Can I Get The Off-Road 6x6 Done Before The Baja 1000?!

So I got to build The Off-Road 6x6!
Check out Barnes4wd.com
Use code "Morr" for 10% off!
Download my FREE app at www.morrstuff.com
Subscribe / @mattsoffroadrecovery
Watch MORR Videos:
Is This A Bad Omen? Ford Baja Stuck!
• Is This A Bad Omen? Fo...
Can The Off-Road 6x6 Finally Make a Recovery?!
• Can The Off-Road 6x6 F...
I Can't Believe One Nut Can Do This Much Damage!
• I Can't Believe One Nu...
Things Are Getting Serious... The Off-Road 6x6!
• Things Are Getting Ser...
I Can't Believe This.... Again?!
• I Can't Believe This.....
Who Did This?! This Is Such A Mess…
• Who Did This?! This Is...
Smash and Grab…Criminals Invade My Town!
• Smash and Grab…Crimina...
Need a cool Hat, T-shirt, or Rope:
Matt's Off Road shirts, hats, hoodies, keychains and stickers!
www.mattsoffro...
Matt’s rope of choice 30
Matt's Recovery Rope by Yankum Ropes
www.mattsoffro...
Matt’s Straps, how we tie down our vehicles
mattsoffroadre...
Matt's Tools: Tool Burrito
mattsoffroadre...
Arcdroid CNC: arcdroidcnc.co...
Check out the Miller Multimatic 220:
www.millerweld...
Check out the Miller Arcstation:
www.millerweld...
10% Off Discounts with our Friends: Use Promo Code MORR
Rock Slide Engineering
rockslideengin...
Barnes 4WD
www.barnes4wd.com
Yankum Ropes
yankum.com/
Rock Slide Engineering
rockslideengin...
Flog Industries
flogindustries...
Yukon Gear & Axle
www.yukongear....
Full Throttle Battery
fullriverbatte...
Rugged Radio
www.ruggedradi...:
Golen Engines: Use the code MORR for $200 off at golenengineservice.com
Jeep Cherokee XJ bags, we use ours for first aid.
www.amazon.com...
Follow us on Facebook!
/ mattsoffroadrecovery
Follow us on Instagram!
tinyurl.com/y6...
Please like, subscribe, and share!
Thanks for watching, from all of us at Matt's off-road recovery!
This video contains a paid advertisement

[@Kevin-ti3rz]

Cool little bonus video of Katlyn . And she is a true driver and knows how to hang on for dear life. Plus the "Someone better have that on video" was great to hear ✓

[@fanficrulez]

I was coming here to see just that having a wreck like that and her only concern was a video? That's awesome

[@rickmossop3733]

I know a guy that rolled his truck and stuck his arm out the window to catch himself. He was in a cast for awhile.

[@Hrspowr]

@@rickmossop3733 apt retort lol sorry, my comedy bone was at odds with my sympathy

[@tobymcnicol922]

does Katelyn have a channel? she can drive.

[@vanDeudekom]

Jep,..... there is a new name for Tough Cookie = Katelyn

[@Bondodon1849]

Congrats to Katelynn! Looked like a rough ride going down the 30 ft rock, but her first words were "I hope someone got that on video". She rocks! (pun intended) Nice job drilling and tapping too!

[@russbell6418]

The best tapping, with the least breakage, depends on straight tap. If you have a tap wrench, remove the bit from the mag drill, set the tap in place, and align the tap with the drill. Get Matt to build a dead center for starting taps. (For the next project, looks like you got this one.) Yep, great roll footage! Glad you weren’t injured. Glad this year was slightly less exciting!

[@SimonBauer7]

​@@russbell6418yeah getting taps in straight by hand is a matter of experience, i have it, took me a long time to get it though.

[@hankstar56]

Im 68 years old and a retired mechanic. When i was 23 or so i had a bench job to build a corvair engine for an air boat. Customer supplied factory .60 over size pistons. I didnt get to hear it run till he took entire shop personal duck hunting in port aransas. Only corvair engine i ever built. When i road in the boat i was quite proud of myself. It sounded like helicopters in the back bay. Customer was real pleased with my work. Love your videos.

