🟠 Multi Filament System for Creality K1 and K1C: kzbin.info/www/bejne/sIjCfYSKjNiiiNU 🟠 Multi Filament System for Creality K1 Max: kzbin.info/www/bejne/Z3bOqoCae92bn80 🟠 Inventor's Garage Store: www.inventorsgarage.store/
@pugnastic72727 күн бұрын
Most underrated 3d printing channel rn 😮😮
@pugnastic72727 күн бұрын
Superb quality content. Thank you
@Jamesn-js1zp3 ай бұрын
Although I have not had any problems with my K1 Max I'm hoping sometime soon Creality offer a K1 Max upgrade kit, a kit that incudes the new hot-end, unicorn nozzles and belt pulleys.
@3DPFactory13 ай бұрын
I recognise the little K1 storage box in the background. Thanks for printing it. 😊
@InventorsGarage3 ай бұрын
My pleasure my friend. It fits perfectly to my mini MFS ;)
@lornelorne57274 ай бұрын
Interesting. Thanks for the info. I wanted to buy the K1 Max, but when the K1C was announced I decided to wait since I figured they'd release a K1C Max soon with the same upgrades. I waited and they announced the K2 Plus, so I figured that was the upgraded version, and I've preordered that now (with 50% off!). But it seems they did actually upgrade the K1 Max directly. If I had known this earlier, I might've bought the "K1C Max".
@johnward65164 ай бұрын
Yep brought a k1 max a week ago and it had the new hot end, thought I was going mad as nothing on the offical website
@martincstee53352 ай бұрын
May I ask where you bought it from? I saw Amazon has two versions of K1 Max, but the official website has only one and no descriptions of these upgrades.
@mvbracing3 ай бұрын
This explains it, I was quite confused when I found this unicorn nozzle in the box of my new K1 Max. Deciding what printer to buy was difficult. If I knew that the K1 Max was being shipped with these upgrades my decision process would have been a lot quicker. Very happy customer so far and the upgrades were a pleasant and very welcome surprise.
@hein_mcleod3 ай бұрын
I can confirm, I bought a K1 max last week and it has the Unicorn nozzle, LiDar sensor, internal camera and the name plate on the bed. Only thing that is missing is the little wiper on the build plate.
@martincstee53352 ай бұрын
May I ask where you bought it from? I saw Amazon has two versions of K1 Max.
@lucafortini47112 ай бұрын
I want to scream, i got the k1 max a few months ago and it has all old components :(
@RoofusKit4 ай бұрын
I'm a happy owner of of one of these new "K1C Max." I got the new unicorn nozzle and the smaller pullies on the motors and the new decor plate. I'm used to this from Creality but i was pleasantly surprised because i had not heard about thia happening yet.
@WillOnParade4 ай бұрын
What vendor did you get your K1 Max from?
@NexGen-3D2 ай бұрын
I have some nice upgrades on printables for the K1C, specifically a fix for the camera lockups, I also have a nice internal filter system for the K1C, also should work on the K1, I just ordered the latest version of the K1 Max and I will have a filter and chamber heater combo upgrade for that one too.
@InventorsGarageАй бұрын
I'd love to see the chamber heater mod, can you share it?
@NexGen-3DАй бұрын
@@InventorsGarage I have on Printables already, but I'll make one specific for the K1 Max once I have it, if you search for NexGen3D on Printables you will find my work, I find that these larger printers need chamber heating, small printers not so much.
@kylestyer82403 ай бұрын
I really hope they offer an upgrade for current customers of the K1 max. Mine is the old design and vfa's arent my favorite thing. Though it seems like an extensive upgrade...
@nickflorent832 ай бұрын
How do I know from looking at the box that it hs all the upgrades? Has the model number changed?
@InventorsGarageАй бұрын
Nothing changed on the box as I know, the only way to know is asking the seller and trust them :/
@nekrosoft132 ай бұрын
My k1 max that I bought in June, arrived with a new nozzle.
@joseluisciruelos83982 ай бұрын
I have facing same problems with the first layer (not over the hotbed) if not the first layer over the support. It seems to be unglued from the rest of the part. Withch parameter you recommend to manage to improve this problem, can you help me?. I'm not so new neither experimented. I'm trying to make technical parts in my K1Max.
