Caracal 816A2 Meltdown

  Рет қаралды 110,706

GoldenWebb

GoldenWebb

Күн бұрын

Пікірлер: 270
@GoldenWebb
@GoldenWebb 4 ай бұрын
If any manufacturer has a weapon you would like seen reviewed or a tested in a meltdown, tag them in the comments or contact us!
@michaelhansen9403
@michaelhansen9403 4 ай бұрын
The new sig spear in 11.5 also theirs a guy on yt who claims his scar 16 has 40k plus rounds would be cool to test that and see if he’s full of shit. Sorry if you’ve already done these I’m new to your. Channel.
@michaelhansen9403
@michaelhansen9403 4 ай бұрын
Clarification- The spear lt in 556*
@kh1474
@kh1474 4 ай бұрын
IWI Carmel
@SurG30n
@SurG30n 3 ай бұрын
MSBS Grot PLZ From RADOM
@texasranger24
@texasranger24 3 ай бұрын
1055 - radian mod 1 1010 - Sig Spear LT 901 - Geiselle Super Duty 743 - Aero M4E1 722 - PWS mk111 686 - DD M4 V7 661 - Aero M16A4 643 - Trybe w/ DD gas tube 601 - DD M4 RIS3 587 - Caracal 816a2 574 - KAC SR-15 mod2 540 - POF 415 360 - Jacob Grey ULW
@mynameisname567
@mynameisname567 7 ай бұрын
This channel is seriously underrated. It absolutely deserves more views for all the hard work you guys are doing!
@GoldenWebb
@GoldenWebb 6 ай бұрын
I sure do appreciate that my man. Comments like these keep us going
@frogchaser
@frogchaser 7 ай бұрын
now i'm even more curious about the LMT piston upper because it also has a detent with a spring for adjusting the gas
@GoldenWebb
@GoldenWebb 7 ай бұрын
I’ve been thinking about that as well. I guess we shall see
@JohnZ556
@JohnZ556 7 ай бұрын
I'm curious too. However, the detent spring in the LMT does not stay compressed. It only has two positions, N or S. 😏I bet it will at least beat the SR-15 and DD.
@frogchaser
@frogchaser 7 ай бұрын
@@JohnZ556 also i think with a lot of heat, the gas adjuster will just seal up and shouldn't move from its position
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@JohnZ556I’d bet that as well. I’d put money on it lol
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@frogchaserlet’s hope!
@EaziD
@EaziD 6 ай бұрын
I do like how thorough this was. Very nice of the manufacturer to respond with detail too.
@GoldenWebb
@GoldenWebb 6 ай бұрын
Is was, we will be doing another meltdown of the 11.5 in normal condition soon x
@josephtardio1086
@josephtardio1086 2 ай бұрын
Good on Caracal for getting back to you with a full diagnostic on the failure.
@ragnarok5056
@ragnarok5056 7 ай бұрын
So much for the adjustability on the gas system, seems like DI is working best for the AR system - awsome vid man 🔥🔥🔥
@GoldenWebb
@GoldenWebb 7 ай бұрын
I wonder how long one would go with a non adjustable gas system
@SmallArmsSolutions
@SmallArmsSolutions 7 ай бұрын
@@GoldenWebbit has gone many time up and over 1K rounds when ran as intended.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@SmallArmsSolutions we will be testing this one again in normal gas setting to see if that changes anything. Do you think it will?
@kevinpavlich4136
@kevinpavlich4136 7 ай бұрын
I don't know if I'm the only one that requested this one, but thank you for the review! I'm very interested to see how the new one fires under "normal" conditions.
@GoldenWebb
@GoldenWebb 7 ай бұрын
We had a decent amount of people asking for this one but I do recall you asking as well. Caracal was more than happy to send them. We will be filming the second meltdown before to long
@kevinpavlich4136
@kevinpavlich4136 7 ай бұрын
@@GoldenWebb hopefully sooner than later as I was just getting ready to order one of these. Your review under "normal" conditions might change my mind. Do you have a timeline for the follow up review?
@GoldenWebb
@GoldenWebb 7 ай бұрын
Hopefully within a month but we have ALOT of meltdowns to do ranging from PWS, Aero Precision, Small Team Supply LMG, and LMT. We will get to it ASAP haha
@kevinpavlich4136
@kevinpavlich4136 7 ай бұрын
@@GoldenWebb Sweet! LMT, that's another on my list competing against Caracal for my next purchase.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@kevinpavlich4136 I love LMT as well. I hope it does good but we shall see
@dancain7565
@dancain7565 7 ай бұрын
You guys should do a PSA meltdown.