[@larrycopenhaver]

I am about a hour and a half from port aransas

[@richardhamilton4217]

Great Story!! Great Memory for you.

[@natkemp-tousant4211]

I love the Jeep xj. I have watched thousands of xj videos .My interest in Offroad recovery started when I got mine stuck the first time. The xj is what led me to this channel. Katelyn's roll over was the scariest xj video I have ever seen. Her response Priceless. She has experienced something thee most experienced hope to never and made a clever comment when the dust settled..very cool

[@gazzafloss]

Little "Peanut" makes no secret of the fact she just loves attention from her people, (but particularly you Matt), and loves to cuddle up. She's such a "gooood dawg".

[@jdougn2255]

I love that they share those clips of Peanut & the other dogs.

[@davestevens4263]

The better you treat your dogs , the more they love you . People! Not the case . Id live with 20 dogs before 1 human . 70% of the humans ive delt with have screwed me over . People are evil

[@willemp6432]

She loves Matt unconditionally. He saved her half frozen on the highway. Collie dogs are very bright. They will never forget and be for ever loyal.

[@larryjohns8823]

Peanut just loves to give everyone doggie kisses😊

[@goodmanuni09]

Peanut keeps that up she'll be getting a call from HR. ;-)

[@Mollie-n9m]

14:26 That was neat how Peanut wagged her tail right on cue! Way to go Kaitlyn in the rock crawling! Great seeing Ed still keeping an eye on the progress. That's a torquey little engine Rudy, I hope it does really well for you. Thanks for the video.

[@Deadcntr]

Great job Katelyn! Congratulations on your 2nd place finish.

[@johncannon310]

About a month or two ago I suggested that you get a mag drill. Awesome to see you using one today. Today's suggestion is to tap the holes you drill before you remove the mag drill. You can either power thread them, depending on the thickness and material, or use the drill with a pointed centering pin. Makes it much easier to have the drill hold the center of the tap. Love your videos!!!!

[@SnowPiercer1975]

I concur. As a tool and die maker myself, power tapping saves all kinds of time as well as ensuring the threads are straight. We have two mag drills where I work...both probably 50yrs old and ready for the boneyard. They make it more challenging to drill what should be easy with a proper magdrill😂

[@hunterrick4]

I was wonder how a auto reverse tapping head would work with a mag drill. I use mine a couple times a year, well worth it in my opinion

[@ericjohnson1897]

@@hunterrick4 I use tap matics everyday. They are amazing. But probably too tall for the mag drill.

[@ScottDLR]

A bunch of us made that suggestion over the years!

[@sean_vikoren]

Did not know Katelyn was a badass! Nice. Your shop has above average savage.

[@Cassiebuble]

I watch 100% for and love the MORR fabrication, I don't dislike the recoveries but in truth I really only watch them to support the channel.

[@larrythompson8630]

I am 70% recoveries, 30% shop.

[@lint2023]

That clip of Katelynn shows again that she is totally enjoyable, totally adorable, and totally awesome. Everything at MORR is so much fun!

[@THISISNIDDY]

@36:00 that mouse by the wall behind Matt 😂

[@RobMilanowski]

That mouse got woken up by the noise.

[@farr2004]

I think there was two.

[@ericlindhorst1320]

I finally spotted it!! That's funny.

[@stubyjones1]

They need a shop cat!

[@markbutler6634]

That was a big mouse.

[@geronimotiveman6048]

Everybody is being serious and thinking and working, suddenly Rhett's voice from under the truck, "It's pretty nice and cool under here actually." I don't know why but that cracked me up.

[@rickarndt3895]

I don't know but it seems like to me your gonna have to space those back axles out a little to make room for bigger tires and you truly want some bigger tires ,say like maybe some nice 52" gumbo monster mudders they are truly some badass tires. Good for any terrain you can throw at them.hell yeah.

[@garychandler4296]

More shade for Rhett...

[@713Jflo]

8:58 whoaaaa … she sounds like she was having fun on the down. Kaitlyn is a tough girl.

[@t3chnicianb3000]

Katelyn is a total sweetheart on flat land. Put Her in a rock buggy and She is fierce!! Bravo to the whole MORR team. ✌

[@Z-Bart]

What a great save on that downhill. Way to get on the gas to keep from endo-ing.

