Center Console Mod - Cup Holder Mod for 96-98 Toyota 4Runner's

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
*PLEASE READ THIS AND THE COMMENT WE PINNED FOR HELPFUL INFORMATION*
This modification is meant for Toyota 4Runner owners that have a model years 1996-1998. These specific models have a different style center console that does not have cup holders like the later years of the 3RD GEN's (99-02). In this video we show you how to remove your center console and replace it with one from a newer year.
**It is very important you get the:
center console
hand brake (e-brake)
tub that e-brake attaches bolts into
bracket that mounts the center console
**Check out this write up on T4R.ORG.
www.toyota-4ru...
*HELPFUL TOOLS*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com...
*Heavy Duty Rubber Wheel Chocks - (to keep your rig from rolling while you have the parking brake disconnected. It's not good to support the weight of the vehicle on the auto trans parking pall, especially when you're at a slant) amzn.to/2mttRWp
*JIS Screwdriver - (used to remove the screws for this job. Japanese vehicles have Japanese Industrial Standard screws and a JIS screwdriver will fit the heads better giving you less chance of stripping a screw head.) amzn.to/31nlP0f
*1/4" and 3/8" Flex Head Ratchet Set - (used the 3/8" ratchet for this job. These ratchets are super functional and will make your wrenching life easier) amzn.to/2ql8nNA
*Stubby 3/8” Flex Head Ratchet - (it use to be available for sale separately but now we can only find it as part of this 4-piece set) amzn.to/39kQVit
*3/8” Drive Regular Extension Set
amzn.to/2OehCao
*3/8" Drive 6 Point Metric Standard Socket Set
amzn.to/32WIh0M

*3/8" Drive 6 Point Metric Deep Socket Set
amzn.to/37iQjVt
*90 Degree Needle Nose Piers - (used this to help disconnect wiring harness clips)
amzn.to/2VYUro8
*Straight Needle Nose Pliers - (used this to help disconnect wiring harness clips)
amzn.to/2pQ6yIa
*20 Piece Screwdriver Set - (used a flat blade screwdriver to bend the parking brake cable tab. This is a nice complete set of screwdrivers if you're in the market for a set) amzn.to/34aLrQ1
*Milwaukee Mi12 Cordless Ratchet - (used this to spin out the trim piece bolts under the steering wheel column. This ratchet will save you time removing and installing fasteners) amzn.to/2utRZsE
*Milwaukee M12 Battery
amzn.to/3FJZO1j
*Milwaukee M12 High Capacity Battery
amzn.to/2HEFTpu
*Milwaukee M12 Battery Charger
amzn.to/2uo2o9x
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates we earn from qualifying purchases.

[@TimmyTheToolman]

*PLEASE READ THIS COMMENT AND THE VIDEO DESCRIPTION FOR HELPFUL INFORMATION* If you would like to see more detail on how to remove the Stereo Bezel, go to playtime 15:12 in our Phone Mounting Options Video: kzbin.info/www/bejne/e4WskoeHhZKrfK8

[@dsimp765]

Hi Tim, I know you have friends everywhere, I'm in Tucson Az, and have a friend that owns a 4x4 shop here and he just got a 2000 Tacoma Prerunner, white, and it suffered a soft rollover and has a lot of cherry parts, including locking diff, good motor and auto trans,etc. We also have a 2000 4runner limited 4wd being parted out locally. If you want the info you can email me. Thanks Tim. [e-mail]

[@TimmyTheToolman]

Big D Simpson cool thanks for the heads up Big D

[@richardshoults8775]

Timmy-thank you for the video on changing out the 4runner center console on the 98 4 runner. Do you recall the part numbers for the 1999 brackets that you used in place of the 98 brackets that you removed? Thanks again.

[@fredjimenez4208]

I have a 97 4Runner, and I'll live with no console cup holder. Great video!

[@TimmyTheToolman]

I'm living without it too in my 98. Glad you like the video.

[@hansdavis9081]

Just did this swap myself, glad I saw this video first, I never would have thought to grab the parts for the bracket and new e brake. Thank you Tim!

[@TimmyTheToolman]

You're welcome Hans. Sean deserves all the thanks though. Sean did all the research for this Sic Mod. Glad you found the video helpful. Happy Wrenching!

