I've done around 20 dash boards on fiesta Step one take both seats out T20/30/45 screw driver, pick and a ten MM long socket from halfords box Under the knee bag u have to unbolt the ten MM, to get 3/8 ratchet on and a long ten MM it's a ball ache and if u have a halfords box works perfect. I think yours has climate so heater controls should be easy But if not get under dash and unclip red cable on drivers heater matrix Green wire on passenger matrix Everything else is self explanatory Module is near handbrake but it has to be same code I repaired some pre facelift fiesta and modules had diff variations for curtain air bags etc It's a pre facelift dash so be no more than £200 and match the colour don't get black Seat belts are the same but get them in a kit don't buy separate Replace the screen after the dash so u don't break it Also there's a wire on the slam panel with a plug, still be on your old panel, won't reset without that going back on so don't forget Any money under the centre console is mine
@ResurwreckAutosUK4 жыл бұрын
Adam Connell hi mate thanks for all a lot of useful information
@HazzardN4 жыл бұрын
Great to see another project. Looking forward to see more and know what happened with the Mini. Good luck Mark
@Mr_Dimplezz4 жыл бұрын
The storm just arrived in West Yorkshire now mate. So batton down the hatches and wat h some awesome content of rebuilding cars trucks and fire engines 😏 ☺. Keep going broski these videos are all I watch got rid of the TV.
@roofdownfun4 жыл бұрын
Hope it doesn't make it's way to me in East Yorkshire? It's windy here on the coast but no rain.
@ResurwreckAutosUK4 жыл бұрын
Hi pall stay safe mother nature can be hard on us some times
@ResurwreckAutosUK4 жыл бұрын
@@roofdownfun Stay safe buddy
@lardy6004 жыл бұрын
More action. Less waffling
@charleskay16634 жыл бұрын
nice to see newcommers to the salvage game the bummper can be repaired you would be supprised what can be saved things me you and most people would replace i have seen repaired you should go see a caravan salvage repairer you would be amazed at what they can do with fiberglass . blue silicone hoses and aftermarket airfilters look cool but will cost you and devalue the car always keep things standard and original . yes keep the fan keep every salvagable part nut bolt and plastic clip that is not broken o and start from the front end i would leave the dash till the front end was done then get the screen out before the dash as more ease of access
@SalvageDiaries4 жыл бұрын
Nice car looking forward to seeing this come together, looks to be a fairly straight forward repair. If it was me I'd probably cut that lock off
@ResurwreckAutosUK4 жыл бұрын
Hi mate I will cut it off don't think the value is in the car any more for the thieves so might just leave it off
@SalvageDiaries4 жыл бұрын
@@ResurwreckAutosUK my thoughts exactly. They are easy enough to relocate. Gives the new owner something to do if they wanted
@roofdownfun4 жыл бұрын
That's looking good, just don't rush it I'd say from past experience, if it was me I'd perhaps look for a new box with keys and cut the old one off, as for the k&n go for it. I miss doing the odd damage repairable (new place has no garage) so enjoy watching others do them now. 👍
@ResurwreckAutosUK4 жыл бұрын
Hi mate i will probably get a new box for it and its a shame you haven't got the room to do it your self
@roofdownfun4 жыл бұрын
@@ResurwreckAutosUK yep, but il get another one built when I can👍
@alexdalgleish10614 жыл бұрын
V5 reg documents don't have previous keeper details anymore.
@ResurwreckAutosUK4 жыл бұрын
OK thanks mate how else can i find them any ideas
@alexdalgleish10614 жыл бұрын
@@ResurwreckAutosUK nothing in car at all that you can see?! Did car come with a V5 as if old style previous keeper still on. If form V62 from P.O. because isn't one, you'll struggle that way. I believe can use proof of ownership to print entire MOT history online, I mean proper individual ones on blank bits of A4. That would give issuing MOT station address, which could be garage you could ring, email or go round with box of "Celebrations". If main dealer (unlikely) you can access service history online I believe. Possible a key shop could try and cut you something that will unlock obd box. Cars For Paul on KZbin uses "Forscan" to reset stuff. He's commuting in a Fiesta ST. He did up a Ford Ka too. Again, someone you can reach out to.
@ResurwreckAutosUK4 жыл бұрын
@@alexdalgleish1061 Thanks pall i will reach out to paul aswell no paper in the car at all no v5 with the car so had to do a v62 i had a look at the mot history didn't think to see what mot station it was i will check that out need to do some digging on this one thanks pall
@makavelimotorsport61654 жыл бұрын
Alex Dalgleish I’ve done this before a lot of people have service and mot together
@SeriousAboutSalvage4 жыл бұрын
Careful with that aircon gas its very toxic! Also id be repairing that bumper, i followed a guide on a channel called mad for motors when i repaired my corsa vxr bumper, give it ago mate it aint that hard 👍
@ResurwreckAutosUK4 жыл бұрын
Hi phil i will try that thanks pall
@mikejones-uw7rp4 жыл бұрын
that's what I said on the first vid on this car that bumper is fixable...
