No video

No sound? No power? Fix your amplifier EASILY with THESE EASY TESTS!

  Рет қаралды 253,158

CarAudioFabrication

CarAudioFabrication

Күн бұрын

When your aftermarket car audio amplifier isn't playing sound or fails to power up the fix is usually pretty simple. In this video we cover how to use a DMM or digital multi meter to simply check the power and ground, remote turn on, and other signal sources on an amplifier to diagnose a problem for why it is not creating sound, bass, or turning on.
Learn more about AudioControl and their world-class amplifiers, thank you to them for being a monthly channel sponsor!
www.audiocontr...
🔨 Recommended DMM’s:
✔️ Budget Version: amzn.to/2IUKtPh
✔️ Professional Version: amzn.to/2pleaCe
As an Amazon Associate I earn from qualifying purchases.
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
- Ported Downfiring Subwoofer Build: bit.ly/CAFdown...
- Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
- SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
- LOUD Wrangler Build - bit.ly/CAFloud...
- SQ Grand Cherokee Build - bit.ly/CAFgran...
- Stealth Hidden Bass SQ Build - bit.ly/CAFstea...
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
SUBSCRIBE
www.youtube.com...
LET'S CONNECT!
Website: www.caraudiofab...
Facebook: / caraudiofabrication
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Switch It Up - KZbin Audio Library
Licensed under Creative Commons: By Attribution 3.0
Use of information from this video is at your own risk. You MUST view the full disclaimer here: www.caraudiofab...
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Пікірлер: 129
@stuskustomshop
@stuskustomshop 2 жыл бұрын
One other thing to mention, when testing voltage on the power and remote wires, if you have low or no voltage on both the power AND remote wires, the ground is probably faulty. Test the wires again with the black probe of the meter grounded to the chassis to confirm.
@PM-ch9fr
@PM-ch9fr 2 жыл бұрын
Dude, the timing of this video is just perfect! I've experienced this issue last week. Got a custom sound system installed by my local Car Audio shop and after a month, the amp would just shut down randomly. After investigating, the wires on the side of the amp got loose for some reasons. Easely fixed, but I gotta say, I was freaking out when this happened lol. Awesome video as always! 😉
@marceloabdelsantillanesoch6225
@marceloabdelsantillanesoch6225 2 жыл бұрын
Ñq
@markanthony2578
@markanthony2578 Жыл бұрын
What car? Ford f350?
@raysimkiss8031
@raysimkiss8031 6 ай бұрын
Ive recently fitted new rear speakers, sub and amp was working fine prior to this, after install all speakers work but no power on to amp Going to check through some these tips tomorrow
@handymadness
@handymadness 2 жыл бұрын
Is your hand ok? Saw some stitches?
@jathan7145
@jathan7145 2 жыл бұрын
Could you make a short video showing how you strip knukonceptz speaker wire? I can never get my cuts clean
@voxtrennathancollins3523
@voxtrennathancollins3523 Жыл бұрын
A knife
@Sncedayone
@Sncedayone Жыл бұрын
Practice
@Waynerking
@Waynerking 9 ай бұрын
Cheaper wire 😂
@gabrielM1111
@gabrielM1111 Жыл бұрын
Mark, quick question I accidentally plugged the ground and Power in reverse I saw Sparks when I put the ground in the power cable in the ground. Did it again this time no sparks. Fuse good. could you please be so kind and tell me what steps to take next should I check for a protection diode across the + & - like ameture radio amps have. Should I try hooking it up the right way and see what happens I'm afraid to do so in case I damage it if it isn't already damaged. let me know please bro thank you very much. It's old school crunch p-1000 1k rms 5 ch amp 70 amp fuse. Fyi: the remote was not plunged in
@juliansapp7662
@juliansapp7662 Жыл бұрын
Always double check the fuse mine looked perfect like brand new but open it up it was in two pieces
@bfromdasouth5965
@bfromdasouth5965 Жыл бұрын
3 minutes in of watching this and already figured out my issue great vid
@luiscolon4961
@luiscolon4961 2 жыл бұрын
I have a ground loop problem can you help with with your experience?