[@eljefeslash]

Thanks so much, Sean (and Tim). I so appreciate the attention to detail you guys provide. I had to go back and re-watch a few sections here and there during the process, but I finally got this sick mod done and drove to work with a beverage in my "new" cupholder this morning! I have a 1998 5-speed SR5 and used a 2000 auto Limited as my donor. I'm always a little nervous when cutting around wires and moving them, but everything seems to be working fine after the "surgery." The donor tub - couldn't quite get it to work. I went back and forth on it, but I finally just put my original tub back in, and it works for the most part. I'm just a little nervous because it isn't positioned well to accommodate the angle of the new e-brake, so the e-brake cable is rubbing against the nut that sticks out of the tub, and the tab that holds the line down rubs against the tub when I pull the e-brake up. I use the brake quite a bit since I have a 5-speed, so I'll just have to check on it every now and then (and maybe someday, I'll brake out the Dremel and perform some surgery). Thanks, again!

[@TimmyTheToolman]

You're very welcome. Good job completing the mod!

[@rebelpatriot_nc_9156]

I was just blessed with the newer console and parts needed for this swap (previous owner had them in his garage and was gracious enough to give them to me 😄)

[@TimmyTheToolman]

@@rebelpatriot_nc_9156 stay tuned for another upcoming Sicmods video to retrofit your console’s rear ash tray into a charging solution!!! - Sean

[@TimmyTheToolman]

Have fun with the swap. We have lots of content to help you with your new used rig. Enjoy it!

[@yourfriendgary]

I’ve been following your channel for a month or so now and I love how detained and articulate all of your content is. Although I don’t have a 4Runner (I have a 99 Honda Passport), this video gave me the know how and tricks to move a power drive button from my center console up to my dashboard today. Thanks guys!

[@TimmyTheToolman]

Hey Gary, glad you like our channel and it's good to hear you're still able to pick up helpful tips even though you own a Honda Passport and not a Toyota SUV or Truck. You're welcome and Happy Wrenching!

[@alexkeller8345]

Great video guys! Super helpful, thank you! I just finished the mod on my '96 4Runner. My donor console was from a '99 4Runner and I was hoping that I wouldn't have to trim the body, but I did need to. With a dremel it wasn't too bad. I cut off about 1/4 inch from the passenger side of the tub area, put a few coats of paint on, and was good to go. I think any '96 is going to need the body trim.

[@TimmyTheToolman]

Alex Keller thanks for taking the time to come back to the video & comment with your experience on your 1996. We hope your comment helps others in the future understand what they may need to modify on their rig. Enjoy your new center console with cup holders!

[@Yotapuga]

Were the tubs the same or different 96 to 99?

[@dennishaugland2475]

Thank you so much for your attention to detail in your video. I swapped my 97 console out tonight with a 2000 donor. I had to do a little cutting of the body to get the new brake tray to fit in. Everything worked out great and my wife will now enjoy her new cup holders. Appreciate you guys1

[@TimmyTheToolman]

You're welcome Dennis. We're happy to hear our video helped you get the job done.

[@michaelkelsey1]

I did this mod in my 97 SR5 from a 2000 Limted donor both with the passenger seat rear heater. I grabbed the console, E-Brake handle and the E-brake Tub. During the installed I pull my 97 tub out and put in the '00 tub, but the holes didnt line up and would require drilling out holes. For grins I decided to put back my '97 tub and the handle lined up perfectly. Moving the wiring was pretty straight forward too, 2 of them were a little tight, but wasn't to hard to get it all done. Another good vid Tim! I wouldn't have known to be on the look for this while going through the yards for other projects. Took me 5-10 minutes to remove from donor and an hour or so to install in my rig. Salvage Yard in phoenix charged me total $25 for the console and E-brake parts and accessories. TL;DR '00 limited console install to a '97 SR5 use '97 e-brake tub with the '00 handle and console, factory bolt holes will line up perfectly!

[@TimmyTheToolman]

Great to hear we gave you an idea for a sic mod and it went well for you. This video was all Sean though. He did all the research for this one. I was just along for the ride and did the filming.

[@tbarbin123]

perfect, just what I was wondering since this was a 98...

[@nicolebarnett8702]

So glad I found this video! I can only assume that you didn't care for the 98 cupholder design considering ahead of bumping the spill your drink everywhere. New subscriber I appreciate your time making the video and will be watching for more.

