LSA PREP PT4. ACTUATOR/BUTTERFLY ADJUSTMENT FOR MAXIMUM BOOST

Please watch: "(2) LSA Swap (Advantages/Disadvantages) Is The LSA Supercharger Worth it?? "
• LSA Swap (Advantages/D... -~-
Terry explains and sets up his LSA actuator and adjust the boost control butterfly to achieve maximum boost from the LSA install.

[@DennisMurphey]

Excellent Tip, I had my LSA installed at a good shop but I already found help in your video. I had 3 PSI of boost on this LS3. Vacuum hoses were not changed correctly, now 8 PSI. So now I want to verify the pressure relief valve is set correctly as you show here. I am learning from you stuff, appreciate it. Old Dog can learn from young pup Huh!

[@Coverman66]

Ahhh thanks Brotha Dennis.. glad you got that extra 5psi back.. now you be careful out there lolol

[@speedfreak1161]

Cool bro , i just used the allen key to adjust the grub screw , backed it off untill you could see daylight between the actuator plate and the grubscrew then just screewed the grub screw in ever so little untill it just touched the actuator plate. Thanks for showing me this loss of boost , you the man 💪😁🇦🇺

[@Coverman66]

no problem.. where are you from brotha Speed?

[@speedfreak1161]

@@Coverman66 Australia 😁🇦🇺

[@SnowCamo45]

This is the best one you've done yet Terry! Awesomeness man!

[@Coverman66]

much appreciated brotha Ceasar.. glad you enjoy them..

[@5533851]

Great vid. An LS crazed amigo is always looking to retain that sweet, sweet boost!

[@thewerxshop0486]

Good tip!! Lost boost due to improper setup can be a pain to diagnose when you think you've got the actuator adjusted properly.

[@Coverman66]

thanks man, i like to try to say people heartache and headaches

[@pFbSpecV]

Well done! Your sharing the knowledge for sure!!!

[@nickmahramus5034]

Why am awake this late I don't know... but did I learn something yes... yes I did

[@Coverman66]

mich appreciated brotha Nick.. any questions ask away..

[@OhMar1210]

Can't wait to see that running 😀

[@Coverman66]

you know i cant wait Mar.. lolol whats good..

[@OhMar1210]

coverman66 I haven't been to one car show yet 😒 Using all my free time to get this ride ready for this Summer... Today, day one of Summer. Hopefully we'll be out riding soon.

[@Coverman66]

fingers crossed man.. let me know about that shifter if you still need it..

[@OhMar1210]

Dam. I misunderstood.😫I thought the shifter you had was being used in the 67. I have one coming in the mail. Thanks bro. Appreciate it! 😀

[@juiced71]

Cool hope you get her done terry! Looks like your getting close! You gonna throw it back on the dyno ? What car show you trying to get to ? Would love to try and make it would be cool to see the car and shake your hand👍

[@Coverman66]

it would be my pleasure.. i like bear mountain and whiskey cafe shows.. come one out, let me know.. thanks brotha juiced..

[@juiced71]

coverman66 will do my friend 👍

[@JoseSanchez-in9ik]

hello amigo🙋🙋, im doing a swap, blue and green pcm. I want to connect my stock 2000 Tahoe Limited​ OBS gages but I'm having trouble identifying​ what color wire goes to which Gage. Can anyone help identify the wires from my cluster since mine been cut? thanks you!!!!!!!!

[@feedinc2735]

Get it on the road bro!

[@Coverman66]

lolol you know im working it brotha.. loll whats good Feedinc

[@zachkrebs1279]

Terry I have a cammed ls2 with headers. I just installed a LSA blower. I’m only making 3-4lbs of boost. 500whp on the dyno. My upper pulley is a 2.4” and my crank is a 6.25” (25% underdrive). But my blower ratio is still a 2.6. So why am I only making 3-4lbs instead of 7-9lbs? Help please

[@tampatuning]

thank you terry

[@Coverman66]

my pleasure Brotha Tampa..

[@kramerroberts549]

thanks for the great views

[@Coverman66]

my pleasure brotha..

[@roberthanna4400]

Nice love It bro!!

[@Coverman66]

my man Robert..

[@roberthanna4400]

coverman66 i have a set of 823s came off a 6.2l with a lower end knock they look new what would you do to them before installation?? and I'm kind of on the fence with my motor it has like 189 on it but it runs really good don't know if I should go through it or just slap the heads on and a cam in it

[@robintaylor1490]

Thank you !!!

[@Coverman66]

my pleasure Robin..

[@deepgrooves74]

Yo coverman66 Love the video! You going to my gym on Sunday?

[@mrchams]

Do you think I would need to do this on a factory setup? If so, I'm assuming I would need to also check the mapping after ?

[@Coverman66]

no, there are alot of ways to make it work with out hunting down all the factory accessories

[@alonzofloyd8140]

Nice Bro

[@JH-nf3fu]

Did the valve come cracked open like that from the factory?

[@Coverman66]

yes, i guess to be used are a blow off.. im not sure..

[@jessegarcia704]

LS1 with the lsa or should I just get a 6.0, I already have the LS1

[@Coverman66]

id work with what i have Jesse..

[@justingordon2293]

1x for the algorithm

[@ryanbarbolt3691]

I love you man, but you have to stop with the snooooot, It's a snout. Nothin but love.

[@Coverman66]

lolol the snoot/snout is for a buddy that always goes around correcting people so its a silent dig at him. he needs to not take life so serious, stop and smell the roses and see the beauty around him instead of pointing out the negative..