@user-ov9zm3fb5y
@user-ov9zm3fb5y 6 ай бұрын
As a automotive tech that doesnt work on the audio side that had no idea this was how they worked. My mustang hadnt had any speaker working or amp for a year. I knew i had power coming in but had no idea what was going on with it. Ended up being the amp uses the headunit ac signal from the music (static ac when on) to turn on the amp. And for some reason it lost that functionality. Jump to the key on signal from power like you suowed and it came to life. So i took the interior apart and ran a signal wire from the headunits factory key on power. And now it works. Thanks.
@itnuts3496
@itnuts3496 8 ай бұрын
Thank you so much Mark ❤ I accidentally reversed polarity of input power and blew up my amp fuses with sparks. Replaced my fuses and it plays fine now 👍
@travisnickels2163
@travisnickels2163 7 ай бұрын
What voltage level should we expect to see from a test tone at the input of the amplifier?
@ironpwns
@ironpwns 2 ай бұрын
I've been having this particular issue with my sub, it does not power on at all and all connections are good but if when I turn off my car the amp it self causes parasitic draw and kills my battery with in a few hours
@ericcollins2349
@ericcollins2349 2 жыл бұрын
Who makes that sub connection plug??? I want a couple
@basserex4991
@basserex4991 3 ай бұрын
Hello! amplifiers have + Voltage on body, How to fix this issue?
@shrunkencalo
@shrunkencalo 11 ай бұрын
checked voltage on the wires aand got 12 v then connected to amp nut nothign but still measures 12v but no voltage from control and the ground,gana chase the control wire,thanks for the quick vid veyr detailed
@AccidentalMarksman
@AccidentalMarksman 2 жыл бұрын
Is that a welt on your left hand? Stay tight…. Lol. Keep it up, Fab.
@CarAudioFabrication
@CarAudioFabrication 2 жыл бұрын
Haha caught that one while bunkering and traded out. 😅 Good eye. 👍
@fredericocorrea9814
@fredericocorrea9814 5 ай бұрын
I have an Audi A4 with the stock audio system. I get no sound from any of the doors. The dash speaker, tweeters, and the speaker in the back work but at a very low volume, i mean really low. Any help with fixing this problem would be appreciated. Thanks
@buscojosenjuarezdenuevoleo9669
@buscojosenjuarezdenuevoleo9669 Ай бұрын
I have a 1500.1 dx kicker amp it turns on but no noise at subs ? Any help 🙏🏼
@edwinfadabundii3793
@edwinfadabundii3793 Жыл бұрын
Good video. Dealing with this rn with a brand new head unit not putting out voltage from the line outputs. Going to double check with a meter playing a test tone, but looks like I’ll be sending it back to Crutchfield.
@michaelflowers6048
@michaelflowers6048 2 жыл бұрын
Here is a question you should address. Does the shape of your sealed subwoofer box affect how it plays or sounds? For example say you build a custom L-shaped box to fit in your vehicle versus a square or rectangle.
@pisceu100
@pisceu100 3 ай бұрын
How to fix clip lamp, amp turns on but no sound. Bass habit 1000.1df. Problem was of burnt subwoofer.
@MIkeDaBBoy
@MIkeDaBBoy 11 ай бұрын
Recently got a kicker cxa800.1 and it worked the first day but the next it cut out and after testing the power and ground it was reading 6Volts. I have no idea what to do cause my lines seem snug.
@LordMada
@LordMada 4 ай бұрын
Please help My PA-130 sound won't work unless I turn bass up and down... How to fix that?
@marcmarhonelifewithnogimmicks
@marcmarhonelifewithnogimmicks 7 ай бұрын
i have no power to eq or amps radio has power. i have a circuit breaker at the battery could the breaker have gone bad?
@alexcody1319
@alexcody1319 4 ай бұрын
do you have to run your ground to your car battery or can it be connected to the vehicle somewhere
@jacobm9574
@jacobm9574 10 ай бұрын
I’m using an adapter to my stock head unit and the trigger switch wire broke. Will it work if I wire the trigger switch to a 12 Volt aux switch on my truck?
