Building a Real Estate FPV Cinewhoop

[@villadante]

Just gave a test to your rates and I cant believe I was flying indoors with such high rates for so long!! My stress level on jobs will certainly go down!

[@ketratech8165]

What rates do you charge?

[@Hoss8676]

​@@ketratech8165 24 min in the video

[@PothocketsFPV]

@@ketratech8165 Rates in this context refers to the sensitivity of the controls

[@motoluko]

@@ketratech8165 hes talking about rates that you tune inside betaflight dude

[@martinshaw6907]

I spend half of my life now watching your videos I have to say your you are costing me vast of amounts of money I have just ordered parts for fpv drones and will be following your builds MANY THANKS KEEPS ME BUSY HAHAHA

[@rthairlines]

Great video. Thanks for this. And without the screaming of the engines and the massive wind, along with the music, it looks like a gentle breeze is blowing the camera through the house on a fluffy cloud. Love it! Oh and the LED is sick, man! XD

[@TRONCATFPV]

thats exactly the vibe I go for with these walkthroughs 🙌

[@sydballa6572]

Where can I get these rates to try them? They sound sweeeet

[@darrylmeans725]

@troncat, I like many have recreated this build in hopes to fly it as you do. Earlier today when I finished it, I forgot to reverse the motors but after I did, I was excited to see it fly. My 2nd complete build and I owe you. I used everything similar except the AIO. I went with a JHEMCU F405 40a AIO. Besides that, everything else is the same. Using the UAV Tech preset, my motors seem to be VERY hot but that could also be because I’m using CNHL 1300mah 6s batteries and I’m learning that those big boys are hunkers compared to similar 6s batteries. I’ll turn down the tune and see how that works out. Thanks again for the comprehensive build tutorial!

[@TRONCATFPV]

Awesome! I have the JHEMCU F405 on one of my other cinewhoops and it works great. Yea that 1300mah may be a little much for it. I'm actually going to have a battery testing video coming out soon where I test a couple different 6s LiPo's. Mainly 550mah - 850mah. GNB has some awesome sized 6S LiPos that work great with this build.

[@RandoManFPV]

Yea I recently got a 1500 cnhl 6s and when I put it on with my gopro 8 it turned my nazgul5 into a flying brick 😂

[@YarivGilad]

I actually want to follow these steps to build this quad (my first build) and get into real-estate fly-throughs in my country. Given this video is a year old. I want to ask you for some updated pointers: 1 - Can I use "Dji 03 Air Unit" instead of the "RunCam Link Falcon Nano Kit" or "Caddx Polar Nano Vista"? 2 - The motors you used are no longer available. which motors would you use today? 3 - The only iFlight FC I could find on their site is "BLITZ Whoop F7 AIO". will it do? 4 - Would you upgrade the battery, or is it still the best option even today for this build? Thank you so much for your amazing videos!! You're a big inspiration!!

[@Basic-AdventurePH]

Remarkable video man... Appreciate your time and effort in doing all this stuff. Thanks

[@TRONCATFPV]

Thank ya 🙌 Glad you liked the video!

[@HansBaier]

I think an important omission in this video is the Motor poles setting. It is left as default 14, but I counted only 12 Magnets on the motor bell. After changing this setting now I can get almost 10 minutes flight time instead of 8 on a 1100 mAh battery.

[@captaindronieversefpv]

what battery you use ?

[@HansBaier]

Gaoneng 1100 mAh, 60C XT30

[@ianmorcott3113]

At 7:26 A few definitions: Nuts have internal threads. If no threads, then the are spacers. External threads are either screws or bolts. Screws have recessed Philips heads, hex heads or some other flavor Bolts have external threads and use a wrench of some type and are gripped on the outside. Love your videos and I have learned a lot from your library. Thanks!

[@ericcoker8784]

Ohhh man, thanks for video and time spent. I really didn't understand "air-mode" till now. All of my 65 and 75 size quads get the throttle scaled to 70-80% and throttle expo at 0.50-0.60 range (I like center stick activity for throttle). PID tune is unchanged. My Flex25 works great with my throttle tweaks mentioned above, with PID tune stock. BUT moving slow indoors!!! No way! She is a heavy girl and sensitive sticks led to ceiling "stickage" and "droppage" to the floor, 😂! Thank goodness it happened twice on the first pack and nothing broke. I got better when I dropped the 🎥 angle. Next will be the five bladed props, lower camera angle, airmode off, and your rates.

