CHURCHILL Mk. I - Heavy WW2 Tank - QuanGuan 100238 (Speed Build Review)

CHURCHILL Mk. I - Heavy WW2 Tank - QuanGuan 100238 (Speed Build Review)
**************************************************************
👍 Buy QuanGuan 100238 CHURCHILL Mk. I on:
► MISINI Store (Affiliate Link): www.brickmeet.de/gtyg
► Amazon (Affiliate Link): amzn.to/3u9R5Rm
⭐⭐⭐MORE COBI SETS ON AMAZON:⭐⭐⭐
► Amazon (Affiliate Link) amzn.to/3cHX4CM
**************************************************************
Join me on:
Instagram / mybrickmeet
Facebook / brickmeet
Blog German: www.brickmeet.de
Blog English: www.brickmeet.com
**************************************************************
Support me on Patreon / Unterstützt mich auf Patreon
► / brickmeet
**************************************************************
As an Amazon Associate I earn from qualifying purchases.
Als Amazon Associate verdiene ich mit qualifizierten Einkäufen.

[@dummmonke4269]

Thank you for the translation of #$***T#5&&&§!+#*+*** or otherwise I wouldn't be able to know what it meant. But on a serious note, QuanGuan made the hull absolutely stunning, the hull is really great. I did have a word to say about the mantlet, but a commenter told me that a Churchill I with a flat mantlet was quite normal, so thank you commenter! Everything is absolutely fantastic!

[@BasicallyAsandbag]

Bruh some of those tank have that turret too

[@MIIRBH]

Most churchills had flat mantlet because it was easier to mass produce because it was harder to cast the whole turret and put the 6 pounder

[@dummmonke4269]

@@MIIRBH I honestly didn't know that. Thank you for telling me.

[@teamcosmo]

,mmmmmmmm

[@futpofutpo7444]

Eeee

[@coffeeinhandproductions3238]

Despite poor quality the design is really good. Didn't expect a model molded engine to be incorporated in a building blocks set. That's a new one even for me. Still looks like it displays well, and at the very least the treads function properly. Thanks for the third party build. Would be interesting to see more of these.

[@osmacar5331]

it has the 75mm not the 2pdr, it also has the Churchill mk3 turret not the mk1.

[@Larry-Lobster]

@@osmacar5331 Mod the front and you’ll have a Churchill III

[@osmacar5331]

@@Larry-Lobster how about you shut your mouth with your sensibilities XD

[@MJ-in9od]

I personally bought this set and I don't have any of these problems, the driver and gunner hatches close smoothly, the engine hatch opens with relative ease and the tiles have fine quality. I also had no difficulty with placing the section around the hatches on. Still a great video ;)

[@chiefington]

lucky

[@vojtasjedyny]

@BrickMeet You're more and more bold with this editing. I'd say even violent and cheeky.

[@revvingnoodle7192]

I have a feeling that the competition for military brick sets is heating up, and lego has no idea what they are missing

[@The_lord_no.1]

If there is a competition cobi might just take the lead

[@Larry-Lobster]

@@The_lord_no.1 Cobi is the gold standard but other brands like Sluban, QuanGuan, and Sembo are getting more and more competitive. And that is ignoring other brands like Panlos & Kazi that make gigantic but very detailed brick-tanks. Its funny cause all these brands are Chinese while Cobi is Polish. But Cobi has had time to mature and I'm sure these Chinese brands will also improve with time.

[@netbrix-brickbuilder]

New brick reverse skill by close-up is very good. It's the first BGM I've heard on this channel, and it seems to match the military. Good job!

[@diaoaowksjakaoalqknsnssjaklas]

Another set we need from Cobi!

[@grimmfoxy614]

Your videos are amazing! It really helps me to know which to buy and those that have poor quality. TQ SO MUCH!🥰

[@huss4r1813]

Second attempt at futilely asking brickmeet to review the cobi gneisenau.

[@sheetals.1912]

May I ask what's that?

[@randomguyonyoutube9252]

@@sheetals.1912 German battleship in WW2

[@sheetals.1912]

Highly detailed model. Its amazing that quanguan topped cobi on this one (its just my opinion though). Great video, waiting for your review on the T-72. One question though - why don't you show the minifigures of the quanguan sets to us? It would be interesting to note there differences

[@willknowler8194]

DId they release a T-72?

[@zergling05]

for legal reasons here in Germany, since the QuanGuan minifigures could infringe the 3D trademark of Lego

[@ZETH_27]

They more or less took cobi's model and added stuff inside. If this design was made by Cobi that'd have been amazing since they stopped making their Churchill I, which is really sad because I wanted one :(

[@MJ-in9od]

he already made one on the t72

[@Larry-Lobster]

@@ZETH_27 That is true but I'd say its an improvement over Cobi's with a better looking turret and nice interior. Their only downfall really is the worse quality bricks. That said, both version of the tank look much closer to the Churchill Mk 3 than the Mk. 1.

