CHEAP Plastic Saved My Ridgid Table Saw. How to Fix A R4512 Fence.

How to fix and align the fence on a Ridgid R4512 Table Saw.
Do you have this problem with your table saw?
Do you like the "Reverse Sponsor" concept?
🤝 JOIN OUR SQUAD 🤝
If you like our vibes, you should join our tribe! You can support my work by joining the Sawdust & Sarcasm Squad: / wittworks
This is my twist on Patreon. One perk is that occasionally I do a random lottery to give away all the free tools and samples that get sent to me for review.
Check out Spectrum Advanced Manufacturing on Etsy: www.etsy.com/shop/SpectrumAdvMFG
The parts that worked for me (nonaffiliate): www.etsy.com/listing/93165137...
🛠 TOOL LINKS (affiliate) 🛠
Johnson Paste Wax: amzn.to/3FfjubX
⏱ TIMESTAMPS ⏱
0:00 The Problem with the Ridgid R4512
2:50 3D Printed Parts by Spectrum Advanced Manufacturing on Etsy
7:50 Upgrading the Parts on the R4512 Fence
9:12 Final Thoughts
13:30 More Table Saw Videos (Coming Soon)
🎥 PRODUCTION LINKS (affiliate) 🎥
Sony a6600: amzn.to/3xqz3tu
Sigma 16mm Lens: amzn.to/35yB9M1
Sigma 30mm Lens: amzn.to/3vyKnlS
Wireless Lav Mic: amzn.to/3vBlkyF
Cage: amzn.to/2S3KYyf
Shotgun Mic: amzn.to/34OYWa5
Tripod: amzn.to/3zrDOom
Gimbal: amzn.to/3fQxY8g
Key Light: amzn.to/34W4FuB
38” Quick Parabolic Softbox: amzn.to/3clTorT
C-Stand: amzn.to/3uSKEje
Safety Sandbags: amzn.to/3gwRkiZ
Best SSD Drive: amzn.to/2SY7UPN
🎛 MY MUSIC (affiliate) 🎛
I use Epidemic Sound for my music. Get a 30 day trial here: tinyurl.com/3zkmh8cv
Song in this video: Mountain Brook by Dylan Sitts: www.epidemicsound.com/track/h...
DISCLAIMERS:
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
This video was not paid for by outside persons or manufacturers.
No gear was supplied to me for this video.
The content of this video and my opinions were not reviewed or paid for by any outside persons.

[@VincheroKarpintero]

That might have been the 1st "this video is sponsored by..." I sat through from start to finish! 😂

[@wittworks]

Mission accomplished.

[@brianm6253]

That’s probably the first “woodworkers”KZbin video I’ve laughed at in years. Hilarious. Well done. Brilliantly timed.

[@kennethmccullough1342]

Love the humor. It actually kept me engaged instead of jumping to the fix part. You have some talent bro. Keep it up.

[@wittworks]

Thank you Kenneth! I wasn’t sure if I should be myself. I’m glad I did! I’m going to try to keep incorporating it.

[@pwtobin]

I have been ready to move off of this saw almost since I bought it. That is, until I saw this video. Even though it is sponsored, it's very informative and even a bit entertaining. I went out and bought this off of Esty, installed it, did a bit of fine tuning, and IT TOTALLY WORKED!!! Now my fence is rock solid. This literally saved me from ditching this saw and going out and buying a $3000+ Sawstop. (for now)

[@wittworks]

Thanks Patrick! I had the same experience (and paid for the parts myself)! But...I can still hear laguna and sawstop whispering my name...

[@roberth293]

I subscribed specifically because of that sponsorship piece. Nicely done.

[@wittworks]

Thank you Robert! I’m glad it turned out well and that you liked it. I’m workshopping the next one! 😉

[@robw9171]

Just ordered mine! Thanks for this video - I'm cautiously optimistic and looking forward to giving this a try. Like you, the fence is my biggest complaint about my R4512.

