Building My 4v 4.6L Engine In 8 minutes

Building My 4v 4 6L Engine In 8 minutes
Donate To My KZbin Channel!
www.paypal.com/paypalme/Drift...
Facebook
/ driftdreams242
Instagram
/ driftdreams242
TikTok
www.tiktok.com/@driftdreams24...

[@Motor-City-Mike]

Amphetamines are bad for your heart Drift, but a four valve in eight minutes rocks! Cool vid, thanks!

[@Motor-City-Mike]

@@DriftDreams242 amen!

[@qsysopr21]

Hi Friend, thanks for a quick video. I was wondering if you could make a video on how to set the timing on this kind of motors. I have a lincoln aviator 2004 with the 4.6L 16v and mechanic is not able to set the timing. Thanks in advance.

[@henrydawson6960]

Why wouldn't you just use all c-head cams in this build? if one of the b-head cams are broken just switch it all to c-head!?!

[@jntcustomcars]

Looking good. Keep them coming. We would like to see how you did your electronics when you fired it up last time on the ground.That would be a great video. The time laps was good. Peace my friend.

[@fordchevinman4614]

Good video

[@southshore8911]

beautiful job, but I am a 70s 351 Cleveland and 302 Form motor man , i don't like the Ford 4.6 and other overhead cam engines with chains and sprockets all over the engine , I will stick with the 351 Cleveland 1970s block extremely simple build and NO chains or sprockets all over and plastic chain guards

[@deseanstrickland9122]

That's nice 👍

[@jaye23able]

great job bro

[@bobbydouglas16]

makes me think I should of done mine myself instead of taking it to a machine shop, good video :) Also, why would the compression be bad if you just rebuilt it?

[@scottskipper1823]

good job bud

[@zavaej]

When you do main studs do you have to machine the block?

[@svtcolten7439]

Do you have a step by step book or anything you recommend me using? This isn’t a 302w, so I’m more nervous getting everything right. I have a 5.4 4v with custom ground cams and adjustable primary and secondary sprockets. That I need to finish building, it’s currently just the short block, just need to throw on heads and cams then time it.

[@svtcolten7439]

@@DriftDreams242yeah I have the rebuild book for mod motors. Thanks for the reply

[@Photog455]

I found this video very interesting as this is what is happening with my ,04 Mercury Marauder 4.6 DOHC motor as a piece of the timing chain guide broke, went into the oil pan and got sucked into the pickup tube robbing the engine of oil pressure. The damage, I was told, occurred quickly. The car is 21 years old with 217K on the motor and was performing fine until this.

[@DriftDreams242]

Hey man trust me that problem is more common than you might think, here's my video on explaining what actually happens and how I fixed the problem, kzbin.info/www/bejne/bZWnYqt-gsylj7ssi=o-h4idfCwW701pBA

[@Photog455]

@@DriftDreams242 I'm having the work done by a gentleman who's been building racing engines for 38 years so I trust him to do the job right. Expensive but right.

[@DriftDreams242]

@@Photog455 yeah that's kinda how it is, lol 😂

[@stevensgarage6451]

My aviator did that horrible chain rattle for a couple mins most cold starts until oil pressure built up or you revved to 2kish. Never realized the broken guide might block the pickup.

[@DriftDreams242]

@@stevensgarage6451 oh yeah man it's a real common issue with these motors

[@bstfordchannel923]

Just seen this video GREAT VIDEO!. I know about the work ting bro.. Its hard thing to do, but APR Studs aint cheap! so yo need to work to make it happen... Its rough here in the states on my end... I have to shout you out on the next video and a few other people

[@bstfordchannel923]

@@DriftDreams242 that cool way to spend the money... You just have to make all worth it... Thats the hard part when you work and trying to make THIS happen...

[@flosgarage23]

I bought heads separate from the block doing a build and the guy threw the cam caps in a bag and didn’t label them. Was wondering which ones went where

[@metalmassacre84]

If you just hone the piston bores, do you need new piston rings? Do you have a parts list that you used?