[@TimmyTheToolman]

Hey Nicole, welcome to our channel. You'll find lots of helpful videos on our channel.

[@suthrncomfort86]

Awesome walk through! This makes me appreciate already having a '99!

[@TimmyTheToolman]

I have a 98 and 2000 and there's a good chance I will follow Sean's lead and do this mod on my 98.

[@julioarrecis666]

thank you " SEAN AND TIM " that was the 1rst mod i did to my rig, thanks again for your videos.

[@TimmyTheToolman]

You're very welcome Julio. Welcome to the world of Sic Mods!

[@julioarrecis666]

ill be back from now on!! you guys inspire me with sick mods, thanx again. is it Sean or Shawn? @@TimmyTheToolman

[@Munkeez]

Thank you so much for posting this. So helpful. Going to put some cup holders in my 96 today

[@TimmyTheToolman]

You're welcome Andrew. Good luck with the job.

[@colingraham9379]

Subscribed! You guys make the best 4runner fix it videos. God damn it seems impossible to screw up with that walk through you just gave us. Thanks so much. Can't wait to do this to my 97, right now I wedge my drinks between the console and the passenger seat haha. Also that red toyota hat is dope, I need one!

[@TimmyTheToolman]

Thanks for subscribing Colin and thanks for the nice compliment. We do have quite a library of videos for 3rd Gen 4runner owners and great to hear you appreciate our efforts. Good luck with the mod when you get around to doing it. Happy Wrenching!

[@mhargis28]

You guys seriously rock! Thank you for putting this information out!

[@TimmyTheToolman]

mhargis28 we are not the first to do this mod, we just like to give as much info as possible when showing Sicmods!

[@TheMac801]

Great work! I followed along with this video and did this mod to my 1997 T4R this evening. Worked like a charm. Keep it up!!!

[@TimmyTheToolman]

Thanks and great to hear. We appreciate you taking the time to comment to share your success story with us. Happy Wrenching!

[@courageous78]

Great vid guys. I have a 2000 w/ cup holders already. But still enjoy ur vids and appreciate all your hard work. Just got my T-shirt a few days ago!! Wife took one look at it and said “really”.... I said “SICK MODS WOMAN!” Hey bonus on the gummy worm. My kids would have probably ate that! Lol.

[@TimmyTheToolman]

Wear that shirt proud my friend. The sales weren't what we were hoping for and luckily you ordered a size we already had in stock from a previous order. We were hoping to get over 60 shirts ordered so we could do another run of shirts and get a good price per shift but we only got around 15 orders. So, the people who ordered a shirt size we didn't have got their money refunded. I thought that t-shirt design was rad but I guess I was in the minority opinion.

[@courageous78]

If you guys do shirts again. I’m in. It was the holidays. People were prob busy and little strapped for extra cash.

[@TimmyTheToolman]

@@courageous78 We might do another t-shirt run at some point.

[@allenh7835]

Thanks Sean ! Great job.

[@TimmyTheToolman]

You can call him “Seany the Sean-man”

[@joshuamelendez2967]

Thank you guys so much for the videos it’s gonna help a lot!

[@TimmyTheToolman]

You're welcome. Good luck with the mod!

[@rlnaughton]

nice mod and great job with the video and step by step!

[@TimmyTheToolman]

We're glad you like the video. Thanks for taking the time to comment.

[@Terry-ww9tr]

did the mod almost a year ago an thought i had to extend the wires. i actually tugged the wires under the console and never get back to it. Nice to know i don't have to clip and solder wires.

[@TimmyTheToolman]

Yeah, not having to extend the wires is a big plus for time savings.

[@Terry-ww9tr]

@@TimmyTheToolman hell yeah. Every other video and write up i have seen involves cutting and extending the wires. Also, some feedback from my experience. I purchased the e-break base with the mount and the center console. The new e-brake base didn't fit in the hole. I tried my original base and the 99+ E-brake lined up perfectly with the new console. I didn't have to use the 99+ base. It was a big relief as i wasn't willing to do any cutting on the body. Not sure what year the donor truck was as i purchased the parts on ebay.

[@Rustyshackelford23]

I would kill to do this to my 97 4Runner. My biggest complaint are the damn cup holders.