@EyesNico
@EyesNico 9 ай бұрын
Hi, i have a VW Helix Amp running in car and i think it's not turning down anymore and then causing battery drain. No more drain if i unplug the amp but no more sound too. Any idea how can i check that ? and if so, how can i fix it ? Thanks in advance :)
@SaraJean85
@SaraJean85 2 жыл бұрын
How do u trouble shoot the other thing... for lowering the frequency so the amp can work... but it doesn't- still I checked everything and it still won't work. If the speaker is blown won't it make SOME noise?
@fredericgauthier7143
@fredericgauthier7143 2 жыл бұрын
Great quality video as usual!👌 Could you make a video about troubleshooting buzzing/hissing sounds from a setup just installed? I just installed mine and cant seem to figure out where this sound is coming from.. Thanks!
@fosholyfe6115
@fosholyfe6115 Жыл бұрын
Your power wires might be crossing the signal wires, or rca and power are running on same side of car
@41449666
@41449666 2 жыл бұрын
Just started recently working at a car shop where one of the Main things they do over there is sound system. Do you have videos based on sound system from installing, setting up and equipment needed? Also do you have videos explaining the basics for each equipment is needed to install a sound system. Some basic stuff what you need to know about speakers, amplifiers, and subwoofer. I'm sorry I know I'm asking a lot but as someone like me who don't have that much background About sound system I'm trying to learn as much as I could.
@handyman6858
@handyman6858 Жыл бұрын
Thanks so much, great video! I just want to see if my amp I bought at an auction would power up and it did with the remote jumper wire before Installing it. thanks for the info😅
@e90lownslow14
@e90lownslow14 5 ай бұрын
What happens when everything is connected properly, voltage and ground getting good connections, but keep blowing the onboard 30amp fuse. I’m guessing my amp is faulty? How would I test?
@Automotive_Services
@Automotive_Services 4 ай бұрын
Sounds like a short somewhere in the cable, go through and look at any locations where it could’ve gotten cut, used to have a short on one of my mods for my car and the fuse would keep getting blown and ended up having a short somewhere and just put electrical tape around where it was ripped and fix it
@whistle4388
@whistle4388 6 ай бұрын
where did the weird looking black fuse come from? Did i miss that part?
@edwardhood6252
@edwardhood6252 2 жыл бұрын
Several months back, I had a situation where my amp had battery voltage while the head unit was off, but as soon as the remote line was energized by turning on the head unit, the battery voltage at the amp dropped to zero. Turned out to be a faulty/intermittent at the point where the positive power wire was tapped into the system. I replaced the wire with a slightly larger guage wire, connected properly at the battery instead under the dash at the fuse box ( was using a previously installed wire, by a previous owner ) and the problem was fixed. Just something to be on the look out for in similar situations.
@nFiveTech
@nFiveTech Жыл бұрын
this actually just happened to me in my bmw i think and what fixed it was messing with the positive cable on the amp and battery.
@MohammedShahid694
@MohammedShahid694 Жыл бұрын
Just fitted my amp all speakers going to the amp but it's not playing any music.. .but sound is coming through even with headunit off
@W250STUFF
@W250STUFF Ай бұрын
Now this is diag! Great video!
@itzNickyJayBeats
@itzNickyJayBeats 2 жыл бұрын
So I bought a home system subwoofer, I get power to the unit and I can actually run signal through it into my studio monitors/ and successfully get sound through my studio monitors!!! but my subwoofer is just not firing at all.??? Has no sound. I have put my multimeter up to it and it is reading 3.2 ohms. Its a 4 ohm subwoofer. Can't seem to diagnose it unless that means its a bad woofer. It has a slight ruffle sound when I press it in really hard... any suggestions?
@markieb196
@markieb196 Жыл бұрын
I have an amplifier and subwoofer already, but want to add more power and sound. What should I get?
@Nanasukefkoff
@Nanasukefkoff 5 ай бұрын
Hello, ive been looking for a video guide. I have Blaupunkt 470 sf wired to 2 magnat sub speakers(bridged) and when the bass kicks the amp goes protect mode, please help.
@Jrodd2351
@Jrodd2351 2 жыл бұрын
Thank you! I recently just experienced this issue. It was the remote wire. Got pinched and broken.