@ehrans23 ай бұрын
The problem i notice, is the lack of info on creality store at AliExpress, wich shows the different options of nozzle/hotend for the same printer name, i had to replace the nozzle heater and i was almost picking the wrong one, happily i dissambled the old one first and noticed the difference. Just a question if any did it. New nozzle/heatbreaker/heater/dissipator combo, is just snap off the old model snap in the new one? Or need to change the entire extruder toolhead assembly? I noticed my k1c prints lw-pla easier than my k1max first generation, k1max gets clogged because filament gets foamed inside the heatbreaker/dissipator and goes up to the ptfe tube, and that sugest me some heat is passing to the filament on the ptfe and dissipator transition.
@Immolate624 ай бұрын
Hey I just received a new hot end from Creality for my K1 Max and it definitely is different. It's got the big heat sink on it now. I'll just have to pay attention to the instructions.
@dirty_curty86113 ай бұрын
when and where can i get these upgrades ?
@markperryman7972 ай бұрын
So can I print carbon fiber on my k1 max now then I just ordered it it hasn't arrived yet so I'm just curious rn
@InventorsGarage2 ай бұрын
Hi Mark, if your Creality K1 Max arrives with the unicorn nose, yes, you can.
@markperryman7972 ай бұрын
@@InventorsGarage would u know how I could set that up for orca slicer I didn't see the option on it or would I have to modify my settings to get it
@802Garage4 ай бұрын
The funny thing is... The K1C was basically just an attempt at fixing the K1. They might as well have called it the K1C Max and charged $50 extra just to make the money and increase marketing. They still need to fix their extruder design. Give me a Qidi instead any day.
@colenado4 ай бұрын
Tell me about it! I've never been so frustrated with jams as I have with my K1 Max.
@ThisisDD4 ай бұрын
IMHO the VFA on the original Max is so bad that creality should send out the replacement parts for people that bought one recently and got the old version like myself.
@ashleywhitehead37104 ай бұрын
Yeah I agree. Typical Chinese printer. Designed around the marketing campaign hype.
@TheDIYer2 ай бұрын
do they give that kit to end users too? or just reviewers?
@InventorsGarageАй бұрын
I bought mine K1 Max with those upgrades, no 3D printer brand sponsored my channel, so you can buy it as I did, just ask the seller if the model come with the new upgrades
@TheDIYerАй бұрын
@@InventorsGarageThanks it's so kind of you to reply, when did you buy it sir?
@j1mmy4474 ай бұрын
Nice, but how do they differentiate the versions and settings for different diameter gears for the same model (K1 Max)?
@ashleywhitehead37104 ай бұрын
The rotation distance will be different in the printer.cfg.
@j1mmy4474 ай бұрын
I know, but it was easy with the K1C, how do they solve a factory reset printer config parameter settings because without root you can't modify those
@ashleywhitehead37104 ай бұрын
@@j1mmy447 I'm not sure what your asking but sounds like your asking how did the printer know which version of the firmware to install. It'll be the same as any other, there will be an identifier in the main board that matches the firmware version to the printer.
@Lawrence_Marks4 ай бұрын
The talking to yourself bit was an entertaining idea.
@mesilvestreАй бұрын
Are you Brazilian?
@InventorsGarage17 күн бұрын
Yes, sorry by my bad english LOL, I'm improving it everyday to produce better contents ;)
@lennonalterosa2 ай бұрын
Wesley faz esse vídeo em português rs..... no seu outro canal.
@InventorsGarage2 ай бұрын
Hi Lennon, we already have it, check out the list of videos 😉
@lennonalterosa2 ай бұрын
@@InventorsGarage cara no canal ptbr não achei esse video
@ashleywhitehead37104 ай бұрын
I own a K1 Max, got lured in by the sleek look. If I could make the choice again I would build another Voron instead. This printer has so many flaws that are due to cost cutting design choices it not funny. It's a cheap ass printer with a premium price tag. Challenge yourself and build a Voron people. It's not that hard. By the time you have spent money modding the K1's to be a half way decent printer it will cost you as much as a Voron anyway.