Oster Fast Feed Zero Gap : Blade Change Method

Zero gap your Fast Feeds using this easy to do method. Simply change the bottom blade out and youll be set in no time. Please like and subscribe.
Purchase here: amzn.to/2elYWYB

[@pirojfmifhghek566]

I'm so glad I followed the instructions. I spent like ten minutes trying to fish that damn screw out from the gap under the sink cabinet. Works perfectly now.

[@MrKaystew]

"You gotta drop it or it won't work perfectly" haha. Looking forward to your upcoming videos man.

[@aristones7132]

I agree 100%! Go to clippers, once I've added the ceramic blade.

[@culturecutter8272]

Thanks to you and the link, I just ordered me 2! 👌

[@lemizoid]

He said “take a couple minutes to find it, get mad…” haha, the realist most sensible most accurate zero-gap tut on the internet.

[@michaelg7192]

mother of god thank God you made this video I bought those clippers and never use them for a whole 3 months cause didn't know that the clipper needed another blade.

[@Samuel-dc2mq]

love your videos man thank you.

[@Roycutsnfishes]

Bro!...finally a video man. im a big fan👍 been to busy to make vids?? it's all good..I have fast feeds and I love them bro better than the masters imo. hope ur fam is good✌💈

[@kikado3]

Super busy. Ive been transitioning into the new house, new job and getting my house licensed as a barbershop for myself. Almost all done with everything tho. Also learning my new camera which i really got the hang of as of yesterday so the quality will be crazy. Thanks for watching

[@Pj192130]

Question can I use this ceramic blade to trim and cut my beard down to a one or fade the sides of my head. I saw another model oster with interchangeable blades. I am trying to buy clippers that I can adjust. 🙏

[@TheJesusr92]

Glad to have you back Ricardo, I have a question. I recently made the transition from Wahl clippers to Andis, and for some reason I don't feel my haircuts are turning out as good as they did with my Seniors. I'm using the masters with the nano magnetic combs but I feel like I have to work the line of demarcation way more than I should. Did you ever have that problem? Or am I missing something?.. thanks in advance.

[@markubig]

I just zero-gapped my brand new fast feeds with the coarse ceramic blade and it cut awesome . . . one question, what is the zero gap equivalent to in outer detachable blades . . . 0000?

[@scion46]

I put the #1 cutting blade from the classic 76. I tested the edge on my arm like you would with the outliners when you zero gap them and it cut me. When I tried it the same way I would during a cut I didn't feel anything. Could I still use it that way?

[@jeremiahcollins_]

dude thanks for this. most fast feed zero gap vids are confusing. I have the fast feeds as my primary clippers what would you recommend for a good back up pair? Thanks man!

[@noahcurrier361]

Another fair of fast feeds or whal senior

[@Workhardworkoutharder22fit]

What do you use on my head????? I be looking fresh!!!!!!!! thanks for all the fly cuts!!!!

[@yagurcaesari5906]

hi ricardo.. when the blade stops to cut i change only the cutter blade? the ceramic ? or the stand blade of the oster original too ? thanks man

[@Herman138]

hi,I finded one ceramic blade A5 for pets with 4 holes for 4.99,will be fine to the fast feed?thanks...

[@johnboy4016]

Ricardo, for some reason, my ceramic blade is overlapping. For two hours now I’ve been trying to get it below the still blade. Can’t figure it out. Any tips or suggestions?

[@MrDamon70]

I have the ceramic blade. I've never been able to get them zero gapped. What bottom blade you use?

[@larry4632]

Wat kind of camera are u using? The quality of the video is great

[@antwonmoore7997]

How do i order the ceramic blade?

[@joshpippin2945]

just recently put the ceramic blade on mine too...butter

[@allenchristopher8095]

why is my andis coarse blade teeth still a tad higher? i adjusted it numerous times.

[@entrevoid6625]

I just ordered the one in your description but it looks different from the one you have, yours has 4 dots the one I ordered in your description has 2...

[@lemonman4437]

Hey man I tried this but the ceramic blade hits my guard and makes this weird loud noise any suggestions on what to do ?

[@hawaiian-cerveza]

Has your clippers just stopped all of a sudden? I cleaned out any hair I could but it stops once and a while.

[@warrenwong9140]

dope vid. been waitin a while for u to put this out. did u use the medium or coarse blade? and is the throw short like a wahl senior or longer like a legend or even a masters? box on the feeds say 000 to 1 and my guess is that once u gap em it'll be less. last question after gapping do they eat the nano guards? bless up

[@kikado3]

Coarse blade. It's equal to like a pair of seniors. And no eating the nano guards at all like the masters do. They work flawlessly. Best of luck bro

[@Dirtjim]

I shave my head with a #1 (1/8") guard on my crap conair clippers. I just bought the fast feed, do I need to buy a guard to do the same haircut?

[@JasonAlexzander1q47]

Not if the lever is kicked back. Fully opened.

[@olivermower3661]

When you put the ceramic blade on, do you find you can't use the original guards? It seems to me that the ceramic blade is wider than the original blade which causes them to hit the guards. Does the andis double magnetic guards fix this?

[@Beatbyawhiteboy]

No issues with the Andis magnetic guards. Works fine.

[@sense321]

when we drop the screw does it matter what kind of flooring it is? lol just playing great info think i'm going to grab me a pair of fast feeds.