@843Vlogs
@843Vlogs Жыл бұрын
If you have no remote wire the amp shuts off ? Right ? Cause I’m having the problem of no power to my amp
@alawiomar2610
@alawiomar2610 2 жыл бұрын
Hello friend I have Toyota Camry 2020 se i want to change all the speakers and i add amplifiers and subwoofer what type I choose what you opinion
@michaelspies8735
@michaelspies8735 Жыл бұрын
I need your help. My amp turns on, but doesnt put out sound, no protect mode nothing just no sound. Could you please tell me what could be the problem🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
@djprojugs6606
@djprojugs6606 2 жыл бұрын
Top tip for hyundai/Kia drivers out there. If you want to upgrade your audio and got a SPDIF factory Amp. Save up and just completely remove and replace the factory radio and amp and get some speed wire for your aftermarket gear. You do not want to know the hell you'll go through trying to work around that amp/radio instead of just gutting it.
@egtreadway4232
@egtreadway4232 11 ай бұрын
After installing aftermarket double din stereo in my jeep wrangler jk i have no sound from any of the speakers, this jeep has a factory amplifier but no blue wires its been turned on by canbus, the aftermarket stereo has the blue amplifier control wire but were would it connect? Thanks
@MoySauze
@MoySauze 2 жыл бұрын
I have a question. I want to install subwoofers in a semi truck, but I also want to install a 2300W inverter. Since both the amp and inverter connect to the batteries, would that cause any issues?
@Vindoublediesel
@Vindoublediesel Жыл бұрын
Can i just ask if theres issues with the sub like a water damage and like lets say it trys to run power to thre subwoofer is there a power saver mode? Also i have another comment id like you to read this one will make a whole lot more sense, Im just trying to work out if my amp is ruined
@mikegillespiemusic
@mikegillespiemusic Жыл бұрын
here's a question for y'all. Just installed my amp. Alpine KTA450 on an Alpine ILXW650. When the audio is centered I hear distortion (sounds like a tweeter is blown) but when I pan L or R, fade F or B...the distortion goes away!!? It goes away gradually too. Each speaker isolated sounds fine, but when everything is set to center it has distortion (high chime-y distortion) on the peaks. WTF??
@turkwiz42
@turkwiz42 Жыл бұрын
Hi, I’m having issues with my amp in getting sound out but it takes about 15 to 20 minutes for the subs to kick in….. can you please help?
@Waynerking
@Waynerking 9 ай бұрын
My JL slash 1 quit working. Checked it and it was dripping wet! Figured I need a new one but a few days later, the old warhorse is slamming again! Should I let it be or open it up to check for damage? The knobs seem to spike the sound, they must be getting worn, this thing is like 25 years old!
@Waynerking
@Waynerking 9 ай бұрын
4:00 nice feature, my JL has it. Made installing just that much easier
@aimbot_drip-2210
@aimbot_drip-2210 5 ай бұрын
What if the amp is turning on and it works but it cuts out and cuts back on I have two amps one for audio and one for sub
@sauldean6430
@sauldean6430 Жыл бұрын
My rca port on my amp have a problem i don't really know what to do with it now, amp plays sometimes and stop playing sometimes, when i check it i realize the rca port on the amp is faulty
@DeeJayIcce
@DeeJayIcce 2 жыл бұрын
Here is where I’m at with my subwoofer install (this is my first time and I am struggling at every turn): TLDR: my sub is extremely quiet even when I crank every knob to the maximum. Like so quiet there is almost no movement on the sub at all and I have to put my head on it to see if it’s on. I have an AudioControl LC2i Pro. I have crimped the rear speaker wire and connected that to the LC2i high speaker input and then I jumped the left to the right so both sides were getting the same signal. I am vampyring the power and ground on the LC2i from the amp with 12 gauge wire. The amp is an 800 watt D class using 4 gauge wire that is connected to the car battery with an 80 amp fuse. The negative is connected with 4 gauge wire to a bolt that is connected to the negative battery terminal. When measuring the battery with the car turned on (but not the engine running) the LC2i and the amp both show 12.4 on the multimeter. I then ran a tone through the car speakers and see that the RCA cables plugged into the LC2i are sending signal. I plugged the RCA cables from the bass output on the