200cc Shifter Kart FIRST RIDE

[@CarsandCameras]

This could be the perfect racing go kart! What do you think?

[@kilejudy9190]

yes!

[@jcl39907]

CarsandCameras yes it would be

[@JarredRandom]

Drive it like you stole it

[@dream2sea]

Perfect, awesome!!!

[@shithead1426]

CarsandCameras get a 8 ball shift knob then get a old Hurst shifter

[@tonypritchard777]

My favourite about all of your projects, is the way in which you both work together and don’t use foul language ! Super interesting, keep at it 👍🏻👍🏻👍🏻

[@cavemanvideos3343]

Use an old piston out of a weed eater for a shifter knob

[@Ratkill9000]

Get some heavy duty RC servos and rig up a way to use them for shifting and have your paddle shifter

[@DerickBroadnax]

You could possibly use door actuators to shift electronically.

[@BuzzLOLOL]

Mercruiser forward-neutral-reverse shifters have a switch that momentarily kills the ignition while shifting the dog clutch...

[@pauls466]

You have to be able to shift up ad down , so you need 2 . guess Ratkill 9000s idee is the best one

[@joeshmo2473]

Better idea: put a semi auto 5 speed 230cc 4 stroke. No clutching required its a centrifigul clutch so all you do is let off gas and shift then get back on the gas. Thats what I'm building now. The semi auto is the way to go

[@potrzebieneuman4702]

@IndyHelis after riding motorcycles for most of my life I know that blipping on the downshifts is needed to "nicely" downshift a constant velocity gearbox hence the kit doing this for the user. Also upshifts can be done without the clutch by simply timing the shift to slip through the slack between power on and power off. You get used to it after a while.

[@GumpterCrayon]

That thing is insane! I'm currently building a shopping cart go kart with a 250cc and I'm so stoked to get it finished this summer

[@mattcaudell9972]

Definitely needs a beer tap handle mounted to the floor on a pivot and a linkage to the shifter spline. Oh, I'm not sure if anyone has said this, but once you get a solid shifter setup you shouldn't need the clutch to shift - just let off on the throttle. Awesome build!

[@judahsears4463]

y'all best be careful... could have a heart attack from the excitement of all THAT low-to-the-ground SPEED! YEEEEEHAW!

[@msaber1797]

race this thing against the 670 dragster this thing looks fast af

[@rew2866]

The entire build has been awesome, taking a good go kart and making it great!

[@SmOoThYwOoDy]

My favorite part of this video was when you said that the rail cart was built to heavy. I thought that every time you guys would weld more 1/4 inch plate on. But it is still a very bad ass dragster. Not many would have even tried to build one, including myself.

[@rhyswerner8749]

So excited for this video! Love the build guys

[@kyletisdale4310]

Behind a small Chrome cap is an oil filter screen held in by a spring it needs to be cleaned out every oil change. Adjust the needle and put in bigger main jet 2 Fix flat spot. Worked for me.90mph? Love the build keep up the good work!

[@hjc4552]

Do a 3D printed Ricky bobby shift knob Because the 9 reasons for an old go kart vid u drifted round with Ricky bobby edited on ur face

[@h.weaver3397]

Eurobeat Ike already looks like Ricky bobby😂

[@hjc4552]

Mini Mechanic ahhahah

[@jesondag]

Someone sends me a model, and I'd be happy to print it for you.

[@edwardscissorhands7550]

@@h.weaver3397 on baby Jesus

[@renegadethesandwing02050]

i just put a screwdriver handle on my shifter yesterday, its a really cool looking transparent blue and looks sweet, its a "vaco duh4" for anyone wondering

[@kristinhanna93]

Adjustable fuel pressure regulator's are cheap on Ebay.

[@mopardude6969]

Exactly what i was going ta say!!

[@chawizaud]

My favorite part is the way it revs up and down like a race car. There's practically no time at all for it to spin back down to idle and I think that's just one of the coolest sounding things an engine can do

[@MrRamAir1]

Y'all should put a turbo on there for testing purposes only it will be fine

[@blakeroyston3069]

Bigchevy White its a lot of work for 2 pounds of boost

[@luissantiago2515]

Boosted boys has a go kart with the sane engine i think and hes planning to boost it soon

[@MrRamAir1]

Blake Royston , it's the thought that counts but it will be cool

[@PaulDWeber]

ANYTHANG 'S POSSIBLE ??