[@wittworks]

It’s worked well. I need to tighten my back screw a little to clean up the play. But it’s 95% better

[@robertbales5135]

Your sponsor ship attempt was very funny and well done. I just subscribed because of your creativity and humor.

[@wittworks]

Awesome, thank you! Welcome! The attempt has proven futile!

[@mihairachita174]

SawStop should send you one table saw for sure. they did send to other people who doesn't know much about woodworking. how we are supposed to learn so many thinks from people who know what they doing if they are not sponsored by the big guys? SawStop,send this guy a decent sawstop and make everyone happy!!!!

[@wittworks]

Ha! I’ll probably just buy one soon. Those brands don’t really sponsor people unless they’re massive

[@mihairachita174]

@@wittworks Pin the comment above and you get enough likes on my comment,maybe SawStop will give you one 😅

[@gerardoespinoza7202]

Thanks for the tip, I have a ridgid R4512 and I just been so happy with the saw, no problems at all, it’s been great, quiet and smooth, I also own a powermatic 66 and the ridgid it’s much quieter than the powermatic, I just order a sliding table from Harvey that I’m planning to install in the ridgid and remove the steel extension wind, Thanks again for the tip on the fence

[@lacttech]

Thanks for this video. I have the same saw with the same problem. Glad I came across your channel. Oh, I watched the entire sponsorship.

[@wittworks]

Thank you! Still crickets from Laguna....A year later that 3d printed piece is still holding up. It works about 95% good. I've been thinking about getting "the incra fence" though....

[@palbergwerx.comcreativedir1338]

Nice fix for the older Ridgid saw fence. I don't have that issue, as after setting up the fence, I put forward pressure on it before clamping. BTW: Ridgid has a new saw, the R4560 that looks like they've re-designed the fence system entirely. I am not aware if the fence/fence rails may be backwards compatible with the R4512/20. A full draw of 13amps on a single phase 110 circuit with 65% efficiency will give you approx. 1.25 hp.

[@harrydavis6903]

Love the sponsorship. I have the same saw and the same fence problem. I am ordering the parts. Awesome, thanks and thanks for the laughs, I needed it.

[@wittworks]

Thank you Harry. The parts have been working out great! I love my saw again!

[@harrydavis6903]

@@wittworks _ You could easily make bank doing the comedy thing. You make the folks on Saturday night live look like amateurs. You even resemble one of the comedian actors, but I can`t remember his name. I have ordered the parts and am looking forward to making cuts a bit better. Any improvement will be appreciated. Very happy that I found your vid. I am now a new subscriber. Thanks again, friend.

[@wittworks]

SNL, do they still do comedy? 🤪 Much appreciated! I look forward to hearing how the upgrades work for you! My email is [e-mail]. Send me some pics when you get it dialed in!

[@harrydavis6903]

@@wittworks Will do, my man. Have you had any problem with your cast-iron top not being perfectly flat? I put my 24-inch straight edge on my top and seem to have a slight dip to the upper left of the blade. I look forward to more of your vids.

[@harrydavis6903]

@@wittworks No, SNL no longer does real comedy, just partisan political attacks and other meaningless garbage.😐

[@mgn151]

Came for the fence fix, stayed through the sponsorship read. That was Frank Howarth-level editing magic. That's the kind of sponsorship I can get behind. And afford. Now, to get my fix ordered.

[@Bonkers4747]

Wow, what a grate Video!! Amazing. Absolutely perfect!!!! You are right , I would also not put this saw into trash. Good job bro!!!!

[@wittworks]

Thank you!

[@dooleyfan]

Great video. I have been fighting my R4512 fence (fencing with my fence?) for the past two days. I didn't realize how bad it was until I measured it with a dial indicator. Then I almost stripped the fence adjuster bolts trying to get it true. I've had the saw for seven years, and up until recently the fence's inaccuracy hasn't been a problem as I hadn't been doing precision work. But now that I'm building jigs for furniture making, I finally realized how bad it was. I will be ordering.

[@wittworks]

Such is the story with these saws! You’ll be impressed with the 3D printed fix. Tell the seller I sent you. (I get zero kick back or commission)

[@dooleyfan]

@@wittworks Will do!

