farther away, your nose hare needs trimming.

[@rajuctr8909]

Sir I am welder job vacanci

[@tigger126]

Too bad those teeth are not available :(

[@LazyBrookFarm]

looks like they are back in stock! www.amazon.com/gp/product/B017DUK7PW/ref=as_li_ss_tl?ie=UTF8&psc=1&linkCode=sl1&tag=lazybrookfarm-20&linkId=20de7a30ac734b6acaafb982c9439455