[@EliannaWa]

Katelyn killed it in the competition! Also, that XJ roll over was gnarly! I seen that video the other day, but had no idea it was her!.

[@TheDaumen]

Katelyn, for future reference you can tap with your mag drill. Even if it doesn't reverse you can run your tap in with the drill then release the tap from the tap holder and back it out by hand. That saves lots of elbow grease and time. It also means the tap will be perfectly lined up with the hole after drilling so much less likely to break taps. Also that roll over was crazy. Even more crazy was the first thing you said while getting out. "Hope someone got that on video" Impressive young lady for sure.

[@michaelalcocer6778]

Taping with all those extensions is almost guaranteed to have the tap go in crooked and on a deep thread more likely to snap if it is threading uneven.

[@marvincarter870]

Ok lots going on at Matt's off road recovery. Spud truck upgrades, sand buggy drives, KaitLynn video which was awesome! Nice to see Rudy in the shop. Good video!

[@ljackson8220]

Congrats Katelyn. Nice to see young people enjoying the outdoors

[@GarrettKoval]

Damn. Get it Kaitlyn. Girl obviously knows how to drive, that acceleration to get out of that endo was awesome. Her dad’s obviously a damn good builder and trainer him self.

[@hillwilliam]

Love the sound of Rudy’s race motor. Reminds me of my first car, a 1962 Monza. Thanks for the memories.

[@61rampy65]

My first car was a 62 Monza as well. Paid $40 for it.

[@TheJoyFinder]

Katelyn's dad is traumatised for life. Katelyn jumps out more concerned whether someone caught it on camera. 😂

[@StunningModelMadisonHumphr-n2s]

I love these shop builds, It's like Saturday morning cartoons when I was a kid. All your content is great, the team on camera are all super fun to watch too. You have a great family vibe :D and what do I say about the rigs...I've always loved the idea of putting classic cars on lifted chassis so this is the perfect channel :D Keep up the great work :D

[@Mattwiistand]

Katelyn is soo awesome!!! Love seeing her compete

[@surfnerd07]

“As you can tell, we’re not in Utah.” Barely anyone could tell. 😂 Junipers.

[@jimyeats]

Utah has got its fair share of junipers too.

[@bapasrcadventures3619]

Please get the poor girl a proper tap handle! It makes it so much easier. Easier to start the tap straight and easier to tap and won’t break taps as much. Life long machinist here.

[@michaelalcocer6778]

Hopefully a spiral point tap as well.

[@andiehyde3714]

You saw Matt using a Crescent to drive in a tap. Seen the man build a UJ with a carpenter claw hammer. They don't do the correct tools for anything.

[@danielsmith9500]

Your speech on kids is 100 percent. My daughter has had my sweet old 95 Chevy the last two weeks and I was under her car all day yesterday replacing the fuel pump and about to replace a ac compressor and clean the system out and get her ac ice cold agaim

[@Trailryder74]

Lots of good stuff in this vid… Katlin survives a wicked roll, Rhett gets Stuck and a haircut (miss the Mullet). Good to see Rudy back in the MORR shop. Anybody else see a mouse in the background when Rudy starts his new motor at 36:00?

[@markm7311]

Good catch! 😅

[@peterluchak1678]

Ha ha! Good eye!

[@anthonycrumb9810]

Little bugger was scared chapless :-) What are these crazy people doing 🤣🤣🤣

[@jer4whlr0210]

Congratulations Kaitlyn!! Awesome job! So wonderful to see our young folks getting involved in these events. Over on Colt's channel, he spoke with the Western Pro-Mod champion who is 16!!

[@kevinlee6731]

Dang Katelyn!! That was some awesome driving!

[@kevbev1524]

Who does MATTMAN call when he needs to make a call? RUDY....!!😂❤ Especially when it needs to be RAD. 🎉

[@ralphwilliams6123]

Matt, kiddos for giving her video time on your channel for her great rock crawling achievement!

[@duramaxdad]

Cheetos.