[@PaulDWeber]

WHY ONLY 2LBS ? why not 5

[@troycrowder9942]

i got a kick out of the look in youre eyes when you opened it up i had to try and warn you guys that motor has a lot of power on the low end not for the untrained it could kill someone if they lost controll great job you guys man that is cool as hell well you know what i mean i like it

[@mikestefano7198]

This made my shitty Monday better

[@pollyg562]

my fav thing is how it makes you two smile,i cant wait 2 c the bugs worked out,which is only natural to have quirks in any new build

[@50plymouths]

Beer pub handle

[@nasmitty5261]

Guys, I have to say, I try and watch some Red Headed Jaw buddies but I just can't anymore. Keep up the good stuff and I never feel the need to fast forward when I watch your channel. Don't ever previously on pipe tube garage tv yadaya. I know you won't respond but keep it to heart. Love you dudes.

[@isaacitllbefine7231]

John V thanks. We try to respond. Lol

[@matiasasmussen1804]

You guys Gotta do a 2 stroke go kart at some point 😉

[@davidmoore7647]

Agreed

[@WorkingTitleCo]

nah they are way to screamy ahahah

[@matiasasmussen1804]

Ben Mcevoy they cant be

[@E46_slidin]

Matias Asmussen They should totally do that

[@nolansprojects2840]

They were going to when ike bought the kawasaki, but then he liked the bike so the kept it!

[@osalva212able]

Hey guys I'm from Costa Rica and we here have those specific motors here for almost every motorcycle, I mean, the motor is exactly exactly the same one, since those are some pretty good motors there are a LOT of replicas down here, and Also people heavily modify them, again in a motorcycle, but I have seen some people that changes the piston and the lever the valves and I even seen people put a 70 mm piston diameter on those... they made up to 26 hp, once again in a motorcycle... think about that in the weight of a go kart, there is So much room on those motors to modify you guys will never think about IT...! Excelent Work by the way :-D PS: my own motorcycle I have Rev it up to 12,000 RPM with the original Taq

[@janeames1513]

John after you got it loose in the upshift it looked like you were due for a new set of shorts..lol...that was grand..this thing looks wicked fun

[@CarsandCameras]

We took it out for speed testing yesterday, the 4 to 5 shift is SKETCHY

[@ethanpotter9396]

Best build yet👌🏼

[@jmachMega]

Don't need to use the clutch all the time, that motor has a sequential gear box, to upShift just ease off on the throtle and pull the lever. Downshifting it is best to use the clutch or you will start to break things. Looks great fun to drive , keep it up guys.

[@colinboublik8305]

What motor are they using?

[@brockbain8656]

Honestly just wanna say ive always been a fan but your production quality and editing lately is fucking killer!! Like... the transitions, audio mixing and even angles used. So much thought put into every aspect of these videos

[@mcdoodal1993]

The 72 mile go kart and the 200cc go kart needs to go riding.

[@wickedmc4692]

Man u guys have came a long way sence i subscribed i really like thoses hoosiers on this build very clean

[@Nunya_Bidnez]

Just make it paddle shift. Its out of the way, more comfortable, and much easier to use. Also you don't have to take your hands off the wheel. I know its not as cool but its so dangerous with a suicide shift. Yeah but whatever.

[@ClassifiedRecon]

NUNYA BIDNEZ that's how shifter karts are tho, with a shifter stick

[@ionstorm66]

Its not a suicide shifter. Its a suicide clutch, because you had to keep your foot on the clutch and your other on the ground. People would start to tip to the left, take their foot off the clutch and get launched into traffic.

[@FallenDj122]

i honestly think you guys should go with paddle shifters first because of comfort second because it'll be easier to tell what gear your in, but still a totally badass build, i love watching the things you guys make, it's insane

[@funkadidgerous]

Diamond plate still works. Paint it flat black if it's too much bling. How about a very short shifter lever down by your right hip or thigh? Will the shifter fit between your legs? Am I getting too personal?

[@AdamsWorld84]

Awesome work guys!! sounds mean when you go through the gears, i'm almost having as much fun watching!, please rip it up some more!!!

[@TeethRider]

You need to just get a shifter like a shifter kart, they have made that shifter to be the most useful it can be, having your elbows tucked close to your stomach is the safest and most efficient anyway. If it was me i'd be copying what the pros do.