[@TimmyTheToolman]

No need to commit homicide for this mod. Find what you need at a local wrecking yard and getter dun.

[@han2han718]

Great mod. I have a 1997 4runner. I've never seen this mod and wondered if I could take the center counsel out of a 1999 and adapt it to my 1997. Now that I've watched your posse do this mod I plan to find the correct donor vehicle. I have a blue interior so it's a slight problem.

[@TimmyTheToolman]

Glad you you like the video and good luck when you get around to doing it.

[@ProPilotPete]

Good job hosting this episode.

[@TimmyTheToolman]

It was about time we put Sean in front of the camera. He did do a good job.

[@robfox5562]

Thank you so much for making these videos.

[@TimmyTheToolman]

You're welcome Rob. It's our pleasure.

[@twistingterrain7748]

I have a 99 so I've never needed to do this. It requires more work that I thought.

[@TimmyTheToolman]

It's fairly involved but not that bad of a job at all. The biggest pain is separating all the wires you are relocating from the harness which is a little tedious.

[@lancehenthorn17]

I don't need this mod being I have 99 and 02. I will say it's nice to know about it! Great video even if Sean was the one to do it. Just kidding. Great video. Keep em coming.

[@TimmyTheToolman]

Yeah, I know Sean isn't as good looking as me but the guy knows how to wrench and do Sic Mods, so he's got that going for him. We're glad you like the video and we will keep the videos coming.

[@AntonioClaudioMichael]

Great video guys

[@TimmyTheToolman]

Glad you like it Bro.

[@AntonioClaudioMichael]

@@TimmyTheToolman on this video I'm lucky my 2000 4runner came with this upgrade as of stock lmfao but it is a great video for older 4runner owners

[@justinrobertson1590]

Good job guys! 👍🏼

[@TimmyTheToolman]

Thanks Justin.

[@FixItYerself]

fun times

[@TimmyTheToolman]

Yes it is. Turning wrenches and performing Sic Mods is always a good time.

[@Drupthop]

Late watching this: I have a 1998 5 M/T 4R, I am getting tired of drenching shifter with whatever is in the above heater/ac controls cup holders. So I have a 2001 console w/tub-bracket. Can I use my OE 5 SP M/T shifter center console to new 2001 center console bezel, to eventually mount TEQ brackets upside down U. Also ‘98 only has rear window up/down switch, which I’ll mount inside lower front facing side console opening. ‘98 OE console w/heater slider & cup holder. Thanks Dave

[@chriscollison3136]

Never seen anyone put a tire Chalk upside down the longer section goes down to the ground. Lol anywho just being a dick but sure is a great video like always guys! Thanks I’ve been wondering if I could do this in my 96’ cause mine is hammered and my cup holder is the dash is down to just driver side. Much appreciated for your time and info you put into these videos! Keep er on the road and drive fast and take chances!

[@TimmyTheToolman]

Now you can die happy because you've seen it all.

[@BKTX]

Great explanation and vid, guys! I created this mod back in the days and posted it on 4runners.org (Bob_98SR5)

[@TimmyTheToolman]

Bob Kim Well Bob, you certainly came up with a Sic Mod. Thanks for sharing it with all of us and we’re glad you like the video.

[@carterzaske]

Do you need the whole assembly or will the cupholder part fit in the old assembly?

[@TimmyTheToolman]

You need the entire assembly, mounting bracket, and e-brake.. nothing is used from the original.

[@Leino26]

Great Job!!!. I thought it would be an easy job!!.

[@TimmyTheToolman]

Leino26 It’s not a bad job. It does take some time but it’s not hard.

[@2SpyC_]

You didn’t need to pull off the 4x4 knob you can just take the boot liner out to take off the plastic top

[@TimmyTheToolman]

Yeah, you're right but which is the lesser effort? Messing with the boot or unscrewing the knob? Messing with the boot can be entirely more frustrating that taking off the 4x4 knob. To each his own.

[@ML-dl1cp]

does anyone know if a donor console from an auto tranny 4Runner will fit a 5-speed manual shift console? My swap is donor 99 auto to 98 manual.

[@TimmyTheToolman]

We're not sure because we've never tried it.

[@eljefeslash]

I have a 1998 SR5 manual, and I used a 2000 Limited auto donor. It may depend on some variables, but it worked for me (the donor tub was an issue - maybe the 99 tub will fit yours, though).