[@jimaycock5725]

Matt, I know where you are coming from on the engine crossmember Ford made some big crossmembers. I had to cut my 2000 Ford Ranger crossmember about the same way when I installed my 552 big block Ford in it to clear the oil pan. People said it would be too weak but after putting braces back on it I never had a problem out of it. It runs 5.80s in the 1/8 mile at 118 mph 9.20s in the 1/4 mile at 148 mph.

[@JaseboMonkeyRex]

Congrats, Katelyn, on your success! And Matt, you are such a generous man spreading the attention of your channel to everyone in your circle.... it's such a rare form of generosity in today's world. 🎉🎉🎉

[@stevo6430]

Matt, if you use “Gun Taps” you can power tap as long as you use cutting oil

[@derekhartley4480]

Was looking for someone who was thinking this as well. I prefer a spiral flute tap for power tapping, but any machine tap will work. Spiral flute will just pull the chip out so you don't have to fish them out of the box section. If you use a countersinking bit before you tap it you can add a chamfer so the bolts start a little easier too.

[@davidbarnsley8486]

Kaitlin can certainly drive them rocks 👍👍🇦🇺

[@cindiheslin6782]

Congratulations Katelyn, and your reaction to the rollover was priceless.

[@paidinred1]

Right. I wasn’t even there three years ago and I was freaking out!

[@gigiogigio5386]

"Somebody Better got that on video!" 😂 Very well done Katelynn!

[@OldSneelock]

It is great that you are showing how the fab works. I have been a welder and fabricator since I was 14. My one regret is I didn't wear flash glasses the whole time. I'm 72 and I now have cataracts and had to have surgery on my left eye due to burns on my retina. It doesn't seem like much but those little spots you see after getting flashed is your retina getting a scar. Get one on your optic nerve and it's lights out.

[@zahidandrewwadhawamall4921]

Well done, Katelyn.🎉🎉🎉

[@bobbolieu9013]

It's cool seeing Rudy and Janelle in the MORR shop. It makes a great shop even better.

[@calholli]

Matt screaming.. "You're fine --- hang on.. (please don't d^3... please don't d^3)" -- lol.... Might be the funniest thing I've seen this year. I wasn't here for that cliff dive apparently

[@mediocreman2]

That wasn't Matt

[@paddington1670]

Peanut is always being very good!

[@benwalker740]

That young lady rocks 😂.

[@taylormade710]

Matt, your crew may come and go, but your videos remain entertaining. The variety of content is why you have so many fans. Katelyn is a wolf behind the wheel of any vehicle

[@garychandler4296]

Still, miss the heck outta Lizzy. Kaitlyn is cool tho...grows on ya.

[@taylormade710]

@@garychandler4296 agree, Liz can weld better than most people I know

[@rocketgt1059]

anybody notice the mouse being scared by the engine noise in the background at 36:02

[@joemamma9642]

wow nice driving katelyn!! freakin awesome!

[@ChrisTesch87]

36:00 watch behind Matt! There's a freaking mouse running against the wall while the motor is running 🤣🤣

[@danielboughton3624]

A tap handle will make tapping easier and reduce the broken tap count. If you really want to knock a pile of time off get spiral flute taps which can be machine driven. A lot of folks run them in with an electric drill.

[@SnowPiercer1975]

She could have used the mag drill while she was set up drilling the holes. Two birds......one stone

[@3vil8unny]

When Kaitlyn jumps out and yells. Holy so much respect. You are one of a kind and never let anyone tell you different. Someone like you can go anywhere and do anything🎉

[@theuglytruth8162]

Rhett and his Savant Syndrome demonstrated by his car in the sand 😂😂😂 Seems perfectly fine when it runs in the family. 😂😂😂

[@kyleseeber2920]

frkn heck, emotional rollercoaster watching Katelyns segment! Girl can drive!!!