LC2i into the amp. First annoyance is that both the LC2i and the amp have knobs that control the bass. I’m not sure if I need to have them both plugged in and then find some synchronized levels. Because I’m not using a remote wire from the head unit, I am using the GTO option on the LC2i and that seems to keep everything powered properly. I am also using the remote out on the LC2i to the remote in on the amp. Last settings for the LC2i are the load select which I have at 20kO and the bass output level which I have in the middle. I didn’t do anything with the accubass and just have them at the minimum. As for the amp, it has a setting for bass boost which I have off (0DB), low pass frequency which I have set to allow all low frequencies, high pass frequency which is set around the middle which should give it a cap of around 100hz, and then it has the RCA input from the LC2i. As mentioned before it is connected to power and turns on without issue. The output it has are 2 + and 2 - speaker terminals that appear to be jumped inside the unit according to my continuity test so I only have 1 12/14 gauge wire (not 100% sure which it is) connected to those and then to the sub. In relation to the video, the amp is turning on. RCA is showing an AC voltage. I am detecting a signal from the speaker wire. At this point I can hear a faint sound coming out of the sub, but it is extremely quiet. I am hoping there is something obvious I am doing wrong. Again, this is my first time wiring this up and I basically did it from your videos and reading posts on Reddit/the internet. I would easily pay someone to do it for me but no one will touch my car as it’s a 2022 and there is currently no public info on it, even cruchfield is blank. So any help would be greatly appreciated!!
@fatyMuthaFucknBiscts
@fatyMuthaFucknBiscts Жыл бұрын
1 wire to the sub? Check your sub wiring and ohm load. If it's right then just bypass all the lci shit and and send a signal to amp then sub. If it's still not working and you have votlage at the sub wires your shit is blown
@buddywenner9774
@buddywenner9774 2 жыл бұрын
My voltage at my speaker inputs on my subwoofer amplifier are about 12 volts with the gain all the way turned up what could be the cause of this? It used to go higher than that could it be my alternator going bad?
@Luis92r
@Luis92r 2 жыл бұрын
Hello I have a 2012 bmw 528i with a regular Hifi system i replaced the amplifier and my bass returned for one day and left again do you know what the problem might be if it's not the amplifier.....really sucks not having music
@viscarrasboys3409
@viscarrasboys3409 2 жыл бұрын
I have a question what do you think of the is this a good speaker for someone new to (audio car systems) Rockford Fosgate Punch P300-12 600W Peak (300W RMS) Class-D Amplified Single 12" Punch Series Subwoofer Enclosure with Remote Bass Level Control Included
@raymond83111
@raymond83111 8 ай бұрын
What do I do if something is wrong internally with the amp and no voltage coming out of the speaker terminals
@jeankutzer1556
@jeankutzer1556 3 ай бұрын
My amp doesn't come on and it's getting power. Fuses are ok but nothing. Internal issue? I guess it's garbage time.
@chrismiller7515
@chrismiller7515 Жыл бұрын
What if you do the RCA check with your phone and a 35 mm Jack and you don't get any sound
@danielcarter7657
@danielcarter7657 Жыл бұрын
Learn something new errday, I wonder if the T5002 amp needs Audio input to turn on.......
@MohamedAli-vj4ln
@MohamedAli-vj4ln 2 жыл бұрын
Hey can you recommend a straight edge router guide kit? Thank you
@codymcdevitt8788
@codymcdevitt8788 Жыл бұрын
Thank you so damn much man you saved me my wire that turns the amp on was not getting power and it fixed my system I was so sad lol I had just bought 2 15s to
@nuhtrbuhtr2139
@nuhtrbuhtr2139 2 жыл бұрын
I just recently got two JL audio 12s, lc2i pro, and a jbl amp I love them but every time I accelerate in my car it makes a terrible rumbling noise almost as if the sound of the engine is coming through the subs, I’m very new to car audio systems and I’m not very educated on how they work. The only time the sound gets slightly better is if I turn down the bass completely which pretty much defeats the purpose of the subs. Does anyone know what may be the issue and how I could fix it?
@kaydendiamond9623
@kaydendiamond9623 Жыл бұрын
Um my ground unit isn't hooked up the my battery could that be why?