[@JessVallez]

Do you guys have a video on pulling the manual climate controller out I want to swap my slider to the manual knob controller

[@TimmyTheToolman]

We only have this one: kzbin.info/www/bejne/qH-ToXujj7yHmrc

[@CentralCoastCars]

sweet!!!

[@TimmyTheToolman]

We're glad you think so. Having better cup holders is a good thing.

[@BassFlatsBeyond]

Would this work with a 5 speed? I have a 98 limited 5speed and a 2000 auto I can pull parts off of?

[@TimmyTheToolman]

The 5 speed has a totally different console. I don't think this would work.

[@eljefeslash]

Yes, it will work (as long as you match the heater vs. non-heater version to yours). I have a 1998 SR5 5-speed and got a 2000 Limited donor console. Just finished it last night. The tub was a little bit of an issue (donor wouldn't quite fit), so I just ended up using my original tub and the e-brake line is pulling a bit.

[@TimmyTheToolman]

@@eljefeslash Good to know. Thanks for sharing this info.

[@reddboi7702]

Yes I have a 96 5 speed and had no problem. Don't bother with the E brake tub it is unnecessary.

[@ndeeeed]

Does anyone have links to 2:08? Button relocation tabs?

[@CACressida]

Awesome

[@TimmyTheToolman]

We're glad you think so.

[@CACressida]

@@TimmyTheToolman ive never seen this exact mod. Ive only seen people convert the entire dash to the 99+ but yout mod is a sick mod because 6 cup holders.

[@TimmyTheToolman]

CACressida 6 cup holders are better than 4

[@denilsonmatthew5004]

Can you give the link where you buy that center console box ?

[@TimmyTheToolman]

Sean grabbed everything he needed for this job from a wrecked rig at a PicknPull salvage yard. This is the affordable way to go. I'm sure Toyota probably still sells all these parts but it would run you a lot of money.

[@shaneintegra]

What's the reason behind the tub? I have a 97 limited auto 4x4 with rear heater and grabbed the parts from a 99 (ebrake, braket, console) and it all fit together without any issues. Guessing some vehicles are different than others?

[@TimmyTheToolman]

It's because the e-brake handle is offset on the models with cupholders and the tub is specific to work with that offset e-brake handle. It is interesting you found that your 97 tub worked fine for the 99 ebrake handle. I guess the safe bet is to grab it from the donor vehicle just in case you need it.

[@shaneintegra]

@@TimmyTheToolman Yeah that's extremely strange. Tomorrow I'm going to look at it again just to double check everything. My vehicle may have had it replaced from a previous owner for some odd reason

[@Terry-ww9tr]

@@TimmyTheToolman same here. i got the base from the donor vehicle and end up using my 97. worked fine with the new e brake.

[@TimmyTheToolman]

@@Terry-ww9tr Well, either we got some bad information or the tub issue is only relevant for certain years.

[@reddboi7702]

I have a 96 4x4 5 speed and didn't need the tub either. I wasted like 30 minutes trying to get those damn pins in to slide mine out and it was completely unnecessary lol.

[@gabrielpalacios624]

Silly question, i got a 98 4runner thats 2wd, i assume i still have to remove the area where the 4wd and shift sits in this vid correct?

[@TimmyTheToolman]

Yes.

[@juansoriano658]

I WONDER IF THIS WOULD WORK ON A 1990 TOYOTA PICKUP

[@TimmyTheToolman]

Maybe with some custom work.

[@turkeyyman7290]

I have a 97 base sr5 4runner would a 98 be plug and play? Or it's a 50/50 chance? *edit* another great video btw.. I've been doing a lot of my own repairs with u guys help [videos]. Thanks atw from NC! #YodaGang

[@TimmyTheToolman]

Turkeyy Man with the items we got from the donor vehicle, this mod was plug n play. Like we mentioned in the video, our buddy 4runner4leon has to cut some of his body (he has a 97’) but others have reported that they didn’t need to cut anything. Go to the link in the video description to read through a good write that touches on some of these things.

[@Gettinbentoffroad]

I have a 97 and pulled one from a 02 and it worked fine just take the e-brake and the little metal cup under it

[@davidnull7952]

Does this only apply to automatic transmissions? I have the 98 5MT and it has these two goofy and weak cupholders that pop out of the stereo bezel.