[@cid9099]

Man, Peanut hit life's lottery when fate dropped her into your lap, that's one happy/lucky Puppy. 😍 That was quite a tumble Kaitlyn (sp) took!!! 😳

[@retiredandrollin]

Totally off from the common comments I've read thus far. Matt, you mentioned the "raising kids" topic several times throughout this video (Rudy and the engine, Kaulin out racing motorcycles, Rhett getting stuck in the sand) etc. As a father I will tell you, specially in today's society, that you and Jamie have done a wonderful job with those boys. Yes, we raise them to go off and be successful, but when they know that they can come back home and work on and do stuff with dad anytime they need, that's when you know you did it right. People come to this channel to see Cool off road stuff, great and interesting recoveries, and at the same time they get a sprinkle of great parenting! Kudos

[@bradpritchett3161]

Good job Kaitlyn congratulations Very impressive

[@woodmanengineering9708]

Oh man. Got to say... When Jake started getting in front of the camera, I couldnt help think... What a photo bombing Ham...; ). Now... This guy is a leading man. What a transformation! Love all you guys. I look forward to your Sunday videos every week in the shop. Katelyn is a rock star, brave lady. Congrats!

[@catmand5h]

At 36:03 you can see a mouse under the bench behind Matt. Looks like it's time to add a cat to the pet family

[@glyniscoleman4813]

I'm surprised they don't already have a couple of cats it's not a shop without some cats

[@tinyhauslife]

Congrats Katelyn!! Total badass!

[@Ty-bz7zx]

Well done Kat. Great skills on those rocks! Can't wait on this big blue guy to get into action.

[@rescuehoundemtd]

Man that was awesome watching Kaitlyn drive that awesome rock crawler. I would like to see more of her doing that. So glad she is ok after that insane rollover off the cliff. I seriously would have crapped my pants. I don’t know I’d ever would have gotten into another rig after that.

[@DougObenchain]

Katlyn, congrats on your competition placing. You go girl!

[@PlainStraightShooter]

Progress is Progress. Spudder Truck looking good. What a bonus. Great job Kat

[@stephenbamber7408]

Katelyn Krash Kaos................. "Someone better have that on video" 😂😂😂😂

[@TheGrizz1717]

I enjoy shop build Sunday. We need some footage of Kaulins moto-cross and more of Caitlins rock crawling. Congrats, Caitlin, on 2nd. Truly awesome. 👏

[@billscott1601]

Nice to see Rudy working in the shop.

[@nathanbrundige9786]

I love how after you guys showed Katelyn doing epic stuff and you came back to the present, all she gave us a little 'Hehe!' like it was nothing lol

[@avb0y]

I love the shop builds. Its a great mix.

[@mntmantimes]

Caitlin you are an amazing off-roader and fabricator. Two things my boss at the machine shop taught me that can speed fabrication: Once you've drilled a hole going back and forth won't make it any bigger or better. 2. You can tap holes in mild steel using an impact driver as long as you have plenty of lubrication. Watch Paul's videos, he does it all the time.

[@scark00]

Matt is the Corvair whisperer....Rudy the motor sounds good!

[@joemcintyre2090]

WOW! great job pulling out of that endo Katelyn! As Matt would say "Amazing"

[@kennykennedy6298]

You should always wear a jacket and gloves when welding. UV skin damage from welding is real.

[@FinallyMe78]

Yep

[@davidmintun]

Yup, The blond girl has it figured out though...,

[@wink9970]

Congrats to Katelynn a.k.a. CatLane. With pedigree, seems MORR it a perfect fit. Need a PINK welding hood.

[@karlwilliams6227]

Excellent videography!!! My love for automobiles made me owing a repair shop of my own here in Tynan TX. Thanks to Kathleen Mary Vella brokerage services that keeps getting me $33k monthly

[@MohammadDiluar4042]

Great post friend

[@MohammadDiluar4042]

How do you get so much in that period of time???

[@BrendaHughes00]

At the end of the day, dreams don't just happen without the resource to make it happen. Congratulations

[@RafaAlvarez-t8m]

You literally living your dream. How do you work that figure brother

[@karlwilliams6227]

Big thanks to Kathleen Mary Vella brokerage services

[@mattjessa1]

Advice for the crew welding on projects. When you're trying to fit steel that isn't the same shape or won't lay flat, put a nice hot weld on the side that is sticking out then smack it. Once you smack it, it will have cooked enough to hold where you want it. May save yall some time. Love all the videos! Keep it up

[@kalebfrog]

Kaitlyn just went up in my boom after seeing her tumble off a cliff and be almost completely unfazed.

[@dancarter482]

Katelyn is the perfect balance of one of the lads and _total_ HONEY!

