1969 Camaro with LS3 Swap is ALIVE and She is ROWDY!

[@lanceperone6691]

Man this gotta be my favorite channel on all of KZbin right now

[@iamrichrocker]

clean and tidy work..like everything else you have done..attention to detail..have a great Labor Day folks..

[@jesusleal1496]

Boom baby! That feeling when you turn key and it fires up!

[@ChrisSullivan69]

Nothing like it!

[@nescaferacers3145]

Yes! I just picked up the “same” combo for my 67. Your videos are extremely helpful with my project!

[@brian2359]

Congrats Chris! She sounds awesome!!!

[@waynemalcolm7381]

Good channel bro! Learned something.

[@sethmargadonna502]

Damn man! Sounds so good! Can’t wait to get caught up on the videos and see the final product!

[@nickavoglia8872]

Thanks Chris for these videos, got my 69 Camaro lS2 swap started by following how you did yours. Much appreciated sir.

[@ChrisSullivan69]

Awesome!

[@NewEdgeDesigns]

This is spectacular!!! Maybe you can get a few rides out of her before the winter…

[@SuperOperator4]

Nice low idle, and sweet chop!!!!

[@bmwe30guy]

Page popped in my feed for the ctsv, stayed for the 1st gen. Prior ls1 swap 1st owner as a daily beater

[@davejewett3606]

Just ran across your channel, right on I’m doing almost identical build on 1967 firebird ls3 with 4l70e , Ridetech 4 link 9” ….lol

[@richardmckee7993]

Bro thats juss frickin awesome!!! Your a beast

[@smoov1320]

I kno im not the only one that smiled when the car finally started to idle properly

[@williammitchell5678]

HELL YEAH!!! GREAT WORK!!

[@jimmywhitlow2012]

Beautiful ride man!

[@gearsandrpm4776]

I love it brotha. I felt the excitement 👌👌👌

[@cliffjamerson3107]

Yes sir

[@Adam_S281]

Man I’m sorry the Camaro content doesn’t bring the views, it’s a badass ride!!

[@ChrisSullivan69]

KZbin is funny like that. $5k cadillac gets all the views but a $100k camaro doesn't get many 🤣

[@jvssgod]

This is good stuff bro! Can you link the video you mentioned at the end of your video on upping the values of throttle position vs pedal position?

[@CruzSoClean]

Heck yea bro🔥🔥🔥

[@ulisesfernandez5732]

Love watching your videos bro, 💪

[@Termin8r27]

No neighbors but your wife is probably like WTF!?!? LOL That's exactly how loud I like my cars. :cheers:

[@camielondon3333]

Sounds awesome

[@MrLiipasin]

Hey Chris! I really like your work and videos. In my opinion best car video's in youtube. I understand you're a big chevy guy, but i would like to see you buy and modify an dodge viper, any gen, is this an idea you would consider doing? Thank you for your videos!

[@jerico5660]

Awesome work dude!

[@kennyhayes8488]

Love your work an dam do I love your cars .you are bad ass you got your shit together .your shop an ever thing is bad ass .you my favorite Channal love it all keep up the good work.

[@ChrisSullivan69]

Thanks brotha 🤙

[@jesseaviman]

What 2 post lift do you have, love it. Give us some info on it!

[@Nightfall68rs]

Awesome Job!

[@RowdyWhipsJT]

You plan on keeping this one?

[@timothykiggins1601]

Chris, where did you learn to do all this? I really love the Camaro, dude it is really sick!!!

[@ChrisSullivan69]

Spending time in the garage!

[@petercarey6883]

Ha, Ha. I spend a lot of time in the garage and ultimately, I just fall asleep. 😉 You are a master of the understatement! Don't sell yourself short. Save the Wave 🙋‍♂

[@michaelyoshino9124]

Quite the build, but after the Z06, I wouldn’t have thought anything less. Nice job !

[@Nightfall68rs]

​@Chris Sullivan how are you going to route PCV on this motor, with or without a catch can?

[@ChrisSullivan69]

Catch can

[@trentdawg2832]

Awesome job

[@hugopadilla24]

Did you added cool lines for the transmission or did you delete them?

[@petercarey6883]

Maybe you've mentioned it before, but your coil pack re-location was that done with a kit? If so, I'm curious about re-locating the coil packs on my '10 GS and would appreciate your advice. Thanks in advance. Thanks. Save the Wave 🙋‍♂

[@ChrisSullivan69]

"Kit" I put together. I discussed in a previous video. Brackets can be had on ebay or Amazon cheap, and you make your own wires. C6 is perfect car to relocate coils as they fit easily in the fenders. You can see them in a lot of my z06 videos

[@cooterbrown7681]

Damn right 🥳🤠💯💯💯

[@richiehayes4686]

What is that blue wrap over the fenders called/where do you get it?

[@janeflinn]

When will we see the finished 69 Camaro with the dash etc.?

[@ChrisSullivan69]

In the works as we speak

[@johncarson5684]

Really enjoying the Camaro build! Working on building my shop and it has low(er) ceilings like yours. What brand and model lift did you go with? Would you buy again? Thanks!

[@thadc.6586]

👏🏻👏🏻👏🏻👏🏻

[@159770]

Chris what do you do for a living to be able to afford all of this?!

[@mattharper588]

In one of his videos he said he has a 9 to 5 desk job and in another video he was wearing a hoodie that said Port Authority Operations Management so you’re guess is as good as mine he has a beautiful house and in other videos I have seen his golf clubs and a kayak so he must be active

[@ICXCNIKA-conquerer]

Hey mate how high can you raise the car on that two post hoist in your shed? Paul Australia

[@ChrisSullivan69]

Enough to roll around on a stool under it. Ceilings are less than 9'

[@bigfireburntire]

Chris, where did you install your MAT sensor? I can't find any info online on where to install on an LS3, as Holley doesn't use the oem MAF sensor. Thank you in advance!!

[@ChrisSullivan69]

Right in the intake tube

[@swift__]

Ooh wait I don’t have any neighbors 🤣🤣🤌🏻 that’s the way to be🤘🏻🤘🏻

[@ChrisSullivan69]

Can't piss them off if they don't exist

[@aumetalmental8403]

...just wondering if that was the best place to put your coil packs, right above those headers??? 🤔

[@tracozzy]

What motor mounts did you use?

[@ChrisSullivan69]

Holley

[@jessemarinjr6374]

GREAT TROUBLE SHOOTING !! JESSE VIA LAS VEGAS

[@timothythomas1737]

Sweet

[@fixitdaniel]

Hey love your channel but got a question iam trying to do good b rolls on my channel like yours any how help full tips on how to make a great b roll video when iam doing a build or fix.

[@montecarlo6.0turbo]

My monte sounds like that very loud at idle open headers

[@trentdawg2832]

You know you can flip the fuel rail and have it come in on the passenger side……..unless you plan on running corvette coil covers

[@ChrisSullivan69]

Didn't know that. I'll have to check it out

[@67camarowhitelightning]

I did it on my LS7 swap worked great

[@jeremysullivan1794]

Sounds great

[@waltergoodwin4304]

Sweet