@noureldinmohamed2945
@noureldinmohamed2945 2 жыл бұрын
Hello dude i would ask a question my amplifier nakamichi 3000watt 4 channel i used ch1/2 for four 4ohm speaker 6x9 and 3/4 as bridge for my little subwoofer and it can run 2ohm so how could i wiring my 4 speaker as 4 ohm could it happened and what if i wiring to 8 ohm dose sound would be less louder Best regard ❤️
@kadebowman2608
@kadebowman2608 Жыл бұрын
okay so i fixed the melting wire within my speakers i had amp working for some time but now my amp only try’s to click on and it won’t start
@derekaaustin
@derekaaustin 8 ай бұрын
I have a problem with a salt 6 that has very little play time on it. It will loose signal through the rca inputs within a minute of play time. I switch my rca cable to the slave input and it works fine. And sundown Audio tested it and said it works fine. I've never had this problem happen before. Basically this amp only works in slave mode. Anyone out there could give me some advice on what could be the problem.
@chuckfranklin6250
@chuckfranklin6250 2 жыл бұрын
I love the audio control amp I have, but when I had it professionally installed using the gto it fried the battery in my wife's 2020 Jeep. And it is actually the same amp being used in this video. So in new cars w everything integrated into the stereo, be careful. Every time the key fob was used, doors open, etc, it was powering the amp on.
@CarAudioFabrication
@CarAudioFabrication 2 жыл бұрын
That's honestly more of an install issue. The Wranglers are pretty straightforward for a remote turn on lead, so not sure why GTO was used in the first place.
@chuckfranklin6250
@chuckfranklin6250 2 жыл бұрын
@@CarAudioFabrication it was in a compass. I was trying to prevent the guy tearing the dash apart. I'm not saying that the guy didn't make some sort of mistake. This was just my experience with it.
@peaceturtle11
@peaceturtle11 2 жыл бұрын
i have subwoofers on amp other speakers are powered by player. for long battery life i have put an on off switch to remote turn on wire so i only turn on the amp when want to listen it loud with subwoofers.
@emiliosanchez1065
@emiliosanchez1065 2 жыл бұрын
Speaker wire terminal connection to sub enclosure type/brand/name/link please?!🔥🔥🔥
@rafaelmorales4545
@rafaelmorales4545 2 жыл бұрын
How do you deal with the chime ordeal with 2021 Silverado’s? I’m going to do 2 amps subs and speakers all around with a audio control dsp 608 I believe.
@user-bf6tm6my5b
@user-bf6tm6my5b 6 ай бұрын
im having an issue with a car i bought. dude installed a cheap chinese headunit (which i think is my problem) and a hifonics bg-1300.1d amp with a skar sdr-1x10D2 sub. its all new, amp has power, but isnt receiving signal from headunit. problem is its so cheap i cant do any reaearch. its a 7" touchscreen that was probably around $75. anyways. ive tried all RCA outs on the unit and still nothing. It has a sub, front and rear LR and line in LR. cant get any noise though. any thoughts?
@jiddeyjiddey
@jiddeyjiddey 2 жыл бұрын
Hi CAF! I am in the market for some hard hitting bass and im considering buying the sundown SA15v2 2D. Any thoughts about it? Maaaybe a little vid-review?🥺 Love your vids, keep up the good work!😍😄
@jeanjacque1577
@jeanjacque1577 Жыл бұрын
Im 9 volts between the ground and remote . The wires are 2 different guages will that cause the issue?
@amandazimmerman5128
@amandazimmerman5128 5 ай бұрын
The power & ground wire have to be the same gauge(ex:both 4gauge)…the remote wire will be smaller(ex:18gauge)
@iluvteck
@iluvteck Жыл бұрын
So my audio is working but the amp and sub is not powering on what is the cause of this
@danieleferrari8412
@danieleferrari8412 Жыл бұрын
will this work for a 2013 s350
@karthikeyan-lv5on
@karthikeyan-lv5on Жыл бұрын
How to connect the fuses and not needing them, actually!?
@vijairampersad155
@vijairampersad155 2 жыл бұрын
Shout out trinidad 🇹🇹 🙌
@RedbridgeHomes
@RedbridgeHomes 2 жыл бұрын
Mark, thoroughly enjoying your video's. I have an unusual one for you. I have a Kit Car and no audio installed. I am looking to have a four camera dash cam too. What is my best way forward?
