Craftsman Pressure Washer - Full Tune Up!

[@czarguzman2927]

This is a great step by step video on how to carb clean and oil maintenance on pressure washer. Video and audio is sharp and clear. Thanks for your vital information and for taking the time to demonstrate.

[@EliminatorPerformance]

Thanks for watching!

[@jmays]

Great video! Fixed the same pressure washer that someone put on the sidewalk with a take me free sign. Cleaned carb and changed oil runs fantastic.

[@krishaley5502]

Dude I am really impressed with the commentary and editing of this video! I just picked up one of these pressure washers, wanted to see what’s inside before I dig in, and this video is perfect!

[@bradmcewen]

One of the most well done, step by step tutorials I've seen.

[@EliminatorPerformance]

Thanks for watching!

[@marksmith323]

Great video! Your closeups and details are fantastic!

[@EliminatorPerformance]

Thank you!

[@jh4193]

Excellent video. The information and closeups were invaluable in helping me resolve my washer problem. Thanks so much. now a fan

[@EliminatorPerformance]

Thanks for watching!

[@scottjacobs9442]

Great tips. Thanks for walking us through all phases of the tuneup.

[@EliminatorPerformance]

Thanks for the kind words!

[@ruivasconcelos7003]

Thanks very much for how you described all the steps to do this job.The best video..:) thanks again.

[@EliminatorPerformance]

Thanks for watching!

[@haleyinlr]

I really learned from this video. It was great!!

[@brunonudo3238]

Really informative and professional, thanks

[@waynestefinashen239]

Dude nice video, like the use of the shut off valve on the fuel line while you worked on the engine. Maybe a future video on winterizing a 4 stroke pressure washer would be good for the Eliminators that live in cold weather areas since there are lots of pressure washers for sale with cracked pumps.

[@yourselfdotcomlol]

Using a drain valve as a plug and drain. Thank you. I use the special clamps and have several sizes but i love that hack. Cheers!

[@charlesjohnson4656]

Thank you . Very informative

[@danielsbackforty8094]

GREAT NO NONSENSE AND GET TO THE POINT VIDEO!!

[@EliminatorPerformance]

Thanks for watching!

[@fjeepers]

Excellent info! Thank you!

[@EliminatorPerformance]

Thanks for watching!

[@Ken_Stauder]

Thanks for your well done and descriptive instruction video. Easy to follow and good tips along the way.

[@EliminatorPerformance]

Thanks for the kind words!

[@nickk3765]

Good info, thanks for making this!

[@EliminatorPerformance]

Thank you!

[@larryfulton7619]

Nice video, good lighting and explanation (you sound like you are Canadian!)…

[@EliminatorPerformance]

Yes from Southern Ontario Canada, thanks for watching!

[@jorgegaj6236]

Fantastic video. I have a Quantum gold 6.0 pressure washer that sat in my garage for 5 years. I'm replacing the carburator, the filter, and the spark plug. How do you best clean the gasoline tank? any other suggestions ? many thanks

[@RowenMyBoat]

I just bought a Craftsman pressure washer with the same engine at an auction $50. It has a full tank of gas and the oil looks very dark, not sure if that’s okay or not, only seen vehicle oil, but I wanted to try to give it a tuneup before trying to start it. I don’t know where that hare-brain idea came from, but I am woman, let’s see if I can meow my way through this. Terrified but looks like a wonderfully detailed and thorough video! Wish me luck, please!

[@Gods-Elect]

Did you get it going☺

[@DestinyA83]

Thanks a ton!! Was able to get mine back up and running. The carb was horrible. The spring was missing but I don't know how (the one that you said to be careful not to let it detach) I bought a generic one and used it and it is working but I am not sure if it is connected to the right spot. But it is working so oh well I guess lol

[@EliminatorPerformance]

Glad to hear it's working, thanks for watching!

[@zmanvideo1]

great video!! good tip on adding oil

[@EliminatorPerformance]

zmanvideo1 thanks!

