Building the Round 2 Space: 1999 Eagle Part 1

This video is part 1 detailing my build of Round2's Space: 1999 22" model of the Eagle. This part focuses on the the cockpit and command module.

[@zachkatsihtis4152]

Perhaps one of the best looking spaceships ever developed for a tv show.

[@InterstellarModeler]

@@zachkatsihtis4152 totally agree. I absolutely love the Eagle

[@rsprockets7846]

Also the most engineered and modular craft ever designed

[@InterstellarModeler]

absolutely

[@nicholasdickens2801]

I adore the Eagle Transporter, it is truly an iconic design. Well thought out and truly cool.

[@mariosmanesis5644]

i got this one today & it looks more than great

[@InterstellarModeler]

its such a fun kit

[@negotiableaffections]

You made great work out of those window 'add-ons' and the helmet visors was inspired. That illuminated cockpit, fills me with nostalgia. Great work!

[@InterstellarModeler]

Thank you Keith. This model is a 1999 fan's dream come true. When completed it really comes out to be a very nice replica of the ship. Thank you for watching

[@mikeg1174]

Grew up with Space: 1999 and even built some Eagle model, also a Moonbase Alpha, when I was much younger. The Command Module turned out very well.

[@InterstellarModeler]

thanks for watching

[@DESooner333]

Wow. I'm not a big sci-fi fan, or not yet anyway, but I was blown away with your work on the cockpit and command module. Also impressed with the astronaut detailing and the use of translucent paint - very good. When you mask something off, you really mask it off. I wish everyone had your patience. Very good work. And you are right - growing up in the 70s, we all would have thought our space program would have been farther along than it is - should almost be criminal that it isn't. Thank you.

[@InterstellarModeler]

Thank you for all your nice comments.

[@Realmasterorder]

Very nice i must say the Eagle is definately one if not THE Best and coolest model made for any sci fi series

[@InterstellarModeler]

Totally agree, thanks for watching

[@Rabblewitz]

Enjoying watching the built. Two things. Since the figures are a little harder to see in the cockpit, a quick wash (not black) would probably have been enough to make them pop. Regarding the LEDs, the size of the LED does not dictate the battery used ... the color (different forward voltages) and the resistor (which should be included, based on where you are getting them) is what determines the battery to use. I rarely use the 9V batteries because of their size and they don't last as long as other type batteries. Granted, just powering an LED or three means the battery still should last for quite a while.

[@InterstellarModeler]

What kind of battery do you typically use?

[@Rabblewitz]

@@InterstellarModeler Depend on the space available. Typically I shoot for a couple coin batteries (I want a minimum of at least 3V), and I've used some small ones meant for cameras at around 12V. The latter are more expensive than a 9V transistor battery, which is hard to beat for the cost, but smaller ones often fit the space better. I've also used a couple AAA batteries. I sent an email with some info.

[@PanzermansBunker]

Good update. The Eagle cockpit turned out great. Love the paint work on the pilot figures. Keep having fun. Bill.

[@telboy1965]

Have just got this model and viewed part one of your build outstanding work sir 👍

[@goldenscales]

The Americans didn't know it at first, but the first prototype of the Millenium Falcon was based on this ship! When the Brits complained, a new ship was designed, ultimately becoming the Falcon!

[@frac]

The name is a dead give away. Millenium (1999) Falcon (Eagle).

[@toddmichaeljaniszewski]

Love! Thanks for some of the tips. I've been working on mine for weeks and am getting ready to do the black on the cockpit.

[@cy2087]

Really outstanding work IM. Came out looking just like a scene off the old tv screen. Gerry and Sylvia Anderson would have hired you in a heartbeat man. Thanks for posting this up.

[@InterstellarModeler]

Thanks for your kind comments.

[@jimolygriff]

Forgive the late comment, just found this. Am amazed that an American guy has the patience and love for a ship I adored when I was so very young! Good job, sir. Subbed, definitely!