[@Descvnd]

I just completed this build, everything went smoothly except the esc flash, I flashed g-h-30 the quad would wobble and yaw right when flying. Betaflight was convinced I had an IFLIGHT_F745_AIO_V2 when I have the iflight beast 55a. Took me 2 days to end up looking back in the esc config to find out my drone was running G-H-50 at 24k esc pwm??? Not what I remember flashing. Force flashed G-H-30 and 48k pwm. Solved all my problems!!!

[@TRONCATFPV]

Glad you got it figured out!

[@carlosbetancurt1920]

Man, I'm having the same issue.

[@carlosbetancurt1920]

Can you help me?

[@HaydenSummers]

@@carlosbetancurt1920 check what ur board wants, mine wanted g-H-50 and I flashed it with that. It would yaw right and wobble. I went back to esc config and it said version G-H-30 was flashed. I just corrected it and am having amazing success, smooth flights.

[@carlosbetancurt1920]

​@@HaydenSummersI did it thank you man but with the 6s battery and the gopro naked from geprc my front motors get too hot. But the fly is much better.

[@HansBaier]

I just tried the Gemfan 5 blades on my Cinebot30 and they are FANTASTIC! So much smoother and easier to control and they sound so much better too compared to the HQProp 3 blades. Great tip, thanks!

[@mathiaskrokos8961]

which exact article are the blades for the cinebot 30?

[@lopesdev]

Do you use cinebot 30 for real estate/indoors? Im not sure if i get cinelog 25 v2 or cinebot 30 for this type of works.

[@HansBaier]

@@lopesdev No I don't have the drone anymore. I have a Pavo25 and DarwinFPV Cineapes now. Especially the Cineapes I like very much.

[@quadpartpicker2615]

Love this build. Really comprehensive and awesome tips for indoor flying

[@TRONCATFPV]

🤙🤙

[@Lawrenc795]

Hay ser whats cost of this build

[@clydedigital]

So graceful. Stunning results.

[@SiOgie]

This is it! The video I've been waiting! Great build, great information! You're awesome. Gonna try it very soon on my drone. Thanks a lot.

[@MayDayFPV369]

Awesome content! This is exactly what I was hoping for and why I signed up for your Patreon.

[@HansBaier]

I have already built your 150$ freestyle and I love it! This cinewhoop is going to be next!

[@fastvincent1]

Do you recommend any other flight controllers? The one's in the description are out of stock

[@sydballa6572]

So glad I found this video. Thank you for taking the time to soundly explain everything from start to finish. As someone who is learning, you’ve encouraged me to try this build. I currently fly a cinbot 30. Should the settings you’ve explained help my quad fly better indoors?

[@stellarmediacollective7953]

i run them on my cinebot30 too.

[@TheExcile009]

I’m so glad I found your video I got my cinelog 20 going

[@AerialJohnny]

That colour output is grand

[@eturnerx]

Thanks for the video. I learned a lot. I have a Pavo25 and keep bobbing and blipping it into to the ceiling! Air mode off, lower rates I think. Maybe an indoor/outdoor switch.

[@TRONCATFPV]

yea deff try out that BF setup and it should help ya 👍

[@fxfawkes]

Such a valuable video. Thanks man!

[@bikediaries9321]

Love these video! Keep up the good work.

[@keribangrebus8820]

CRAZY BUILD. 2 inch with full size gopro? get out of here. love your work man!

[@TRONCATFPV]

Thing is a beast (pun intended). I was amped when it lifted that Hero 9. Stoked to throw a hero 11 mini on this thing and see how it does!

[@keribangrebus8820]

@@TRONCATFPV how did you shoot flying outdoors to indoors? Did you put the ISO to auto?

[@DronieBoy]

Do you mind sharing your GoPro settings?? Thank you so much

[@blackdim3617]

Awesome video, i learned a lot,many thanks!!!

[@rclatebloomer7880]

Love the video, very comprehensive, Kudos! I have almost everything, motors on the way, just need to buy the battery, Cheers!

[@kirkerr]

Great build video but I was wondering what width of flight controller can fit into the bottom frame? I have been looking at the SpeedyBee F745 35A AIO which is 36.6 X 36.5 and was wondering if it wouldn't fit.