[@noneofyourbusiness243]

Amazing Video, Thumbs UP! I see you're a fellow Ontarian based on your license plates in the background. You've got a new Subscriber!

[@EliminatorPerformance]

Southern Ontario, Niagara Region

[@angelodaurora9218]

Eliminator Performance Stoney Creek Ontario for me, not too far

[@stevenpadin-aquinop.e.154]

Thanks for the detailed video. I had the same situation with the jet nut gasket which was broken. Can you tell me the replacement part number so I can find it? Seems to be different ones available and I just don't want to guess. For the moment I'm using a piece of cardboard to avoid the gas to leak but I wish to replace it anyway.

[@duellcollins7989]

I wanted to ask you a question man about this particular model. I noticed the pump has a air hose attachment. What is that for?

[@oslerpereira6380]

Nice thanks for video

[@rickmarti9797]

Just want to add when you spray carb cleaner into carb be sure to wear safety glasses. The spray can bounce back into your eyes.

[@josephklekotka4876]

I have a craftmen 7.0 ohv and I changed the oil and put to much in it and went to drain some out from the drain plug and not oil comes out...? Any thoughts on what's going on.

[@MegaRamontorres]

muy buen video. ese sabe lo que hace.

[@EliminatorPerformance]

Ramon Torres Gracias ramon

[@Elegantaura1]

Awesome Video!

[@EliminatorPerformance]

Thanks for watching!

[@Backroadmuscle]

There's also an issue with them power washers the dip stick seal stops working and it leaks but I fixed mine with rtv

[@bobbyvszquez6058]

Great

[@boreed5734]

Mine is running a little rough after sitting for a few years. I didn't take the carburetor completely loose but I took off the bowl, cleaned it, replaced the fuel tank which was cracked, cleaned spark plug, installed new filter. But it still running a little rough. I sprayed what I could but I'm wondering if the carburetor still has some residue left inside it keeping it from running smoothly. And yes, the gas smelled of turpentine and was yellow. What are your suggestions?

[@HectorGarcia-vu9pn]

Do you have a video on how to replace the rubber feet?

[@sauceman5616]

Where do you change the oil for the water pump?

[@dwwd156]

It's actually not a "air vane governor". The actual governor is mechanical, the linkage goes toward the other end of the engine. All that air vane does is control the choke through a thermostat attached to the muffler. Great vid.

[@mrlastname3065]

I just bought the exact pressure washer. What would make gas pour out of the hose that connects to the back of the air filter housing? The gas line hooks to the carb. This other hose comes from who knows where, but pours gas out of it when I pour gas Into the tank.

[@EliminatorPerformance]

You probably have a leaking needle valve in the carburetor

[@tommylyle6339]

How do I add pump oil

[@mikebenge2853]

Thanks

[@EliminatorPerformance]

Thanks for watching!

[@georgesanchez9971]

I would add a fuel filter and a shut-off valve. Always remember that some carburetors have a special metal coating that prevents rusting. I would think twice about using harsh chemicals.

[@pattayperformance]

Sooooo young ❤️

[@donvoll2580]

Good day I just came across this video. You know canadian tire sells a funnel or did, that will separate water from gas, it's tricky but it will keep fine dirt out. Thanks

[@EliminatorPerformance]

Yes, water settles to the bottom so it's possible to suck the fuel out from the top. For the price of fuel, and labour if I had to redo my work, we just replace the fuel.

[@donvoll2580]

@@EliminatorPerformance but more people should be using funnel when putting gas into machine Thanks

[@samuelvelez1643]

It won't hurt having an extra fuel filter between the fuel tank and the carburetor... Just for extra insurance

[@gameondude3617]

I got the same pressure washer out of my neighbors trash and doesn't have the air filter housing can you link me to parts? Also need the o rings for the carb and bowl

[@EliminatorPerformance]

No idea, this unit was a customers. Goodle the engines model number, or check the description in this video, it might be there!