[@TimmyTheToolman]

No, it doesn't only apply to automatic transmission models. This will work for manual transmission models as well. The center console is the same.

[@Ioading...10]

What Steering Wheel is that from? Plug & play or?

[@TimmyTheToolman]

Gzus Piece es300. It is plug n play! But cruise control switch may need to be swapped.

[@Ioading...10]

@@TimmyTheToolman thanks! Just bought one online for $30!

[@TimmyTheToolman]

@@Ioading...10 Have fun with the install.

[@yazming1720]

Hi Sean I have the 98 w/cup holder already what I want to do is add the heater control set up for the rear. Do you have a video on how to make this conversion? Yazmin Venice Beach CA ⛱

[@cheeseburger9232]

Can you put amazon links in the description for the screwdrivers and tools you use. You might even make some money

[@TimmyTheToolman]

We put links to uncommon specialty type tools in the video descriptions. Most of the stuff I use was purchased on Amazon. I use a lot of tools from Gear Wrench, Dewalt, OTC, Milwaukee and others. If I put links to all the tools I use in every video, that would be quite a bit of work. But, when people ask me about a specific tool, I'll provide them a link.

[@cheeseburger9232]

@@TimmyTheToolman all that time to put links, I'm sure on your end it's just copy and paste. Alot of youtubers do it .if someone buys from your link amazon sends you money. I'm sure it's wroth it .people buy from amazon anyways so some of your fans l'm sure would use your link to buy stuff so you get credit for it. Even if they don't buy stuff off of your links it will still credit you for it. Just trying to help out the channels I like watching. Keep making vids thanks.

[@TimmyTheToolman]

@@cheeseburger9232 That's interesting. I've been linking stuff for a while but I never knew you could actually get paid for it. I wonder how people set that up.

[@angelomma2155]

Timmy i have a question i went mudding yesterday with my 3rd gen 4runner when i turn my ignition off i cant turn it back on. i only hear one click... please helpppp

[@gorkyd7912]

sounds suspiciously like a dead battery

[@TimmyTheToolman]

It could be a weak battery, bad connection, problem with the charging system or a bad starter. Start by cleaning up your battery posts and terminals and make sure your grounds are clean and tight. If you have a multimeter, check the strength of your battery when the engine is off. A strong battery should show around 12.6 volts. Next, turn on the engine and you should see that the alternator is charging the system efficiently at around 13.7 to 14.7 volts. If you don't have a multimeter, most auto parts stores will check your battery and charging system for free. I know for sure O'Reilly's does it. If you're battery is good and charging system looks fine, and all your connections look good, I'd then pull your starter and replace the plunger and contacts in the solenoid. kzbin.info/www/bejne/jYeUpWhjrMiihas If the charging system isn't working properly, it might be worn brushes in your alternator and we have a video for that: kzbin.info/www/bejne/bWLCnHWenJuSY6M Let me know what you figure out.

[@angelomma2155]

Timmy thanks for the feedback i figure out the problem and the problem was a bad starter thanks again you're the best!!!!

[@oscarochoa7633]

Ay timmay! It's me again I need help I don't know why my radio ain't working. I tried almost everything isn't find out what happen to it everything around works find

[@TimmyTheToolman]

Your stereo isn’t working? Is it OEM or aftermarket? First thing I would do is unplug it from the back and reconnect it. - Sean

[@ericksantiago6287]

Hi guys and body can tell me if the bumper 01 fitting on 98??

[@TimmyTheToolman]

Yes. All 96-2002 rear bumpers are the same, compatible and interchangeable. - Sean

[@thaguvofftheedge5107]

Question do ya think i can fit 2018 trd shocks under my 97 4runner?

[@TimmyTheToolman]

WITH Timmy no. Not without some Modification to the coil over setup. Here’s a good conversation about this: www.toyota-4runner.org/3rd-gen-t4rs/238368-confirmed-5th-gen-trdp-rear-suspension-3rd-gen.html

[@thaguvofftheedge5107]

@@TimmyTheToolman thanks for your time. Much appreciated

[@AntonioClaudioMichael]

Were you get the jst screw driver

[@TimmyTheToolman]

Here you go Antonio: www.amazon.com/gp/product/B00E55DL4I/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

[@AntonioClaudioMichael]

@@TimmyTheToolman your awesome timmy thanks for the link bro

[@anthonyt4981]

Is it essential that I get a new tub? I have a 98. I can't seem to find any handbrake tubs online.