[@dmlegoproductions]

Extremely nice sound effects there.....

[@aqharhaythammohdnahar5328]

Next time can you review a quanguan Cromwell

[@marko3096]

Interesting , first time seeing this , must be a new model , the tiles don't seem to ever improve , nice for showcase still I'd like to recommend the Lwck lewan t 14 armata , have not seen anyone done it but it's of nice quality , looking forward to it

[@Der-Vett]

Hallo und guten Abend @BrickMeet 😊.... Das Teil gefällt mir außerordentlich gut 👍🏻... Vielen Dank für die Vorstellung... Da kann man schon über eine Bestellung nachdenken 🤔 😜 😜 😜. Liebe Grüße 👍🏻 P. S. Eine super Alternative 😊😊😊

[@fio9340]

very good

[@runtyv4722]

4:19 XD

[@polo86cfahrer]

Danke fürs vorstellen und damit habe ich die Bestätigung dass mein Set kein Ausreißer bei der Fliesenqualität war. Die haben sich bei mir auch überall hochgewölbt und weggedrückt. Dabei ist das Modell ansich sehr schick und auch der einzige Klemmbausteinchurchill derzeit am Markt. Und die Klemmkraft ist mittlerweile gut, hab auch uralte Quan Guan Sets wo das auch noch garstig schlecht war.

[@televisiontime4761]

Cool tank! Do you think you can look into the Omaha bricks king tiger?

[@koko4533]

I like your building videos, and was working on the same tank this afternoon, I really hate the turret part, because with this tank, Quan Guan brick only uses one stick which is mounted onto claw shape bricks, and more, that stick is too short, when I try mount the main gun and secondary gun on the stick, it's either the stick slippers to the other side or claw shape bricks lose up. I feel a bit down in dealing with poor brick quality,, but over all , it's a good tank

[@michaelberhorn2779]

50 shades of tan... Meiner ist gestern angekommen. Die Fliesen Qualität scheint sich nicht zu bessern. Ansonsten sieht der Churchill ganz gut aus. Wie immer tolles Video

[@meindertkoster4239]

thankk you for opening it i was about to buy it but this quality time is really bad

[@Darkbro_xl]

So the turret k-lls the people if there head is sticking out from the hatch?

[@igorbanasik2310]

Brickmeet plsssss asmr plsssss

[@vietnamvoich4142]

You have a colorful box

[@leoeckert2825]

Welcher Maßstab ist das?...1:28?

[@niety660]

Can you build lim 5 ?

[@Dreju78]

Do you often habe to use a hammer with these?😉😁

[@stevenicebear-robloxmore9975]

pls show us the mini figures next time

[@Tattama-yakitori]

めっちゃかっこいい(´∀｀*)頑張ってください！

[@anhduy5603]

the engine parts of all Quanguan sets are built with molded parts, I think they should switch to building with lego bricks

[@SomRandomDude]

Ngl, it doesn't look bad.

[@TheTankArtist]

And has an interior

[@andrewkb44emanoel11]

could you make one from kb2 again

[@emirveworldwar4185]

Make to chi ri tanks plase.

[@medium_]

I want to note that this is the first churchill with the tower of the third

[@Angelthewolf]

Small correction, the Churchill is an infantry tank and not an heavy tank

[@kotikvtanke2349]

Ah, a fellow british classification enjoyer, i see.

[@Angelthewolf]

@@bloq6758 for me it always is what it was called officially lol

[@umafelinasuperior6867]

The Churchill mark VII due to it's armor was called the Heavy Churchill, it was better than the tiger armor

[@idkwhyuhere6815]

When the next cobi

[@AmonGus-mp1tp]

4:20 - 😂🤣😂🤣😂

[@Jerson3248]

Why cobi isnt doing anything witam copies

[@BRuff-jy7ee]

Kinda early for me I'm still awake at 5:12 am

[@user-eu1xl5xs6s]

🎉

[@panzerfury8258]

Tank КВ-6

[@andrewkirkland1452]

Only the hull is a mk1 the turret is clearly a later mark 3/4 and the gun looks like the 75mm.

[@PanzeDivision]

This is a Churchill I with a Churchill III turret and a Churchill VI or VII gun. In short, this is a fabrication of WoT.

[@thehalowarrior815]

Hi can You said me where u get it please

[@BrickMeet]

Description?