[@gameondude3617]

@@EliminatorPerformance ok thanks my dad got it to run but leaks gas out of the bowl and now we can't get it running again going to try and clean the injector and bowl again.. lol

[@EliminatorPerformance]

@@gameondude3617 needle valve needs to be replaced!

[@gameondude3617]

@@EliminatorPerformance how hard is that?

[@EliminatorPerformance]

@@gameondude3617 you and your dad should check this video out. It's a little long, but there's good info here! kzbin.info/www/bejne/aaPMY5KYgM6og9E

[@vernonkaris1524]

Hi I'm Vernon my engine runs great but I'm not getting pressure on the water it's very low can you help me ty

[@Angelotiangel]

Hi Is a 2000 psi 1.9 gmp powerful enough to clean a concrete driveway? Tx

[@EliminatorPerformance]

Not if you want to get it down to bare concrete, you'll find yourself going over spots you already cleaned. I'd recommend something more powerful, a 2500psi or more.

[@Angelotiangel]

Ok Thank you for your advise Have a nice day

[@hammer5859]

I have the same model and it's leaking a little water from the pump on the left side if your facing it.

[@EliminatorPerformance]

If you live in an area where it gets cold in the winter, and didn't store it in a warm area, you may have a crack in the pump. Water inside will freeze and expand, and crack the aluminum or plastic housing.

[@hammer5859]

I'm in southe California I was thinking it might be an o ring just was wondering if that's normal for this model I just bought it used.

[@EliminatorPerformance]

@@hammer5859 I'm not to sure to be honest, I worked on this for a customer of mine, just needed a tune up and didn't leak. It's possible that one of the o-rings have gone, go to www.ereplacementparts.com and type in your model number. You should be able to get a good diagram.

[@hammer5859]

I took it apart and replaced the 3 o rings it stopped leaking. Thank you for your help!

[@mastglobal3297]

Any idea what would cause this same pressure washer to have half the power it did. Engine runs like a champ but when I engage the water its half the pressure of what it was new and Its only 10 months old.

[@EliminatorPerformance]

Look up Unloader valve issues

[@jerrykegel2678]

What part # covers the bowl gasket and the robber Orin's on the intake?

[@EliminatorPerformance]

Look them up here: www.jackssmallengines.com/jacks-parts-lookup/manufacturer/briggs-stratton/100000-19z999-series/126m00-to-126m99/126m02-0344-f1

[@michaeljude1965]

Is there a common replacement for the bowl nut gasket? hose things are expensive . I am wondering if there is a fibre washer that works as good, and what size to order? I have even heard old milk jugs work ok, but a lot of work :)

[@EliminatorPerformance]

Cereal box would work too if you were in a pinch. Here is the official part # : 271716 It's a common part for Briggs and Stratton and Toro machines.

[@craftman5632]

@@EliminatorPerformance I just put the jet bolt back on with out the fiber washer work just fine no leaks. Same with my craftsman snow blower.

[@flanalan]

Moto Master!?! Canadian, eh?

[@ld7416]

How did u know what to gap it to? Mine is similar engine --same brand n mine says gap @ 25

[@ld7416]

I mean 20

[@craftman5632]

@@ld7416 30

[@garyjones709]

Where to buy replacement air filter?

[@EliminatorPerformance]

US: Paper Filter - amzn.to/2xjhXQY Foam Filter - amzn.to/2Mzd0Jh Canada: Paper Filter - www.amazon.ca/HIPA-491588S-Stratton-625-675-3-5-6-75/dp/B07CG9R54F/ref=mp_s_a_1_1?ie=UTF8&qid=1537044798&sr=8-1-spons&pi=AC_SX236_SY340_FMwebp_QL65&keywords=491588s&psc=1 Foam Filter - www.amazon.ca/HIPA-797301-Filter-Stratton-675-875/dp/B07D98ZTN5/ref=mp_s_a_1_6?ie=UTF8&qid=1537044751&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=797301&dpPl=1&dpID=41lgT3ASLLL&ref=plSrch

[@jamesmock7259]