[@metalmassacre84]

@@DriftDreams242 i dont mind replacing them, is that pretty standard w a hone job tho? Same old pistons with new rings? Thanks

[@tacosontherun]

Man I just blew a head gasket in my 96 mk8 thinking about swapping to c heads Im hoping to learn as much as I possibly can before the swap I’m a very visual learner do would a Cobra workshop manual have everything I need to complete this process I have some knowledge and I want this mark 8 as my first project car but I know that’s kind of bold with these engines

[@tacosontherun]

@@DriftDreams242 well i was watching this video made me want to drop forged crank pistons and rods so it can bolt to an Eaton m112 that’s why I originally wanted to swap to c heads I’ve heard good things about these gen 1 manifolds with the delete and a cobra throttle but if I’m gonna tear in that far I might as well put in what i can in the rotating assembly

[@GoProTony912]

​@DriftDreams 242 how much would something like this cost? 🤔 I have a 93' Crown Vic & I'm looking to rebuild the top end & add a little more power

[@santinocappellaro7468]

Great job on the rebuild of the 4.6 4 valve motor I was curious I have a 2004 Lincoln aviator with a Mach 1 motor in it and I was just wondering how much it would cost to go through an engine rebuild and supercharge it with high performance parts if you would know off-hand how much it would cost to rebuild a 4.6 4 valve motor I really appreciate that looking to make around 600 to 700 horsepower on this Lincoln aviator which weighs about 5,000 pounds it already has 373 gears which is a plus thank you for your response

[@jntcustomcars]

6 to 7 hundred hp will be in the 10 to 15g range for a 4v motor. If you want it to stay together for long haul. Your going to be boosting of some sort to make that kind of power.

[@santinocappellaro7468]

@@jntcustomcars thank you very much for your response also would probably be a good time for me to have the trans rebuilt while the motor is out motor and trans only has 93,000 original miles on it thanks again

[@ShawnVerdun]

re building a 4.6L engine what i'm looking at

[@nandansho]

Do you know a good shop that can build my 4.6 4v in the Southwest?

[@DriftDreams242]

Unfortunately I don't, I live in the Bahamas,

[@dsauce8780]

Didn’t degree it? Leaving power on the taaablllee.

[@427Cabriolet]

Hey man, i wanted to know that how much can the stock 4.6 block handle before the internal blow up.

[@madeulook5872]

400ish

[@kingssuck06]

Usually its the torque. There are a lot of 3v mustangs with turbos that see over 500whp but the rwtq is around 400. Lower rwtq and 6000rpm limit will make it last longer

[@selfshack2061]

my piston chipped off and cracked at 450 whp

[@GoProTony912]

I have a 4.6l 2V engine, im looking to have it rebuilt (it was pinging). I understand that pinging is bad on the motor, so id like to atleast have it taken apart & looked over & have any needed parts replaced! Im also looking to add a little more power to it, maybe Heads, Cam, Manifold & bigger Throttle Body. Can you give me a ballpark estimate on the work?

[@GoProTony912]

@@DriftDreams242 Yes, I feel confident in your work

[@GoProTony912]

@@DriftDreams242 oh wow!!! 😫🤣 Dang brotha! You're welcome though! You're doing a good job! Keep it up 😎

[@GoProTony912]

@@DriftDreams242 You're welcome bro ✊🏾 No problem!

[@pgc_lyfestyle9384]

Teach me how to do that I wanna learn

[@BigDrew668]

Didnt know ice cube can rebuild engines

[@DriftDreams242]

The pain! 🌴🤣🤣🤣🌴

[@calebwood3651]

Anyone know the torque specs on all of these bolts?

[@DriftDreams242]

Uuggguuhhh ggguuuggguuuhh on the impact 🤣🤣🤣, sorry man I don't know the specs lol

[@calebwood3651]

@@DriftDreams242 No problem thanks for responding.

[@DriftDreams242]

@@calebwood3651 no problem at all man, anytime.

[@pabloescalante7536]

Can you build mine ? It’ll only take 8 minutes bro

[@ricklodestein1101]

16 minutes with tear down. Lol Don't you all wish we could build an engine in 8 minutes?