Chimney Leak Repair Flashing

How to seal the flashing on a chimney that is causing a leak. I explain how the flashing works and why it fails. See how to fix this problem on any chimney.
Turbo Poly Seal - bergstromm.com/
FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post.
0:00 Chimney Leak Repair
0:17 Field Stone Chimney
0:27 Skirt flashing
0:42 The Real leak is from...
1:10 Explaining how flashing works
2:18 How to seal the flashing
4:27 Showing an Old Repair with Turbo Poly Seal
#chimney repair
#leak repair

[@Dean_WeAreTheShow]

Thanks for the channel, recently did my first torch down to finally end the leak nightmares on my loft. It was 4 layers of torch covered by a layer of epdm a guy (local kid, son of a contractor who cut every corner possible) did last year all on rotted decking. we (me and a buddy) tore the whole thing off (11x20 area) , all new insulation, decking, paper, base layer and a torch membrane. No more leaks, no more ponding and no more thin innertube up there that never kept out the water. I would have never had the confidence to try if it wasn’t for your channel and my girl and I could not be happier with the results. We literally had buckets up there and a dehumidifier running 24/7 all winter because the kid couldn’t find or fix the leaks (could have been stretched seams over bad decking, could have been the termination bar he screwed directly into our caps… such a nightmare 😂) anyway, just wanted to say thank you

[@Dafprinces1]

Excelente!!!

[@777cygnus]

❤️this guy 😎👍

[@chrisrepairscolorado]

If you really want to repair it properly then I would recommend replacing the reglet (skirt flashing). I also understand that the repair sometimes dictates what the client can afford.

[@soyelmohammed2657]

hi sir how long that proact last once it's open

[@raymondjr.1080]

Great explanation, where do I get me some of this Triple poly seal?

[@henrir4362]

does it also stick to the bitumen tape slippery side or should that be removed`?

[@jamesthompson8975]

How do I seal around. Roof vent boots on metal roof

[@MrMoss786]

Looks easy but roof work is torture on the knees.

[@mochouinard]

The part where you show a 2 year old job doesn't look good(around 4:45). You can see hole, and also some uv damage to it. I really wouldn't want my repair to look like this after only 2 years !!!