Cheap airbrush kit - good for scale modeling?

[@cygnusx10]

Man, that compressor sounds like a turbo charged... personal relaxation device. Great vid thanks for sharing.

[@StaticModel]

Haha :D

[@restored2golrythrift411]

Dildo...

[@gabrielcalamaro]

hahahahahahahahaha xD

[@GeorgeNadaYT]

I like how it slides around on the table😂

[@LSFprepper]

Right? I was thinking buy a bunch, put plastic feet on to slide easier and race them!

[@JunsMiniGarage]

I think it looks great, it’s very portable, it’s a good option for beginners who only make model kits occasionally. I quite like it myself, and if you can build 20 models with it without breaking it then it’s worth the money. But since it’s constantly running it might be burned out after painting 5 model kits😂

[@dakufaust]

I need to paint FOW pieces. You think I'd last long enough to paint two armies?

[@vorgeyahiya8613]

@@dakufaust I don't know if this is too late but there's one with autostop feature.

[@mosheep]

@@vorgeyahiya8613 I just got one with the auto off feature. It's nice, but I have yet to fully use it tho.

[@vorgeyahiya8613]

@@mosheep I'm using one for 4 months now, does the job at least as I'm not using it often. Downside is you can't configure the pressure to your preference.

[@blainefrenette3520]

Thank you for your Video I just ordered a kit similar to this yesterday. I am aware that you get what you pay for and I’m looking at this is starting point. As my skill and knowledge increase I’ll up grade components as needed. Thanks again.

[@shangron5796]

Just bought kit. After 8 months what are your thoughts?

[@warmcast3188]

I bought a cheap Expo airbrush and compressor (£60) about 6 years ago. Struggled with it from the start. Generally wouldn't recommend cheap airbrush packages for beginners. I replaced the airbrush with a Sparmax Max-4 early last year and kept the compressor. This is 200% better! Although even the Sparmax is still a general purpose/beginners airbrush, the build quality and precision are so much better and that makes a huge difference.

[@sameerdodger]

Well obviously the Sparmax is better, it's way more expensive.

[@johnjacob688]

So I guess that's what my single neighbor has been doing late at night. She seems to get super excited when she gets close to completing her models.

[@StaticModel]

😂

[@bunion8579]

Bought a similar unit 2 years ago and still going strong and have built many car and aircraft models using it. Had some initial usage problems with things like spray nozzle adjustments (critical) and how much paint thinning was required, but I think that had more to do with the fact that this was my first airbrush rather than any fault of the unit. Had to replace hose but only because I stood on it. If you adjust pressure knob just so, I found compressor (yes, same Harley Davidson sound as the one on this vid) will only run as you're actually spraying and will shut off a couple of seconds after trigger release. Slightly thinner paint with these cheap units is also a big help.

[@TheCypherBlu]

Thank you! That answered my question: Does it run all the time - Yes! Appreciate you taking the time to do this review :)

[@hozongxi]

Have that same exact one I bought for around US$35 when I returned about 3 years ago. Still using it now even for my professional commissioned work with the only damaged part being the nozzle because i dropped the airbrush.

[@charlesvdb9371]

Just bought it from your video Good option for begginners With some pratice you can easily learn how to diluate and use it Quite precise when you know how it works Built an FW190 1/72 with it and it’s the smallest you can do You can do very small dot with the right ratio of paint/diluant If you are a young modeller it’s perfect !

[@charlesvdb9371]

Oh and I forgot, use airbrush special paint it can easily be clugged if you paint is too strong

[@Lexcore.]

Hi I know your comment is 8 months old but I was wondering if it’s still holding up? If so I might invest in one (I am a beginner after all) and may I ask what airbrush paints you use?

[@Triptunee]

i got exactly the same , its basic but does the job

[@ivanovivan-russ]

Покупал такой же набор, только чуть другой аэрограф. Сам аэрограф нормальный, без доводки грунтовал и базу наносил, акрилом водным. С компрессором беда - по столу бегает и шумит прилично. Сейчас приобрел JAS, но ручку из этого набора и комплект, использую.

[@swisscake1591]

Just got one today. Will be my first airbrush to start painting my models. Sounds like a decent one to start painting with! I'll upgrade it eventually but for now it is what I got :)

[@mosheep]

I've been eyeing this kind of airbrush kit to get started on painting gunplas. Thank you Google for listening.