[@wmgkle]

Suggestions for your shop. bolt the vice to something heavy. bolt the bench grinder to a bench. when plasma cutting the diamond plate cut from the smooth side. Suggestions for the 5 speed killer cart larger sprocket on the axle. This will give more of the line power and you probably don't need as much top end speed If the diamond plate is too flashy for you paint it and then scuff off the paint on the pattern. heat shield on the motor Great videos. Billk

[@derrickconnerproductions6007]

Beer tap shift handle

[@robertjames7869]

Looks like a lot of fun. Hopefully you can find a really large place to stretch out the legs of this. I for one want to see that video sooner rather than later. Enjoy

[@dave1135]

If it will hit 120, I recommend finding a wide open road. Loosing control at high speed fiddling with that shifter and slamming into one of the multitude of trees lining your road could be disasterous.

[@dave3883]

I love how it looks going down the road!!!

[@jongalmiche1320]

you should have a sawed off shot gun as the shifter!

[@miguelherrera6622]

John your face 9:29 😂😂😂 another good one guys!!!

[@bassonabudget2k899]

what happened to the rat rod riding lawnmower?

[@willtrautman6243]

Erick Marcelino a 200cc 5 speed happened

[@CarsandCameras]

It kept breaking and got parked. We will probably start from scratch if/when we do another lawn mower build

[@bassonabudget2k899]

CarsandCameras Thanks for answering keep up the good work the content is funny and informative love the channel

[@nickj1289]

200 cc. Shifter cart bad ass probably one of my favorite builds . .. it's not over kill but fast it's great .you guys go want to see more build's

[@ricklivingman8870]

I like everything, if i were to change 2 things would be a removable steering wheel. Make it easier to get in and out.

[@erickennedy1315]

whats the other thing?

[@nashguy207]

My favorite part is the whole build. I love it. Can't wait till it finished and you get it on a longer safer road and get to open it up and see how fast it goes. Need to get it on a track oval or road course would be better bet it handles like a dream. See you Wed God Bless!!!

[@sizableschreib1758]

Should have used a bigger engine and put it on the dragster, the dragster is weak for how much you put in it.

[@davidchristian7899]

It isn’t weak it’s just wrong gearing

[@johnscheid1433]

Make the dragster a 2 speed like rather b welding makes

[@michaelangelod5008]

Nick Zaugg the dragster won't even be able too keep up with this shifter cart

[@michaelangelod5008]

670cc predators are junk they only go 40mph stock and are a waste of time this shifter cart could go like 70mph or more stock

[@CarsandCameras]

The engine isn't the problem, it's just too heavy

[@davidtappe5337]

Great build guys. Keep it up, eventually you will end up building a crossover of mini drag, mini bike, 4 wheeler, mini race kart and rooster.

[@bloodbathory4055]

You guys are great This build is sick and the grim reaper scythe shifter would be sick. also please dont EVER disable your comments like roadkill did. \m/ CarsandCamerasrules \m/

[@dream2sea]

Blood Bath Fortunately, 99% of C&C are helpful/positive!

[@karldavies2954]

Legitimately cannot wait for y'all to open it up!! I predict 90mph coming with a lower rate pump. Love your work guys from the good old UK.

[@alpha1killfast]

make a shifter out of a wrench or tool of some kind

[@mattslawncare5651]

alpha1killfast that'd be perfect everyone pin this!

[@randomrcprojects3754]

1 inch wrench would look dope

[@TrojanHorse1959]

Cool! That's going to be an EPIC cart, John! Now get that thing tuned and get it to a high-speed run area ASAP!

[@harrisoncoulter1]

Try putting a 250 ninja motor on a kart...I did 😂 talk about scary.. 39 horsepower on a 150lb go kart

[@twiz8789]

I just found a 250 ninja for $800...gonna make a lil rock buggy out of it

[@PedroHenrique-ih1fl]

there are +50hp shifter karts

[@Miguelmedina22]

I have a Suzuki gsxr 750 engine +130hp efi that I was thinking of using on a go kart but I think I would go crazy and end up crashing I looked into bigger 2 seater off road go karts maybe would be better suited for a big engine

[@IamGrandx]

Hayabusa engine dude

[@harrisoncoulter1]

I have a liter bike engine I am going to build something with.