[@gregh9629]

Awesome video!! Keep up the great work

[@michaelcoccojr2513]

New subsciber here, love your work. You'll laugh you'll cry, you'll break windows with saw kickbacks. I'd be happy to take your ridgid saw after Laguna sponsors you!

[@MrFFP123]

I just ordered the upgrade parts for my 3 year old RG4512! I dont have the slop issue that you did, thank God, but it does have a slight toe in when locked! Also ordered the improved over the blade dust collection port from them! Great video glad I found it ! Hope Laguna sponsors you !!

[@wittworks]

Thank you Gregg! I have the over the blade dust hood too and it works good! The seller is awesome. Tell him I sent you (I get no commission). As far as Laguna - we’ll see. They’re not big on sponsoring ANYONE. The more I think about it, Sawstop makes more since. It’s just an insurance policy wrapped up in a hot dog protecting tool.

[@bretticus4]

part ordered! good review, thanks. i have a R4512 i picked up used a year or so ago; apparently ridgid changed the lift design at some point so mine only has 3 casters and a pedal on the left side instead of the front. makes it a lot more cumbersome to move around than the style you've got. glad it's there but wish it was the 4-caster style.

[@wittworks]

Thank you! Fascinating. Didn’t know about the three caster. Weird. You’ll love the fence fix.

[@MrKen-wy5dk]

I came within .5 seconds of clicking ahead. You made my day, except for some really funny cat videos I saw earlier. Subscribed. Keep it up.

[@wittworks]

Ha. Thank you. Cats: 1 Me: 0

[@tsaltyginger]

I think the coolest part about your videos and channel is that you're from SA. I just stumbled upon your channel and have enjoyed some of these videos.

[@wittworks]

Awesome! Thank you! You local? 🌮

[@tsaltyginger]

@@wittworks was. Born and rasided but then moved south to Corpus.

[@yLeprechaun]

Dude!! Thank you! I have a rigid. Different saw, at least in look, but it has the same fence. I have noticed mine developing a slight amount of slop. I'm ordering these TODAY. And... I enjoyed the " sponsorship " portion. Ok, off to click the sub button.

[@ericledford5095]

Well done .....I could see your channel taking off at some point. Your sponsor skit was funny and unique or at least I haven't seen similar anywhere else. As for the saw....I have the same model and have been fighting the same fence issues for a year and a half. I knew those nylon cleats were the issue, glad I found your video, going to order them as well. Good luck w your channel

[@wittworks]

Thanks Eric! That pesky fence. A year later the fence is much better and has held. However….I’ve been eyeing “that Incra fence”….and I might take the plunge. Just wired the saw to 220….dang. You got to do it if you have the ability to supply 220.

[@alanbortolussi4022]

Great info video about the Ridged 4512 fence problem,after watching I ordered the fence fix parts from Etsy,solved my same sloppy fence rail play.Cuts are more accurate on this weekend woodworker table saw now,just remember what I once leaned from a old finished carpenter, Wood always moves this is why machinists and tool and die guys cant be woodworkers,nothing is always going to be exact.

[@southernyankeewoodworks]

Great vid, thanks for sharing.

[@workinghand5768]

Dude, you need to take your act on the road! Extremely entertaining and informative. I have this fence on a older craftsman saw and this looks like my fix. It was a much better fence than the original, but has these same issues. However the parts now cost $36.00. A small price to pay for a safer saw.

[@wittworks]

Thanks! Its still working a year later! Not perfect, but 95% better.

[@cbcarper9681]

Super video I really enjoyed it and yeah your twin brother I enjoyed him to keep up the good work

[@davew5508]

Thanks for the video waiting on them to come back from vacation and will be ordering and dropping your name in the comments

[@wittworks]

Thanks! I saw he was on vacation today. He has a dust hood for the blade I’m interested in

[@woodworkingandepoxy643]

Best sponsorship ever 😂

[@adamduerr1203]

Good sponsorship.