[@StaticModel]

Haha :)

[@MarnVEN]

Started model building as a lockdown hobby, bought a similar airbrush kit. It works fine for me. I am back to working full time and only build/paint once every week. I get pretty good results and don’t mind taking breaks.

[@StaticModel]

Great! Thanks for sharing with us :)

[@ww2blackcat]

Hello mate. I've started model building on the same situation. Since march/2020 I have exactly the kit shown on the video and I can't complain. Seven models (1/35 tanks) already done. I'm still learning but have noticed how easily I can use tamiya products and how hard Ammo and Italeri paints are (in my case) to apply because the tip always dry too soon and I have to stop and clean. Might be the wrong solvent but maybe the airbrush/compressor also are to blame.

[@edgarfigueroa8860]

Same situation, except for me the airbrush that came with the kit constantly clogged and wouldn’t spray no matter how thin the paint was. Bought a siphon feed from harbor freight and it works perfect

[@MrArthur2312]

Is it still working now and having no problem whatsoever?

[@vadien2164]

who asked

[@theuniversewithkingkiwi]

i'm getting my first airbrush, this one looks good!

[@chancerNW]

I've used one of those air bushes for nearly 8 years. Get rid of the spanner and only tighten the nozzel with your fingers. As it is way too easy to shear off with the spanner.

[@chancerNW]

@Ingo Herrmann I removed the sheared off portion with a needle point file, which gripped the inside or the sheared bore and enabled it to be unscrewed.

[@aaronramly1705]

it lasted 8 years ?

[@chancerNW]

@@aaronramly1705 Yes the airbrush lasts and it still works. The compressor has been the week spot Im on my second one. The first one lasted 8 years

[@johnreed9435]

Agreed. Same experience that I had. Cheap will work but will easily fail

[@dinocha0s]

Thanks brother this was insanely helpful!

[@mirylucy7457]

I've got this machine as a gift about 2 years ago and today I decided to use it for the first time...my mistake is that I waited to long to operate it and looks like the dc input from the air compressor is broken, it doesn't have the jack inside so I cannot connect it to power

[@malithdhanusha9789]

Very useful video..👍👍⭐⭐⭐⭐⭐

[@Yourlocaltankgirl8375]

I use this compressor with my iwata Neo

[@netbis-marek-duda]

Thank you for your great review. I am railway modeler, I need something to do weathering my trains, but I can not decide, if this will be enough or not. Your review was really helpfull. I subscribed to your channel for more great videos. Best regards

[@garganrose]

Perhaps this could be the thing that finally allows me to restore the Chrome on my g1 transformers.

[@StaticModel]

Can't really guide you on this... Chrome look is hard to achieve even with professional airbrushes... But if you go with it, Alclad black primmer + chrome color is your best bet.

[@1442GlennLane]

Playing music to drown out the noise from the compressor. 😂

[@rickyquinteros7100]

Mine didn’t come with a moisture trap :( but I am looking forward to using it

[@rendoroid]

thank you! im getting one~

[@guncla]

Did you notice any air leaking at the hose joint? Is it normal or should I replace the hose?

[@StaticModel]

@@guncla There should be no leaks.

[@qhy565]

I hope you have a video disassemble and cleaning And how to clean the filter,, I used it spray luster dust on cake and I don't know how to clean it, I soaked it in alcohol It didn't remove the luster dust

[@StaticModel]

Thanks for feedback, will make sure to address your question in upcoming videos.

[@inscoredbz]

I use an old testers airbrush and compressor. It's a single action, but it has served me well for what it is. This would be a step up for me.

[@StaticModel]

To be honest it is not worth upgrading from your setup to this, I rather get good compressor and stick with your testors airbrush :)

[@jasonstephen1185]

Bought this exact system and it doesn’t work Thought it would be good for a beginner but now I think I will just buy a top of the line system

[@zzador]

It seems you're not thinning down your paints & primers before putting it into the airbrush. That's something you should do. Always thin your paints & primers before airbrushing them. That way the compressor won't have such a hard time.

[@StaticModel]

I intentionally used pre thinned "airbrush friendly" paint that is marketed specifically for use right from the bottle, because that is what beginners usually go for. If you are experienced and willing to play with thinning ratios, it's most likely you also want precise pressure control and another compressor kit.

[@aliqbalsomarta7911]

what is the price per set for the mini compressor machine bro.. i like the results 😊😊

[@luislealsantos]

Very usefull . For me, to start and learn how to use airbrush sounds a good option. Great video. Tks.