[@ejs6097]

Holy S***! Very exciting terrifying video today!! Good progress, & not going to lie, you guys scared me a bit. : / (Fresh cold tires, speed, trees... Yikes!) You have out grown your shop, & that driveway just got too small! I was glad to hear that you guys have also realized this... I can't say much more than that w/o this sounding like i am on a rant. (not what i am trying to do) So in short i would just like to say to be smart, be safe my dudes! I have grown fond of your videos. Hate to see any one get hurt #1! Also, I need fresh videos, so yeah... Don't get broken ; P Anyway, enough with all that... Again, Holy S***! That's all I can say! The beast lives, and it is pissed off! Looking pretty dang good i might add... Can't wait for more updates!! (Ike revs the cart! Is it bad that i was like ohhh, here we go! This is about to get good! Breakage coming in 3-2-1- tick tick tick... Like clock work : D Not laughing at ya man, but that was entertainment. Glad it was simple enough. : ) Till next time!

[@dream2sea]

EJ S True dat.

[@austinwalton6189]

Use a camshaft for the shifter! If you need one I have a couple I can send you!

[@austinwalton6189]

I have 2 old 4AGE camshafts. I can tap one out to M12x1.25 at the pulley end and throw a shift knob on top of one for you. Then just cut it down if it’s too long and make it work 👌🏼

[@mattslawncare5651]

That shit would be Soo heavy tho they said they want something light but that's a rad ass idea that'd look crazy

[@austinwalton6189]

Clorox bleach they actually aren’t that heavy

[@kertwhite6214]

Way to heavy.

[@SuperPeterpaan]

Superb! Colour is dope too!

[@seppeevers8784]

i think its better then the dragster

[@BIllMcCambridge]

Plum crazy cart!!! Super cool!!

[@paulcondie9932]

could maybe made an aluminum frame? In fact while you guys were building the rail I was worried about the weight!

[@paulcondie9932]

IndyHelis oh hell yeah, it's sweet. I only commented again cause they said in the video they agreed how heavy the rail is. curious as the actual weight?

[@paulcondie9932]

At least these guys git er done! 3dmachines not so much! everything he builds is a fail. only thing he really even succeeded is the new yamaha n he didn't build it just rebuilt it. drift car, fail! gator, fail!snow bike, fail! etc....

[@KingsColas]

What do u mean? He finished he snow bike, the half skateboard/engine thing he finished. And it ran mint. He scraped a few jobs because he is a solo mechanic and he cit his losses so that he could bring in better content. They were good ideas, but the bmw failed and generally people do not want to watch someone figure out how to fix something thats not worth fixing.

[@paulcondie9932]

KingsColas the snow bike broke first time out. that's what I call a fail! skate board thing, you can buy one! he just modified one! wtf, bmw might not be what you wanna see but failed! Gator, fail! want me to keep going? lmfao And if him being a solo mechanic is an excuse, it's a poor excuse. I met him at the youtube callout n he is a cocky Lil fuck in my eyes that's not worried about know body but himself!

[@q......]

My favorite part is you actually doing a shifter cart build. i have been saying it for a while now when you asked for suggestions.

[@brettcossman7904]

Put a 250cc version on a yerfdog spiderbox it will do 70mph

[@E46_slidin]

Brett Cossman they should put a CRF 250r in it

[@brettcossman7904]

He'll ya my bro put a 1990 crf250r off my dirt bike on a lawn mower scared to get it over 3rd

[@Branoden1187]

The channel is Cars and Cameras make a shiftier handle that looks like a film reel wrapping around the shift arm.

[@TheOsiris147]

u guys should get some race suits, neck braces and better helmets if u dont have any already now that ur in the big leagues lol id hate to see u one of u guys thrown from that kart and badly injured or killed. great build guys keep it up!

[@uniqueone2731]

I have a good friend that uses a flight simulator joystick for a pc for his shift Handel... looks and works great... he took full advantage of the extra buttons for his kill switch and pump... just a thought could be nice. Thank you guys for the channel it’s so fun and I am still learning a ton from you guys

[@thatalabamaguy9727]

Bring back ikes adventures please!!

[@michaelbriggs5737]

He has his own channel

[@douglasdailey5998]

I liked it all except the shifter, great job guys .

[@davyvanveen6106]

You guys should do a toiletbrush shifter

[@DW-co3vv]

The best part about this project is, that i had this idea for 23 years. A go kart with a motorcycle engine and Transmission. My girlfriends dad said that it is imposable. the only difference is, that i wanted to build it with Suspension. great job.