[@Gordon-Scott]

Great job man! Thanks for sharing 💯👍👍

[@manojmohan7264]

Hello, I love your video and flying style. I am a beginner and have a bunch of questions. Any help is much appreciated. Thanks in advance. 1) Do you think these rates would work decently on the cinelog 25 ? 2)when I fly, I can see every small move i make on the sticks on the feed and that makes it very Jerky. How do you do it so smoothly ? Any tips ? 3) my cinelog 25 is designed to ARM when its on STAB mode. It sounds smooth when I ARM it. But the moment I flick to acro mode, it sounds very erratic. Wondering if thats normal. 4) I am unable to see my flight time on the goggles. I do see an entry with the time at 00:00. But it doesn't start counting up. And I dont see any stats when I disarm. How do I get it ? 5) I took it outdoors near a river one day and the feed was so pixellated even when the quad was just 10 feet from me. I thought a crossfire would have great range. Any tips there ? ( I tied the wire that goes from the camera with a metal wire tie. Wondering if that would cause a problem) 6) what are the benefits of ACRO mode over HOR mode when flying indoors ? I find the HOR mode to be very smooth. Do all indoor pilots fly in Acro mode ? Thanks again !

[@TRONCATFPV]

1) These rates should work fine on a cinelog. The only thing I can't vouch for is the PID adjustments/cinewhoop preset 2) Best tip for this is trying out the rates that are in this video 👍 3) This i'm not sure about. I'm not completely familiar with how GEPRC has setup the Cinelog25 from the factory. Feel free to send me a video of this issue to [e-mail] 4) Are you flying digital or analog? unfortunately with digital as far as I know, the flight time OSD feature doesn't work 5) Crossfire should be fine, it sounds like you have an issue with the video transmission. I would definitely remove the metal wire tie and replace with a cheap plastic one to see if this resolves the issue. Things like this can actually interfere with the signal. 6) I prefer acro because it makes the video alot more fluid. When in angle or horizon the drone will always be trying to level itself out and this can interfere with the overall fluidity in a video like this. Hope this helps 👌

[@manojmohan7264]

@@TRONCATFPV wow thankyou very much for the elaborate reply. I will try out all your recommendations and keep you posted :)

[@OvelarFotografia]

Hi there. I saw you used HGLRC Aeolus 2500kv 1303.5 into the Pavo25 and BETAFPV 2004 1700KV motors into de Pavo30. Both of them good for 6s batteries. So, as far as you have tested both of them into a cinewhoop, which one do you prefer more?. Would you change the ones into Pavo25 to the Betafpv?. I am building a Pavo25 with the F722 35A AIO Brushless Flight Controller instead of the iFlight (Beast) you are using in yours. Rest of component will be the same. The goal are those amazing 10minutes around flight time you got there. Thanks in advance!

[@gcdevicegc6103]

I feel the short elrs/xf antenna makes twice lower signal! didn't you? what TX settings for ELRS you have on your remote?

[@JohnManning]

You do you, boo-boo. My favorite line in this video! But holy crap, I can build a drone now.

[@eyesupdroneservices]

Super helpful; thank you! Gave me some ideas for my current cinewhoop.

[@TRONCATFPV]

Glad I could help!

[@SouthBayFamily]

Great video Totally inspiring Thanks man

[@YoungWhite01]

Thanks for the video! Really informative & definitely made me decide to build me next cinewoop. Had a question.. since you’re flying acro, I’d imagine your horizon isn’t almost level when you input roll to make turns; are you using horizon lock in post stabilization to overcome that issue?

[@Brazo.officiel]

Thank you for this great video Maybe I missed something but Could you tell me what is the degree of amplitude of your camera when you fly ?

[@XD_FPV]

amazing vid.......looks great

[@whatsthefud]

This is the first drone that I am building. I used the 900mhz ELRS Nano Receiver. I am using the DJI FPV goggles. Can you give me suggestions on budget transmitters that would work with this set up? I am still learning more about the crossfire protocol and choosing a transmitter that will work.