[@adammurray7761]

They are crap I had two when I started and they both died within two months. Get a compressor with a tank.

[@abimanyuriska8475]

What caused this? Using it for too long till it's very hot? Or is it something else?

[@LuBux100pre]

lol

[@calvintanson9448]

1:36 i think you install the air filter wrong way, correct me if i am wrong

[@StaticModel]

That's only demo showing that you can connect such things, as you can see later I am not using it this way.

[@calvintanson9448]

@@StaticModel owh You only show that the connector same size as the filters

[@StaticModel]

@@calvintanson9448 yes, and if you already have filter or airbrush on hand that makes it easier for you to understand what kind of connect is used in compressor.

[@cammacgregor9354]

Why would you place the compressor that close to an object being sprayed? It gets exposed to overspray, as clearly seen in the video when painting the car bumper red--???

[@StaticModel]

To prove I am using it.

[@styles3732]

The one i got was really quiet. 😜

[@andykopgod]

I bought this sagud one, but it says i cant use Tamiya Acrilics with it, have i got to totally thinner the paints out? Cheers

[@OdwallaJuice]

I just started using this airbrush today based on your review. One issue I'm having is it seems like the paint is coming out really slow. Like, it takes a while just to get full coverage on a single piece of my gunpla kit. I thought it was my paint being too thick, but I thinned it further and it showed signs of being too thin (webbing, spatter). Is there something I'm missing or is this expected for this quality of equipment?

[@StaticModel]

I believe you are experiencing dry tip. Use cotton swab with thinner to clean airbrush tip every 15 seconds.

[@OdwallaJuice]

@@StaticModel I'll give that a try, thanks!

[@eruvhan3632]

@@StaticModel whoa thanks you life saver👍

[@EPDrawing]

if i want to go one step further ..... what should i go for? any airbrush that you could recommend, just a bit more powerful? thanks. and thanks for this video XD

[@StaticModel]

Compressor with tank AS186 and H&S Ultra airbrush.

[@H-When]

Perfect video

[@Hannah11876]

Can you technically attach a tank on this tiny compressor?

[@StaticModel]

You can, but it will kill it that way very fast.

[@luxiscarbonus]

Great video. Thanks. I'm starting this hobby also and bought the airbrush in the video. My worst fear is the paint "liquibility"... Any tips? Thank you.

[@StaticModel]

It's better to make paint too thin at first spray attempt. Cause you can always add a bit more paint till it be perfect mix. If you make paint too thick at first spray, you will clog it... Disassembly and cleaning is the last thing you want to do right after purchase of first airbrush :)

[@luxiscarbonus]

@@StaticModel thanks!

[@DeanxPeaceMaker]

I don't know where you are from but I like your accent

[@lucasreid5459]

He sounds like russian

[@StaticModel]

@@lucasreid5459 But I am not :)

[@lucasreid5459]

@@StaticModel fine but somewhere in north 😭

[@jorgeverq89]

I was thinking on buying this just to apply primer paint to miniatures. Would you recommend it?

[@StaticModel]

It will work for the task given, but it won't be a pleasant experience. So I don't recommend it :)

[@Christian-kd2db]

Where did you buy it, is it suitable for painting metal and PVC myth cloth figures?

[@StaticModel]

Hi, I got it from the store I no longer recommend, just use amazon instead.. Also it will work for your tasks, but it won't be very simple and easy. Stay tuned for new airbrush episode coming soon!

[@kami12kaze87]

This was my first airbrush. It's a bitch and a half to maintain. The O-ring in the nozzle cap disintegrated after just a week of usage, and the needle gets stuck on the trigger even after cleaning. Use it if you just want to get started airbrushing to test the waters.

[@jrus1]

Possible to use this for sandblast media

[@StaticModel]

No, this one is more for casual painting and make-up with highly diluted paint.

[@FAITA2009]

Got one of this. 6 months later, garbage!!

[@Origamipaper-xf6xs]

Hey mate, not sure if this thing is good. Should I buy it?

[@amberpollard3465]

Name so i can go look to purchasee

[@modellbaupur2142]

My nozzle is damaged and where can i buy a new one for this airbrush?

[@StaticModel]

AlliExpress or eBay. Just make sure to get same size as your neede.

