Learn how to assemble the all-new Wrath 430. For more information go to www.centerpoin... Follow CenterPoint on social Instagram / centerpoint_archery Facebook / centerpointarchery #YouWereBornForThis
Пікірлер: 36
@tomickes4093 ай бұрын
You making and pproviding this video has finalized my decision to buy this product ... thanks
@desertvs2 жыл бұрын
Just received my Wrath 430 from Midwayusa today. First ever crossbow. The video was well done and way easier to see what the printed instructions were saying. The instructions are well done but the video made it goof proof. Thanks! Look out turkeys!
@slavazavalin8 ай бұрын
As a piece of advice to all new owners: put blue loctite on basically all the screws in assembly and flip the quiver plate so the latch is not scratching the limbs.
@josephrosnett7108 Жыл бұрын
Very detailed! I hope new crossbow owners check out these videos!
@GovtWatchdog Жыл бұрын
I’d like to add an initial step. Seems pretty common sense but be sure to check the bolt rail on top prior to assembly. For some odd reason Centerpoint packages these so that the edges of the foot stirrup dig into the aluminum rail 🤦🏼♂️
@rockylavigna597711 ай бұрын
You are as cool as cucumber, just made my assembly a whole lot easier, thanks.
@littleposerfish10 ай бұрын
You done the cable crossover on the left side in this installation. Manual said right side. Does it make a difference?
@Angelhernandez-uw3rw2 жыл бұрын
Can you make one on how to change strings on it
@christopherhull37573 жыл бұрын
I bought one....hope it's a good one.
@zigthepolishguy26103 жыл бұрын
It's not available yet is it ???
@christopherhull37573 жыл бұрын
Me 2...
@underdogoutdoors2 жыл бұрын
Just purchased. Can I also use the silent cranking device to De-cock this crossbow?
@paperaxes4192 Жыл бұрын
I just bought the 430x and the user's manual for that one says you have to discharge it to decock. So don't load it unless you can fire it safely - your is probably the same.
@fulllfreezer2 жыл бұрын
Still waiting for mine to be shipped to morse sporting goods Hillsboro nh
@statgenie65755 ай бұрын
There are lots confusion on where to install the cable slide. This instruction video is contradictory to the instruction manual. Amazon pictures show the slide on right but CenterPoint website showing left. I measured the thickness of the Grove bottom to the slide top touching rail, they were 0.165" and 0.14". So the cable grove close to the wider opening side is shallow, therefore the cable slide should be on the left side of the bow and cable crossing should be on the right side. The instruction manual is correct
@brianwright9314 Жыл бұрын
at 39 seconds you snap the cable slide onto the right side of the riser, strings crossing left of the cable slide. This is opposite of the instruction manuals for the 430 (PG 3) and 430X (PG 2). Which is correct? String cross on the right or left side of the cable slide?
@kurtglo Жыл бұрын
I think the picture in the owners manual shows the front assemble laying upside down and that's why it looks like the left side, but in reality, it's really the right side. Hope this helps?
@kurtglo Жыл бұрын
is this the same assembly as the 430X?
@anelhadzimesic24128 ай бұрын
This goes way too fast, doesn't show the exact part, i am completely lost, at the joint cap part
@peterpirog30893 жыл бұрын
KEVIN YOU FAR AWAY FROM THE 430 FPS
@kurtglo Жыл бұрын
with 460 grains, mine is putting out 409 FPS- so, he's 22 FPS off which isn't far away as far as I'm concerned. But you're right- they shouldn't advertise this at 430 FPS.
@statgenie65755 ай бұрын
You mean 400gr?@@kurtglo
@stetsonspurs46802 жыл бұрын
Nice bow, but dishonest advertising. This bow will never reach the claimed 430fps with the provided 400gn bolts. Market your products honestly. Every single review of this crossbow proves its a 410ish fps bow at best.
@Illness.og. Жыл бұрын
Which is still very good
@kurtglo Жыл бұрын
welcome to the world of dishonesty
@Sonjaorleans11 ай бұрын
Is 20 feet per second going to noticeable .will the deer 🦌 care
@statgenie65755 ай бұрын
The point is to advertise honestly. Will a dead deer know that? Of course not, it would not even know if it was killed by a hammer. Will a live deer know that? Probably not too. But when you miss, you know that😊
@TSV8791Ай бұрын
Ты сначала научись сам правильно ставить слайдер( бегунок), а потом других учи!
@everarreola770510 ай бұрын
This guy doesn't know how to read instructions it clearly stated in the manual to place cable slide on so that right side cables cross. It doesn't say place cable slide on right side
@slavazavalin8 ай бұрын
I noticed that too, but I think the instructions perhaps need to be improved. If you look at the placement of these sliders on other xbows, he is doing it right.
@statgenie65755 ай бұрын
I measured the thickness of the Grove bottom to the slide top touching rail, they were 0.165" and 0.14". So the cable grove close to the wider opening side is shallow, therefore the cable slide should be on the left side of the bow and cable crossing should be on the right side. The instruction manual is correct
@montagnard-zz1td10 ай бұрын
What detail, you cannot see what he is doing, or how he is assembling the components. The video is unclear as to how the parts marry to one another. No detailed closeup shots of assembly process. He seems to be assuming you have done this before. I have not and I evaluate this video as mediocre to poor. In addition I have a silent crank device for my crossbow. It appears this device goes into the rail and it is not shown on the video. Now I have to disassemble my bow to install the cranking device. This video goes from mediocre to poor as far as I am concerned.
@brettwiddicombe84292 жыл бұрын
I brought my drawstring back that cocks the crossbow to cabellas where I purchased it earlier today after receiving massive bruising on the tip of my dick and also my waist and even the sales rep could see the defect on why it broke. I have tons of pictures of the bodily damage and will be contacting a lawyer over the next week and if further pain continues I will be going into the hospital to make a report along with not being able to work right now. I own a construction business and I can't even wear pants because it rubs against the massive bruising on my dick. Sorry to be so straight forward but I think everyone needs to know before buying this product to be careful