[@InterstellarModeler]

Lol...well there are a few of us around with patience. Many of us sci-fi fans who grew up in the 70's loved watching the show and you'll find a pretty good, loyal following of the series here in the states too. One of those fans in fact was key into bringing this kit onto the market. The ship is one of my favorites and loved the fact that they came out with such a detailed model kit. Thanks again for watching.

[@Cabilis66]

I love it mate ! Looks fantastic so far, I can't wait to see the rest of the build.

[@joelb2297]

Love this! Eagle Transporter was the most profoundly kewl space vessel of any sci-fi series, ever!

[@TheMoulie]

Seriously miffed. I had my pre order at Forbidden Planet all ready for their March 31st release day. Got an email yesterday saying delivery delayed until sometime in late May...grrrr.....very jelly of people that have it!

[@InterstellarModeler]

+TheMoulie So sorry to hear that. If it's any consolation, they apparently fixed a few things with the later releases. Minor details but no doubt helpful. For example there are some tabs they added to the back of the CM to make it easier to remove and detach the cone the cone to the back wall. This is nice so that you can actually display the interior detailing when desired. Hang in there. I'm sure it will be along soon. Thanks for watching.

[@TheMoulie]

+Interstellar Modeler Your vids can keep me going in the mean time! Still jealous though :)

[@hobbyhermit66]

Kool model. An easy way to diffuse the LED light is to apply a ball of clear, hot glue. Just squirt it on, and shape it with the glue gun.

[@InterstellarModeler]

I've been told that hot glue could potentially damage the LED, have you ever had problems with this?

[@hobbyhermit66]

Interstellar Modeler , I've never had a problem with it. As when soldering, don't keep the heat on the LED for too long. Also, you can use the low temp glue.

[@Kens_Model_Shop]

the cockpit and command module Awesome work very cool like the lighting the cockpit you can use sandpaper on the LED to diffuse the lighting looking forward to your next post on this build Have a Great Day.

[@diggydude5229]

Or just buy a diffused LED.

[@AlexModeling]

even better than the original cockpit!! looks awsome!

[@maxiegrobner9018]

Just got the model going to incorporate it into a 4'x8' diorama. I've decided to cover up the bottom windows as they seem to be there just for design porpoises. Not sure what to do with the bottom thrusters as they really wouldn't be attached to the pod. Might put them fore and aft. Also the landing gear lights would face forward not down I think. Will also add port and starboard lights for and aft, top and bottom.

[@alphacompany6741]

Excellent work and tutorial, thanks for sharing!

[@stompingfreak8980]

Love this. Really enjoy your videos. Would you consider showing a full build(I.e filing, glue, perp for paint etc), not just updates after work has been done. Thanks for doing these videos.

[@InterstellarModeler]

+Stomping Freak Will give it a shot. Thanks.

[@theagileaardvark]

Instead of installing the translucent styrene sheet in front of the LED you can alternatively sand the clear "front lens" portion of the LED itself. Gives various amounts of diffusion based on grit of paper used. For even more diffusion (and further light intensity loss, of course. Everything comes at a price, right? :D) you can then paint the sanded LED in a semi-opaque (or do a thin airbrush coat of opaque paint of) colour of your liking.

[@InterstellarModeler]

+the agile aardvark Yes that is very true.....something I didn't even consider when puttying this together. Thanks

[@richardb.8467]

Thanks, im ready to start my eagle now.

[@chichiboypumpi]

I was a six-year old watching this show on a 14-inch black and white tv

[@watchth1ngs]

Damn you're good.. I watch these videos with total admiration but also knowing I'll NEVER be able to get it as absolutely right as you do. [sigh]. But please keep posting.

[@InterstellarModeler]

+watchth1ngs Thanks...will do

[@wakemanedwards3450]

Good modeler, smart with what to buy and whats just crazy out of the ballpark. Thats one of the things I like about your channel. Good advice. I mean, who is going to know after a metalizer that you didn't buy to overpriced engine bells?

[@dalethelander3781]

Good schtuff! At least you put some forethought into the lighting, unlike somebody we both know who decided to light it at the last minute.