[@modellbaupur2142]

@@StaticModel thx

[@thequantumcuber3261]

Thank you for making this informative video sir, I bought the exact same airbrush and compressor set from amazon. After using the airbrush for some time, it stopped working. After seeing many online guides and doing a complete deep cleaning, I finally got it working again but it stopped again after 30 second. Now the airbrush sometime works for one minute but the next minute it stops. Do you have any idea as to why this could be happening. Thank You

[@StaticModel]

It is important to understand what part of system fails. Is it airbrush or compressor? See if compressor keeps pumping air without airbrush connected. If it still stops, there is something wrong with compressor itself. If it only stops when airbrush is connected, that means there is a clock in air system or airbrush trigger is faulty.

[@thequantumcuber3261]

@@StaticModel The problem is definitely not with the compressor as I have tested it thoroughly. It is most likely with the airbrush. I have not identified a consistent problem but sometimes there are bubbles in the airbrush cup. I have deep cleaned the airbrush, but it is extremely inconstant whether it worked or not

[@StaticModel]

@@thequantumcuber3261 bubbles are usually caused by poor seals at nozzle cap, poor seal also make paint to dry out in awkward areas of airbrush, also "dry tip" issue will occur more often. Maybe your nozzle is split or cracked also, worth checking.

[@thequantumcuber3261]

@@StaticModel Thank You, I will check

[@gamerhalim4717]

I have already

[@TomasLeGamer]

I want to paint a 1/48 scale m4a3e8. Should i get this?

[@StaticModel]

Only you know the answer:) If you are thinkerer and don't expect everything just to work magically by itself this kit will do the job. But first you must to learn how to use it correctly:)

[@coolcat817]

I have the exact same model. Brought it last year, and was going to use it now for the first time. I got it to do alternative reborn dolls. I noticed that in my set I don't have the moisture trap.... is it important?! Can my machine work without? I'm once again blocked from finishing a doll. If it's a necessary component to the machine, where can I find it? Anyone who can help, is my life saver.

[@StaticModel]

Moisture trap prevents condensed water from getting into your airbrush ant later into your paint. For example when you paint, big blob of water coming out from air hose can cause paint spit/splatter... Some people use transparent air hoses to monitor moisture build up in air channel. Also moisture traps are commonly available on ebay,alliexpress,amazon ect...

[@saminanajaf1717]

hello thanks for such a great review. just one question there is another airbrush w compressor from nasedal which one do u recommend .

[@StaticModel]

I can't really recommend something, I have tested only this one.

[@saminanajaf1717]

@@StaticModel thanks for such an awesome review im buyin it

[@sr.cultivo]

clean

[@Raivoization]

Is it able to spray createx collors without reducing them? Thx

[@StaticModel]

No.

[@kristofzsoltnagy1537]

Is it enough for painting 20 model cars if I use it carefully with taking breaks?

[@StaticModel]

It will work, but be prepared it might not be a nicest experience:)

[@Alan_AB]

@Scale Mods - What is the music in the video?

[@emelune]

Which machine I take for t-shirt?

[@StaticModel]

Not this one for sure, see other options in the description of this video. Go for compressor with air tank. All links are affiliate links.

[@emelune]

Thank you :)

[@raymondespera5161]

Do the moisture trap working?

[@StaticModel]

Yes, in my area moisture trap is actually catching quite good amount of water.

[@garylawlor2288]

Can this airbrush be connected to a regular compressor?

[@StaticModel]

Yes.

[@johnlai651]

Any idea about that knob next to the air outlet on the compressor? It seems like a pressure adjustment knob but how does one know how to adjust?

[@StaticModel]

Simple limiting valve, screw it down for less air and unscrew for more.

[@johnlai651]

@@StaticModel Oh boy....

[@paulyancha3604]

Can you install a pressure regulator to this compressor?

[@StaticModel]

It already has a pressure adjustment valve, instaling pressure regulator will make no sense making this kit overly expensive.

[@royal_gambit_e4]

Would this airbrush be suitable for applying paint on car scratches? And eventually lacquer?

[@StaticModel]

Automotive paint require high pressure and spray guns that generate fine paint mist while also delivering high amount of medium in a single aerosol cloud. In short words it will work but it will easily distinguishable, just like touch up markers. Cancel Reply

[@royal_gambit_e4]

@@StaticModel what about if you spray more layers?

[@StaticModel]

@@royal_gambit_e4 it will work, but you will have to experiment with thinning ratios and pressure..Also of you own a car, there is a big chance you have a compressor or a tire pump. So you can get only a airbrush without compressor and use tire as an air source. More on that you will learn from other KZbinrs.

