TruCut Hand Applied Polish Powered by Turtle Wax is used to change the reaction of a bowling ball. It is available here ctdbowling.com/products/trucu...
Пікірлер: 45
@gregseate23694 жыл бұрын
I learned something new watching this video! Keep it up.
@jackieloewy54904 жыл бұрын
I also found I didn't like the out of box finish 500/3000. I found what worked for me was 1000 on 6 sides, ending with top and bottom of the ball sanded last.
@davidpena635 жыл бұрын
It’s not further right, it’s the right target.
@chriskelly5093 жыл бұрын
Where can I find that pad that goes over your hand like that?
@eefvan52055 жыл бұрын
I used tutlle wax for cars this is also good for your bowlingball. I used it and had the same outcome as you with your device
@johnrocksvold91055 жыл бұрын
How does polish compare to the 5000 True cut pad?
@chriskelly5093 жыл бұрын
The 5000 pad when not use on a spinner will get you a 4000 Grit finish and then the true cut polish will get you a 5500 finish by hand after using the p5000 d-pad, when using the p5000 d-pad on a spinner you get a 5000 grit finish that works great as well
@ham4fun4 жыл бұрын
hope this question makes sense. would this make a stronger ball a little weaker? I usually use Entry-level ball since i am a low-speed wheelchair bowler but want to try a little higher end ball.
@ham4fun4 жыл бұрын
@Isaac Anderson i am actually about to get the Vapor Zone Hybrid
@stompingpeak20433 жыл бұрын
Polish and high grit surface would just make your ball go further down lane before it starts its rotation. A really strong ball will just be stronger once it gets down lane. Meaning less energy is lost in the front part of the lane. Saving more of it for later down lane. If you are a slower bowler with alot of hook then something like this should really help you get the ball further down lane. Although just getting a low end ball would probably be better than something that has a huge asim core and aggressive cover.
@ham4fun3 жыл бұрын
right before the pandemic i got a Vapor Zone Hybrid and love it.
@stompingpeak20433 жыл бұрын
@@ham4fun hell yeah. Keep it up. I'm thinking about getting a tank blitz from motiv here pretty soon myself
@ham4fun3 жыл бұрын
@@stompingpeak2043 yeah. i also have a Vintage Danger Zone and a Brunswck Twist and a DV8 OutCast Citron Black (which i dont use cause its to light for me now)
@ThatCuddlesGuy3 жыл бұрын
So my main question or even an experiment would be, if you surface a ball to 500 then polish it from there what grit would it end at??I’ve done it to a couple of mine and I like the motion it makes
@chriskelly5093 жыл бұрын
Probably 1500,2000
@porkisthebestmeat89552 жыл бұрын
Nvm
@jeffreycosby15644 жыл бұрын
what is the name of that website
@Ctdbowling4 жыл бұрын
Ctdbowling.com
@TrueLee5 жыл бұрын
Can't you change your reaction by increasing or decreasing you speed?
@Ctdbowling5 жыл бұрын
There are lots of ways you can change your reaction.
@stephen63164 жыл бұрын
problem with changing ur speed to account for your equipment is ur consistency between equipment then you gotta do you and let the ball do the work
@todddavis54335 жыл бұрын
High rev speed bowlers need to stop wasting their time on asym balls..symmetric is the only way to go..that way your ball will finish and stop leaving weak 10 pins when you have to swing it
@cameronhenderson42025 жыл бұрын
Im high rev and medium to high speed 2 hander. I carry 232 in our house shot. All i use is asyms. I hate anything byt asyms on house shot.
@JerryTehAwzome5 жыл бұрын
Yeah I gotta agree with Cameron. Asyms work so much better on house for me and anyone else that throws high rev high speed. I actually leave a lot of flat and stone 10s with my 2000 grit phaze 2 (symmetric drilled pin under bridge) yet when I throw on sport or pba patterns its usually the only option over my alpha Crux or code x (both asym drilled pin up)
@carking72075 жыл бұрын
I have a polished bowling ball what can I do to make it hook more
@wbrown3105 жыл бұрын
What ball is it?
@carking72075 жыл бұрын
It is a Brunswick twist
@carking72075 жыл бұрын
I’ve always wiped it and cleaned it after every session
@Ctdbowling5 жыл бұрын
That ball is a lower end performance. So sanding it will make it hook more. You can get TruCut Sanding Pads at ctdbowling.com I would recommend starting out with the 2000 grit
@tw39315 жыл бұрын
CarKing have it sanded at the pro-shop for 5 bucks.
@DASamX54535 жыл бұрын
That's crazy yo cause any type of Car Polish, especially Turtle Was has always bee illegal in USBC Play...So now you have a product manufactured by Turtle Wax to be used in Bowling but USBC still says Illegal Products from Turtle Wax...SMH What a scenario
@Ctdbowling5 жыл бұрын
You have always been able to use polish (Turtle Wax)before or after competition. This is no different and isb100% legal.
@leonardmartin51455 жыл бұрын
Just buy the right ball!!
@Ctdbowling5 жыл бұрын
Or change the surface of the one you already have. Because that makes a lot of sense and there is no right ball picking machine available 😂
@vincent96304 жыл бұрын
Don't say CEO in your intro, doesn't give you any credibility and in fact sounds infantile. Just use you name company name, founder sounds better.
@Ctdbowling4 жыл бұрын
I'm good with my intro. Thanks for watching.
@vincent96304 жыл бұрын
I say this all as constructive criticism. I like most of your conversation, you have a great tone, albeit a bit rushed, good voice, and lots of knowledge. I think if you can slow down, create multiple shots and cut them together, you can be one of the better channels here on youtube. There is a lot of promise in what you have shown us, just time to fine tune, make it better and then of course 'take over the world' as they say.
@Ctdbowling4 жыл бұрын
I appreciate the comments for sure. I didn't view it as a negative and I agree with your points.