[@nmore69]

Excellent

[@MONTY-YTNOM]

It's Micro Sol for getting the decals to shrink in place. Micro Set is to put on the decal when it's dry before soaking it off the paper. I always got it the wrong way round as well. The names are a bit confusing.

[@InterstellarModeler]

+Montague Flange You're absolutely right. Thanks for the correction. Overall these decals aren't very hard to work with. I will make sure I correct that in my next video. Thanks for watching

[@petevenuti7355]

Are there any CAD designs, 3D scans or other online resources showing the dimensions / proportions of any of the models or even original props?

[@InterstellarModeler]

I’m not sure but i would check on the Space 1999 Props and Ships Facebook page. The administrators are pretty well informed about stuff like that. Thanks watching

[@johnblack9885]

Did you decant the Duplicolor Oxford White or did you just spray it from the can?

[@InterstellarModeler]

No just straight from the can

[@MONTY-YTNOM]

Nice video. very clear and helpful.

[@InterstellarModeler]

+Montague Flange Thanks

[@federationshipyard4073]

Very nice looking great.

[@preppertodd]

With the 3d printer, im suprized no one has made the files for a orignral size Eagle from the 70s. would be cool to print your own.

[@InterstellarModeler]

Actually there are quite a few out there now although I’ve not tried any. I have 4 Eagles in my collection so no room for anymore. Cgtrader is one sight that you can get 3D files for the eagle. Thanks for watching 😊

[@preppertodd]

@@InterstellarModeler Man you are lucky. U know the bad thing, back in the 70s I got 2 of them for my Brithday one came from my Mom and one came from my Moms friend. Gosh i wish when i went off to collage mom did not sell them in her gradge sale. I would love to have them sitting in my house in display cases..

[@preppertodd]

@@InterstellarModeler I foergot to ask what was the 1976 Scale do you remember. (the orignral first one on the market)

[@richardb.8467]

good idea, thanks !

[@DaveJOHAZ]

Hi, Interstellar Modeler! The build looks great so far. The time watching actually flew by. But I have a question about the kit itself. Do you have any idea why they didn't make the seats for the astronauts to sit in instead of mounting them to the back wall? The astronauts also wore harnesses that they could have just molded into the suits, right? Do you think it was too much detail that no one would notice? Thanks and keep up the great work and videos!

[@InterstellarModeler]

I think it's because there's really very little room to begin with and when assembled you hardly can see any of the interior detailing. Interestingly, the studio model had no seats either and the astronauts were mounted just like they are here. Thanks for your kind comments. Am currently building another Eagle which will feature additional lighting. I plan to post that video very soon.

[@redshirtforever1977]

Excellent start on the build. I like the way you are trying to keep it screen accurate. What kind of base are you planning to display it on when your finished?

[@InterstellarModeler]

+Red Shirt Forever Thanks. Have not really planned on a stand. This model is so big, it really makes a nice display on its own.

[@redshirtforever1977]

Fair enough, I'm looking forward to seeing your updates and the finished Eagle

[@wrathofatlantis2316]

Judging from a spacewalk near the landing pods, by Allan in year one, this kit is dead-on correct for 1/48th scale: The basic original design has the main side doors at 5.5 feet with no obvious constraint, likely a minor design error on the original...

[@0623kaboom]

gee in my day decals softened nicely in warm water and would conform to any shape when soaked properly ... no extra chemical crap required

[@vincedent172]

What is the glue dispenser you are using please?

[@InterstellarModeler]

I believe you're referring to the Testor's Plastic Cement.

[@ScottFromCanada]

That looks really great! One thing I didn't see (maybe I missed it), did you paint the exterior of the model white before starting all the other work or do you do that last? Also do you prime the whole thing first, then do the final coat of white? Thanks!

[@InterstellarModeler]

Scott Rogers hi Scott. The model was primed with a light gray filler primer from Duplicolor. Any seams were filled in, reapplied primer before painting with the final color. Some people assemble as much as they can before priming at all. I just find it easier to prime with model unassembled to get more even coats. Just a habit (good or bad).