[@bevinmore]

What makes a cinewhoop balance it self out and fly so smoothly and gracefully as compared to a freestyle 5 inch

[@federicolopez4188]

Wow amazing, i want one, thank you for the content i will come here when my drone arrive it

[@HansBaier]

Done with the build. Yes the flight is very smooth, but it makes a LOT of noise, just like the Cinebot30. It is very hard to get the batteries balanced. One set of motors seem to be always quite a bit hotter than the others.

[@OvelarFotografia]

I built similar setup just inspired by this video. It's a clever idea the use of a 6s battery with this setup. I think he is using the tiny 1303.5 motors with 2500kw just because of a weight question. They are just 6,5gr. The logic alternative to this setup would have been using a motor with around 1600-1800kv. No more of that as far as you have to multiply by 6 the kw because of the 6s battery. Problem is that those other lower kw motors are around 16,3gr each one. That is more than 40gr of extra weight to your 2.5" drone!!!. A lot!!. So I think he used the tiny 1303.5 to reduce the weight and increase around 2 and a half minutes flight time. Only problem here is overheat problem into those tiny motors... All have a price!!. Move to those little tiny motors was clever and out of the book. Kindly, other users of this setup could tell us about the overheat problem. At last I had to move to a BetaFPV low kw and 15gr motors. Maybe someone have found a solution for the heat problem!!. I would love to hear!

[@HansBaier]

@@OvelarFotografia A great motor is the DarwinFPV 1504 2300KV. Only weighs 10 gram. I just ordered it. And it's very cheap. And barely gets warm on my 4S whoop. (CineApe25)

[@guerinoantonini7634]

Dope house

[@MultiCyrrus]

newbie question here on the battery: would it handle a long range battery too (low discharge, 2,5-3000mAh?)

[@ktkt1825]

Love your work and videos- Thanks! I'm working to build one, and noticed you did not use a capacitor- is it not needed? Ps- the HGLRC Aeolus 2500KV are not available anymore- I went with T-Motors

[@ApacheSenzala]

your channel is amazing

[@TRONCATFPV]

Thank you so much!

[@quantum_m3chan1c]

Thank's so much! Are you using the GOPRO in ULTRAWIDE mode for interiors?

[@DudeMaybeSomeday]

First of all, thank you for this incredible video. As a beginner, content like this is priceless. I am going to build my first drone/cinewhoop and it seems like this is the one. You published this 6 months ago, so would you still recommend this to someone like me, or are there any things you would change after having spent quite a bit of time with it? Could you run the 03 Air Unit on this build?

[@TRONCATFPV]

This has been my go-to indoor drone since publishing the video and I love it. Only thing I’ve changed is the antenna on the back I have upgraded to a trueRC carbon fiber matchstick antenna. If you go that route let me know and I can send you the custom STL to fit that antenna. Otherwise, it’s one of my favorite drones. I’ve seen some 3D printable files that are for this frame that hold the O3 camera but I haven’t tried them out. It looks like it should fit though 🤙

[@goldfishhomebd1276]

Does this fly perfectly with full size GoPro? Are the motors got hot? & Can I lift a full size GoPro 10 in Geprc Cinebot 30 ( 1804 -6s motor) ?& Can I use 1300 6s 120c lipo(210g) in Cinebot30 setup with GoPro? Plz reply.... Btw, love your video ❤️

[@TRONCATFPV]

Even though this build can lift a full sized GoPro, I wouldn't recommend it. Drones this size really should only be flown with something like a naked GoPro. I've never flown the Cinebot30 so I can't really attest to what it can lift or what batteries are best.

[@stellarmediacollective7953]

I fly Cinebot30 with naked gopro 11 and 1100mah 6s. Works great.

[@mattmcelwrath]

Great video man! I’m gonna try these rates out and see how it goes. Another frame you may like is the droneco snapshot. I’ve been running it lately and it’s fantastic.

[@TRONCATFPV]

Thanks for the recommendation, i'll check it out! Glad the video helped 🙌

[@tbrown1352002]

Would this tune work equally well on any other build or is it best on a cinewhoop style drone only? Big thanks from a fellow New Englander for the content and advice!

[@SamuelAyinde-h2v]

What other flights controller can i use

[@SniperUSMC]

Great video and instructions! You mentioned you use an LIHV battery, which gives longer flight time than LIPO, can I have a link to it please. Current link is to LIPO. Also, please state the radio controller you line and a save charger for the batteries. Would be awesome when the NDB batteries make it to market, will be a total game changer.