[@davidallen4020]

Bro… first video I’ve seen of yours and subscribed within 3 minutes. Freakin hysterical and just overall great video.

[@andyharrison4393]

Ive been looking for this fix for awhile! Great vid. Also as a fellow alamo city sawdust maker ill hit the subscribe button too. Win, win. Thanks.

[@wittworks]

Nice! 🌮

[@thegoodfight365]

This was an extremely witty video. 🤣 thanks for sharing your experience.

[@wittworks]

Thank you! I also just sold it yesterday for a hotdog

[@kenerickson4923]

I have the Ridgid 4520 and the fence has always been good. I did have problems with the blade height adjustment twice. Ridged replaced entire saw the 1st time because there was a problem with the motor and it wasn't available. The 2nd blade adjustment on saw number 2 had broken parts that are no longer available. They sent me saw number 3 last week. Be sure to register your tools. I now have 3 rip fences and many other parts.

[@bruceswiegers9935]

Love the humour!

[@wittworks]

Thank you Bruce!

[@billybike57]

Love the sponsor bit👍🏼

[@wittworks]

Thanks!

[@1975oldschool]

"Don't hold that against them" LMFAO!!! :🤣 Go Mavs! Great and hilarious video man!

[@wittworks]

Thanks

[@alanmatthews9260]

I have that saw and initially I did struggle with the fence. But, what I did to compensate was to push forward on the fence before locking it down and it works great. It would be nice though to keep it from toeing as it slides

[@VincheroKarpintero]

Laguna!!! Show this man some LOVE!!!

[@wittworks]

Preeeaaacccchhhhhhh

[@sovannahong6472]

Yes. Mine does the exact thing. I loosen the screws and tapped it straight and re tighten. It's a nuisance. I'll give this a shot. Hopefully it'll lessen the times I have to re align the fence.

[@wittworks]

almost a year later it's still working great for me!

[@nialstewart8263]

That looks a _lot_ better. 👍

[@wittworks]

I know! I didn't realize how much play was in it until watching the video. It was terrible. The fix isn't 100% perfect and it's not buttery smooth like a proper high end fence, but, for $28, I'll take it.

[@johnnation713]

I love private companies and yes hats off to this guy/gal for figuring this out! I think Ridgid should give him/ her a portion of the sale proceeds after this product launched. Just my thoughts😊👍Thanks Witt’s works😊👍

[@bobsnow1996]

I watch two to three You Tubes woodworking videos with my coffee each morning... you produce good stuff! I have a Ridgid 4510 the slop in the fence is just awful, I'm constantly checking and rechecking accuracy.... That being said I picked it up at a yard sale for $150, it was used for rough work (Outdoor building) and I put about another $200 worth into it... Zero Insert, 80 tooth blade, made a really nice precise crosscut sled.... but the fence... S#$@'s just horrible! At night I dream of a Saw Stop or a Laguna being dropped off at the house and then I awake to the fence from Hell... On the brighter side for Christmas I received a Makita corded Track Saw... that is a game changer almost as good as my Saw Stop or a Laguna dreams!!! Good videos and I like the comparisons especially on the Track Saws... this is where the future of DIY woodworking is leading I believe... not so much large table saws but small, well build, quality table shop saws... keep up the good work enjoy the videos!

[@Einstejn]

I've learned to work around the issues of this saw; all you have to do is put forward pressure on the fence with one hand and clamp it down with the other and it will be perfectly straight every time

[@wittworks]

I used to do that and the problem got worse and the trick no longer worked 😑

[@msk3905]

Yeah I’d do the same two years later still accurate and I never had the slop that he had in his fence. I check the accuracy often because I don’t trust factory fences and no complaints so far.

[@chpohlman]

will this also work for the r4514 portable saw?

[@jrbarton3059]

Thanks for this! My ridgid fence wiggles and it’s so frustrating to use.

[@wittworks]

Thank you! Mine is still dialed in and working good.

[@JBatsche]

Hahaha this is too good man, and I’ve known you for years… had no idea you had a twin with a dirty mouth 😆 Keep up the awesome work and hats on to ya!