[@richardb.8467]

Very nice !!! I will build mine soon. I'm not sure of what you did on the windows in the bottom, did you put double frames ? thanks !! Richard

[@InterstellarModeler]

+Richard Bourdeau Hi Richard...thanks for watching. Yes I used frames on the bottom and top. The little kit comes with painting masks that can be used for the bottom but I decided just to use frames on both upper and lower for a consistent look.

[@richardb.8467]

Great and good idea. Thanks

[@mcsdaver]

I am building the same Eagle!

[@emiliogreenwood8190]

Where can you get this model

[@InterstellarModeler]

Try culttvman.com. I believe they’re still available

[@smokeydoke100]

Beautiful modeling work, but that wire looked pretty heavy duty for just one LED. Try using doorbell or thermostat wire. Less bulk and weight, and more pliable.

[@InterstellarModeler]

Maxwell Edison....agreed. If I were doing this today I would utilize a large SMD with thin wire. Thanks for watching and appreciate the compliment.

[@felixrodrigues3861]

in all of the eagle videos i see no one asks how long and wide is the eagle???? can you please give that information. thank you

[@InterstellarModeler]

Hi Felix....when completed this 1/48 scale kit measures 22 inches in length, about 9 inches in width (from one landing gear pod to the other), 4 inch height give or take depending on the springs used for the landing gear. Thanks for watching

[@richardb.8467]

hi, i did a mistake, i forgot to mask the 2 window frame in the bottom, they are completely black ! what i can do to paint them white, if it is possible, any idea ?thanks

[@InterstellarModeler]

That's a tough one. I would say the easiest thing to do is order another set, since their so inexpensive. Then remove and replace them.

[@richardb.8467]

what kind of primer you used? thanks for sharing your experience!

[@InterstellarModeler]

+Richard Bourdeau Duplicolor's Gray Filler. It's a very light shade of gray.

[@skulleader]

Hello dear Sir, please can you give le the name of the paint primer grey that you have using for your Eagle ? In advance a great thanks again, Olivier.

[@InterstellarModeler]

No problem, Duplicolor Gray Filler Primer.

[@richardb.8467]

Hi, you d'idnt talk about Windows clear parts, did you install these or stay open.? thanks

[@InterstellarModeler]

+Richard Bourdeau I left them open up until the very end but I did use the clear plastic parts that came with the kit. If I were to do this again, I would do the exterior gray paneling first before installing the windows and attaching the astronauts / back wall. I used pastels for the paneling as you'll see in upcoming part 4 and it would easier to spray the dull coat without the windows in place.

[@richardb.8467]

Ok. Im looking forward for part 4 !!! Thanks

[@saudsaud11]

Can you please tell me the link to buy this model ???

[@InterstellarModeler]

culttvman.com is one among many online. The model is still available as of today 01/2019

[@bogusmogus9551]

Never figured out why the windows etc was copied underneath the nose cone. Were they able to turn upside down in their cockpits to see out of the lower windows?

[@InterstellarModeler]

As with most sci-fi ships the exterior never matches the interior and this becomes very apparent when building the model. I think there is no practical reason for them being there other than aesthetics....in other words...it looks cool :) It's definitely one of my favorite sci-fi ships for sure. Thanks for watching.

[@bogusmogus9551]

Thanks for the reply, I have to say though, the Eagle is the most credible spacecraft design in sci-fi. ie, if you built a real life size one, it would work.

[@InterstellarModeler]

You're welcome. It really is an ingenious design. It's an icon.

[@francisdhomer5910]

I have always believed the reason for the lower windows is the same as some helicopters with lower windows. The Eagle will be landing and the pilot needs to see what is underneath.