[@AdamVenturesTravel]

Thanks for the build guide! I built the same drone and my rear motors are running hot.. Like too hot to touch after 1min of flight time. Only the rear motors. is this an issue I need to solve, or is this pretty common on cinewoops?

[@djiadventures1494]

@troncat Hi man, I found your work online and its amazing. Thank you for sharing this video. I do have an issue with the parts, most of the parts are not available or not in the production. Is there any substitute for theese parts!

[@sirindas1999.]

Where we get this parts?

[@TRONCATFPV]

links to everything I used in this video is in the description 👍

[@testchannel1834]

@troncat fpv Thank you for this video , I have built my own Pavo25 with the same components on your list except the AIO FC I used the Geprc 722 AIO . Had a little issues here and there with the AIO sensor position but finally resolved it . Looking to mod it to take the DJI 03 air unit but have to create a new 3d printed part to hold the camera and move it forward .

[@RaukFPV]

why that frame over a lumenier 2,5 or a cinelog 2,5? im considering changeing my protek 25 into another frame, the protek is super heavy, for what it is.

[@TRONCATFPV]

Main reason is for the ease of assembly/service, and the fact that the ducts are all one piece. Plus its a pretty solid price 🤙

[@deadmoo83]

I recently upgraded an old Beta95X to a Pavo25 for the ease of assembly.

[@deadmoo83]

@@alperenozgur All I can say for sure it is a huge improvement over the old Beta95X frame. I also have a Protek35, and I like those iFlight frames. Not really concerned about finding a better frame for that one.

[@saturn_fpv]

@@TRONCATFPV Ducts being separate was exactly the reason I got the Cinelog25. Much easier to swap if one breaks?

[@TRONCATFPV]

The pavo25 is a HUGE upgrade from the beta95x. As far as the ducts go, for me, working on the cinelog25 was never as easy as I would have hoped. Once the ducts were off the motors tend to flop all over the place and getting in the way making repairs kind of difficult. On the Pavo25 though, the duct is its own standalone piece and isnt even attached to the motors, it makes repairs much easier. Also when you think about it, the ducts on the cinelog require 16 screws to remove while the pavo is 6. When comparing durability, I feel the pavo takes the cake. It is nice that the ducts are individual on the cinelog because they are thinner and will break easily in a crash. the pavo duct is pretty thick and since its one piece it feels much more sturdy and durable. Where the cinelog takes the cake is with the camera dampening. I really don't know why betafpv eliminated that on the pavo25 design.

[@ScottyRoddis]

I just did a build video on the QAV 2.5. Might have to give this one a shot. Nice clean build man.

[@TRONCATFPV]

QAV micro frame is very solid 🤙

[@JohnMarkadakis-c2m]

Looking for some advice on motors / battery combo for this build. Are my 1404/2750kv motors and 6s 550mah a decent combination for this frame or is my motor KV too high?

[@27studioperu]

thanks for your answer friend, I hope you can help me, I have a cinelog 25, I was with "crossfire" and the flight throughout my house was perfect, but I switched to ELRS 2.4 (500w) and strangely I lose video signal " , only in the glasses, when I pass 2 rooms, but the radio control is all right, I only lose the video signal, I changed the antenna to the caddex and it improved a little, but the video signal is still very weak.

[@TRONCATFPV]

Is it an analog or digital setup? Also is this only happening when you have 500w on for ELRS?

[@househub_media]

Awesome video was thinking of buying an Ágata but now I want to build my own. How do you mount the go pro on it?

[@Drone_Addict_]

Do you offer 25 minute consultation phone calls for troubleshooting issues that new FPV pilot may be going through. Or even a video phone call. I’ll be willing to get behind something like that. If you offer it please let me know. I’m having a lot of issues as far as getting by Drone to come off the ground. It is mostly having to do with a binding issue between my radio, master boxer, and express LRS receivers. I for some reason cannot get my drone to communicate properly. Please and thank you for everything you do. I followed the tutorial of reckon 7 inch build that you did. Mine did not come out as amazing as yours did only because Banggood screwed me on parts but I may do with what I had my crossfire module came in yesterday, so I’m hoping maybe I can get it off the ground now, but I’m still having issues on other quads. Again, thank you for everything that you do.