@Wildwoodjake
@Wildwoodjake 5 ай бұрын
You started the test on the “excess” gas setting from what I see. This definitely would have affected the test results due over gassing at rapid fire.
@AMG454PRO
@AMG454PRO 7 ай бұрын
Excellent work as always! Can't wait to see you test LWRC. Hopefully both the DI and Piston uppers.
@GoldenWebb
@GoldenWebb 7 ай бұрын
We’re trying to get them still. We haven’t had contact with LWRC in about 2 months. No clue what happened
@AMG454PRO
@AMG454PRO 7 ай бұрын
@@GoldenWebb probably behind on production or something. I ordered an LWRC DI upper through Opticsplanet 4 months ago, it was showing "estimated to be shipped in 4 to 6 weeks" at the time I placed my order, going on 5 months now.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@AMG454PRO could be. I started talking with them in September of last year and was told I’d receive one of each upper, never got anything
@AMG454PRO
@AMG454PRO 7 ай бұрын
@@GoldenWebb would be really interesting to see how their heavier profile barrels hold up, I hope they provide them uppers to you sooner or later ✌🏻
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@AMG454PRO me as well my friend!
@MacDuff99
@MacDuff99 3 ай бұрын
Definitely looking forward to this test being performed again in the standard gas setting! Rifle is a great value for a piston AR if it performs to it's potential.
@ondrejbordovsky7752
@ondrejbordovsky7752 7 ай бұрын
Thank you for putting so much effort and money and time into these meltdown tests, its really informative. Also I had an idea that would be pretty interesting... meltdown of DDM4V7 PRO with that heavier S2W profile barrel, probably would last much longer than the standart V7
@WebSurfingIsMyPastime
@WebSurfingIsMyPastime 6 ай бұрын
You guys are going hard with this content. This kind of thing is extremely costly
@jumpmvn
@jumpmvn 7 ай бұрын
Keep it up! I just stumbled across this channel and I love the meltdown episodes
@GoldenWebb
@GoldenWebb 6 ай бұрын
I sure do appreciate it brother! We try our best!
@SimpleMansJourney
@SimpleMansJourney 7 ай бұрын
Awesome video, I bought the trybe defense after seeing your melt down and how well it did compared to high end uppers. My cost was actually $224 through optics planet, I caught it on sale. Keep the videos coming.
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother!
@donwyoming1936
@donwyoming1936 7 ай бұрын
I wish channels would do 10,000 round AR tests like gun mags used to do in the 80s & 90s. Not full auto. Testing accuracy, reliability & headspace over 10,000 rounds. The ole Colt & Bushmaster guns survived it. Wonder if the new manufacturers would.
@GoldenWebb
@GoldenWebb 7 ай бұрын
If ammo wasn’t so high and we could prove to our sponsors it would be worth it we would. But with 10K rounds of ammo. That’s 5K in production already, on top of the price of the gun and our time. We might get to that point one day but as of right now it’s somewhat out of our grasp.
@juanthelawnmowerthief1641
@juanthelawnmowerthief1641 7 ай бұрын
The military contract uppers are made over seas in the UAE and use chrome lined CHF barrels.
@caracalusa
@caracalusa 7 ай бұрын
All Caracal USA Rifles, including those that Caracal USA sells to our Government customers use the same ChroMoV QPQ barrels.
@cookie5535
@cookie5535 7 ай бұрын
Not true lol. They use QPQ
@boygonewhoopdataZZ
@boygonewhoopdataZZ 7 ай бұрын
UAE boutta recall them rifles after they see this 😂
@SmallArmsSolutions
@SmallArmsSolutions 7 ай бұрын
@@boygonewhoopdataZZwhy? The barrel never failed. This gun failed because it was run in an adverse setting in a destruction test.
@GoldenWebb
@GoldenWebb 7 ай бұрын
I believe it’s only over seas they use the CHF barrel. That being said their barrel done great in the meltdown, no slanting or anything. Also, as we’ve seen with the knights and Daniel tests, CHF doesn’t mean much in these tests
@USMC_LAterZ
@USMC_LAterZ 7 ай бұрын
Eugene Sledge handing you magazines is awesome!