I take it there's no fuel pump for this>? I picked the same washer up from a guy down the road said it needed a pump cause it didn't run did NOT specify.. Sooo I assumed it was a fuel pump maybe did some research and amazon said it needed this 808656 Mechanical Fuel Pump by Briggs & Stratton BUT now I'm thinking it needed a pressure washer pump and that cost way more. Stupid me for not realizing sooner... I am not mechanic savvy lol

[@lecyalphamaids9134]

getting water thru the SYSTEM but looks like the gun won't allow water thru it, how difficult is it to find one, and what do they run, as in cost? I own a Briggs and Stratton I own a troy bit 175cc 7.75hp 2700PSI engine year is built in 2013. thank you. looks like the GUN has about five philips screw heads in it, is it rebuildable?

[@EliminatorPerformance]

Take the line apart and run some compressor air through it to make sure there's no clogs..Also, take off the end fitting if possible, if not, let the tip sit in some CLR over night to remove any calcium deposits! Hope this helps

[@lecyalphamaids9134]

[EDITED-I will take that tip off, and I have a air compressor so i will be using that for what you suggested, need to buy some CLR though, don't think i have any of that, i know what it though, also, the AIRFILTER is dirty, it is the spongy thing attached to the CARB, right? ALSO, i bought a new CARB for it, and this new one has an inline gas filter that the old one didn't have, so i will be adding that, thank you for all of your help, you are awesome.]

[@lecyalphamaids9134]

Got it, running and all, could not do it without you brother, hope ya don't mind me saying that. BRAND NEW CARB, after turning the water on, and trying to start it, it started and the GUN and tip all work fine, it is awesome feeling when that thing cranks, aint it? i think it is. got a new air filter also, and also an inline GAS FILTER, [that came with the new CARB. HEYA EVERYONE, i strongly say to you all, get a new CARB instead of trying to clean the old one, leave it be until you get it all going, it will be much easier, on your stress level and all, please believe me. Then after you get it all going then go after the old CARB if anything you'll have it when you need to deal with this issue again, just swap it all out then again clean the CARB. and don't forget the SPARK PLUG, if dirty, just get a clean new one, cost aint all that bad. good luck everyone, and please join this youtube VIDEO, i think he deserves your support, and an awesome big thank you to, Eliminator Performance for making that video and for helping me and all of us out here!

[@JasonSmith-qx3zh]

A job for Dremmel!!!

[@efrainromero6258]

Goooood video!

[@EliminatorPerformance]

Thank you, don't forget to subscribe if you haven't already!

[@oonaholt7229]

where is the oil plug please tell me

[@EliminatorPerformance]

Some don't have oil plug, usually you flip them up or use an oil extractor. Like this: m.kzbin.info/www/bejne/imjKZoN3n9ebZ5I#

[@PAgeologist99]

Leave it to the geniuses at Craftsman and Briggs and Stratton to not put an oil plug on an engine.

[@beingsneaky]

fuel bowl. carb bowl.. never heard it called a sediment bowl before..

[@EliminatorPerformance]

That's where all the sediment goes to (the bottom) at the end of the day they're all correct terms!

[@alanlisting2080]

On the farm that's what we always called it. Collected the shit so you could drain it periodically to drain the sediment crap.

[@Jake-jw3sk]

@@alanlisting2080 lol

[@ralphgwilson2388]

Just put a 1/2 quart in the damn thing and check the oil level on the dip stick and go from there. Milli liters my ass

[@efrainromero6258]

Where you live?

[@EliminatorPerformance]

Southern Ontario!

[@jasonmichaels614]

You have alot to learn!!! The top cover is NOT called a shroud! It's just a Cover!! Also, it's an ENGINE, NOT a motor. Next, it's just called a air vane and NOT an air vane govenor!!! Learn to get the terms correct, I'm sick of people calling things the wrong thing!!

[@SVTPalacios]

Jason Michaels chill dude

[@MegaRamontorres]

muy buen video. ese sabe lo que hace.

[@MegaRamontorres]

muy buen video. ese sabe lo que hace.