[@kevinglenister6520]

This may sound like a very dumb question, but the way your props are on your drone it should not fly if your motor direction is pulling in (motor 2 and three counter clockwise, motor 1 and 4 clockwise). I listen to you set the motors several times and you said they were going in the reverse of what I stated above so you reversed all of them to make it "normal" .. But your props in video do not indicate that.. Or have I missed something..... Your input would be so helpful, I suspect it is me as this is only my 3rd drone build. Thanks love your videos. PS i got my drone to fly great but my props are opposite of yours.... Confused :)

[@jhomer145]

Now I want to buy this house just to have a great place to fly my cinewhoops !

[@stevejakab]

Great vid. I also wanted to ask, what would be better out of the iFlight Beast STD F7 45A AIO (MPU6000) vs the iFlight Beast H7 V2 55A AIO Flight Controller?

[@deltaadventuregear]

Outstanding!

[@iCrazy414]

Is there another motor you’d recommend? The HGLRC 2500kv are all sold out no matter where I look 😢

[@Lift33d]

Hey man I have the new betaflight and can’t find that tune .. is there a way I can just copy what’s in your screen or where do you recommend I get the files I need from maybe Betaflight Discord?

[@VideoworxSweden]

Great video! Curious if you use the built in stabilisation in the GoPro and what camera settings you use in general. Looks like you are powering the GoPro directly from the drone and not from the balancing connector, how do you do this?

[@VideoworxSweden]

I just saw your other video regarding powering of the GoPro. Great stuff! When taking power directly from the quad, have you been using the full LiPo voltage or 5V? Just wondering if powering the GoPro (Hero 8 naked in my case) with 6S could cause problems? Thanks again!

[@Braincho]

Hello from 2024! Does this build is still viable or something else is better now days(may be a half inch up or down in size or same)? How would it flies outdoors for those cinematic shots or you would suggest different one for outdoors? Thank you in advance!

[@neilfpv]

Amazing build video, always! What are your thoughts on 1303 vs 1404 motors? Why did you pick 1303?

[@TRONCATFPV]

thanks! I was initially planning on using a set of 1404 Toka motors but they are 12x12. and dont fit the frame (pavo25 requires 9x9 only) and theres not alot of options out there in 9x9. I saw the 1303.5's and saw they had a nice low KV that I was looking for and figured I'd try em out. Plus I have aeolus motors on my cinelog and love em. They've been holding up awesome and perform great!

[@neilfpv]

@@TRONCATFPV Thank you so much for sharing your thoughts about it. :)

[@DevonSpittleREAL]

Well done 👍🏻. Do you ever adjust your throttle limits? And is your camera angle really low? Thanks!

[@TRONCATFPV]

It really depends on the build, for this one I didn't have to but you can to help with throttle blips

[@saturn_fpv]

I was so sure he uses throttle limit or expo to combat wavy lines, surprised he doesn't!

[@thatramenguy3395]

Your videos are always helpful and to the point. Thank you for that!!!! I have two questions. Why do you prefer a 2.5 over a 3 inch? My next question, do you use Horizon lock on your GoPro?

[@kevinhirsch5544]

I only have got a TBS Tango 2 radio, so I wanted to ask if I could also use any Crossfire receiver instead of your ERLS or would Crossfire not be compatible with the flight controller? If yes, how do I know which receiver have got good penetration and which ones not?

[@gimbalair]

Awesome video very easy to follow, I carried out simple repairs on my cinelog25, pretty good at soldering I'm sure I could build this, but I fly DJI so would need the SBUS, is the BF file the same if I go that way>

[@LockJawFPV]

Very nice brother I have a foxeer 25 and a cinebot30 what's that impact pen you have who's the manufacturer I likes that have to get me one appreciate the awesome content

[@inmaniac]

You don't use any expo on throttle? What black magic do you use to keep it so flat? :o Maybe the weight helps you? I use a Cinelog20 with the same tune and have trouble keeping it level.

[@CaseyRodriguez-xb3jn]

Would you reccomend this over your qav nano build?

[@FreshPanda97]

thanks mate, what about thorttle expo, throttle limit and throttle mid? Many people swear by it I just dont have any clue where to start with the throttle tuning

[@SniperUSMC]

Forgot to ask about FPV Goggle's, anything but DJI proprietary stuff would be nice, which ones do you use that works with this drone?