[@royal_gambit_e4]

@@StaticModel good idea thanks

[@luizx2b]

Do you think it's good enough for painting shfiguarts DBZ figures? They are about 13 cm to 17cm Great review btw

[@StaticModel]

If you are building lots of them airbrush kit is helpful, but you can achieve great results only with paintbrush. If you think about high fidelity color blending and shading you will need airbrush a tier higher...

[@luizx2b]

@@StaticModel thanks my friend

[@elginG80]

What brand paint is used on this airbrush?

[@StaticModel]

All tests were made with Tamiya acrylic paints. For primmer test badger primmer was used.

[@robkarpati]

I got the same one pot the gun doesn't let the paint go, only air

[@StaticModel]

If thats dual action you have to pull trigger for paint, push trigger for air.

[@vinniemcintyre4987]

Yeah pull the lever back

[@vygintasaw9677]

Does these mini air brush tools can spray wide?

[@StaticModel]

Not really, 5cm as wide as it will go.

[@andrewclay1703]

rubber feet minimise what...???

[@lionheart-xt7xm]

Vibration from the air compressor when resting on surface

[@rohkhan3694]

How much is his prize, brother?

[@StaticModel]

Sorry I am not able to answer this question, cause I have not paid for it. It should cost around 60$, anything more than that is not worth it.

[@DrDreuhh]

Do you dilute your paint before using? And if so what do you use to dilute it?

[@DrDreuhh]

I’m looking to use this exact compressor for nails

[@StaticModel]

@@DrDreuhh i use coresponding thinners, usually same brand as paint. I believe nail artists use special inks for nails that are pre thinned. Base color comes with more traditional nail polish but than all the intriguing details and transitions are made with thin inks and stencils:)

[@michel-dw3vx]

Have you ever asked youre self ,............ WHERE DOES THE COMPRESSOR GET IT,S AIR ? Absolutely , NOTHING said about paint overheating

[@dylangintherofficial]

Got mine this week Doesn’t output any paint not even dyed water the thing is absolute garbage and how come everyone got this exact one for 30 on Amazon and mine costed 60 69 actually

[@mostloudest7544]

So I'm just getting into modle cars properly and I brought this exact same one the other day I'm just wondering if you need to clean it when you use different colour paints bc it will block the jets would I have to clean it with thinners

[@StaticModel]

You have to flush it with thinner after every new color. Also if you use different types of paint ex. enamel and acrylics - you must perform deep clean with airbrush cleaner in order to avoid different chemicals mixing together.

[@mostloudest7544]

@@StaticModel thank you very much for replying thanks for the information 👍

[@Izmeer]

do you recommend this to paint my Initial D model kits?

[@StaticModel]

It depends on your skill level. If you are a beginner - no.

[@linkmasters535]

I am looking for a mini airbrush kit for my models but I have to find one that the compressor is not so loud

[@StaticModel]

Mini compressors are loud, i doubt you will find something significantly quieter.

[@linkmasters535]

So which airbrush kit would be best even if it is loud

[@StaticModel]

@@linkmasters535 I'd suggest looking at most popular options, something like compressor AS186 and airbrush of your choice.

[@linkmasters535]

I looked it up and I can’t have that in my apartment room my place is like a motel converted to a small apartment complex and I don’t think my manager would agree to this now that portable one for 35 bucks maybe I just don’t know

[@StaticModel]

@@linkmasters535 if you really need quite, than go with Mr.hobby linear compressor L5, and you will also need power converter since that compressor is JPN only.

[@nathanmacauldy4610]

Can u use on trainers

[@StaticModel]

What do you mean?

[@josecarlosxyz]

unfortunately not dual action

[@StaticModel]

Model demonstrated in video is dual action.

[@nekoboygames7786]

Is it good to use with liquitex varnishes and mediums?

[@StaticModel]

No :)

[@nekoboygames7786]

@@StaticModel ok. Then I have to keep looking.

[@eatmelon0o059]

How long time paint of this airbrusu

[@gruvee9334]

Assuming your question is about the compressor, the manual says it should not be used more than 30mins. Overall, you should use it for some 10 or 20mins, then take a timeout.

[@vdsmade]

👷👍

[@stephmani7974]

Can it be used for cake?!?

[@StaticModel]

Yes, but for cake you need clear air hose and food industry certified airbrush.

[@JASHVEER22]

Big question is how many times you used it??

[@StaticModel]

Few times, its clearly not meant to be main compressor in your kit.