@GoldenWebb
@GoldenWebb 7 ай бұрын
🤣🤣🤣🤣
@404tactical7
@404tactical7 7 ай бұрын
Well done . You nailed it again. Appreciate the video.
@GoldenWebb
@GoldenWebb 7 ай бұрын
I appreciate you brother!
@steamsoldier
@steamsoldier 6 ай бұрын
Appreciate you guys, keep on trucking! 👍💪👍
@GoldenWebb
@GoldenWebb 6 ай бұрын
We appreciate you brother!
@MadRhetorik.
@MadRhetorik. 6 ай бұрын
Could we get a Red Right Hand LMG 20 inch upper test? They built a Heat Mitigation System into their upper that pulls heat out of their barrel and their gas tube. Would be very interesting to see it tested!
@ridnthawave708
@ridnthawave708 7 ай бұрын
First of all, glad I found your channel last year. Been enjoying the heck out of all these meltdowns. I just picked up my first well, second rifle with a piston set up. I was on the fence about doing it last year, but, after watching a video of another KZbinr at battlefield Vegas and how much they raved about the scar 16, had to get one. I now have another one but it’s in 308 and it will never be shot like this, so I don’t have any problems with the piston so far. But speaking on battlefield Vegas they shoot their guns not to the extreme you do here, but, high round counts. They have said that piston systems just do not last at least they did not see a reliable one compared to the HK. I guess in their Experience pistons just haven’t done well there a battlefield Vegas.
@RedZeppelinAirship
@RedZeppelinAirship 6 ай бұрын
Would love to see a meltdown on a BCM upper. Especially considering that T-Rex Arms recommends their uppers. I would expect similar number of rounds being sent off as the Geissele Super Duty, if not a tad higher than 1K rounds, until the rifle gets knocked down. Either way, great video!
@tx611
@tx611 6 ай бұрын
No. The Geissele uses a straight heavy profile barrel. BCM uses government and lightweight. This whole test is dependent upon barrel profile.
@josephleinhauser6130
@josephleinhauser6130 6 ай бұрын
@@tx611Geissele doesn’t use a straight /heavy barrel at all. They use a tapered profile like every other premium barrel mfg
@amineeliahiai3514
@amineeliahiai3514 7 ай бұрын
Thank you!
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother!
@j8nkies20
@j8nkies20 7 ай бұрын
Letssssssas gooooooo! Thanks for another meltdown video, mate!
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother!
@laurenplummer2306
@laurenplummer2306 7 ай бұрын
Thanks Golden!
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you!
@darryljenkins3560
@darryljenkins3560 2 ай бұрын
I gotta give it to you guys. This is a real test. Keep posting stats on these firearms.
@craines588
@craines588 6 ай бұрын
I started this video with my 816 sbr in front of me, all excited to see how it will fair…. Until I saw that gas setting on adverse, then I was yelling😆 . 500 or so rounds on adverse I think is pretty awesome since it’s getting way more pressure. Props to caracal for sending out the original and another where as other companies do not like being represented in these tests. Outstanding gun especially suppressed. Thank you guys!
@samirinnabi314
@samirinnabi314 7 ай бұрын
Love the meltdowns! What’s next pws, LWRC, lmt, scar??? Still want to see a full review of that specwar.
@GoldenWebb
@GoldenWebb 6 ай бұрын
PWS and LMT coming soon! I’ll try and get one out brother!
@skywalker9110
@skywalker9110 7 ай бұрын
Thanks for the test!Love it.
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother!
@joshsmith8432
@joshsmith8432 6 ай бұрын
I’m fairly certain you started with the gas setting in adverse. Probably a lot harder on the gun. I’m pretty certain that the middle position is the standard position
@wood-wheel-wizard
@wood-wheel-wizard 7 ай бұрын
My boy do CMMG DISSENT
@gadsdenjim8785
@gadsdenjim8785 7 ай бұрын
Does CMMG even make sear trip for those?
@GoldenWebb
@GoldenWebb 7 ай бұрын
I don’t think they can trip a sear brother
@MrStefanos11
@MrStefanos11 7 ай бұрын
Glad to see Kyle’s alright!
@boygonewhoopdataZZ
@boygonewhoopdataZZ 7 ай бұрын
Only Rifle im intrested now is the X2 Dev AR-X Lightfighter, really want to see that rapid cooling barrel profile put to work 😂
@GoldenWebb
@GoldenWebb 7 ай бұрын
Just contacted them!