[@zergling05]

@@BrickMeet ....lesen und/oder google zu benutzen, ist wohl in der heutigen Zeit sehr schwer...im Prinzip kannst du dir die Arbeit mit der Videobeschreibung fast sparen 😁

[@anh_em_Long-An]

Tôi rất thích lego của cobi, nhưng tôi là người Việt Nam nên cobi quá đắt so với túi tiền của tôi

[@WassupPMH]

The hull is of a churchill 1 but the turret looks like a churchill 3 or 7

[@kotikvtanke2349]

It's Churchill III, not I. It's from the Churchill I in WoT that has a Churchill III turret.

[@PanzeDivision]

This is a Churchill I with a Churchill III turret and a Churchill VI or VII gun. In short, this is a fabrication of WoT.

[@liammorgan3282]

They even gave it the wrong turret. That's a Cromwell turret if i'm not mistaken

[@kotikvtanke2349]

Nope. It's the Churchill III turret.

[@yearlybricks]

You forgot the M 24 Chafee

[@tinluonggia8260]

like

[@marcusjenkins7051]

4:44 did anyone else keep getting that weird screen glitch

[@thesecretlord2819]

Nice tank small gun tho 😂

[@thegreatskinkpriest8104]

For a knock off model like this, I’d personally have no qualms in using super glue for stubborn connection points

[@thatrandomguyontheinternet2477]

Fun fact : This thing costs 57 euro’s

[@Sathurnine]

I got it for 30

[@odaniel876]

@@Sathurnine me too

[@odaniel876]

I got for 30 dollars

[@kleberchannel6363]

I saw the price and it was R$100,00 or $ 25,00 R$ Is Brazilian Real.

[@thatrandomguyontheinternet2477]

@@kleberchannel6363 where did you find it at that price ?

[@TheTankArtist]

But it's better in appearance

[@lalaline4731]

Where does this Cobi Legos buy?

[@mariostherm4689]

Poland

[@mariostherm4689]

U can buy cobi at poland

[@lalaline4731]

@@mariostherm4689 no what app.

[@zergling05]

@@lalaline4731 this is not Lego and also not Cobi. You can buy Cobi in Poland and Lego in Denmark or in toy shops or online shops directly from the manufacturer. The one shown here is from QuanGuan, you can buy it in China or in online shops

[@BrickMeet]

Read the description

[@DjFlug26]

Also der Panzer sieht ja schon echt Chick aus , aber der Turm ist falsch........ der würde zu einem Churchill Mk. III Passen......... das Gehschütz ist auch zu Groß. Der Mk I hatte das MK II 2 Poundr und war daher Dünner und Kürzer. Die Mündungsbremse hier Passt zum Panther oder Panzer IV G bis J ggf auch für den Tiger 1 und 2.

[@ernstbusch179]

Das ist aber kein Churchill MK. 1, der Turm ist nämlich der eines Mk.3 oder später

[@PanzeDivision]

This is a Churchill I with a Churchill III turret and a Churchill VI or VII gun. In short, this is a fabrication of WoT.)

[@BruceWayne_87]

I just built their cromwell. All i can say it reminded me of the old mannequin from our local shopping mall. “it looks good but feels so bad” you get what you pay for.. I am not that satisfied

[@anh_em_Long-An]

Tôi rất thích lego của cobi, nhưng tôi là người Việt Nam Tôi rất thích lego của cobi, nhưng tôi là người Việt Nam nên cobi quá đắt so với túi tiền của tôi nên cobi quá đắt so với túi tiền của Tôi rất thích lego của cobi, nhưng tôi là người Việt Nam nên cobi quá đắt so với túi tiền của tôi tôi

[@olivetheguy2234]

i feel like quanguan's quality really beefed up over time, they're getting better and better

[@alcovarjr.dearroz7733]

She just throw the pieces and it just stay🤣🤣🤣🤣🤣

[@reginaldoferreira5891]

I KNOW IT HAVE FIGURES CUZ I SEE IT IN SHOPPEE

[@user-sg9kp8sy2h]

何故パーツを投げつけるように組むのか意味不明、気になって内容も良く見てない。

[@A-K-K-47]

Ok now, I’m not hating on ur channel and the company cuz I luv ur channel but uhm… the Churchill is inaccurate… it doesn’t have the smoke clearence attachment on the barrel and also doesnt have an extra MG on the commanders capolla EDIT: it would definitely look better on Churchill VII but just remove the capolla MG and the Churchill 1 model is very accurate as it even has the cannon the hull!

[@fredy_traite]

Pls sand me a lego tank pls

[@zergling05]

are there any Lego tanks? I don't think *BrickMeet* has any Lego at all, anyway you can see many brands on his channel but Lego not yet

[@TheTankArtist]

They copy alot of cobi bricks

[@blindshoot3344]

Wrong gun. This a 75mm, and it should be a 40mm

[@jacekprzyby5609]

a copy from cobi

[@mikasollie6503]

They litterly steal bricks from Lego,sluban and cobi!

[@Big_potater]

Horrible box design 🤮🤮