[@TimmyTheToolman]

Some people have said they needed to replace their tub while others have said they were able to use there existing one. The safest bet is to get the tub also. But, it's not that much labor to get the center console off and the handbrake off to check before you get into the electrical relocating part which is the most time consuming. If your current tub isn't going to work with the offset hand brake, you'll just have to put everything back together and go back to searching for a tub that will work. The easiest way to go for this mod is to grab everything you need from the same donor vehicle.

[@anthonyt4981]

@@TimmyTheToolman So I just finished the project and I was able to use the original brake tub. However, I ran into a problem. My brake dash light doesn't turn on when the brake is engaged! I'm not sure if I snagged something, but the button that turns off and on the light on the dash works fine. Any ideas?

[@TimmyTheToolman]

@@anthonyt4981 Maybe the switch that triggers the dash light is broken. Try swapping it out with the one on your original brake handle. Unless you really tugged on the electrical connector to that switch really hard, I'd imagine the wiring is fine.

[@anthonyt4981]

@@TimmyTheToolman I tried the original switch as well, and it was working before switching the handbrake to the 99. The weird thing is, the dash light is supposed to be lit when the button is not pressed right? The dash light doesn't turn on whatsoever. It turned on once when I started up the car, then I dropped the brake lever and the light turned off. When I engaged the handbrake, the light did not light back up. I've posted my problem on t4r and reddit, no response. Such an odd problem. Does everything work on your end? Edit: Oh and thanks for replying in such a timely manner.

[@TimmyTheToolman]

@@anthonyt4981 Was the electrical connector hooked up to the switch when you dropped the hand brake?

[@jonp.6131]

I have a '97... My cup holders AND center console suck... Two birds with one stone!

[@TimmyTheToolman]

Win Win. Good luck with the job Jon.

[@robertblunt9517]

I just got a 98 4Runner in my console it only has a e t c

[@TimmyTheToolman]

Are you saying that's the only button you have on the center console?

[@FJCTRD]

will this work on a manual 4runner?

[@TimmyTheToolman]

Yes. This mod replaced items behind the shifter boot plastic therefore it will work. - Sean

[@Jager-er4vc]

Still waiting on those 4th Gen videos.

[@TimmyTheToolman]

You might be waiting a while. There's still not a person in our circle that has a 4th Gen that has hit us up for help with some jobs. I'm sure we'll meet somebody at some point, but for now, we'll just keep cranking out videos for 3rd Gen 4runners and some 5th Gen 4runner stuff as well.

[@Jager-er4vc]

Nah... it’s all good my friend. I understand. More than anything, I just wanted you to know that you have a 4th gen following too. I still love your videos and learn a lot. Keep up the great job guys! 👍🏻

[@Terry-ww9tr]

Upgrade to a 3rd gen!!! ;)

[@TimmyTheToolman]

@@Jager-er4vc Well, there is hope for 4th Gen videos. If you stick with us long enough, it will happen. Good to hear you're still picking up helpful info from our videos though.

[@Jager-er4vc]

Terry Giovanakis Terry Giovanakis My first was a 3rd Gen. I’m on my 3rd T4R now. #1 was totaled in a rollover. Ex got #2 (4th gen) in the divorce. Now have a black 2005 SR5 V8 4x4 that’s getting “Sick Mod’s”. I loved my 3rd gen. Hated to see her go.

[@mark2073]

WHERE'S TIMMAE!!!????

[@TimmyTheToolman]

I was filming. It was time to get Sean some screen time. I know he's not as pretty as me but maybe we can hire a better make-up artist and improve his looks a bit. The dude knows how to wrench and perform sic mods so he has that going for him.

[@king49334]

Carpet need some detailing

[@TimmyTheToolman]

My first 3rd Gen 4runner purchase was a 2000 and the interior was very clean. My second 3rd Gen purchase was a 98 and the lady I bought it from carted around a long haired dog in it for a lot of years. Even though I cleaned the inside pretty darn good, the interior still smells like musty dog. Sean's rig that was used in this video was obviously owned by people who weren't the cleanest.