[@wittworks]

🧼 I learned it from you.

[@romanjohnston]

I have the portable jobsite saw....put a VEGA Fence on it. LOVE that upgraded fence. Worth every penny. Fence was horrible on that one too.

[@robertmarich849]

Does this work for the 10 inch work site Rigid?

[@tpmcdonald]

Love your content! Question for you since you have done a lot of research on this. Do you know if this problem is on the R4520 also?

[@wittworks]

Thank you! I’ve gotten the question a lot and don’t think so. I asked the seller on Etsy and he thinks it’s a different fence.

[@wittworks]

I double checked my message to the Etsy seller and he confirmed the 4520 isn’t compatible. Ridged is fond of making tiny tweaks. INSTEAD OF FIXING THE EFFING FENCE

[@tpmcdonald]

@@wittworks Oh wow! Thanks for the feedback!

[@wittworks]

You’re welcome. Hope you find a good solution. I know how frustrating it can be and how it takes the joy out of the table saw.

[@asphalt9cheaters811]

I have the 4520, upgraded from a job site saw. Big difference. I’ll admit though, after reading reviews of the fence I never even installed it. Upgraded to a biesemeyer style fence. But my best upgrade rivals the incra @ $100. Wixey WR 700 digital fence readout. Best purchase in my entire shop.

[@wittworks]

I’ll check it out! My friend just got the incra and it took 20 weeks to get it. Which fence did you get?

[@AshB911]

@@wittworks I got a “Align-A-Rip” fence you probably won’t get it in the USA. But I have 56” rip to the right of the blade. With drop dead accuracy and repeatable cuts thanks to the wixey.

[@wittworks]

Got your pictures. It looks great! I wish I could find it here.

[@bennolen7801]

I have the Laguna Fusion F3 and love it. Highly recommend. I had the Rigid before that. Good saw. I had the Very Super Cool tools fence on it and it was very accurate. Check it out if you haven't before.

[@DarrinSK]

hey man thanks for the tip

[@raymondmarsolais519]

I bought mine used and it had terrible slop. Took me way to long to try and fix it. A few small walnut shims CA glued onto the portion where the fence meets the rail completely eliminated the slop for me.

[@DJ_Eye]

Anyone knows if this will work on a ts24241? The fence looks the same

[@randyrice7214]

The video really starts at 7:51. That's when it gets relevant and good

[@dgillespie13]

The saw stop hot dog had me. Spit up my Diet Coke. Thanks

[@wittworks]

Thank you

[@TheFalconJetDriver]

I have the 4512 and if you had registered the saw when purchased Rigid would stand be hind the saw! I did and they replaced 3 fences. The extrusion was not parallel with the miter slot or the arbor. I agree the fence was junk until I got a good one. However I still replaced the fence with the Incra TS LS wonder Fence system. Yes it cost more than the saw. That was 5 years ago. And I do not regret the purchase. I use to install CNC machines in the early 80’s so I am pretty anal when it comes to precision. I have a calibrated master Plate and dial indicator for alignment of the arbor to the miter slot then the fence. When I set my fence for a 4 inch cut I get a 4.000 cut measured with digital calipers. Yes wood moves with moisture content. But I am West Texas and that is not a big issue here.

[@emostorm7]

The Delta, has a great fence, so if you're trying to decide which saw is better....😏

[@awlthatwoodcrafts8911]

I have this saw and I've had issues with the fence from time to time. I end up measuring the front and back of the blade to the fence. If it's off, I loosen and retighten the fence, pushing forward as I do, to make sure it's lined up and doesn't move. I have ordered that little upgrade kit but I have not installed it yet. The first time I tried, it was not usable and I didn't have the time to file/sand the parts down to make it work. I will in the near future, though. I wouldn't want to waste $28, you know. There is another inexpensive upgrade you get get for this say and it is the TABS, for aligning the blade. That I have installed and it is great. So easy now to align the blade. you don't have to do as much back and forth of tightening, loosening and retightening to compensate for everything moving when you tighten down. No banging on the motor or finding a long enough, and strong enough, screwdriver to fit through that little hole, either. Just a slight turn of a hex nut. Fellow San Antonian here, as well.

