Solidworks tutorial | Sketch Backhoe in Solidworks

[@glendcruz6456]

Thanks for your tutorial, which is excellent. I did the same project in Inventor using the same specifications and it has come out perfect. I have added a few more constraints to the bucket and hydraulic cylinder to prevent it from tipping over. Keep up the good work. it keeeps me ticking in my old age. You are a genius and a decent bloke.

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@glennfelpel9785]

Very well done. This is good to watch as I have learned several new techniques I did not now existed in the modeling exercises. Thank you for sharing your knowledge.

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching i hope you enjoyed

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@harshrupani6949]

can you please share all parts and assembly?

[@gamemaxin4736]

Really nice, I enjoy it, good job 🌷🙌

[@tranducthien1987]

Thank you for your tutorial. It is easy to understand.

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@ahmadmomtazan2855]

Thank you for sharing the video. It would have been better to show the 2d plan of each part at the beginning. Thank you by the way

[@HaiderSajjadkhan]

can u please share detailed calculations which justify the length and everything

[@CADTUTORIALmax]

very useful, thank you for share!

[@3DimensionalCAD]

in 7:33 you say tangent.. I think it's perpendicular! Sorry for correcting!!

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for correction i will do it here in my model,

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@Solidworks_Tutorials]

I love this tutorial. Thank you for sharing

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@ehabalshalah2978]

Is it possible to draw complete excavator ?

[@CADCAMTUTORIALBYMAHTABALAM]

i already uploaded complete wheel loader video, and its body almost similar to excavator , Solidworks tutorial | Sketch Wheel Loader in Solidworks

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@theroadtonotown1616]

Why were stabilizer and bucket on right plane, and the rest of parts were drawn the front plane? I understand the concept but I am not sure it would make a difference would it?

[@zxcv923111]

Hi thanks for video. Can you draw whole excavator? (including cabin)

[@CADCAMTUTORIALBYMAHTABALAM]

i already made an Excavator, kzbin.info/www/bejne/nn2qkHVtjqypkJo

[@junaidhussain4781]

CAD CAM tuturial, how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@qusai.al-awabdeh8227]

Amazing tutorial, thanks a lot! How can I get the solidworks files u did in the video. I’d really appreciate it if you can share that!! 🙏

[@bilalkaraman1905]

Can you upload the drawing file?

[@marktgsxr]

I love these tutorials,learnt so much from them! would you do one for an excavator scrap shear?

[@junaidhussain4781]

, how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@ehabalshalah4911]

HELLO CAN YOU DRAWING CHAIN FOR EXCAVATOR ?

[@CADCAMTUTORIALBYMAHTABALAM]

ok i will try.

[@ehabalshalah4911]

Thanks

[@leongwaikin4090]

can i know which model of backhoe is this?

[@TAUFIKCADTUTOR]

wooooooooooooooooooooooow!!!!!!!!!!!!!!!!!!!!!!!!!!

[@yazansy2258]

What is the standard for this model and the name of the model

[@kingkian9857]

The assembly is under defined? Is there a way to fully define it quickly

[@ocenerai3989]

my solidworks is Future than urs so got lots of problem cant do assembly of piston n cylinder properly though its helpful im on my project work n thanks for ur drone video as well

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@naveenprabhu7551]

It's very useful .. Can you send me a 2d drawings for these models ...

[@theroadtonotown1616]

Can you please give a tutorial of an off shore knuckle boom crane in the very near future?

[@muratkahvecioglu715]

very thanks. can you drawing cat 320 excavator. (bucket, arm, boom)

[@muratkahvecioglu715]

1:16 model cat 320

[@CADCAMTUTORIALBYMAHTABALAM]

this is the simple model of bucket with arms.

[@kevalwalavalkar4292]

Hey What is the material specs? Which material should we use for analysis in ANSYS?????

[@souhig388]

est ce que je peux avoir la vue eclater svp

[@sanjeewaranasinghe5763]

Sir. how can I send you machine details now I haw all the details about machne?

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@dickihendri4727]

Nice tutorial dude, but you forget the fillet by the way.

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@williamhuang5329]

Hanzhen harmonic drive gear , industrial robot arm gear reducer

[@theblue2219]

thank you so much .

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching i hope you enjoyed.

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@3DimensionalCAD]

The assembly is wrong!! First of all you assembled the arm to the feather with the wrong pair off holes.. and second there is one piston missing!! How will you achieve the "elbow" motion ? The parts are ok!! :)

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks, its not complete. i will do a full excavator in future,

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@sukumar4584]

Please share 2d detail drawing To save the time easy make

[@junaidhussain4781]

how do you know from the solidwork for the bucket, which one is height, width and length, this includes the part you transport for the digger.

[@shameershah917]

Can u please upload this file here?

[@ehabalshalah2978]

hello can you send drawing about excavator ?

[@CADCAMTUTORIALBYMAHTABALAM]

watch wheel loader complete tutorial kzbin.info/www/bejne/nn2qkHVtjqypkJo

[@ViniciusSouza-lk4co]

like ......

[@CADCAMTUTORIALBYMAHTABALAM]

Thanks for watching i hope you enjoyed.

[@JoseGonzalez-dm1wd]

33:15

[@samirtamboli-z7o]

Drafting send

[@joshbrothers2176]

You missed a cylinder bub

[@mehmetcelik1850]

Yanlış montaş yapıolar bunu gören bi benmiyim