[@Opelkadettgsi2000]

Shift whit out clutch

[@nathanbutler8240]

Marko Jacobs idk if they know how to do a no lift shift

[@mingusbreeze]

Another nice kart guys. I can't wait to see what it will do.

[@sihtosoveltaa6936]

Do i see a YELLOW CT70?

[@sihtosoveltaa6936]

And you should use a bike lever for clutch in the gear stick unless you want to do clutch kicks then no

[@Aaron-cb7xg]

Yep I saw it too

[@drummerboy3377]

Ike bought it. It's on instagram

[@gfrankum63]

Ike did a live feed last week and mentioned the yellow CT70. He bought that one, and got a parts bike to boot. kzbin.info/www/bejne/Z5ukYYqsbd2Mq9U

[@Lance_59]

I like the purple on the frame and the way it sounds

[@slamboy66]

After first gear don't use clutch

[@wildman4532]

My dad and I restored a 1928 model A Ford. When we finished I had a 8 ball drilled for a shifter knob. It was awesome.

[@tombenes4461]

You need to put on a RPM gauge 😎😅😭👹👿👼

[@dream2sea]

Tom Benes I’m giving this a thumbs up just based on your use of emojis.

[@kidguxxi5]

my favorite is a video from u guys lol u guys are awesome

[@gt20modding88]

Diesel kart!!!!

[@rcfundyer5739]

That is the coolest go cart bad ass looks and sounds like a beast keep up the good work

[@IamJoeTV]

Gear lever and clutch lever should both me under the steering wheel. Having the 3 pedals so close to each other is sketchy and not really safe. Also with both levers under steering wheel you gain more room to get in and out of the kart.

[@pman1335]

I am Joe how are they gonna grab both while shifting

[@fan1701]

Looking good. That thing is gonna be a blast when you get the shifter worked out.

[@JonMarHannah]

This cart is not done. You have lots of refinements to do to make it good. Should be plenty of videos left in it. Spend some time on it. get it right.

[@kartingkid714]

Jon Francis have you seen cars and cameras??!?!?!

[@RC_Trailblazers]

Lol no he hasn't. 😅this channel doesn't make every kart perfect. They just like to have fun!

[@PhaQ2]

Mustie1 just picked up a yerf dog and a seized 9 horse. Should be a fun project to watch his progress.

[@mikee5208]

I'm surprised no one has said dildo shifter. Lol jk cool build, I think whatever you guys come up with will be awesome!

[@mitommy3430]

D!ckshift!

[@murphragous]

New meaning behind MANual transmission!

[@karriebhurgari3933]

MITommy good meme

[@SIXPACFISH]

Way too Gay.

[@bubbalee82]

Love this cart!! I think that you should definitely have some kind of race suit or leathers and boots and gloves when you open it up. And glad you were wearing a real helmet during the test drive. Can’t wait till next video on this cart!

[@NWLee]

Dudes! move the seat, this is the best project yet!!! Gonna be wicked-fast, swee-eet!

[@samwisegangy4579]

That's a nice new intro best intro yet keep up the good work

[@dukecityminibikes7701]

Bucket list for off road karting should be the Mesa of Albuquerque New Mexico. Sickest!!!!

[@Woundhound]

but that buck haha, the diamond plate is super classy. the five speed getting it up past my old escort is my favorite part.

[@brittanibolleter7210]

I think they are all perfect in there own way.

[@redneckkarts4282]

I cant wait to see the Ducati kart!

[@Tazounds]

I love the build! I don't care for that shifter but I love the build!

[@MaxsGarajMahal]

Shifter paddle behind the steering wheel would be my suggestion.

[@gregoryrascoejr6980]

That kart is awsome cant wait to see a speed run

[@Ingmardeg]

Liked in the First second! Awesome guys!

[@dustinday8590]

That things fast sweet build guys keep up the good work n I agree with ike the diamond plates sick looking

[@DeadBaron]

Dragula sighted! That thing's so badass, really want to build one.

[@thematneil]

Love the new intro

[@bryanputz2076]

man, I love hearing you two laugh hard...like when ya boot it for the first time....or when Ike goes flying up off that hill...O_O

[@addicted2fuel]

This thing looks like fun. Get a inline fuel pressure regulator at your local auto parts store that carries the fuel pumps. You can regulate that pump down to 1 psi if you want to. I like everything about the kart that's my favorite part of it. Keep up the great work fellas

[@spencerandrew8945]

Love the new intro thing