@armorers_wrench
@armorers_wrench 7 ай бұрын
I think DI is better than short stroke piston. There has just been so much R&D put into the DI system at this point that its very smooth while also being light weight and reliable. Piston guns have a few niche advantages and even then a DI system can be tuned to excel in those areas as well. Particularly suppressed shooting is where most of the piston advantages start to reveal themselves but if you have a rifle that was designed to shoot suppressed like the Knights SR15/16 they work very well and personally I'd rather have an SR15 over an Hk416 or a Sig Spear LT. Piston guns are still cool, the HK416 is iconic and is the gun that killed Bin Laden and served some very elite units reliably over a very long period of time. I'd personally rather have an SR15 though.
@boygonewhoopdataZZ
@boygonewhoopdataZZ 7 ай бұрын
USMC and Delta/Seals tests have shown that DI is superior. It just wasnt a good thing back then because those three entities were pushing for the HK416
@conner12893
@conner12893 7 ай бұрын
It seems you ran it on the adverse setting for the burn down . The middle position at 12 o’clock is normal setting. Look at the size of the dots on the piston.
@GoldenWebb
@GoldenWebb 7 ай бұрын
We did because ejection was better on that condition. We will be doing a second test on normal condition as well.
@conner12893
@conner12893 7 ай бұрын
3:56 can you clarify then? In the video you said that you were going to run it on the normal gas setting and then use the hook to switch it to adverse. Just looking for transparency in the testing procedures. A lay person would watch the video and assume it was ran on the normal setting and failed. Thanks for replying, keep up the good work.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@conner12893 did you watch it till the end? We give about a 4 minute conversation on how was ran it on adverse condition due to ejection pattern being better and didn’t take into consideration the extra ware it would make on the rifle until after we was finished. We used the provided buffer and spring from factory as well. We have another upper that has been sent to us that we will also be testing in just the normal configuration.
@conner12893
@conner12893 7 ай бұрын
@@GoldenWebbno I dipped out after the thank you outro and jumped into the comments. My adhd got the better of me 😂.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@conner12893 hahahaha your fine brother!
@MontanaWild78
@MontanaWild78 7 ай бұрын
In a 100 years people will discover a lead deposit in that hill.
@lucusallen42
@lucusallen42 7 ай бұрын
Can’t wait for the Pof video
@GoldenWebb
@GoldenWebb 7 ай бұрын
Stay tuned!
@justanotherinternetexpert7743
@justanotherinternetexpert7743 7 ай бұрын
Have not watched the video yet: I am super excited about this video, i have been wanting a Caracal 11.5" upper for awhile now. Lets see how it does! Fingers crossed it puts on a good show! Edit: After watching video: man that is crazy, i totally thought it would go longer! Kinda disappointing, but it is just one gun. I still believe in the design.
@connorburnes7697
@connorburnes7697 4 ай бұрын
Considering the KAC, DD, etc. actually blew up after similar round counts, I’d say buy with confidence.
@brudamiranda3314
@brudamiranda3314 7 ай бұрын
Crazy meltdown!
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother’
@menumlor9365
@menumlor9365 7 ай бұрын
I here 816 is 2x better than the hi 416 at half the price. It was made specially for desert ware fare. I really liked this video and will likely buy an 816 soon.
@seancastillo5763
@seancastillo5763 6 ай бұрын
The gas block settings reminded me - the SIG Spear LT also has an adjustable gas system right? It should also have an “adverse” mode, I dont think you used it in the Spear meltdown vid. New Spear vid with the 16” barrel and adverse setting ? 🙂
@GoldenWebb
@GoldenWebb 6 ай бұрын
Brother to be honest I believe it was on adverse as well.
@notme3184
@notme3184 7 ай бұрын
LWRC piston and DI
@GoldenWebb
@GoldenWebb 7 ай бұрын
Still trying brother
@notme3184
@notme3184 7 ай бұрын
@@GoldenWebb Thanks for dealing with me commenting on every video
@GoldenWebb
@GoldenWebb 7 ай бұрын
Your fine brother. We’re trying our best!
@fastbanshee1999
@fastbanshee1999 7 ай бұрын
Lol i been buggin them as well
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@fastbanshee1999 keep on doing it! They might listen to some of us lol
@MarketaHoward-h5l
@MarketaHoward-h5l 2 ай бұрын
You know your firearms stay safe!
@GoldenWebb
@GoldenWebb 2 ай бұрын
Yessir!