[@JASHVEER22]

@@StaticModel at least 10 times???

[@StaticModel]

@@JASHVEER22 I gave it to my friend who is new to modelling, he finished like two tank models in 1/35 scale and he is now thinking about upgrading it. That's a decent unit to get taste for airbrushing, but not something you can rely on regularly.

[@valentine4817]

Can we use that on Fur?

[@StaticModel]

It will depend from type of your paint. Airbrush system itself has almost no limitation for surfaces it can be used on.

[@francogarbage8550]

Está mal puesto el filtro

[@naybah60dant__customz]

Can you use it for shoes ??

[@StaticModel]

Its mostly about type of paint you are going to use. Should be fine for light usage and simple sneaker customizing.

[@naybah60dant__customz]

@@StaticModel yeah I seen it said no arylic paint n that’s the type of paint I need to start spraying on my shoes 🤦🏾‍♂️ and it saiyd in Amazon that the paint has to be thin thin if u ending u using it

[@Lostdimension]

Can i use enamel paint on it?

[@StaticModel]

Yes, but keep in mind that rubber seals in airbrush will degrade after prolonged use with strong solvents.

[@Lostdimension]

@@StaticModel Ok thanks and which one good paint for miniatures?

[@StaticModel]

@@Lostdimension I have heard lots of good things about vallejo game air colors... But if you want enamels - can't go wrong with Tamiya

[@Lostdimension]

@@StaticModel Thank you so much

[@kaydenscudder8405]

Mine doesn’t even work lmao

[@alaingattelet7833]

This one is not compatible with acrylic paints

[@StaticModel]

Stop spreading fake information, it is compatible with acrylic paint.

[@nekoboygames7786]

Actually, it says on amazon that it is not if you scroll through the pictures, but it also says in a tiny print under that it can work if used with a thinner.

[@nekoboygames7786]

@@StaticModel m.media-amazon.com/images/I/71k8RrywkFL._AC_SL1500_.jpg

[@ogdizzle155]

Would this be good for paining rc body's

[@StaticModel]

Rc body paint tend to have flexible additives, those increase paint viscosity and thickness. That's why rc body paint require more air pressure than this compressor can deliver. Short answer - no.

[@ogdizzle155]

@@StaticModel thank you buddy seen as u know more then just a yes or no answer if I was to use automotive paint and thiners would it be possible then or still to thick for the pressure of this and one last thing do u have one u would recommend that isn't a crazy price

[@StaticModel]

@@ogdizzle155 this one is more of a "arts and crafts" item and not a tool you can rely on when going for nice finish. While airbrush is decent, air pressure is way to low. For rc bodies,canvas airbrush drawings, touchup painting in real cars I wouldn't go lower than AS196 compressor and airbrush of your choice. If noise is not a problem, than invest in quality airbrush and get powerful household compressor...

[@ogdizzle155]

@@StaticModel thank you dude really appreciate the help I will look in to the compressor you suggested see what I can make happen

[@SuperElbadri]

what is the Brand name???

[@StaticModel]

Link is in the description.

[@vinniemcintyre4987]

I have a simpler compressor it only has one port and that's the outflow is that okay?

[@StaticModel]

If it works for You than its okay :)

[@carlosdejavier7773]

I bought the same kit in amazon and it quite sucks. It worked decently just a couple of times. A complete waste of money. I Dont recommend it at all

[@milkshrekpasta]

could someone tell me if this is good for painting gunpla?

[@StaticModel]

It depends how serious about gunpla you are... If you think about building lots of models, its better t o save up for higher tier equipment. This kind of setup is good if you make 1-2 models of medium quality per year :)

[@milkshrekpasta]

@@StaticModel Thank you, I was thinking about making a lot of gunpla. What airbrush and compressor would you recommend?

[@StaticModel]

@@milkshrekpasta for airbrush go with iwata neo or h&s ultra, and get any compressor with air tank.

[@milkshrekpasta]

@@StaticModel Thank you so much! This info really helps.

[@albacontreras5925]

hace demasiado ruido

[@hobbi_mix]

Компрессор через два месяца вышел из строя. Хватит предлогать людям говно. Лучше потратьтесь и купите себе мощный компрессор, которого хватит на всю жизнь.

[@shahnawazali2812]

Totale priace in pakistan

[@2ndchancediecastrestorations]

AliExpress sells it for around $40 us

[@adityapancagemilang7371]

Give me