[@wittworks]

That’s cool! How about the cooler weather and rain?! I had to send down my parts, but it required very little. I sanded slightly more than I needed to. It’s pretty easy. Just took more effort to get me in “the mode”.

[@awlthatwoodcrafts8911]

@@wittworks the heat island effect seems to be working against us here on the west side. Got cheated the last couple of days. Loving it being cooler though. Summer was brutal.

[@kaden7298]

I fought over 5 years with this fence. Upgrade it with these plastic and all kinds of stuff. Still have issues. I finally give up and replaced it with the Vega fence and rails. Best decision ever! Ridgid makes great plumbing tools but carpentry tools are horrible!

[@jerryquesenberry2520]

Your crazy fella. Pretty freakin' funny though. Didn't know you had a twin!😁

[@sneakyblackdog]

I was researching after market fences for my 4512 and was going to place an order for an incra and ran across your video then saw a guy up in Canada did the same thing so I figured wtf and ordered the parts to give it a try. I also ordered the TABS table saw alignment block set just to make it easier to adjust the blade they're in the mail should be here in a few days. I'm enjoying your videos and Thanks for the tips

[@wittworks]

Thank you! Let me know how it goes! My friend got the Incra and it took over 16 weeks to get in.

[@sneakyblackdog]

@@wittworks the wait time is longer now,my shop is bone chilling cold in the winter so I got a couple of months to order one for mid spring delivery so I got time for a few hacks and if they work I save money if they don't I got time to wait

[@DaveInTrinity]

Great info. Has anyone tried this with an older TS2412 fence? Are they the same fences as the newer ones? Tia

[@wittworks]

thank you. I don't think they work on other models. Ridgid is fond of making micro tweaks between models (and never fixing the real issue)

[@DaveInTrinity]

@@wittworks Thank you. After a ton of tweaking, I finally got my fence 100% square and solid, as designed. This mod would still be nice though.

[@BC5391]

My ridgid saw is 25 years old, never thought of doing that, warming up the 3d printer now

[@wittworks]

😊

[@5309backbeat]

I want a sponsor too -lol

[@justkjthings]

Go Spurs Go

[@wittworks]

😩😩😩 I remember the good days

[@jjbeastgaming3813]

Is it compatible for a ridgid4518?

[@wittworks]

I’m not sure. I doubt it. Ridgid is known for changing little things on each model. You might reach out the seller and ask.

[@kaden7298]

I have same issues that’s why I’m here 😂

[@johnnation713]

Did you get the Laguna?

[@wittworks]

No. Saw stop. To save the hotdogs.

[@icelandicigs]

I need this. But live in Canada. Over $70 bucks after shipping... gimme a break!

[@CaptainofmyShed]

This saw is available in the UK under the brand “Lumberjack” Ive been tempted but the fence issues have put me right off.

[@wittworks]

The fence is terrible. I’ve been thinking about upgrading to the Incra fence…but…it’s almost the price I paid for the saw!

[@handymanny1135]

What was the name of the product where can I order it

[@wittworks]

The link to the etsy shop is in the description near the top

[@vmoutsop]

Yeah, funny😂

[@CrisAnderson27]

They're $36 now, lol. Still worth it, the stock fence is the biggest PoS I've ever seen on a power tool.

[@wittworks]

Def worth it. Ended up selling the saw.

[@bobclifton8021]

You said it the title $0.20 saved your day. In the end it was a few pennies more than that. I just ordered a set for $33 and change.

[@wittworks]

The cost of the plastic is $0.20. I explain how I figured the cost at 6:00

[@bobclifton8021]

@@wittworks If it works it's worth it. I wasn't complaining about the price.

[@wittworks]

It’s still working and has made my saw useable again

[@bobclifton8021]

@@wittworks I bought the kit and it's sitting on my work bench to be installed.