@stevebland8298
@stevebland8298 4 ай бұрын
Very familiar with its Sig 516 cousin. The 516, in my experience, prefers an "H" buffer when running in the normal position. I suspect the 816 is the same, if for no other reason than the engineers who designed it were the ones who did the 516 before. Run an "H" buffer and on normal I suspect you will do better.
@GoldenWebb
@GoldenWebb 4 ай бұрын
It’s cyclic rate was through the roof with a normal H
@DJ-jq8if
@DJ-jq8if 7 ай бұрын
Bad ass video!
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you brother!
@frogmedic6428
@frogmedic6428 2 ай бұрын
Unfortunately for us, Caracal USA gave us an inferior 4150 commercial nitride barrel. I know how defensive they are of that change. Too bad they don’t offer us a chf cl parked barrel that the mil contracts get. It’s really unfortunate considering how much criticism the original 416 gas system receives that this 3rd gen superior system had a small parts fail. If Caracal is listening. WE the people want the UAE spec barrel and the 1913 style rail please. It also shines a light on the 416 simplicity in “overgassed”design. However, quality DI continues to mop up these misgivings. I own a 816, I’m no grifter
@TheSundayShooter
@TheSundayShooter 7 ай бұрын
Detent pin failure, only strong as its weakest link! Who did the staking on that MG lower's castle nut?
@GoldenWebb
@GoldenWebb 7 ай бұрын
It’s a factory MG lower from Daniel defense
@Dirminor
@Dirminor 6 ай бұрын
I’d like to see a meltdown on a PSA JAKL. I have one and I’m curious on how it would do and what the failure point would be.
@GoldenWebb
@GoldenWebb 6 ай бұрын
The Jakl doesn’t have something to trip the auto sear so we can’t really test it currently
@Dirminor
@Dirminor 6 ай бұрын
@@GoldenWebb Unfortunate 😂 I’m imagining the likely failure point on the JAKL would be either the barrel or the gas block though. Good videos!
@GoldenWebb
@GoldenWebb 6 ай бұрын
@@Dirminor I’d say gasblock, we’re seeing almost all pistons fail their first
@fortysomething7667
@fortysomething7667 7 ай бұрын
New subscriber...i am potentially going to buy a bcm upper complete. Could you possibly put that to the meltdown test?
@GoldenWebb
@GoldenWebb 7 ай бұрын
We’re trying to find a sponsor for one. Stay tuned
@brandondavis4306
@brandondavis4306 5 ай бұрын
did you they ever tell you what happened to this upper?
@albanfisher6857
@albanfisher6857 6 ай бұрын
when's the LMT comin?!
@StayFrostyR9
@StayFrostyR9 6 ай бұрын
Hi bro how is going where is LMT gas piston version still waiting :)
@GoldenWebb
@GoldenWebb 6 ай бұрын
We’re still filming it with classic firearms on the 19th!
@bryanduchane2371
@bryanduchane2371 5 ай бұрын
No clue how I missed this video. Regardless of what it does, I'd like to have one of their uppers!!
@JuliaJohnson84
@JuliaJohnson84 7 ай бұрын
We love you Kyle
@GoldenWebb
@GoldenWebb 7 ай бұрын
He knows he’s loved! We love him as well!
@evann1136
@evann1136 7 ай бұрын
I love the videos you make
@GoldenWebb
@GoldenWebb 7 ай бұрын
I appreciate it brother! Glad I can bring them to you all!
@ericandre80
@ericandre80 7 ай бұрын
Could you possibly try in the future with an Hk mr556a1, the bolt carrier is modified not to shoot full auto; However, you could possibly sub it out for a Caracal 816 carrier…we want to see the authentic barrel performance.
@GoldenWebb
@GoldenWebb 7 ай бұрын
It has to be a special made bolt to trip the sear and also work with the HK. We might be doing a clone 416 soon though
@ericandre80
@ericandre80 7 ай бұрын
@@GoldenWebb I understood that the 816 is in fact a 416 clone. Is it not? Thanks again for your reply…
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@ericandre80 it’s more of a reiteration then a clone. Same people that worked on the 416 built the 516 sig and this gun as well.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@ericandre80 it was engineered by the same people who made the HK 416 and the Sig 512. So more like a generation I guess
@zanegardner6488
@zanegardner6488 7 ай бұрын
Buy a BCM upper if you cant get one from BCM. I need to know how they do haha
@GoldenWebb
@GoldenWebb 7 ай бұрын
They aren’t gonna send us one. We’ve got a few donations but not that much to get one of them yet
@hairydogstail
@hairydogstail 3 ай бұрын
The minimum head space (go gauge) for the 5.56 NATO chamber is not the same as the 223 commercial 1.4636 chamber(as mentioned)..It is 1.4646..Colt and the TDP confirms this.. Any rifle that uses any kind of spring in the gas block is a faulty design as the extreme heat will set the spring (as mentioned)..The Rifle Speed adj gas block uses a spring out side of the block to correct this problem.. The gas rings on the AR bolt will be exposed to much lower temperatures and pressures compared to gas rings on an external piston..
