Citroen Peugeot 1.6 Hdi fuel pressure codes P0087, P0093, P1113 .Diagnose and repair.

‪@rpsspain1966‬ go through the process, of diagnosing and repairing fuel pressure fault including replacing the fuel filter on this Citroen Berlingo 1.6 Hdi, this engine is used in Peugeots and BMW mini as well.
Hope you enjoy.

[@giuliano6993]

Thanks

[@rpsspain1966]

No problem

[@brendanmorgan8832]

I have changed my fuel filter but I still have code p0087. Also when I driving the van will cut out after 15mins and then will start again as soon as im stationary. I’m van starts first time every time. Any ideas please. Thanks

[@rpsspain1966]

I can not do internet diagnosis, you need to graph desired fuel pressure with actual fuel pressure values and see if the fuel pressure sensor is dropping out

[@brendanmorgan8832]

Ok. Well now the codes have gone but still going into limp mode. What do you think it could be

[@rpsspain1966]

As I said, you need to get the live data.

[@mykey_91]

My van doing the same thing, did you manage to fix?

[@thierryreginembezele6639]

You should have changed the fuel pressure sensor cause he is the one sending bad signal to the ECU. I did it on my own and the problem has been solved.

[@rpsspain1966]

Why? As you can see from the graph of data the problem was the fuel filter, please be mindful that a code will have more than one solution. In your case it was the pressure sensor, in this case it was the fuel filter, much cheaper repair than a pressure sensor.

[@digitmasters3076]

Спасибо. На Ксара Пикассо помогло.

[@rpsspain1966]

welcome