[@blackwolf_armory7990]

Were did you get the kit from

[@InterstellarModeler]

Cultvman.com

[@fjenkins8129]

How can I get in touch with you, I am looking for a missing part on an Apollo kit? Thanks

[@InterstellarModeler]

sure....interstellarmodeler@gmail

[@skulleader]

Hello dear Sir, Please can you give me the references and names of the paints that you have used for the rear board and for the pilots ? At 8:015 for the rear board and 5:13 for the two pilots, please can you give me these references ? Once again a great thanks for your assistance and for your sharing. Olivier

[@InterstellarModeler]

Hi Oliver. The paint used for the back wall is a craft paint by Folk Art the color is called Linen (420). I used Testors International Orange (mixed with a very small amount of Chrome Yellow) for the suits. I don't remember how much. I would just mix a little of it and see if the color suits you. International Orange would be OK but it just looked a little too red for me. Hope that helps. Feel free to ask more questions anytime. Glad to help.

[@skulleader]

Hello, once again I really appreciate your answer and explanations it's always really so precious. Thanks for all, Olivier ;-)

[@owenauer3406]

What scale is it?

[@InterstellarModeler]

1/48

[@rbuschy]

Lolz, didn't know this show existed, never heard of it! Odd since I was into all the old Sci-Fi.

[@InterstellarModeler]

Really? Wel....if you do like old Sci-fi I'd check it out although it's not available for streaming on Netflix or Amazon. You can still purchase it on DVDs or find used ones on Ebay. I've seen some episodes on KZbin too. Thanks for watching

[@rbuschy]

I did a quick view of episode 4 on KZbin before I made my comment. Just saw that episode one is on there too. Will check it out for sure. My first thoughts were that they sure had high hopes for the near future in the 70's!

[@InterstellarModeler]

Lol...yeah. I was born in the 60's, grew up in the 70's and when you were watching the space program in full swing, it was easy to be optimistic. Never thought we'd have anything like eagles but I was hoping we'd be more ahead than we are now. We can still dream I suppose. :)

[@rsprockets7846]

Built thee of them in 75.

[@InterstellarModeler]

very cool

[@rsprockets7846]

@@InterstellarModeler the mpc ones along with a talcum powder and paper mache base. Got trashed in the flood in of course aug. 1999

[@timlipinski2571]

Time for an upgrade. Boeing just released its Boeing Blue Boeing Space Suit. ( www.boeing.com or www.nasa.gov ). And did you put in a Red LED in the cockpit for night ops ! This looks like an early version of the NASA design of the "24-Hour Lunar Shuttle" (LEO to LLO) to operate in the deep gravity wells of the Earth, the Moon or Mars ! Thank you for the video ! tjl

[@skulleader]

Hello dear Sir, once again I have a little question but this time it's about the glue. Before to start my Eagle I would like to know if this glue is good for the Eagle, "Liquid Cement for Plastic 8872C" link: www.testors.com/product-catalog/testors-brands/model-master/adhesives/adhesives In advance a great thanks, Olivier

[@InterstellarModeler]

Hi Oliver...yes this will work just fine. I would also have some super glue on hand and some of the Tamiya fine glue as alternatives. Sometimes you may find superglue handy especially when you want certain pieces to set quickly. For superglue I use Gorilla brand gel. Most of the time, however, I used Testors cement. Have a good one and if you ever want to email me, feel free to send to interstellarmodeler @ Gmail.

[@WarlockCore]

nice model, however the cockpit interior is inaccurate, the seats are set way up high, when in the show the pilots actually had to step down into the seats, I'm actually altering mine to adjust the position of the pilots, everything else on the kit looks pretty accurate. yep I'm picky, lol

[@WarlockCore]

ps I would like to purchase those frames, but I don't do Facebook, is there another place I can order that which you know of?

[@InterstellarModeler]

Thanks. Would like to see what yours looks like when done. The Eagle miniature and the filming set were not a 1 for 1 match, as with most scifi ships in TV shows. If you look at the filming miniature, the pilots are set just like they are in this kit.....but would love to see what you do to make it look different. Thanks for watching.

[@InterstellarModeler]

I'm not aware of any. The ordering was done via messaging and paypal on Facebook. I certainly respect that FBook is not for everyone but I'd recommend setting up an account and joining the Space 1999 Props and Ships page at least for this build. There are a lot of helpful hints and advice from other builders you might find helpful. He is still selling them too. Hope that helps.