@zanegardner6488
@zanegardner6488 7 ай бұрын
BCM, M&P, IWI Zion
@hsing4903
@hsing4903 2 ай бұрын
@GoldenWebb Man I subscribed! You might of just saved me. I was just about to buy that Caracal. Looking for that under $2k hard use piston upper/rifle. Will it be for me a: Sig 516 GenII? Or Caracal 816a2? Or PWS Mk...? Or LMT? Or stay with LWRCi brand which i have. Hmmmm?
@juanthelawnmowerthief1641
@juanthelawnmowerthief1641 7 ай бұрын
Where is the POF upper on that chart?
@GoldenWebb
@GoldenWebb 7 ай бұрын
We have it filmed but not released yet. Waiting to hear back from POF first on something but don’t want to spoil to much
@boygonewhoopdataZZ
@boygonewhoopdataZZ 7 ай бұрын
​@@GoldenWebbsheesh! If its the 16" p415 then we need to get a 16" spear lt as well 😂
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@boygonewhoopdataZZit’s a 10.5 lol
@michaelthrelkeld212
@michaelthrelkeld212 6 ай бұрын
I’ll take my Radian any day! Great content
@tommythompson8982
@tommythompson8982 6 ай бұрын
Hey guys! What do you think about making a video on DDM4V7 Pro meltdown? It has 18" heavy profile barrel and a rifle length gas system. Would be very interesting to see what happens to it!
@lauralogan9819
@lauralogan9819 7 ай бұрын
We shall see how it goes on the normal condition but I don’t see it making much of a difference
@GoldenWebb
@GoldenWebb 7 ай бұрын
I could see it making alittle bit of a difference but we will see. I hope it sets the record but who knows
@jake7077
@jake7077 3 ай бұрын
When is the update video?!
@oliviabowen1032
@oliviabowen1032 7 ай бұрын
I wonder how long it would have went without the adjustable gas block
@GoldenWebb
@GoldenWebb 7 ай бұрын
I’m not sure. That’s something I’ve wondered as well. We shall see how it goes with the normal condition and see if the detent spring wears out first on it as well
@Mike-yy4ll
@Mike-yy4ll 7 ай бұрын
Do a meltdown of CMMG Dissent, Foxtrot Mike FM-15 or BRN-180!
@carlbecklehimer1898
@carlbecklehimer1898 17 күн бұрын
I'd like to see what it would take to make an upper be able to consistently go past 1,000 rounds.
@llhosall7735
@llhosall7735 7 ай бұрын
DI > Piston
@GoldenWebb
@GoldenWebb 7 ай бұрын
DI is still in the lead
@doon44
@doon44 6 ай бұрын
Can you guys do a a meltdown on a PWS MK114 orMK116?
@rubysmith3947
@rubysmith3947 7 ай бұрын
LMT Meltdown on the way??
@GoldenWebb
@GoldenWebb 7 ай бұрын
Yep, filming April 19th!
@DoSe420
@DoSe420 7 ай бұрын
Gotta get BCM to send you something. Id like to know the breaking point even tho ill never reach it.
@GoldenWebb
@GoldenWebb 7 ай бұрын
We’ve asked multiple times. They won’t send it
@BmanPA18458
@BmanPA18458 6 ай бұрын
Not gonna be much different than DD
@MatthewAyers-s4j
@MatthewAyers-s4j 7 ай бұрын
Still waiting on that BCM brother lol
@GoldenWebb
@GoldenWebb 6 ай бұрын
We trying my man I promise
@jesseoneil7705
@jesseoneil7705 7 ай бұрын
Do LWRC !
@shadowsteel11
@shadowsteel11 7 ай бұрын
When are you dropping the LMT?
@GoldenWebb
@GoldenWebb 7 ай бұрын
We will be filming it on April 19th!
@shadowsteel11
@shadowsteel11 7 ай бұрын
@@GoldenWebb piston or DI?