@CarAudioFabrication
@CarAudioFabrication 2 жыл бұрын
Would love to help you pick out gear. A consultation can be started here: www.caraudiofabrication.com/consultations
@Jamie06340
@Jamie06340 2 жыл бұрын
Don't forget some radios have a remote turn on and a power Antenna turn on if you're hooked up to the power antenna the amplifier will only work with the stereo in the FM or Am position
@illestmortal
@illestmortal Жыл бұрын
What do u mean fm or am
@ryanfunk3891
@ryanfunk3891 2 жыл бұрын
I have checked everything on mine everything checks out. The only thing I can come up with is the high output alternator from js alternators I have is keeping me at a steady 15.5v and that is too much for the amp which is a kicker ca1200.1. Can you do a video on a solution for this issue or does anyone have a solution for this?
@fosholyfe6115
@fosholyfe6115 Жыл бұрын
Your amp should be wired to/pull from the battery, not the alternator... The alternator puts out more when the engine is under load, idle is 15.5... the alternator is to charge the battery, the battery runs all the electronics/lights, engine start, ect... Not the alternator.
@midnights_sun
@midnights_sun 8 ай бұрын
My problem is that I can measure power on the wires before connecting them to the amp, but after connection the power is below 2-3 volts. All fuses are good 😢
@boldlionpro2814
@boldlionpro2814 7 ай бұрын
Bravo! Thank you for the tutorial
@poinsettias
@poinsettias 5 ай бұрын
Thanks
@perez2451
@perez2451 2 жыл бұрын
Where you guys have a shop ?
@jimlovy7587
@jimlovy7587 2 жыл бұрын
Greetings, anyone out there would know where to run a 4 gage power cable from under the hood to inside the car in a Mitsubishi outlander V6 to power an aftermarket amplifier. I can't seem to find any passage or manufacture's pre drilled hole to make it work. Anyone has a recommendation?
@850CANE
@850CANE 2 жыл бұрын
Hi there! I have a question. My preamp outputs on my aftermarket head unit are 2 volts. Does more voltage equal more power out of my amplifier in any way? What can I do if so? Thank you!
@danielabrams555
@danielabrams555 2 жыл бұрын
The amplifiers gain control is used to set the amplifier up for the correct signal input voltage. You will need to use more gain with a weaker input signal. When tuned properly, there will not be any difference in amplifier output level regardless of the signal input level. The advantage to having a higher voltage signal is an improved signal to noise ratio.
@850CANE
@850CANE 2 жыл бұрын
@@danielabrams555 thank you very, very much!
@edwardhood6252
@edwardhood6252 2 жыл бұрын
One way to get a higher voltage on your preouts is to use a " line driver " which, Mark has reviewed one by AudioControl here on this channel. While, as Daniel said, the higher voltage won't make your amp any louder, it WILL however make your overall sound quality MUCH better.
@rajionarscott8834
@rajionarscott8834 Жыл бұрын
My eq is not sending out any single to the head unit and I know that it’s getting the signal from the amplifier
@Jimmystayfly
@Jimmystayfly Жыл бұрын
Great info! Fixed my problem
@tyte90
@tyte90 2 жыл бұрын
What if I have almost no output from my amplifier all of a sudden? Is my amp toast?
@carlosgomez_c137
@carlosgomez_c137 2 жыл бұрын
A couple of tips. Amp fuses should be tested out the amp, or the multimeter could be damaged. If you want to test them connected to the amp, a better way to do that is by checking them in high current mode, as an amperimeter, 10A in most multimeters, and set the volume really low. If a fuse is blown, when you connect the amperimeter the circuit will be closed by it, turning on the amp. If fuse isn't blown, the meter will just show 0 Amps. To check remote speakers wiring, even if they have any kind of filter, we should just disconnect them from the amp, and set the meter in ohms. If meter shows infinite value, speaker may be disconnected. If don't, we have two possible chances: if it's a low frequency speaker, it should show a low value on ohms, because if it is even filtered, low pass filters should have low impact on impedance (coil resistence). In a mid/high range speaker, we should have much higher resistance, but never an infinite value. And to check speaker wiring, oldstyle way, is using a 1.5V battery (AA or AAA) or even 9V in high power speakers. By fast connecting/disconnecting the battery directly to the speaker we should heat little "toc" noises from the speaker, if it's ok. Please don't use any power supply or car's battery to do this, DC is really harmfull to speakers and we need to use a low volt, low current drain battery just to fast checking, higher voltages or high amp capabilities will end blowing your speaker coil.