[@WarlockCore]

+Interstellar Modeler hey thanks for responding, you do very nice work, yep I'm aware the sets and models have differences but as mentioned I'm picky, lol . also working on doing an interior for the cargo pod, as for Facebook I do not trust fb so kinda keep away from those social sites, cancelled my page waaay back in the early days, going to give a shot at creating parts for the kit via 3d printer, see how that goes, anyhow thanks for replying ):)

[@InterstellarModeler]

Thanks. Sounds cool. Would love to see what your stuff looks like when completed. As for FBook...completely understand. I just realized I have his email because of Paypal. If you email me at interstellar@gmail I'll provide you with it.

[@user-cp4hz4ew4k]

The nose of the cockpit makes no sense. Looking out the right window the pilot can't see to the left. Looking out the left window the other pilot can't see to the right The cockpit windows are flat which limits forward view.

[@InterstellarModeler]

Yes....it's very impractical in that sense but nonetheless a cool looking ship

[@revvy1968]

I found your video on the build very informative, although a bit hard to follow visually. Scrolling over the diagrams/blueprints at side angles and scrolling in all angles gave me nausea . I recommend , if I may, stick with up,down,left,right. Thank you

[@InterstellarModeler]

Carlos Arevalo Morgan sorry about all the movement. I've since mounted my camera on a small tripod to avoid this. Best to watch with smaller dimension/screen size.

[@skulleader]

Hello dear Sir, Awesome video. I would like how can create all the white edges all around the windows of the cockpit ? In fact you paint the narrow edges with a white color or other method ? Here I join you one photo of these white edges: i923.photobucket.com/albums/ad71/Skullr01/Withe%20edge%2001.jpg Please can you explain to me because it's not easy to do, a great thanks in advance and excuse me for my poor English. Best regards, Olivier.

[@InterstellarModeler]

If you refer to 9:17 in the video you'll see that I used plastic white frames that were ordered from gentleman named Steve Coats. You can find him on facebook if you join up to the Space:1999 Props and Ships facebook page. They are very inexpensive and save you from having to paint these white frames because yes...they can be a challenge to do. If you email me at interstellarmodeler at gmail...I can give you his contact info. Thanks for watching.

[@skulleader]

Hello, Once again I would like to thank you for your kindness and your explanations. There's few minutes I've send you one e-mail at your adress: [e-mail] please can you tell me if it's the good adress ? In advance a great thanks, Olivier.

[@InterstellarModeler]

+skulleader yes that's the one

[@skulleader]

Hello dear Sir, I have a little question concerning the type of cement that I can use for the frames of Steve Coats, is it better to use this product: Bond-2 Bondene 2 oz PLSU0003-DISC PLASTRUCT or Model Master Fast Drying Liquid Cement for Plastic ? Lien of these two products: www.ebay.com/itm/122077549316 Or www.ebay.com/itm/252395962793 In advance a great thanks, Olivier

[@InterstellarModeler]

skulleader i used testors cement but u might want to consider Tamyia's extra thin cement. It has a fine applicator that would work well for attaching those frames.

[@reticulan5]

Your a skilled model builder, but this has to be by far the worst over fiddley model kit I have ever attempted. The tool designers clearly did not car or have in mind the end result. Which of course is the builder. The spine should have been in 1 or 2 pieces. As it is nearly everyone I know who attempted this kit. Ended up with a crooked spine. Then others who just threw the kit to the side. You need to make sturdy jigs for a lot of the assembly. Instructions are also badly done with way too much figuring out and redoing of a lot of parts.

[@InterstellarModeler]

I'm sorry you had such a difficult time with the kit. You might want to touch base with a facebook group called Space 1999 Props and Ships on Facebook. So many group members have built this kit and may have recommendations on how to address some of your issues. Another alternative would be to consider building the 1/72 kit they released. I've not built that one but apparently is a very good model kit to work with. Thanks for watching.