@kennethrenquist9414
@kennethrenquist9414 3 ай бұрын
What kinda helmet are you wearing?
@GoldenWebb
@GoldenWebb 3 ай бұрын
Team Wendy
@efrenrodriguez741
@efrenrodriguez741 7 ай бұрын
Waiting on the adm 13.9
@GoldenWebb
@GoldenWebb 7 ай бұрын
We contacted them!
@efrenrodriguez741
@efrenrodriguez741 7 ай бұрын
@@GoldenWebb What did they say?! Appreciate you always replying 👍🏼
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@efrenrodriguez741 not said anything back yet lol
@recuerdosdevietnam8765
@recuerdosdevietnam8765 7 ай бұрын
Contenido de calidad
@GoldenWebb
@GoldenWebb 7 ай бұрын
Thank you for viewing my friend! Welcome to the channel!
@jgannon5105
@jgannon5105 7 ай бұрын
I watched the new Anderson complete rifle while they took the upper off the Anderson and that did over 1,800 rounds and that's a $400 gun Grand thumb did a PSA $400.00 Bill kit and he did the same thing and they shot over 8,000 rounds through the gun, just saying.
@trevinowoods9602
@trevinowoods9602 7 ай бұрын
Do a SOLGW
@조성현-i3q
@조성현-i3q 6 ай бұрын
Is it actually a live bullet where a bullet is fired?
@hansblitz7770
@hansblitz7770 7 ай бұрын
Yeah, short strokes need to be manufactured to a much higher standard than D.G.I.
@GoldenWebb
@GoldenWebb 7 ай бұрын
They seem to be
@DevonReclaimed
@DevonReclaimed 7 ай бұрын
I guess i don't need to request a Sig 516 video because this gun is virtually identical and you cant buy a new Sig 516 anymore. Love mine. But i I know its limitations
@GoldenWebb
@GoldenWebb 7 ай бұрын
Yea the 516 is somewhat hard to get ahold of now a days. It doesn’t help that Sig doesn’t make parts for them anymore so if something fails it’s done for. Thats pretty much killed the rifle. I hate that as well because the 516 was a great rifle.
@derekmclv
@derekmclv 7 ай бұрын
Aren't you missing the Radian on that list? Sorry if the question has already been asked.
@GoldenWebb
@GoldenWebb 7 ай бұрын
It’s at the main top!
@derekmclv
@derekmclv 7 ай бұрын
Okay, i was just looking at what you show on the video, and that doesn’t list it.
@glocksp80smd
@glocksp80smd 3 ай бұрын
Why do you say before you start shooting? Asked alot lol
@tomsigitura7824
@tomsigitura7824 6 ай бұрын
SOLGW Meltdown?
@Digesale
@Digesale 7 ай бұрын
Adjustable gas system was failure point
@BmanPA18458
@BmanPA18458 6 ай бұрын
Any luck with ADM?
@GoldenWebb
@GoldenWebb 6 ай бұрын
Not yet brother
@KoolKarl-qq2pr
@KoolKarl-qq2pr 7 ай бұрын
Is that Humpty Dumpty in the back?
@69GAMING699
@69GAMING699 4 ай бұрын
bros just ripping full drum mags
@jasonvoorhees1324
@jasonvoorhees1324 7 ай бұрын
Have you ever meltdown a Daniel defense rifle, I would be interested in a Knights armament, and Noveske, meltdown? It would be awesome to see.
@GoldenWebb
@GoldenWebb 7 ай бұрын
We’ve melted 2 Daniels, 1 knights, not melted a noveske yet. Check back in our other meltdowns and you will be able to find them
@armorers_wrench
@armorers_wrench 7 ай бұрын
They have done a KAC and a Daniel Defense. KAC didn't do very well but it was because it had a gov profile barrel. Same thing with the DD tbh. They both suffered barrel ruptures due to the front heavy nature of the gov profile barrel. If the KAC/DD had a barrel profile similar to the Criterion CORE tapered profile both guns would've gone a lot further.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@armorers_wrench I agree
@HiSp33D
@HiSp33D 7 ай бұрын
PSA Jakl meltdown?
@GoldenWebb
@GoldenWebb 7 ай бұрын
Jakl can’t trip an auto sear sadly
@rosalawrence8528
@rosalawrence8528 7 ай бұрын
Someone’s “Nosey”
@GoldenWebb
@GoldenWebb 7 ай бұрын
Loll
@Mrgunsngear
@Mrgunsngear 7 ай бұрын
🇺🇸
@wyattweiman9103
@wyattweiman9103 7 ай бұрын
Pws??