@heavychevy4616
@heavychevy4616 2 жыл бұрын
always enjoy ur vids dude. thank u
@benediktschluter7313
@benediktschluter7313 Жыл бұрын
That helped me, thx!
@treyporras08
@treyporras08 2 жыл бұрын
Another great troubleshooting video! Thanks mark!
@petergetinard4811
@petergetinard4811 Жыл бұрын
Have you ever had a car audio system that works fine while parked but when you put the car in gear and start driving the audio stops working. But then when you stop the audio comes back on?
@madeleinewestbrook9228
@madeleinewestbrook9228 5 ай бұрын
Maybe a new battery; or alternator problem?
@JaRuuizz
@JaRuuizz 3 ай бұрын
Did you get bit a cat? What is on your hand
@rajionarscott8834
@rajionarscott8834 Жыл бұрын
It’s a new eq never been used
@michaelspies8735
@michaelspies8735 Жыл бұрын
And my wires are all correct
@MrMister1227
@MrMister1227 2 жыл бұрын
My speaker speaker burned out, terminals burned saw smoke come out, now my amps channel that was going to that speaker doesn't work 😵
@Vindoublediesel
@Vindoublediesel Жыл бұрын
Dunno if your gonna read this but ik having an issue, Not sure if its a fault or what im about to buy one of those metres to double check, But do you know anything about the amplifier, just flashing a blue light (ussually it would stay on consistantly) but it turns off imediatley, Showing it had indeed got power running to it, Is this possibly some sort of error or power safety mode? I am gonna be honest I got impounded and didnt take me subs out all me wires got cut and there was a bit of water on them, Im assuming its toast but if theres hope, There is hope, Also I cant buy dual channel amplifiers this type anymore its a sonly explod dual chanel, If you need more info or if anyone can help Id appreciate any advice
@wesleybroughton6147
@wesleybroughton6147 2 жыл бұрын
If that a zombie bite on your hand 😳
@randallbaker9055
@randallbaker9055 2 жыл бұрын
What happened to your hand
The RIGHT WAY to wire subwoofers to a monoblock amplifier
5:50
CarAudioFabrication
Рет қаралды 1,1 МЛН
Amplifier Cutting Out? Protect Mode? No Sound? Test these!
10:50
CarAudioFabrication
Рет қаралды 429 М.
Violet Beauregarde Doll🫐
00:58
PIRANKA
Рет қаралды 48 МЛН
Dad gives best memory keeper
01:00
Justin Flom
Рет қаралды 20 МЛН
Dad Makes Daughter Clean Up Spilled Chips #shorts
00:16
Fabiosa Stories
Рет қаралды 6 МЛН
Avoid these 5 common Car Audio NOOB Mistakes!
10:41
CarAudioFabrication
Рет қаралды 4,8 МЛН
Things to check if your car stereo is not turning on
7:21
JPtheinstallguy
Рет қаралды 705 М.
How to Troubleshoot Your Car Amplifier *Tech Time Thursday*
20:11
Unofficial Audio
Рет қаралды 92 М.
4 Mistakes that Kill Bass - Car Audio Subwoofer Improvements!
12:06
CarAudioFabrication
Рет қаралды 4,7 МЛН
Car amplifier fault finding - Sundown SAZ-1500D Repair
30:34
barevids
Рет қаралды 161 М.
Speaker Sounds Awful or Not Working at All? Diagnose Speakers in Your Car or Truck!
7:13
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 347 М.
12 inch Subwoofer Build | 24Hz Deep Bass Enclosure | Timelapse
18:25
AcoustiNoob
Рет қаралды 4,5 МЛН
Violet Beauregarde Doll🫐
00:58
PIRANKA
Рет қаралды 48 МЛН