Cavitation on a jet ski caused by sucking up debris
Пікірлер: 18
@dannyrusso82797 жыл бұрын
Great video. I have the same problem, after going over milfoil at the lake. I'm new to jet skis and thought I could idle through it. Now I know better. Your video gives me hope that I will be able to fix the problem, without having to take the jet ski back home from it's slip. Good view of the bottom. Funny, I never crawled under to see what it looks like down there!
@jetson3287 жыл бұрын
Hi Danny Glad that you found this video helpfull, appreciate the feedback. What type of Jet Ski do you have? Rod
@dannyrusso82797 жыл бұрын
2002 Yamaha FX140. Hopefully the intake grate is like yours, and will allow me to get at the debris stuck in there. Going to tackle it today.
@jetson3287 жыл бұрын
OK Good Luck
@dannyrusso82797 жыл бұрын
On inspection, it looked like a family sized tossed salad was sticking out of the grate. Once pulled out, I still saw some weeds wrapped around the shaft. I removed that also, with the bent coat-hanger method. Worked great once clean. Question: will that vegetation around the shaft be blown off once the grate blockage is removed?
@GetSocialButterfly5 жыл бұрын
❤️ your channel brother
@jetson3285 жыл бұрын
Good to hear that
@ryantoomey6115 жыл бұрын
Is there a way to put window screen material over the intake grate to prevent debris from getting inside?
@jetson3285 жыл бұрын
You have a good question about window screen....I would not install window screen or anything else for two reasons the first being that it may decrease the water flow and next it could get sucked up itself into the impeller causing damage. Try to avoid areas with debris etc
@ryantoomey6115 жыл бұрын
Hello, after sucking up debris on my ski it is not same even after the debris has been cleaned out. I lost 5-6 mph top speed, and there seems to be a slight hesitation on acceleration as well as an increased vibration at a certain RPM. Could this mean my impeller is messed up? I do not see any obvious damage when I peeked my head in the jet housing (nothing looks bent, broken or scored).
@jetson3285 жыл бұрын
Hi Is your Impeller possibly bent. damaged?
@jetson3285 жыл бұрын
It will not take much to cause a vibration loss of top end, the fact that you say that you get a vibration at a certain speed would make me think that the impeller has a slight bend in it? You really need to have a close look from the bottom I suggest take off the intake grate first then really look closely at the impeller, housing etc
@JerrycanWanderers3 жыл бұрын
Has anyone rolled their ski over to get the debris out,just a thought.
@c.juneau4105 жыл бұрын
I HAVE A 2012 GTI 130. MY GRATE IS CLEAN, EXCEPT FOR SOME CORROSION, SHOULD I DO SOME TYPE OF MAINTENANCE TO THIS
@jetson3285 жыл бұрын
Your grate is Stainless Steels , maybe wire brush off any corrosion
@c.juneau4105 жыл бұрын
@@jetson328 AWESOME! THANKS.
@ReeseMega7 жыл бұрын
What do you do if you sucked up mud?
@jetson3285 жыл бұрын
I would bring the PWC into shallow water and start rocking the PWC side to side to push out the mud