@chrischiampo7647
@chrischiampo7647 6 ай бұрын
Is The Gasblock Pinned It May Have Walked Off The Gas Port 😮🥵😊
@timewave02012
@timewave02012 7 ай бұрын
Small Arms Solutions and Mrgunsngear talk up the 816 as an improved Sig 516, and the 516 an improved HK 416. I appreciate how product designers learn from past experience, so each iteration is theoretically better than the previous, but reality is changes introduce risk of new problems, and this gas block failure appears to be one such problem. Some will suggest meltdown aren't even a valid test, but if a given system doesn't perform better than a quality internal piston AR, what's the point?
@GoldenWebb
@GoldenWebb 7 ай бұрын
It’s somewhat a give and take at some point. Internal gas system would be more reliable in nothing but full auto war, but for civilians that don’t have full auto I’d prefer adjustable gas. We have plenty more external pistons, including this one, to melt so we shall see how they hold up!
@SmallArmsSolutions
@SmallArmsSolutions 7 ай бұрын
This carbine was shot well beyond its design parameters. You increase your cyclic rate well over 200 rounds per minute using the adverse setting. When used properly this weapon system has passed and exceeded all NATO testing specifications. Many weapons manufactures, only use a 2-position gas valve due to just such confusion. Suppressed and unsuppressed. This way you cant inadvertently put it in an adverse position that was designed to get the rifle working in limited adverse conditions, especially a rifle that was designed to work in the desert. The Caracal rifles were designed for this purpose to have that position the troops were trained what position is appropriate for what condition.
@GoldenWebb
@GoldenWebb 7 ай бұрын
@@SmallArmsSolutions caracal believes in the normal position it will set the record on our meltdown tests. We shall see though. We will also be testing it in our new torture test segment we have been working on, but it’s still a few weeks/months out.
@SmallArmsSolutions
@SmallArmsSolutions 7 ай бұрын
From my experience, I expect you to hit the 1k mark. The designer has done several demos with this for foreign customers. It’s consistent. There is one thing I expect you will find with many of these videos. All these AR barrels will hit transformation temperature between 1200 and 1500 degrees F. This is where the heat treat reverses and the barrel fail. Your failures will not be operating system dependent but barrel temperature. Some barrel will take longer and some less to meet that temperature depending on contour (heavy vs mid weight vs light). With internal piston, if you have a non mil spec gas tube, the gas tube will fail. All gas tube are not equal. Many commercial one will not tolerate temperatures of full auto fire. External piston, only thing that should stop it is barrel droop that will prevent operating rod to function. But you can count on that temperature on both failing at the same time with same profile barrels.
@TheMonstervirus
@TheMonstervirus 5 ай бұрын
Can't find a sig 516 meltdown
LMT DI and Piston Meltdown (Feat. Classic Firearms)
23:02
GoldenWebb
Рет қаралды 118 М.
Radian Mod 1 14.5” Meltdown
14:18
GoldenWebb
Рет қаралды 144 М.
Family Love #funny #sigma
00:16
CRAZY GREAPA
Рет қаралды 14 МЛН
Friends make memories together part 2  | Trà Đặng #short #bestfriend #bff #tiktok
00:18
I'm The Ultimate Weapon
42:35
penguinz0
Рет қаралды 4,8 МЛН
Caracal USA CAR816 A2  - MADE IN USA
3:42
caracalusa
Рет қаралды 14 М.
The Energetic Armament Ferox 5.56 Silencer
6:33
Energetic Armament
Рет қаралды 2,6 М.
Does Russia’s Newest Combat Rifle Kinda Suck?
18:02
Brandon Herrera
Рет қаралды 4,4 МЛН
Revolver Shotgun Unboxing - Sulun SR-410 Silver
5:41
Canadian Gun Channel
Рет қаралды 766 М.
Colt 2024 Blued Python review.
4:48
rangehot.com
Рет қаралды 54 М.
B&T APC-9: The Swiss Answer to the MP5
19:03
Forgotten Weapons
Рет қаралды 105 М.
Ultimate Glock Meltdown!
15:59
Iraqveteran8888
Рет қаралды 8 МЛН
Geissele Super Duty HBAR Meltdown
18:25
GoldenWebb
Рет қаралды 94 М.