[@kikado3]

Word lol good luck bro

[@strapszn9035]

From my personal experience this andis ceramic blade (#64440) did not work for me no matter how hard I tried to adjust it to zero gap it. I've followed all the steps in various youtube clips where people say dont screw it all the way and adjust the two blades. No matter what when i get the 2 blades where i like it when I go to tighten it for final use it always gets into position where its too 0 gapped if that makes any sense. I test it on my arm and I'm always gettin cut... Just wish the teeth on these ceramic was slightly shorter... Luckily for me my hair is not coarse so the stock blades works fine but wished this ceramic blade worked so it helps with the temperature on the clipper as well...

[@johnjohn7652]

Hey, I just purchased a blade for my fast feeds, but the blade wobbles when turned on. It also hits the bottom screws underneath the blade if that makes sense, any help?

[@kikado3]

Could be the wrong blade. Some ceramic blades are wider than others which creates this problem

[@soupethebarber6498]

Just started back using my fast feeds. But yeah great video bro

[@ojstoical4044]

Soupe the barber You can also use the center blade from the OA detachable too.

[@gorillaj131]

jus changed my fast feeds now they cut like butter

[@matthewvalley4642]

I tried this on my Fastfeed, and when I open the lever up the blade won't move. Any suggestions to what is going wrong? I ordered the course andis ceramic blade.

[@kikado3]

Could be the blade hitting the back metal piece that holds the top blade. I can pretty much guarantee that. You have to grind the round corners off so it doesnt touch the moving blade.

[@matthewvalley4642]

Thank you for the reply. I will try that for sure.

[@makara01]

Hi Matthew I ordered this blade for my Oster fast feeds. Did the install and I am having the same issue. Blade will not move when the lever is open. Did you get your to work? Thank you in advance.

[@SpicyRoll-m4r]

why your blade has 4 holes compare with the link that you send only 2 holes..i buy in aliexpress 5pcs for $15 same that you used..

[@nathanquintos3000]

can you use the Ceramic course cutter for pets by Andis ?

[@nathanquintos3000]

www.amazon.ca/Andis-CeramicEdge-Ceramic-Coarse-Replacement/dp/B0013MAOY6 this one?

[@monicalee6785]

I noticed the ceramic blade you have in the video has 4 holes on the bottom. The ceramic blade in the amazon link you posted only has 2 holes. Does that matter?

[@kikado3]

Weird. It's the same link I used previously for the one I have in the video. I'll check into it tomorrow and make changes if needed. Thanks for the notice

[@monicalee6785]

Thanks!! Let me know what you find please.

[@franklanbrano1282]

Monica Lee yes you can Bc it's the same exact blade in clipper

[@richardlizares3427]

which blade is it exactly? what size? there are a few on amazon

[@mainsource9804]

Richard Lizares oster 76 blade

[@thecuttingspot]

Can the same upgrade be done to the andis masters/fade?

[@aaronshakill7104]

where can i find the 5,6,7,8 andis guards

[@ChachoLara]

Aaron Shakill I got mine from brushking.org and they're the double magnets instead of the single. Ran me about 19 bucks, not bad imo.

[@albertorodriguez6608]

Ricardo ordered my ceramic blade for my fast feed. But by mistake my relative brought me a pet, can it be used the same ??

[@Herman138]

The ceramic blade from Oster A5 for pets with 18 teeths is working perfect You have too use dremel to grinding little bit the blade (not clipper) and is zero gapped cut excellent!!!price on ebay 4.99 excatly the same what andis only diffrent is have 4 holes...

[@albertorodriguez6608]

lukasz herczakowski What number of sandpaper recommend

[@Herman138]

Alberto Rodriguez I used dremel,so dunno what size is good but is hard to grinding ceramic blade...so You need good one You will be see if the blade stop working its mean You have too grind little bit more,this is not difficult...

[@thecuttingspot]

What size blade are you using... I've looked on eBay and there are more than one size available...confused.com...yes I am.

[@kikado3]

Just a coarse blade. There's a link for it in my description. It comes by itself

[@thecuttingspot]

I took one off a detachable blade that I had spear. The only problem is that blade overlaps a little. Away thanks

[@BlakeSuperior_Beats]

Is it the #1 detachable cutting blade? That's the best size for zero gapping Fast Feeds.

[@thecuttingspot]

Yeah... You might find that there's a overlap when you add a guard but don't worry just adjust the top blade.

[@draco869]

I dont know if youre going to read this but mine makes a weird noise when i pull the lever down

[@kikado3]

I read everything lol. Im guessing you got the wrong blade. If you do the blade is a bit wider and it rubs the housing of the clipper on the back side. Check and see.

[@kikado3]

I had this same issue when i got the wrong blade

[@650degreez4]

How's it cut bro

[@kikado3]

the best

[@BarbersLeague]

Thumbs up

[@_215Juice]

what happens when i drop both screws? or if i drop the screw twice? im learning sensai. wax on - wax off. 😪😪😂😂😂😂

[@kikado3]

Unforseen territory my man. I dont want to be around when it happens lol

[@MissJoysArtRoom]

Will this work in a wahlstrom brand too? Lo! Yes! Drop the screw & get angry!!

[@kikado3]

Not this blade but just adjusting the top blade forward should work

[@BoopFoo]

I'm not even a barber and I want to buy this clipper to do this

[@vlim9606]

Welcome to the dark side lol #fastfeed

[@kikado3]

Im now a member lol

[@andrewmayorga68]

hey I dropped the screw so it would work better but then I couldnt find the screw! worst time in my life

[@jamiljoaquin9398]

lol, drop it and get mad.