Рет қаралды 12,090
Correx Wing Build. How to build a correx wing with a single sheet of correx.
I used a 120cm x 60cm piece which I then cut down to 120 x 35cm.
The 35 cm consists of 15cm for the lower surface, 1cm for the leading edge fold plus another 15cm for the upper surface and finally 4cm for the control surfaces/ailerons.
I purchased the sheet from a local hardware store for around R50 ($3)
Tools required:
cutting blade
hot glue gun
ruler/straight edge
carbon fibre wing spar(not vital)
#CorrexWingBuild #RCPlane