[@carlosbetancurt1920]

I just bought some parts to start mine couse my cinelog25 bubbling a lot I need something stable. Thank you nice vide.

[@martinshaw6907]

I have become a patron to your channel have ordered parts to build your projects absolutely thrilled and look forward to sending my results when finished the only problem I struggle with is the software you need so would appreciate help with this and how you connect drone to computer building and electronics I am good with computers I am not 😅

[@fokusfpv]

@Troncat - what are your thoughts on the pavo 25 v2 vs. the original used in this build. they say the new ducts give more thrust, so I'm not sure if that's an advantage or disadvantage for real estate.

[@walasfilms]

No expo for indoor flight? I tought I was supposed to increase that

[@mathewl7427]

Do you find it hard when you transition outdoors with those low rates?

[@TRONCATFPV]

I rarely have issues with it. The only time its difficult to transition is when its windy out, but then again its difficult with higher rates as well haha

[@HuntAndFishExchange]

I think I’m doing something wrong with the motor direction- can you give more detail on the motor layout & motor spin

[@itsonlystuff]

Hi mate, I've been buying the parts to build this but the HGLRC Aeolus motors arnt in stock anywhere! (I'm in NZ so makes it harder). Any recomendations of similar motors that might work for me? Thanks!

[@zenandtheartofskateboarding]

I gotta ask or it'll drive me insane, when I tried this build the motors overheated like crazy until one blew up, I know the motors claim to work w 6s but google and forums say their kv is too high for 6s, is there something I missed that would've made them actually work w a 6s battery?

[@carlosbetancurt1920]

I just finished my drone, but I'm having trouble. When I go through a hallway the drone starts vibrating a lot it's like a turbulence I just checked everything and it looks good.

[@krisgleave]

Hi, the parts are difficult to get for this. If I were to use the new Speedybee F7 AIO and look for some other motors with a similar size and KV do you think I’d be able to achieve similar results? I don’t tune quads as no experience with that. I just want it for slow flying indoors like yours. What I want is an indoor drone, ideally with O3 as that’s what I always fly but be able to hold a GoPro Mini 11 and ideally around 8-10 mins flight time. Would you still recommend this build and with the tweaks I mentioned above what do you recommend think would work or not work?

[@riosyahid7418]

Thank you so much for your video...

[@juanjones7121]

Great vid. Just wondering if this build can sustain the O3 air unit?

[@TRONCATFPV]

you'll likely need an alternative camera mount for the O3, the rest should fit no problem

[@tomaszboril]

Oh man that much low rates? And I was wondering why I am so stressed using the regular 530 rates from 5inch with bit more expo :D You are right about the freestyle stuff so gonna tweak and probably just make a switch between the full and indoor rates. Thank you for tip!

[@TRONCATFPV]

haha yes, very low rates. otherwise the drone can bobble alot when flying indoors. Glad the video helped ya! 🤙

[@tomaszboril]

@@TRONCATFPV Gave them a try and definitelly "safer" to fly slow. One thing I noticed is in those situation I mostly just "punch" the stick a bit and center back. Increasing the sensitivity now so the effect of punch is faster. Thanks again, somehow never thought of going this low with rates 🥂

[@whitewingsfpv]

Why do you use a 55A flight controller? What happens if I put a 45A or 35A flight controller in your configuration? The current consumption of your motors does not exceed 10A. Please explain the purpose of installing a more powerful ESC?

[@deadwater87]

Is wiring a GoPro bones ok to go straight to the battery leads? 8:52

[@TRONCATFPV]

That should be fine since the bones accepts up to 27v. 6s battery source will supply 25.2v 👍

[@deadwater87]

@@TRONCATFPV hell yeah ! I’m tired of losing my balance connectors 😂

[@HansBaier]

Would you recommend this build over the Geprc CineLog 35 V2? What advantages would it have?

[@BraveSirSausage]

this is great - Im looking for something like this but for filming outdoor big ramp riders in a skatepark, would a build like this be suitable ?

[@jeanmosquea9539]

What goggles would I need to get fot this (beginner here) and how does this compare to a stock version?

[@gabinofpv]

i cannot find those motors anywhere in stock! is there some similar motors you can recommend? i already ordered everything but motors lol