[@SvoenDiccr]

I adore Rudy's race car's sound. brings to recall my first automobile, a 1962 Monza. I'm grateful for the memories.

[@shcaskey]

Rhett...did you get the family discount for the tow?😁

[@TrevorDennis100]

Kaitlyn's wee bit of video was seriously impressive. The roll down the rocky cliff was terrifying, but she was only concerned that it had been caught on video. When she was a moment away from rolling onto the rock crawler's roof, it was her lightning fast reactions gassing the engine that saved her. It had to be a reflex for her to react that quickly and knowing exactly how to save the situation. Very very impressive. Kaitlyn, you rock! Hmmmm... I didn't intend the pun there.

[@pascobori9099]

Rudy should try to measure the push rod length now that he put taller springs on the head

[@billnalder1017]

Congratulations to "Shoot From the Hip" head rebuilding from "We do it Right, bc We do it Twice Construction"!!!

[@richardvincent7764]

Lol You're fine hang on😂

[@patsgarage8593]

Katelyn killing it with rock climbing!! Congrats!! What a driver!!

[@LWilliams42408]

Matts face sitting in the passenger seat of the prerunner on the test drive says it ALL!!!😂

[@Jim-fe2xz]

I started the U of Arizona in 1966. A new friend had a 66 Corvair & since we were all drag racing our drivers he did too - all just fun. We called it the whoosh mobile from the fan sound so the next year he showed up in a 67 Camaro. Rudy's engine is no "whoosh mobile"! I wish I had my friend's Corvair now!

[@michaelhale4041]

I have to give a compliment where it's due. These young men and young lady are more competent then alot of adults.

[@markm7311]

100% agreed!!! 🤠

[@michaeleason6614]

Saw the clip of the pre runner. Old tip on springs to stiffen up a spring. You can cut a coil or coils off and add a spacer to make them stiffer. As long as they don't become coil bound. This is how we did it the old days for motorcycle suspensions. Aftermarket fork springs still follow this method. You get shorter springs with longer spacers.

[@MykeHiggins420]

Higgins is right here. Lol

[@bigredc222]

That was one heck of a great save Katlyn pulled off. She's a pro.

[@MechanicalMafioso]

WOW didn’t realize Katelyn was a DRIVER! 👌

[@uurkisme]

I love how peanut waved with her tail.

[@joemcintyre2090]

For Peanut anytime is a good time for Love.

[@SuperDeucecoupe]

Oh and congratulations Katelyn on your Grand Nationals finish!

[@Jeffreywills83]

Is it just me or when Matt and ruddy started the motor for the second time in the background on the floor behind Matt a mouse or rat ran across from right of screen to left 😂😂😂😂😂

[@davidhorting1613]

Tapping all those holes, putting the tap in a hand drill in lo-speed is better than trying to do it by hand with tee handle or socket. You put too much side loading into the tap, and they can’t flex as they’re about as hard as glass. Also works very well in the mag drill too! A two-flute taper tap is the way to go. Clears the chips out and doesn’t jam up and break the tap 👍 Loving the spud truck progress, and awesome to see the next generation gaining fab skills!!💪👏

[@shaneyboi5793]

Agree 100%, except for smaller taps, easier to flex with all that extra weight. Hopefully they see these machining comments, as they are actually worthwhile. No need to tell em how to build their projects, they got that under control.

[@vahidvahidnia1643]

You’ve outdone yourself with this one! Absolute banger.

[@R.Sole88109]

Interesting, the same bot pic as a comment on Robby Layton's newest video.

[@devenp.5508]

What’s even the point of these bots

[@R.Sole88109]

@@devenp.5508 Well, considering YT can police our comments but not the bots apparently, I've always thought they're to stimulate the algorithm so YT can show advertising companies the increased traffic analytics to entice more companies to advertise and keep YT in the billions. Or is that too cynical!.😆

[@R.Sole88109]

@@devenp.5508 Interesting, my comment about the reason for the bots got deleted but not the bots. Guess I was right.😆

[@ericszatkowski6001]

That engine test is the TRUEST meaning of “Bench Testing” something!😂😂😂

[@drewjones5847]

Keep up the shop build videos! Great progress.

[@robertr4193]

Peanut is such a cuddle bug so sweet.