[@Sean-tc7jm]

You get a Like and Subscribe just for being local to me. Excellent vid. I’ve been having the same problem with my r4514 straight out of the box. Go Spurs Go! (Or this time of year, Let’s Rodeo, San Antonio!) I’m out in the Victoria area, but a San Antonio native.

[@wittworks]

Gracias! Thank you 🌮

[@JohnDotBomb]

13A*120VAC/746 W/HP = 2.1 HP 3.5 is totally possible if 240 V

[@wittworks]

You’re a genius. I’m going to wire it soon. When my electrician friend comes over. 😀 it feels like it’s running at 1/2hp - but I think that’s because of the dull blade and the toed in fence.

[@j.frankparnell3087]

Of course, at 240V the motor will be drawing only 6.5A. So the HP will be the very same at 120V and 240V. And since electric motors rarely run at 100% efficiency, that theoretical 2.1 HP is more like 1.75 effective horsepower. Ridgid's claim of 3.25 HP is likely based on the theoretical peak HP that the motor will produce right before it explodes, multiplied by their own marketing BS factor.

[@wittworks]

That marketing bs factor!

[@MrLulzCakes]

I have this table saw and hate it also. I also bought some 3D printed pieces but it hasn't helped any. I've spent hours and hours trying to solve it but I'm just fed up.

[@timothyoutman7427]

Routers have 3.25 HP motors 🤷‍♂️

[@frankherring6253]

Two months after you made this video, Johnson wax stopped production of their paste wax. The management should have their bag slit and a leg run through it.

[@wittworks]

Noooooooooo. I didn’t know that. I just opened my last can a few days ago. I’m going to run to the store to see if there’s any left. F.

[@cangooner]

I have the R4513 saw and its fence is TERRIBLE. The saw is fine, but I've never been able to trust the fence and it would be great to fix that. Anyone know of a similar fix for that one??

[@wittworks]

Ridgid likes to change tiny things from saw to saw. 🙄 I haven’t found a cheap solution for that one. Seems like the Incra fence is the best way to go if you love the saw (but it’s about the same price of the saw!)

[@cangooner]

@@wittworks thanks. That's annoying on Ridgid's part. Last night I found John Heisz's homemade fence video, bought the plans and am going to go that route.

[@wittworks]

That’s cool! He’s a brilliant designer.

[@billyjay4672]

Ha I was just about to give the thumbs down. But hey wait what's this twins, clones no just a decent guy with a sense of humor. I like it, and I like what he said keep up the good work. Different but interesting.

[@wittworks]

Thank you Billy.

[@andyweyer]

Has anyone tried this on the R4518?

[@jjbeastgaming3813]

Has it worked for you?

[@emostorm7]

That was a witty vid tho bro

[@dantediego]

whats up with the 0.20 in the tittle?

[@wittworks]

the cost of producing the 3D printed part is $0.20 (but the seller obviously sells it for more and makes a huge profit) - see 6:10 where I explain it

[@terriswindle9484]

Hilarious

[@mattltech]

$500 saw? Damn prices suck now.

[@wittworks]

Yeah I was surprised to see the $200+ increase these days

[@JBatsche]

And… I feel the same way about the dumb Samsung ice machines in their refrigerators, what a joke.

[@wittworks]

your ice machine is broken too? Mine broke 13 months after buying it.

[@BigLousWorkshop]

sorry man... I'm normally the king of goofy bits in a video... and I tried, I really did... but I ended up skipping your "sponsored" section cause I just wanted the info on how to fix my fence.

[@wittworks]

Great! After you fix the fence, you could crack a cold one and sit back and enjoy it another time 🙃 The fence fix is holding up great and is 99.9% perfect.

[@LuisPa247]

Must be nice to have all the money to buy expensive tools and shit over the tools other people can only afford. Good job, expect so many views...

[@wittworks]

You're right. It is very nice. Work hard and smart and you can do it too.

[@mohedaicebear]

waffled about the plastic and didn't show us a second of taking off the parts that's very poor for a 10 min vid