@lardy6004 жыл бұрын
Toxic and should be taken out with machine not to atmosphere!
@scorcha1004 жыл бұрын
Keep everything as standard as upgrades cos more and tend to devalue the car when reselling. Minimum outlay, maximum profit 👌🏾
@russellbray30594 жыл бұрын
Think you may find obd lockbox key hidden in car somewhere. Under boot trim, under seat, taped under glove box etc. Would make sense to keep it in car but well hidden. Good luck.
@ResurwreckAutosUK4 жыл бұрын
Russell Bray hi mate thanks for that didn’t even think of that I will have a good look around 👍
@andrewarmstrong9654 жыл бұрын
Forgot to add earlier re the front bumper lower spoiler instead of trying to drill holes ect where the metal clips fit,just bond it on with a good plastic glue.
@ResurwreckAutosUK4 жыл бұрын
Hi mate I was thinking the same thing just don't trust the glue on its own
@andrewarmstrong9654 жыл бұрын
@@ResurwreckAutosUK There's glues now out that's as strong as welding,I bonded my side skirts to my Ltd edition fiesta years ago and still holding strong and totally paintable
@ResurwreckAutosUK4 жыл бұрын
Andrew Armstrong thanks pall I will see what I can find 👍
@deanphillips24504 жыл бұрын
See if you can get an st. Bumper for it and see if there's any lock numbers on the obd box so you can get the hex key cut for it.
@ResurwreckAutosUK4 жыл бұрын
Thanks mate i will have a look on the box had a look on ebay cost is about £150
@paulbingham89214 жыл бұрын
word of warning that part you took off from behind the steering wheel you turned with your finger has got to match with the steering wheel its called a squib if your wheels are straight then wind it fully to left count turns and half them otherwise you will damage it make sure your steering wheel is straight before resembly
@ResurwreckAutosUK4 жыл бұрын
paul bingham hi mate thanks for that I will definitely do that 👍
@alexdalgleish10614 жыл бұрын
Undamaged air filter worth £20, so keep standard. Maybe find Ford breaker near you and get replacement air box and any other bits you need. Or ebay search.
@ResurwreckAutosUK4 жыл бұрын
Hi Alex i will probably get of ebay just thought it might be more appealing to buyers having a upgrade one
@scorcha1004 жыл бұрын
As for the obd box try a company called ProtectAVan who are based in Grays in Essex. They sell these boxes and may be able to cut a key to fit it. Protectavan.co.uk 👍🏾
@scoobi34004 жыл бұрын
Can you not have a go at repairing the bumper. The split looks an easy repair and the rest may go back into shape once refitted with a little help from a heat gun. Plastic weld the split using a soldering iron and melt in some metal ties (old paper clips work well) from the back. Have a go mate all you have to lose is a bit of time and may save a few quid. Good luck
@ResurwreckAutosUK4 жыл бұрын
Hi pall you are right might just try and fi this one see how i get on thanks for the idea
@chrisfisher49044 жыл бұрын
If you want to keep the parts cost down I would look for a breakers yard in your locale. I have used them in the past, serviceable bits at a really low cost. Be careful with the aircon its dodgy stuff. You will need a professional recharge when rebuilding.
@ResurwreckAutosUK4 жыл бұрын
Chris Fisher hi mate thanks I will check out the breakers and I will get the air con done from a professional thanks
@jamespugh70424 жыл бұрын
I also follow rob and a guy called cars for paul both done fiestas see if they have any spare parts also keep standard as st are only worth mods but you can see that on steve channel think hes called spark plug steve hes done loads to his st also a lad called phil salvage rebuilds is doing one aswell
@andrewarmstrong9654 жыл бұрын
Always keep any nuts bolts plastic pieces anything that's on any parts your going to throw out thinking the parts no good price of things soon add up
@alexdalgleish10614 жыл бұрын
Think Rob at Salvage Rebuilds can accept pm's on Instagram. Think he'd help out where he can. You can only ask. Think he's documented half a dozen Fiesta projects. Nothing he doesn't know by now.
@ResurwreckAutosUK4 жыл бұрын
Hi mate i will reach out to rob he does know his stuff on fiesta thanks pall
@mickrepairscars90044 жыл бұрын
Great vid mate. Have a look at the Mk7 fiesta St front bumpers, I think they're same fitting as the S which are very rare to find. It might be a idea to order a replacement dash asap so you can see where the remaining bolts are that need undoing. Plenty of complete slam panels on flea Bay inc radiators. Stick to OEM bits unless you are going to keep the car, sports mods wont make it worth anymore money pal. Mick
@ResurwreckAutosUK4 жыл бұрын
Hi mick thanks for the advice i will try finding bonnet and bumper in colour if not going to get them new then paint them